bnx2x: Coalesce pr_cont uses and fix DP typos

Uses of pr_cont should be avoided where reasonably possible
because they can be interleaved by other threads and processes.

Coalesce pr_cont uses.

Fix typos, duplicated words and spacing in DP uses caused
by split multi-line formats.  Coalesce some of these
split formats.  Add missing terminating newlines to DP uses.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

@@ -953,15 +953,16 @@ void __bnx2x_link_report(struct bnx2x *bp)
 		netdev_err(bp->dev, "NIC Link is Down\n");
 		return;
 	} else {
+		const char *duplex;
+		const char *flow;
+
 		netif_carrier_on(bp->dev);
-		netdev_info(bp->dev, "NIC Link is Up, ");
-		pr_cont("%d Mbps ", cur_data.line_speed);
 
 		if (test_and_clear_bit(BNX2X_LINK_REPORT_FD,
 				       &cur_data.link_report_flags))
-			pr_cont("full duplex");
+			duplex = "full";
 		else
-			pr_cont("half duplex");
+			duplex = "half";
 
 		/* Handle the FC at the end so that only these flags would be
 		 * possibly set. This way we may easily check if there is no FC
@@ -970,16 +971,19 @@ void __bnx2x_link_report(struct bnx2x *bp)
 		if (cur_data.link_report_flags) {
 			if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
 				     &cur_data.link_report_flags)) {
-				pr_cont(", receive ");
 				if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
 				     &cur_data.link_report_flags))
-					pr_cont("& transmit ");
+					flow = "ON - receive & transmit";
+				else
+					flow = "ON - receive";
 			} else {
-				pr_cont(", transmit ");
+				flow = "ON - transmit";
 			}
-			pr_cont("flow control ON");
+		} else {
+			flow = "none";
 		}
-		pr_cont("\n");
+		netdev_info(bp->dev, "NIC Link is Up, %d Mbps %s duplex, Flow control: %s\n",
+			    cur_data.line_speed, duplex, flow);
 	}
 }
 
@@ -2584,7 +2588,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 
 	/* enable this debug print to view the transmission queue being used
-	DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d",
+	DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d\n",
 	   txq_index, fp_index, txdata_index); */
 
 	/* locate the fastpath and the txdata */
@@ -2593,7 +2597,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* enable this debug print to view the tranmission details
 	DP(BNX2X_MSG_FP,"transmitting packet cid %d fp index %d txdata_index %d"
-			" tx_data ptr %p fp pointer %p",
+			" tx_data ptr %p fp pointer %p\n",
 	   txdata->cid, fp_index, txdata_index, txdata, fp); */
 
 	if (unlikely(bnx2x_tx_avail(bp, txdata) <
@@ -2910,14 +2914,14 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
 	/* requested to support too many traffic classes */
 	if (num_tc > bp->max_cos) {
 		DP(NETIF_MSG_TX_ERR, "support for too many traffic classes"
-				     " requested: %d. max supported is %d",
+				     " requested: %d. max supported is %d\n",
 				     num_tc, bp->max_cos);
 		return -EINVAL;
 	}
 
 	/* declare amount of supported traffic classes */
 	if (netdev_set_num_tc(dev, num_tc)) {
-		DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes",
+		DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes\n",
 				     num_tc);
 		return -EINVAL;
 	}
@@ -2925,7 +2929,7 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
 	/* configure priority to traffic class mapping */
 	for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) {
 		netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]);
-		DP(BNX2X_MSG_SP, "mapping priority %d to tc %d",
+		DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n",
 		   prio, bp->prio_to_cos[prio]);
 	}
 
@@ -2934,10 +2938,10 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
 	   This can be used for ets or pfc, and save the effort of setting
 	   up a multio class queue disc or negotiating DCBX with a switch
 	netdev_set_prio_tc_map(dev, 0, 0);
-	DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", 0, 0);
+	DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", 0, 0);
 	for (prio = 1; prio < 16; prio++) {
 		netdev_set_prio_tc_map(dev, prio, 1);
-		DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", prio, 1);
+		DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", prio, 1);
 	} */
 
 	/* configure traffic class to transmission queue mapping */
@@ -2945,7 +2949,7 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
 		count = BNX2X_NUM_ETH_QUEUES(bp);
 		offset = cos * MAX_TXQS_PER_COS;
 		netdev_set_tc_queue(dev, cos, count, offset);
-		DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d",
+		DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d\n",
 		   cos, offset, count);
 	}
 
@@ -3033,7 +3037,7 @@ static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index)
 			struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
 
 			DP(BNX2X_MSG_SP,
-			   "freeing tx memory of fp %d cos %d cid %d",
+			   "freeing tx memory of fp %d cos %d cid %d\n",
 			   fp_index, cos, txdata->cid);
 
 			BNX2X_FREE(txdata->tx_buf_ring);
@@ -3115,7 +3119,7 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
 			struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
 
 			DP(BNX2X_MSG_SP, "allocating tx memory of "
-					 "fp %d cos %d",
+					 "fp %d cos %d\n",
 			   index, cos);
 
 			BNX2X_ALLOC(txdata->tx_buf_ring,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h

@@ -1289,7 +1289,7 @@ static inline void bnx2x_init_txdata(struct bnx2x *bp,
 	txdata->txq_index = txq_index;
 	txdata->tx_cons_sb = tx_cons_sb;
 
-	DP(BNX2X_MSG_SP, "created tx data cid %d, txq %d",
+	DP(BNX2X_MSG_SP, "created tx data cid %d, txq %d\n",
 	   txdata->cid, txdata->txq_index);
 }
 
@@ -1333,7 +1333,7 @@ static inline void bnx2x_init_fcoe_fp(struct bnx2x *bp)
 	bnx2x_init_txdata(bp, &bnx2x_fcoe(bp, txdata[0]),
 			  fp->cid, FCOE_TXQ_IDX(bp), BNX2X_FCOE_L2_TX_INDEX);
 
-	DP(BNX2X_MSG_SP, "created fcoe tx data (fp index %d)", fp->index);
+	DP(BNX2X_MSG_SP, "created fcoe tx data (fp index %d)\n", fp->index);
 
 	/* qZone id equals to FW (per path) client id */
 	bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fp_qzone_id(fp);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c

@@ -350,7 +350,7 @@ static void bnx2x_dcbx_map_nw(struct bnx2x *bp)
 		if (cos_params[i].pri_bitmask & nw_prio) {
 			/* extend the bitmask with unmapped */
 			DP(NETIF_MSG_LINK,
-			   "cos %d extended with 0x%08x", i, unmapped);
+			   "cos %d extended with 0x%08x\n", i, unmapped);
 			cos_params[i].pri_bitmask |= unmapped;
 			break;
 		}

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -4388,7 +4388,7 @@ static inline void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp)
 static inline struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj(
 	struct bnx2x *bp, u32 cid)
 {
-	DP(BNX2X_MSG_SP, "retrieving fp from cid %d", cid);
+	DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid);
 #ifdef BCM_CNIC
 	if (cid == BNX2X_FCOE_ETH_CID)
 		return &bnx2x_fcoe(bp, q_obj);
@@ -7176,7 +7176,7 @@ static inline void bnx2x_pf_q_prep_init(struct bnx2x *bp,
 	/* set maximum number of COSs supported by this queue */
 	init_params->max_cos = fp->max_cos;
 
-	DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d",
+	DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d\n",
 	    fp->index, init_params->max_cos);
 
 	/* set the context pointers queue object */
@@ -7209,7 +7209,7 @@ int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 
 	DP(BNX2X_MSG_SP, "preparing to send tx-only ramrod for connection:"
 			 "cos %d, primary cid %d, cid %d, "
-			 "client id %d, sp-client id %d, flags %lx",
+			 "client id %d, sp-client id %d, flags %lx\n",
 	   tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX],
 	   q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id,
 	   tx_only_params->gen_params.spcl_id, tx_only_params->flags);
@@ -7241,7 +7241,7 @@ int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	int rc;
 	u8 tx_index;
 
-	DP(BNX2X_MSG_SP, "setting up queue %d", fp->index);
+	DP(BNX2X_MSG_SP, "setting up queue %d\n", fp->index);
 
 	/* reset IGU state skip FCoE L2 queue */
 	if (!IS_FCOE_FP(fp))
@@ -7265,7 +7265,7 @@ int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		return rc;
 	}
 
-	DP(BNX2X_MSG_SP, "init complete");
+	DP(BNX2X_MSG_SP, "init complete\n");
 
 
 	/* Now move the Queue to the SETUP state... */
@@ -7319,7 +7319,7 @@ static int bnx2x_stop_queue(struct bnx2x *bp, int index)
 	struct bnx2x_queue_state_params q_params = {0};
 	int rc, tx_index;
 
-	DP(BNX2X_MSG_SP, "stopping queue %d cid %d", index, fp->cid);
+	DP(BNX2X_MSG_SP, "stopping queue %d cid %d\n", index, fp->cid);
 
 	q_params.q_obj = &fp->q_obj;
 	/* We want to wait for completion in this context */
@@ -7334,7 +7334,7 @@ static int bnx2x_stop_queue(struct bnx2x *bp, int index)
 		/* ascertain this is a normal queue*/
 		txdata = &fp->txdata[tx_index];
 
-		DP(BNX2X_MSG_SP, "stopping tx-only queue %d",
+		DP(BNX2X_MSG_SP, "stopping tx-only queue %d\n",
 							txdata->txq_index);
 
 		/* send halt terminate on tx-only connection */
@@ -10704,7 +10704,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 		return rc;
 	}
 
-	DP(NETIF_MSG_DRV, "max_non_def_sbs %d", max_non_def_sbs);
+	DP(NETIF_MSG_DRV, "max_non_def_sbs %d\n", max_non_def_sbs);
 
 	rc = bnx2x_init_bp(bp);
 	if (rc)
@@ -10759,15 +10759,14 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 
 	bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
 
-	netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx,"
-	       " IRQ %d, ", board_info[ent->driver_data].name,
-	       (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
-	       pcie_width,
-	       ((!CHIP_IS_E2(bp) && pcie_speed == 2) ||
-		 (CHIP_IS_E2(bp) && pcie_speed == 1)) ?
-						"5GHz (Gen2)" : "2.5GHz",
-	       dev->base_addr, bp->pdev->irq);
-	pr_cont("node addr %pM\n", dev->dev_addr);
+	netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
+		    board_info[ent->driver_data].name,
+		    (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
+		    pcie_width,
+		    ((!CHIP_IS_E2(bp) && pcie_speed == 2) ||
+		     (CHIP_IS_E2(bp) && pcie_speed == 1)) ?
+		    "5GHz (Gen2)" : "2.5GHz",
+		    dev->base_addr, bp->pdev->irq, dev->dev_addr);
 
 	return 0;
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c

@@ -3045,8 +3045,8 @@ static int bnx2x_mcast_setup_e1h(struct bnx2x *bp,
 			break;
 
 		case BNX2X_MCAST_CMD_DEL:
-			DP(BNX2X_MSG_SP, "Invalidating multicast "
-					 "MACs configuration\n");
+			DP(BNX2X_MSG_SP,
+			   "Invalidating multicast MACs configuration\n");
 
 			/* clear the registry */
 			memset(o->registry.aprox_match.vec, 0,
@@ -4239,7 +4239,7 @@ static int bnx2x_queue_comp_cmd(struct bnx2x *bp,
 			 o->cids[BNX2X_PRIMARY_CID_INDEX], o->next_state);
 
 	if (o->next_tx_only)  /* print num tx-only if any exist */
-		DP(BNX2X_MSG_SP, "primary cid %d: num tx-only cons %d",
+		DP(BNX2X_MSG_SP, "primary cid %d: num tx-only cons %d\n",
 			   o->cids[BNX2X_PRIMARY_CID_INDEX], o->next_tx_only);
 
 	o->state = o->next_state;
@@ -4301,7 +4301,7 @@ static void bnx2x_q_fill_init_general_data(struct bnx2x *bp,
 		test_bit(BNX2X_Q_FLG_FCOE, flags) ?
 		LLFC_TRAFFIC_TYPE_FCOE : LLFC_TRAFFIC_TYPE_NW;
 
-	DP(BNX2X_MSG_SP, "flags: active %d, cos %d, stats en %d",
+	DP(BNX2X_MSG_SP, "flags: active %d, cos %d, stats en %d\n",
 	   gen_data->activate_flg, gen_data->cos, gen_data->statistics_en_flg);
 }
 
@@ -4454,7 +4454,7 @@ static void bnx2x_q_fill_setup_tx_only(struct bnx2x *bp,
 				  &data->tx,
 				  &cmd_params->params.tx_only.flags);
 
-	DP(BNX2X_MSG_SP, "cid %d, tx bd page lo %x hi %x",cmd_params->q_obj->cids[0],
+	DP(BNX2X_MSG_SP, "cid %d, tx bd page lo %x hi %x\n",cmd_params->q_obj->cids[0],
 	   data->tx.tx_bd_page_base.lo, data->tx.tx_bd_page_base.hi);
 }
 
@@ -4501,9 +4501,9 @@ static inline int bnx2x_q_init(struct bnx2x *bp,
 
 	/* Set CDU context validation values */
 	for (cos = 0; cos < o->max_cos; cos++) {
-		DP(BNX2X_MSG_SP, "setting context validation. cid %d, cos %d",
+		DP(BNX2X_MSG_SP, "setting context validation. cid %d, cos %d\n",
 				 o->cids[cos], cos);
-		DP(BNX2X_MSG_SP, "context pointer %p", init->cxts[cos]);
+		DP(BNX2X_MSG_SP, "context pointer %p\n", init->cxts[cos]);
 		bnx2x_set_ctx_validation(bp, init->cxts[cos], o->cids[cos]);
 	}
 
@@ -4592,7 +4592,7 @@ static inline int bnx2x_q_send_setup_tx_only(struct bnx2x *bp,
 		return -EINVAL;
 	}
 
-	DP(BNX2X_MSG_SP, "parameters received: cos: %d sp-id: %d",
+	DP(BNX2X_MSG_SP, "parameters received: cos: %d sp-id: %d\n",
 			 tx_only_params->gen_params.cos,
 			 tx_only_params->gen_params.spcl_id);
 
@@ -4603,7 +4603,7 @@ static inline int bnx2x_q_send_setup_tx_only(struct bnx2x *bp,
 	bnx2x_q_fill_setup_tx_only(bp, params, rdata);
 
 	DP(BNX2X_MSG_SP, "sending tx-only ramrod: cid %d, client-id %d,"
-			 "sp-client id %d, cos %d",
+			 "sp-client id %d, cos %d\n",
 			 o->cids[cid_index],
 			 rdata->general.client_id,
 			 rdata->general.sp_client_id, rdata->general.cos);
@@ -5160,8 +5160,9 @@ static inline int bnx2x_func_state_change_comp(struct bnx2x *bp,
 		return -EINVAL;
 	}
 
-	DP(BNX2X_MSG_SP, "Completing command %d for func %d, setting state to "
-			 "%d\n", cmd, BP_FUNC(bp), o->next_state);
+	DP(BNX2X_MSG_SP,
+	   "Completing command %d for func %d, setting state to %d\n",
+	   cmd, BP_FUNC(bp), o->next_state);
 
 	o->state = o->next_state;
 	o->next_state = BNX2X_F_STATE_MAX;