Commit 94cb4ee0 authored by Rostislav Lisovy's avatar Rostislav Lisovy Committed by Brian Norris

mtd: nand: omap: Do not use global variables

Since the commit 97a288ba ("ARM: omap2+: gpmc-nand: Use
dynamic platform_device_alloc()") gpmc-nand driver supports
multiple NAND flash devices connected to the single controller.
Remove global variable to make the code thread-safe.
Signed-off-by: default avatarRostislav Lisovy <lisovy@merica.cz>
Acked-by: default avatarRoger Quadros <rogerq@ti.com>
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
parent e66fcf72
...@@ -144,9 +144,6 @@ static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc, ...@@ -144,9 +144,6 @@ static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc,
0xac, 0x6b, 0xff, 0x99, 0x7b}; 0xac, 0x6b, 0xff, 0x99, 0x7b};
static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10}; static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10};
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
struct omap_nand_info { struct omap_nand_info {
struct nand_hw_control controller; struct nand_hw_control controller;
struct omap_nand_platform_data *pdata; struct omap_nand_platform_data *pdata;
...@@ -168,6 +165,8 @@ struct omap_nand_info { ...@@ -168,6 +165,8 @@ struct omap_nand_info {
u_char *buf; u_char *buf;
int buf_len; int buf_len;
struct gpmc_nand_regs reg; struct gpmc_nand_regs reg;
/* generated at runtime depending on ECC algorithm and layout selected */
struct nand_ecclayout oobinfo;
/* fields specific for BCHx_HW ECC scheme */ /* fields specific for BCHx_HW ECC scheme */
struct device *elm_dev; struct device *elm_dev;
struct device_node *of_node; struct device_node *of_node;
...@@ -1840,7 +1839,7 @@ static int omap_nand_probe(struct platform_device *pdev) ...@@ -1840,7 +1839,7 @@ static int omap_nand_probe(struct platform_device *pdev)
} }
/* populate MTD interface based on ECC scheme */ /* populate MTD interface based on ECC scheme */
ecclayout = &omap_oobinfo; ecclayout = &info->oobinfo;
switch (info->ecc_opt) { switch (info->ecc_opt) {
case OMAP_ECC_HAM1_CODE_SW: case OMAP_ECC_HAM1_CODE_SW:
nand_chip->ecc.mode = NAND_ECC_SOFT; nand_chip->ecc.mode = NAND_ECC_SOFT;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment