AMD_SFH: Add sensor_mask module parameter

Add a sensor_mask module parameter which can be used to override the
sensor-mask read from the activestatus bits of the AMD_P2C_MSG3
registers. Some BIOS-es do not program the activestatus bits, leading
to the AMD-SFH driver not registering any HID devices even though the
laptop in question does actually have sensors.

While at it also fix the wrong indentation of the MAGNO_EN define.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199715
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1651886
Fixes: 4f567b9f ("SFH: PCIe driver to add support of AMD sensor fusion hub")
Suggested-by: Richard Neumann <mail@richard-neumann.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sandeep Singh <sandeep.singh@amd.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drivers/hid/amd-sfh-hid/amd_sfh_pcie.c

@@ -22,9 +22,13 @@
 
 #define ACEL_EN		BIT(0)
 #define GYRO_EN		BIT(1)
-#define MAGNO_EN		BIT(2)
+#define MAGNO_EN	BIT(2)
 #define ALS_EN		BIT(19)
 
+static int sensor_mask_override = -1;
+module_param_named(sensor_mask, sensor_mask_override, int, 0444);
+MODULE_PARM_DESC(sensor_mask, "override the detected sensors mask");
+
 void amd_start_sensor(struct amd_mp2_dev *privdata, struct amd_mp2_sensor_info info)
 {
 	union sfh_cmd_param cmd_param;
@@ -78,8 +82,12 @@ int amd_mp2_get_sensor_num(struct amd_mp2_dev *privdata, u8 *sensor_id)
 	int activestatus, num_of_sensors = 0;
 	u32 activecontrolstatus;
 
-	activecontrolstatus = readl(privdata->mmio + AMD_P2C_MSG3);
-	activestatus = activecontrolstatus >> 4;
+	if (sensor_mask_override >= 0) {
+		activestatus = sensor_mask_override;
+	} else {
+		activecontrolstatus = readl(privdata->mmio + AMD_P2C_MSG3);
+		activestatus = activecontrolstatus >> 4;
+	}
 
 	if (ACEL_EN  & activestatus)
 		sensor_id[num_of_sensors++] = accel_idx;