Merge tag 'drm-xilinx-dpsub-20200718' of git://linuxtv.org/pinchartl/media into drm-next

Xilinx ZynqMP DisplayPort Subsystem driver
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200718001755.GA5962@pendragon.ideasonboard.com

Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/xlnx/xlnx,zynqmp-dpsub.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DisplayPort Subsystem
+
+description: |
+  The DisplayPort subsystem of Xilinx ZynqMP (Zynq UltraScale+ MPSoC)
+  implements the display and audio pipelines based on the DisplayPort v1.2
+  standard. The subsystem includes multiple functional blocks as below:
+
+               +------------------------------------------------------------+
+  +--------+   | +----------------+     +-----------+                       |
+  | DPDMA  | --->|                | --> |   Video   | Video +-------------+ |
+  | 4x vid |   | |                |     | Rendering | -+--> |             | |   +------+
+  | 2x aud |   | |  Audio/Video   | --> | Pipeline  |  |    | DisplayPort |---> | PHY0 |
+  +--------+   | | Buffer Manager |     +-----------+  |    |   Source    | |   +------+
+               | |    and STC     |     +-----------+  |    | Controller  | |   +------+
+  Live Video --->|                | --> |   Audio   | Audio |             |---> | PHY1 |
+               | |                |     |   Mixer   | --+-> |             | |   +------+
+  Live Audio --->|                | --> |           |  ||   +-------------+ |
+               | +----------------+     +-----------+  ||                   |
+               +---------------------------------------||-------------------+
+                                                       vv
+                                                 Blended Video and
+                                                 Mixed Audio to PL
+
+  The Buffer Manager interacts with external interface such as DMA engines or
+  live audio/video streams from the programmable logic. The Video Rendering
+  Pipeline blends the video and graphics layers and performs colorspace
+  conversion. The Audio Mixer mixes the incoming audio streams. The DisplayPort
+  Source Controller handles the DisplayPort protocol and connects to external
+  PHYs.
+
+  The subsystem supports 2 video and 2 audio streams, and various pixel formats
+  and depths up to 4K@30 resolution.
+
+  Please refer to "Zynq UltraScale+ Device Technical Reference Manual"
+  (https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf)
+  for more details.
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-dpsub-1.7
+
+  reg:
+    maxItems: 4
+  reg-names:
+    items:
+      - const: dp
+      - const: blend
+      - const: av_buf
+      - const: aud
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      The APB clock and at least one video clock are mandatory, the audio clock
+      is optional.
+    minItems: 2
+    maxItems: 4
+    items:
+      - description: dp_apb_clk is the APB clock
+      - description: dp_aud_clk is the Audio clock
+      - description:
+          dp_vtc_pixel_clk_in is the non-live video clock (from Processing
+          System)
+      - description:
+          dp_live_video_in_clk is the live video clock (from Programmable
+          Logic)
+  clock-names:
+    oneOf:
+      - minItems: 2
+        maxItems: 3
+        items:
+          - const: dp_apb_clk
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+      - minItems: 3
+        maxItems: 4
+        items:
+          - const: dp_apb_clk
+          - const: dp_aud_clk
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    maxItems: 4
+    items:
+      - description: Video layer, plane 0 (RGB or luma)
+      - description: Video layer, plane 1 (U/V or U)
+      - description: Video layer, plane 2 (V)
+      - description: Graphics layer
+  dma-names:
+    items:
+      - const: vid0
+      - const: vid1
+      - const: vid2
+      - const: gfx0
+
+  phys:
+    description: PHYs for the DP data lanes
+    minItems: 1
+    maxItems: 2
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: dp-phy0
+      - const: dp-phy1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - dmas
+  - dma-names
+  - phys
+  - phy-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+    display@fd4a0000 {
+        compatible = "xlnx,zynqmp-dpsub-1.7";
+        reg = <0x0 0xfd4a0000 0x0 0x1000>,
+              <0x0 0xfd4aa000 0x0 0x1000>,
+              <0x0 0xfd4ab000 0x0 0x1000>,
+              <0x0 0xfd4ac000 0x0 0x1000>;
+        reg-names = "dp", "blend", "av_buf", "aud";
+        interrupts = <0 119 4>;
+        interrupt-parent = <&gic>;
+
+        clock-names = "dp_apb_clk", "dp_aud_clk", "dp_live_video_in_clk";
+        clocks = <&dp_aclk>, <&clkc 17>, <&si570_1>;
+
+        power-domains = <&pd_dp>;
+        resets = <&reset ZYNQMP_RESET_DP>;
+
+        dma-names = "vid0", "vid1", "vid2", "gfx0";
+        dmas = <&xlnx_dpdma 0>,
+               <&xlnx_dpdma 1>,
+               <&xlnx_dpdma 2>,
+               <&xlnx_dpdma 3>;
+
+        phys = <&psgtr 1 PHY_TYPE_DP 0 3 27000000>,
+               <&psgtr 0 PHY_TYPE_DP 1 3 27000000>;
+
+        phy-names = "dp-phy0", "dp-phy1";
+    };
+
+...

Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dpdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DisplayPort DMA Controller Device Tree Bindings
+
+description: |
+  These bindings describe the DMA engine included in the Xilinx ZynqMP
+  DisplayPort Subsystem. The DMA engine supports up to 6 DMA channels (3
+  channels for a video stream, 1 channel for a graphics stream, and 2 channels
+  for an audio stream).
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+allOf:
+  - $ref: "../dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 1
+    description: |
+      The cell is the DMA channel ID (see dt-bindings/dma/xlnx-zynqmp-dpdma.h
+      for a list of channel IDs).
+
+  compatible:
+    const: xlnx,zynqmp-dpdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: The AXI clock
+    maxItems: 1
+
+  clock-names:
+    const: axi_clk
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dma: dma-controller@fd4c0000 {
+      compatible = "xlnx,zynqmp-dpdma";
+      reg = <0x0 0xfd4c0000 0x0 0x1000>;
+      interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-parent = <&gic>;
+      clocks = <&dpdma_clk>;
+      clock-names = "axi_clk";
+      #dma-cells = <1>;
+    };
+
+...

Documentation/driver-api/dmaengine/client.rst

@@ -86,7 +86,9 @@ The details of these operations are:
   - interleaved_dma: This is common to Slave as well as M2M clients. For slave
     address of devices' fifo could be already known to the driver.
     Various types of operations could be expressed by setting
-    appropriate values to the 'dma_interleaved_template' members.
+    appropriate values to the 'dma_interleaved_template' members. Cyclic
+    interleaved DMA transfers are also possible if supported by the channel by
+    setting the DMA_PREP_REPEAT transfer flag.
 
   A non-NULL return of this transfer API represents a "descriptor" for
   the given transaction.

Documentation/driver-api/dmaengine/provider.rst

@@ -239,6 +239,27 @@ Currently, the types available are:
     want to transfer a portion of uncompressed data directly to the
     display to print it
 
+- DMA_REPEAT
+
+  - The device supports repeated transfers. A repeated transfer, indicated by
+    the DMA_PREP_REPEAT transfer flag, is similar to a cyclic transfer in that
+    it gets automatically repeated when it ends, but can additionally be
+    replaced by the client.
+
+  - This feature is limited to interleaved transfers, this flag should thus not
+    be set if the DMA_INTERLEAVE flag isn't set. This limitation is based on
+    the current needs of DMA clients, support for additional transfer types
+    should be added in the future if and when the need arises.
+
+- DMA_LOAD_EOT
+
+  - The device supports replacing repeated transfers at end of transfer (EOT)
+    by queuing a new transfer with the DMA_PREP_LOAD_EOT flag set.
+
+  - Support for replacing a currently running transfer at another point (such
+    as end of burst instead of end of transfer) will be added in the future
+    based on DMA clients needs, if and when the need arises.
+
 These various types will also affect how the source and destination
 addresses change over time.
 
@@ -531,6 +552,34 @@ DMA_CTRL_REUSE
     writes for which the descriptor should be in different format from
     normal data descriptors.
 
+- DMA_PREP_REPEAT
+
+  - If set, the transfer will be automatically repeated when it ends until a
+    new transfer is queued on the same channel with the DMA_PREP_LOAD_EOT flag.
+    If the next transfer to be queued on the channel does not have the
+    DMA_PREP_LOAD_EOT flag set, the current transfer will be repeated until the
+    client terminates all transfers.
+
+  - This flag is only supported if the channel reports the DMA_REPEAT
+    capability.
+
+- DMA_PREP_LOAD_EOT
+
+  - If set, the transfer will replace the transfer currently being executed at
+    the end of the transfer.
+
+  - This is the default behaviour for non-repeated transfers, specifying
+    DMA_PREP_LOAD_EOT for non-repeated transfers will thus make no difference.
+
+  - When using repeated transfers, DMA clients will usually need to set the
+    DMA_PREP_LOAD_EOT flag on all transfers, otherwise the channel will keep
+    repeating the last repeated transfer and ignore the new transfers being
+    queued. Failure to set DMA_PREP_LOAD_EOT will appear as if the channel was
+    stuck on the previous transfer.
+
+  - This flag is only supported if the channel reports the DMA_LOAD_EOT
+    capability.
+
 General Design Notes
 ====================
 

MAINTAINERS

@@ -5839,6 +5839,15 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/gpu/xen-front.rst
 F:	drivers/gpu/drm/xen/
 
+DRM DRIVERS FOR XILINX
+M:	Hyun Kwon <hyun.kwon@xilinx.com>
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/xlnx/
+F:	drivers/gpu/drm/xlnx/
+
 DRM DRIVERS FOR ZTE ZX
 M:	Shawn Guo <shawnguo@kernel.org>
 L:	dri-devel@lists.freedesktop.org
@@ -18853,6 +18862,15 @@ F:	Documentation/devicetree/bindings/media/xilinx/
 F:	drivers/media/platform/xilinx/
 F:	include/uapi/linux/xilinx-v4l2-controls.h
 
+XILINX ZYNQMP DPDMA DRIVER
+M:	Hyun Kwon <hyun.kwon@xilinx.com>
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L:	dmaengine@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
+F:	drivers/dma/xilinx/xilinx_dpdma.c
+F:	include/dt-bindings/dma/xlnx-zynqmp-dpdma.h
+
 XILLYBUS DRIVER
 M:	Eli Billauer <eli.billauer@gmail.com>
 L:	linux-kernel@vger.kernel.org

drivers/dma/Kconfig

@@ -707,6 +707,16 @@ config XILINX_ZYNQMP_DMA
 	help
 	  Enable support for Xilinx ZynqMP DMA controller.
 
+config XILINX_ZYNQMP_DPDMA
+	tristate "Xilinx DPDMA Engine"
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Enable support for Xilinx ZynqMP DisplayPort DMA. Choose this option
+	  if you have a Xilinx ZynqMP SoC with a DisplayPort subsystem. The
+	  driver provides the dmaengine required by the DisplayPort subsystem
+	  display driver.
+
 config ZX_DMA
 	tristate "ZTE ZX DMA support"
 	depends on ARCH_ZX || COMPILE_TEST

drivers/dma/xilinx/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_XILINX_DMA) += xilinx_dma.o
 obj-$(CONFIG_XILINX_ZYNQMP_DMA) += zynqmp_dma.o
+obj-$(CONFIG_XILINX_ZYNQMP_DPDMA) += xilinx_dpdma.o

drivers/gpu/drm/Kconfig

@@ -386,6 +386,8 @@ source "drivers/gpu/drm/mcde/Kconfig"
 
 source "drivers/gpu/drm/tidss/Kconfig"
 
+source "drivers/gpu/drm/xlnx/Kconfig"
+
 # Keep legacy drivers last
 
 menuconfig DRM_LEGACY

drivers/gpu/drm/Makefile

@@ -123,3 +123,4 @@ obj-$(CONFIG_DRM_PANFROST) += panfrost/
 obj-$(CONFIG_DRM_ASPEED_GFX) += aspeed/
 obj-$(CONFIG_DRM_MCDE) += mcde/
 obj-$(CONFIG_DRM_TIDSS) += tidss/
+obj-y			+= xlnx/

drivers/gpu/drm/xlnx/Kconfig

+config DRM_ZYNQMP_DPSUB
+	tristate "ZynqMP DisplayPort Controller Driver"
+	depends on ARCH_ZYNQMP || COMPILE_TEST
+	depends on COMMON_CLK && DRM && OF
+	select DMA_ENGINE
+	select DRM_GEM_CMA_HELPER
+	select DRM_KMS_CMA_HELPER
+	select DRM_KMS_HELPER
+	select GENERIC_PHY
+	help
+	  This is a DRM/KMS driver for ZynqMP DisplayPort controller. Choose
+	  this option if you have a Xilinx ZynqMP SoC with DisplayPort
+	  subsystem.

drivers/gpu/drm/xlnx/Makefile

+zynqmp-dpsub-y := zynqmp_disp.o zynqmp_dpsub.o zynqmp_dp.o
+obj-$(CONFIG_DRM_ZYNQMP_DPSUB) += zynqmp-dpsub.o

drivers/gpu/drm/xlnx/zynqmp_disp.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ZynqMP Display Driver
+ *
+ * Copyright (C) 2017 - 2020 Xilinx, Inc.
+ *
+ * Authors:
+ * - Hyun Woo Kwon <hyun.kwon@xilinx.com>
+ * - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+
+#ifndef _ZYNQMP_DISP_H_
+#define _ZYNQMP_DISP_H_
+
+#include <linux/types.h>
+
+/*
+ * 3840x2160 is advertised as the maximum resolution, but almost any
+ * resolutions under a 300Mhz pixel rate would work. Pick 4096x4096.
+ */
+#define ZYNQMP_DISP_MAX_WIDTH				4096
+#define ZYNQMP_DISP_MAX_HEIGHT				4096
+
+/* The DPDMA is limited to 44 bit addressing. */
+#define ZYNQMP_DISP_MAX_DMA_BIT				44
+
+struct device;
+struct drm_device;
+struct platform_device;
+struct zynqmp_disp;
+struct zynqmp_dpsub;
+
+void zynqmp_disp_handle_vblank(struct zynqmp_disp *disp);
+bool zynqmp_disp_audio_enabled(struct zynqmp_disp *disp);
+unsigned int zynqmp_disp_get_audio_clk_rate(struct zynqmp_disp *disp);
+uint32_t zynqmp_disp_get_crtc_mask(struct zynqmp_disp *disp);
+
+int zynqmp_disp_drm_init(struct zynqmp_dpsub *dpsub);
+int zynqmp_disp_probe(struct zynqmp_dpsub *dpsub, struct drm_device *drm);
+void zynqmp_disp_remove(struct zynqmp_dpsub *dpsub);
+
+#endif /* _ZYNQMP_DISP_H_ */

drivers/gpu/drm/xlnx/zynqmp_disp_regs.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ZynqMP Display Controller Driver - Register Definitions
+ *
+ * Copyright (C) 2017 - 2020 Xilinx, Inc.
+ *
+ * Authors:
+ * - Hyun Woo Kwon <hyun.kwon@xilinx.com>
+ * - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+
+#ifndef _ZYNQMP_DISP_REGS_H_
+#define _ZYNQMP_DISP_REGS_H_
+
+#include <linux/bits.h>
+
+/* Blender registers */
+#define ZYNQMP_DISP_V_BLEND_BG_CLR_0			0x0
+#define ZYNQMP_DISP_V_BLEND_BG_CLR_1			0x4
+#define ZYNQMP_DISP_V_BLEND_BG_CLR_2			0x8
+#define ZYNQMP_DISP_V_BLEND_BG_MAX			0xfff
+#define ZYNQMP_DISP_V_BLEND_SET_GLOBAL_ALPHA		0xc
+#define ZYNQMP_DISP_V_BLEND_SET_GLOBAL_ALPHA_VALUE(n)	((n) << 1)
+#define ZYNQMP_DISP_V_BLEND_SET_GLOBAL_ALPHA_EN		BIT(0)
+#define ZYNQMP_DISP_V_BLEND_OUTPUT_VID_FMT		0x14
+#define ZYNQMP_DISP_V_BLEND_OUTPUT_VID_FMT_RGB		0x0
+#define ZYNQMP_DISP_V_BLEND_OUTPUT_VID_FMT_YCBCR444	0x1
+#define ZYNQMP_DISP_V_BLEND_OUTPUT_VID_FMT_YCBCR422	0x2
+#define ZYNQMP_DISP_V_BLEND_OUTPUT_VID_FMT_YONLY	0x3
+#define ZYNQMP_DISP_V_BLEND_OUTPUT_VID_FMT_XVYCC	0x4
+#define ZYNQMP_DISP_V_BLEND_OUTPUT_VID_FMT_EN_DOWNSAMPLE	BIT(4)
+#define ZYNQMP_DISP_V_BLEND_LAYER_CONTROL(n)		(0x18 + ((n) * 4))
+#define ZYNQMP_DISP_V_BLEND_LAYER_CONTROL_EN_US		BIT(0)
+#define ZYNQMP_DISP_V_BLEND_LAYER_CONTROL_RGB		BIT(1)
+#define ZYNQMP_DISP_V_BLEND_LAYER_CONTROL_BYPASS	BIT(8)
+#define ZYNQMP_DISP_V_BLEND_NUM_COEFF			9
+#define ZYNQMP_DISP_V_BLEND_NUM_OFFSET			3
+#define ZYNQMP_DISP_V_BLEND_RGB2YCBCR_COEFF(n)		(0x20 + ((n) * 4))
+#define ZYNQMP_DISP_V_BLEND_IN1CSC_COEFF(n)		(0x44 + ((n) * 4))
+#define ZYNQMP_DISP_V_BLEND_IN1CSC_OFFSET(n)		(0x68 + ((n) * 4))
+#define ZYNQMP_DISP_V_BLEND_OUTCSC_OFFSET(n)		(0x74 + ((n) * 4))
+#define ZYNQMP_DISP_V_BLEND_IN2CSC_COEFF(n)		(0x80 + ((n) * 4))
+#define ZYNQMP_DISP_V_BLEND_IN2CSC_OFFSET(n)		(0xa4 + ((n) * 4))
+#define ZYNQMP_DISP_V_BLEND_CHROMA_KEY_ENABLE		0x1d0
+#define ZYNQMP_DISP_V_BLEND_CHROMA_KEY_COMP1		0x1d4
+#define ZYNQMP_DISP_V_BLEND_CHROMA_KEY_COMP2		0x1d8
+#define ZYNQMP_DISP_V_BLEND_CHROMA_KEY_COMP3		0x1dc
+
+/* AV buffer manager registers */
+#define ZYNQMP_DISP_AV_BUF_FMT				0x0
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_SHIFT		0
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_MASK		(0x1f << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_UYVY		(0 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_VYUY		(1 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YVYU		(2 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YUYV		(3 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV16		(4 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV24		(5 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV16CI		(6 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_MONO		(7 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV16CI2		(8 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YUV444		(9 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_RGB888		(10 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_RGBA8880		(11 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_RGB888_10		(12 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YUV444_10		(13 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV16CI2_10	(14 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV16CI_10		(15 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV16_10		(16 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV24_10		(17 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YONLY_10		(18 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV16_420		(19 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV16CI_420	(20 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV16CI2_420	(21 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV16_420_10	(22 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV16CI_420_10	(23 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_VID_YV16CI2_420_10	(24 << 0)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_SHIFT		8
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_MASK		(0xf << 8)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_RGBA8888		(0 << 8)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_ABGR8888		(1 << 8)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_RGB888		(2 << 8)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_BGR888		(3 << 8)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_RGBA5551		(4 << 8)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_RGBA4444		(5 << 8)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_RGB565		(6 << 8)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_8BPP		(7 << 8)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_4BPP		(8 << 8)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_2BPP		(9 << 8)
+#define ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_1BPP		(10 << 8)
+#define ZYNQMP_DISP_AV_BUF_NON_LIVE_LATENCY		0x8
+#define ZYNQMP_DISP_AV_BUF_CHBUF(n)			(0x10 + ((n) * 4))
+#define ZYNQMP_DISP_AV_BUF_CHBUF_EN			BIT(0)
+#define ZYNQMP_DISP_AV_BUF_CHBUF_FLUSH			BIT(1)
+#define ZYNQMP_DISP_AV_BUF_CHBUF_BURST_LEN_SHIFT	2
+#define ZYNQMP_DISP_AV_BUF_CHBUF_BURST_LEN_MASK		(0xf << 2)
+#define ZYNQMP_DISP_AV_BUF_CHBUF_BURST_LEN_MAX		0xf
+#define ZYNQMP_DISP_AV_BUF_CHBUF_BURST_LEN_AUD_MAX	0x3
+#define ZYNQMP_DISP_AV_BUF_STATUS			0x28
+#define ZYNQMP_DISP_AV_BUF_STC_CTRL			0x2c
+#define ZYNQMP_DISP_AV_BUF_STC_CTRL_EN			BIT(0)
+#define ZYNQMP_DISP_AV_BUF_STC_CTRL_EVENT_SHIFT		1
+#define ZYNQMP_DISP_AV_BUF_STC_CTRL_EVENT_EX_VSYNC	0
+#define ZYNQMP_DISP_AV_BUF_STC_CTRL_EVENT_EX_VID	1
+#define ZYNQMP_DISP_AV_BUF_STC_CTRL_EVENT_EX_AUD	2
+#define ZYNQMP_DISP_AV_BUF_STC_CTRL_EVENT_INT_VSYNC	3
+#define ZYNQMP_DISP_AV_BUF_STC_INIT_VALUE0		0x30
+#define ZYNQMP_DISP_AV_BUF_STC_INIT_VALUE1		0x34
+#define ZYNQMP_DISP_AV_BUF_STC_ADJ			0x38
+#define ZYNQMP_DISP_AV_BUF_STC_VID_VSYNC_TS0		0x3c
+#define ZYNQMP_DISP_AV_BUF_STC_VID_VSYNC_TS1		0x40
+#define ZYNQMP_DISP_AV_BUF_STC_EXT_VSYNC_TS0		0x44
+#define ZYNQMP_DISP_AV_BUF_STC_EXT_VSYNC_TS1		0x48
+#define ZYNQMP_DISP_AV_BUF_STC_CUSTOM_EVENT_TS0		0x4c
+#define ZYNQMP_DISP_AV_BUF_STC_CUSTOM_EVENT_TS1		0x50
+#define ZYNQMP_DISP_AV_BUF_STC_CUSTOM_EVENT2_TS0	0x54
+#define ZYNQMP_DISP_AV_BUF_STC_CUSTOM_EVENT2_TS1	0x58
+#define ZYNQMP_DISP_AV_BUF_STC_SNAPSHOT0		0x60
+#define ZYNQMP_DISP_AV_BUF_STC_SNAPSHOT1		0x64
+#define ZYNQMP_DISP_AV_BUF_OUTPUT			0x70
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_VID1_SHIFT		0
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_VID1_MASK		(0x3 << 0)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_VID1_LIVE		(0 << 0)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_VID1_MEM		(1 << 0)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_VID1_PATTERN		(2 << 0)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_VID1_NONE		(3 << 0)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_VID2_SHIFT		2
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_VID2_MASK		(0x3 << 2)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_VID2_DISABLE		(0 << 2)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_VID2_MEM		(1 << 2)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_VID2_LIVE		(2 << 2)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_VID2_NONE		(3 << 2)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_AUD1_SHIFT		4
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_AUD1_MASK		(0x3 << 4)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_AUD1_PL		(0 << 4)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_AUD1_MEM		(1 << 4)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_AUD1_PATTERN		(2 << 4)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_AUD1_DISABLE		(3 << 4)
+#define ZYNQMP_DISP_AV_BUF_OUTPUT_AUD2_EN		BIT(6)
+#define ZYNQMP_DISP_AV_BUF_HCOUNT_VCOUNT_INT0		0x74
+#define ZYNQMP_DISP_AV_BUF_HCOUNT_VCOUNT_INT1		0x78
+#define ZYNQMP_DISP_AV_BUF_PATTERN_GEN_SELECT		0x100
+#define ZYNQMP_DISP_AV_BUF_CLK_SRC			0x120
+#define ZYNQMP_DISP_AV_BUF_CLK_SRC_VID_FROM_PS		BIT(0)
+#define ZYNQMP_DISP_AV_BUF_CLK_SRC_AUD_FROM_PS		BIT(1)
+#define ZYNQMP_DISP_AV_BUF_CLK_SRC_VID_INTERNAL_TIMING	BIT(2)
+#define ZYNQMP_DISP_AV_BUF_SRST_REG			0x124
+#define ZYNQMP_DISP_AV_BUF_SRST_REG_VID_RST		BIT(1)
+#define ZYNQMP_DISP_AV_BUF_AUDIO_CH_CONFIG		0x12c
+#define ZYNQMP_DISP_AV_BUF_GFX_COMP_SF(n)		(0x200 + ((n) * 4))
+#define ZYNQMP_DISP_AV_BUF_VID_COMP_SF(n)		(0x20c + ((n) * 4))
+#define ZYNQMP_DISP_AV_BUF_LIVD_VID_COMP_SF(n)		(0x218 + ((n) * 4))
+#define ZYNQMP_DISP_AV_BUF_LIVE_VID_CONFIG		0x224
+#define ZYNQMP_DISP_AV_BUF_LIVD_GFX_COMP_SF(n)		(0x228 + ((n) * 4))
+#define ZYNQMP_DISP_AV_BUF_LIVE_GFX_CONFIG		0x234
+#define ZYNQMP_DISP_AV_BUF_4BIT_SF			0x11111
+#define ZYNQMP_DISP_AV_BUF_5BIT_SF			0x10842
+#define ZYNQMP_DISP_AV_BUF_6BIT_SF			0x10410
+#define ZYNQMP_DISP_AV_BUF_8BIT_SF			0x10101
+#define ZYNQMP_DISP_AV_BUF_10BIT_SF			0x10040
+#define ZYNQMP_DISP_AV_BUF_NULL_SF			0
+#define ZYNQMP_DISP_AV_BUF_NUM_SF			3
+#define ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_BPC_6		0x0
+#define ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_BPC_8		0x1
+#define ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_BPC_10		0x2
+#define ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_BPC_12		0x3
+#define ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_BPC_MASK		GENMASK(2, 0)
+#define ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_FMT_RGB		0x0
+#define ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_FMT_YUV444	0x1
+#define ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_FMT_YUV422	0x2
+#define ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_FMT_YONLY	0x3
+#define ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_FMT_MASK		GENMASK(5, 4)
+#define ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_CB_FIRST		BIT(8)
+#define ZYNQMP_DISP_AV_BUF_PALETTE_MEMORY		0x400
+
+/* Audio registers */
+#define ZYNQMP_DISP_AUD_MIXER_VOLUME			0x0
+#define ZYNQMP_DISP_AUD_MIXER_VOLUME_NO_SCALE		0x20002000
+#define ZYNQMP_DISP_AUD_MIXER_META_DATA			0x4
+#define ZYNQMP_DISP_AUD_CH_STATUS0			0x8
+#define ZYNQMP_DISP_AUD_CH_STATUS1			0xc
+#define ZYNQMP_DISP_AUD_CH_STATUS2			0x10
+#define ZYNQMP_DISP_AUD_CH_STATUS3			0x14
+#define ZYNQMP_DISP_AUD_CH_STATUS4			0x18
+#define ZYNQMP_DISP_AUD_CH_STATUS5			0x1c
+#define ZYNQMP_DISP_AUD_CH_A_DATA0			0x20
+#define ZYNQMP_DISP_AUD_CH_A_DATA1			0x24
+#define ZYNQMP_DISP_AUD_CH_A_DATA2			0x28
+#define ZYNQMP_DISP_AUD_CH_A_DATA3			0x2c
+#define ZYNQMP_DISP_AUD_CH_A_DATA4			0x30
+#define ZYNQMP_DISP_AUD_CH_A_DATA5			0x34
+#define ZYNQMP_DISP_AUD_CH_B_DATA0			0x38
+#define ZYNQMP_DISP_AUD_CH_B_DATA1			0x3c
+#define ZYNQMP_DISP_AUD_CH_B_DATA2			0x40
+#define ZYNQMP_DISP_AUD_CH_B_DATA3			0x44
+#define ZYNQMP_DISP_AUD_CH_B_DATA4			0x48
+#define ZYNQMP_DISP_AUD_CH_B_DATA5			0x4c
+#define ZYNQMP_DISP_AUD_SOFT_RESET			0xc00
+#define ZYNQMP_DISP_AUD_SOFT_RESET_AUD_SRST		BIT(0)
+
+#endif /* _ZYNQMP_DISP_REGS_H_ */

drivers/gpu/drm/xlnx/zynqmp_dp.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ZynqMP DisplayPort Driver
+ *
+ * Copyright (C) 2017 - 2020 Xilinx, Inc.
+ *
+ * Authors:
+ * - Hyun Woo Kwon <hyun.kwon@xilinx.com>
+ * - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+
+#ifndef _ZYNQMP_DP_H_
+#define _ZYNQMP_DP_H_
+
+struct drm_device;
+struct platform_device;
+struct zynqmp_dp;
+struct zynqmp_dpsub;
+
+void zynqmp_dp_enable_vblank(struct zynqmp_dp *dp);
+void zynqmp_dp_disable_vblank(struct zynqmp_dp *dp);
+
+int zynqmp_dp_drm_init(struct zynqmp_dpsub *dpsub);
+int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub, struct drm_device *drm);
+void zynqmp_dp_remove(struct zynqmp_dpsub *dpsub);
+
+#endif /* _ZYNQMP_DP_H_ */

drivers/gpu/drm/xlnx/zynqmp_dpsub.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ZynqMP DisplayPort Subsystem Driver
+ *
+ * Copyright (C) 2017 - 2020 Xilinx, Inc.
+ *
+ * Authors:
+ * - Hyun Woo Kwon <hyun.kwon@xilinx.com>
+ * - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_device.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_mode_config.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include "zynqmp_disp.h"
+#include "zynqmp_dp.h"
+#include "zynqmp_dpsub.h"
+
+/* -----------------------------------------------------------------------------
+ * Dumb Buffer & Framebuffer Allocation
+ */
+
+static int zynqmp_dpsub_dumb_create(struct drm_file *file_priv,
+				    struct drm_device *drm,
+				    struct drm_mode_create_dumb *args)
+{
+	struct zynqmp_dpsub *dpsub = to_zynqmp_dpsub(drm);
+	unsigned int pitch = DIV_ROUND_UP(args->width * args->bpp, 8);
+
+	/* Enforce the alignment constraints of the DMA engine. */
+	args->pitch = ALIGN(pitch, dpsub->dma_align);
+
+	return drm_gem_cma_dumb_create_internal(file_priv, drm, args);
+}
+
+static struct drm_framebuffer *
+zynqmp_dpsub_fb_create(struct drm_device *drm, struct drm_file *file_priv,
+		       const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+	struct zynqmp_dpsub *dpsub = to_zynqmp_dpsub(drm);
+	struct drm_mode_fb_cmd2 cmd = *mode_cmd;
+	unsigned int i;
+
+	/* Enforce the alignment constraints of the DMA engine. */
+	for (i = 0; i < ARRAY_SIZE(cmd.pitches); ++i)
+		cmd.pitches[i] = ALIGN(cmd.pitches[i], dpsub->dma_align);
+
+	return drm_gem_fb_create(drm, file_priv, &cmd);
+}
+
+static const struct drm_mode_config_funcs zynqmp_dpsub_mode_config_funcs = {
+	.fb_create		= zynqmp_dpsub_fb_create,
+	.atomic_check		= drm_atomic_helper_check,
+	.atomic_commit		= drm_atomic_helper_commit,
+};
+
+/* -----------------------------------------------------------------------------
+ * DRM/KMS Driver
+ */
+
+DEFINE_DRM_GEM_CMA_FOPS(zynqmp_dpsub_drm_fops);
+
+static struct drm_driver zynqmp_dpsub_drm_driver = {
+	.driver_features		= DRIVER_MODESET | DRIVER_GEM |
+					  DRIVER_ATOMIC,
+
+	.prime_handle_to_fd		= drm_gem_prime_handle_to_fd,
+	.prime_fd_to_handle		= drm_gem_prime_fd_to_handle,
+	.gem_prime_export		= drm_gem_prime_export,
+	.gem_prime_import		= drm_gem_prime_import,
+	.gem_prime_get_sg_table		= drm_gem_cma_prime_get_sg_table,
+	.gem_prime_import_sg_table	= drm_gem_cma_prime_import_sg_table,
+	.gem_prime_vmap			= drm_gem_cma_prime_vmap,
+	.gem_prime_vunmap		= drm_gem_cma_prime_vunmap,
+	.gem_prime_mmap			= drm_gem_cma_prime_mmap,
+	.gem_free_object_unlocked	= drm_gem_cma_free_object,
+	.gem_vm_ops			= &drm_gem_cma_vm_ops,
+	.dumb_create			= zynqmp_dpsub_dumb_create,
+	.dumb_destroy			= drm_gem_dumb_destroy,
+
+	.fops				= &zynqmp_dpsub_drm_fops,
+
+	.name				= "zynqmp-dpsub",
+	.desc				= "Xilinx DisplayPort Subsystem Driver",
+	.date				= "20130509",
+	.major				= 1,
+	.minor				= 0,
+};
+
+static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
+{
+	struct drm_device *drm = &dpsub->drm;
+	int ret;
+
+	/* Initialize mode config, vblank and the KMS poll helper. */
+	ret = drmm_mode_config_init(drm);
+	if (ret < 0)
+		goto err_dev_put;
+
+	drm->mode_config.funcs = &zynqmp_dpsub_mode_config_funcs;
+	drm->mode_config.min_width = 0;
+	drm->mode_config.min_height = 0;
+	drm->mode_config.max_width = ZYNQMP_DISP_MAX_WIDTH;
+	drm->mode_config.max_height = ZYNQMP_DISP_MAX_HEIGHT;
+
+	ret = drm_vblank_init(drm, 1);
+	if (ret)
+		goto err_dev_put;
+
+	drm->irq_enabled = 1;
+
+	drm_kms_helper_poll_init(drm);
+
+	/*
+	 * Initialize the DISP and DP components. This will creates planes,
+	 * CRTC, encoder and connector. The DISP should be initialized first as
+	 * the DP encoder needs the CRTC.
+	 */
+	ret = zynqmp_disp_drm_init(dpsub);
+	if (ret)
+		goto err_poll_fini;
+
+	ret = zynqmp_dp_drm_init(dpsub);
+	if (ret)
+		goto err_poll_fini;
+
+	/* Reset all components and register the DRM device. */
+	drm_mode_config_reset(drm);
+
+	ret = drm_dev_register(drm, 0);
+	if (ret < 0)
+		goto err_poll_fini;
+
+	/* Initialize fbdev generic emulation. */
+	drm_fbdev_generic_setup(drm, 24);
+
+	return 0;
+
+err_poll_fini:
+	drm_kms_helper_poll_fini(drm);
+err_dev_put:
+	drm_dev_put(drm);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Power Management
+ */
+
+static int __maybe_unused zynqmp_dpsub_suspend(struct device *dev)
+{
+	struct zynqmp_dpsub *dpsub = dev_get_drvdata(dev);
+
+	return drm_mode_config_helper_suspend(&dpsub->drm);
+}
+
+static int __maybe_unused zynqmp_dpsub_resume(struct device *dev)
+{
+	struct zynqmp_dpsub *dpsub = dev_get_drvdata(dev);
+
+	return drm_mode_config_helper_resume(&dpsub->drm);
+}
+
+static const struct dev_pm_ops zynqmp_dpsub_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(zynqmp_dpsub_suspend, zynqmp_dpsub_resume)
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe & Remove
+ */
+
+static int zynqmp_dpsub_init_clocks(struct zynqmp_dpsub *dpsub)
+{
+	int ret;
+
+	dpsub->apb_clk = devm_clk_get(dpsub->dev, "dp_apb_clk");
+	if (IS_ERR(dpsub->apb_clk))
+		return PTR_ERR(dpsub->apb_clk);
+
+	ret = clk_prepare_enable(dpsub->apb_clk);
+	if (ret) {
+		dev_err(dpsub->dev, "failed to enable the APB clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int zynqmp_dpsub_probe(struct platform_device *pdev)
+{
+	struct zynqmp_dpsub *dpsub;
+	int ret;
+
+	/* Allocate private data. */
+	dpsub = kzalloc(sizeof(*dpsub), GFP_KERNEL);
+	if (!dpsub)
+		return -ENOMEM;
+
+	dpsub->dev = &pdev->dev;
+	platform_set_drvdata(pdev, dpsub);
+
+	dma_set_mask(dpsub->dev, DMA_BIT_MASK(ZYNQMP_DISP_MAX_DMA_BIT));
+
+	/*
+	 * Initialize the DRM device early, as the DRM core mandates usage of
+	 * the managed memory helpers tied to the DRM device.
+	 */
+	ret = drm_dev_init(&dpsub->drm, &zynqmp_dpsub_drm_driver, &pdev->dev);
+	if (ret < 0) {
+		kfree(dpsub);
+		return ret;
+	}
+
+	drmm_add_final_kfree(&dpsub->drm, dpsub);
+
+	/* Try the reserved memory. Proceed if there's none. */
+	of_reserved_mem_device_init(&pdev->dev);
+
+	ret = zynqmp_dpsub_init_clocks(dpsub);
+	if (ret < 0)
+		goto err_mem;
+
+	pm_runtime_enable(&pdev->dev);
+
+	/*
+	 * DP should be probed first so that the zynqmp_disp can set the output
+	 * format accordingly.
+	 */
+	ret = zynqmp_dp_probe(dpsub, &dpsub->drm);
+	if (ret)
+		goto err_pm;
+
+	ret = zynqmp_disp_probe(dpsub, &dpsub->drm);
+	if (ret)
+		goto err_dp;
+
+	ret = zynqmp_dpsub_drm_init(dpsub);
+	if (ret)
+		goto err_disp;
+
+	dev_info(&pdev->dev, "ZynqMP DisplayPort Subsystem driver probed");
+
+	return 0;
+
+err_disp:
+	zynqmp_disp_remove(dpsub);
+err_dp:
+	zynqmp_dp_remove(dpsub);
+err_pm:
+	pm_runtime_disable(&pdev->dev);
+	clk_disable_unprepare(dpsub->apb_clk);
+err_mem:
+	of_reserved_mem_device_release(&pdev->dev);
+	return ret;
+}
+
+static int zynqmp_dpsub_remove(struct platform_device *pdev)
+{
+	struct zynqmp_dpsub *dpsub = platform_get_drvdata(pdev);
+	struct drm_device *drm = &dpsub->drm;
+
+	drm_dev_unregister(drm);
+	drm_atomic_helper_shutdown(drm);
+	drm_kms_helper_poll_fini(drm);
+
+	zynqmp_disp_remove(dpsub);
+	zynqmp_dp_remove(dpsub);
+
+	pm_runtime_disable(&pdev->dev);
+	clk_disable_unprepare(dpsub->apb_clk);
+	of_reserved_mem_device_release(&pdev->dev);
+
+	drm_dev_put(drm);
+
+	return 0;
+}
+
+static void zynqmp_dpsub_shutdown(struct platform_device *pdev)
+{
+	struct zynqmp_dpsub *dpsub = platform_get_drvdata(pdev);
+
+	drm_atomic_helper_shutdown(&dpsub->drm);
+}
+
+static const struct of_device_id zynqmp_dpsub_of_match[] = {
+	{ .compatible = "xlnx,zynqmp-dpsub-1.7", },
+	{ /* end of table */ },
+};
+MODULE_DEVICE_TABLE(of, zynqmp_dpsub_of_match);
+
+static struct platform_driver zynqmp_dpsub_driver = {
+	.probe			= zynqmp_dpsub_probe,
+	.remove			= zynqmp_dpsub_remove,
+	.shutdown		= zynqmp_dpsub_shutdown,
+	.driver			= {
+		.name		= "zynqmp-dpsub",
+		.pm		= &zynqmp_dpsub_pm_ops,
+		.of_match_table	= zynqmp_dpsub_of_match,
+	},
+};
+
+module_platform_driver(zynqmp_dpsub_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("ZynqMP DP Subsystem Driver");
+MODULE_LICENSE("GPL v2");

drivers/gpu/drm/xlnx/zynqmp_dpsub.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ZynqMP DPSUB Subsystem Driver
+ *
+ * Copyright (C) 2017 - 2020 Xilinx, Inc.
+ *
+ * Authors:
+ * - Hyun Woo Kwon <hyun.kwon@xilinx.com>
+ * - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+
+#ifndef _ZYNQMP_DPSUB_H_
+#define _ZYNQMP_DPSUB_H_
+
+struct clk;
+struct device;
+struct drm_device;
+struct zynqmp_disp;
+struct zynqmp_dp;
+
+enum zynqmp_dpsub_format {
+	ZYNQMP_DPSUB_FORMAT_RGB,
+	ZYNQMP_DPSUB_FORMAT_YCRCB444,
+	ZYNQMP_DPSUB_FORMAT_YCRCB422,
+	ZYNQMP_DPSUB_FORMAT_YONLY,
+};
+
+/**
+ * struct zynqmp_dpsub - ZynqMP DisplayPort Subsystem
+ * @drm: The DRM/KMS device
+ * @dev: The physical device
+ * @apb_clk: The APB clock
+ * @disp: The display controller
+ * @dp: The DisplayPort controller
+ * @dma_align: DMA alignment constraint (must be a power of 2)
+ */
+struct zynqmp_dpsub {
+	struct drm_device drm;
+	struct device *dev;
+
+	struct clk *apb_clk;
+
+	struct zynqmp_disp *disp;
+	struct zynqmp_dp *dp;
+
+	unsigned int dma_align;
+};
+
+static inline struct zynqmp_dpsub *to_zynqmp_dpsub(struct drm_device *drm)
+{
+	return container_of(drm, struct zynqmp_dpsub, drm);
+}
+
+#endif /* _ZYNQMP_DPSUB_H_ */

include/dt-bindings/dma/xlnx-zynqmp-dpdma.h

+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright 2019 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+
+#ifndef __DT_BINDINGS_DMA_XLNX_ZYNQMP_DPDMA_H__
+#define __DT_BINDINGS_DMA_XLNX_ZYNQMP_DPDMA_H__
+
+#define ZYNQMP_DPDMA_VIDEO0		0
+#define ZYNQMP_DPDMA_VIDEO1		1
+#define ZYNQMP_DPDMA_VIDEO2		2
+#define ZYNQMP_DPDMA_GRAPHICS		3
+#define ZYNQMP_DPDMA_AUDIO0		4
+#define ZYNQMP_DPDMA_AUDIO1		5
+
+#endif /* __DT_BINDINGS_DMA_XLNX_ZYNQMP_DPDMA_H__ */

include/linux/dmaengine.h

@@ -61,6 +61,8 @@ enum dma_transaction_type {
 	DMA_SLAVE,
 	DMA_CYCLIC,
 	DMA_INTERLEAVE,
+	DMA_REPEAT,
+	DMA_LOAD_EOT,
 /* last transaction type for creation of the capabilities mask */
 	DMA_TX_TYPE_END,
 };
@@ -176,6 +178,16 @@ struct dma_interleaved_template {
  * @DMA_PREP_CMD: tell the driver that the data passed to DMA API is command
  *  data and the descriptor should be in different format from normal
  *  data descriptors.
+ * @DMA_PREP_REPEAT: tell the driver that the transaction shall be automatically
+ *  repeated when it ends until a transaction is issued on the same channel
+ *  with the DMA_PREP_LOAD_EOT flag set. This flag is only applicable to
+ *  interleaved transactions and is ignored for all other transaction types.
+ * @DMA_PREP_LOAD_EOT: tell the driver that the transaction shall replace any
+ *  active repeated (as indicated by DMA_PREP_REPEAT) transaction when the
+ *  repeated transaction ends. Not setting this flag when the previously queued
+ *  transaction is marked with DMA_PREP_REPEAT will cause the new transaction
+ *  to never be processed and stay in the issued queue forever. The flag is
+ *  ignored if the previous transaction is not a repeated transaction.
  */
 enum dma_ctrl_flags {
 	DMA_PREP_INTERRUPT = (1 << 0),
@@ -186,6 +198,8 @@ enum dma_ctrl_flags {
 	DMA_PREP_FENCE = (1 << 5),
 	DMA_CTRL_REUSE = (1 << 6),
 	DMA_PREP_CMD = (1 << 7),
+	DMA_PREP_REPEAT = (1 << 8),
+	DMA_PREP_LOAD_EOT = (1 << 9),
 };
 
 /**
@@ -980,6 +994,9 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma(
 {
 	if (!chan || !chan->device || !chan->device->device_prep_interleaved_dma)
 		return NULL;
+	if (flags & DMA_PREP_REPEAT &&
+	    !test_bit(DMA_REPEAT, chan->device->cap_mask.bits))
+		return NULL;
 
 	return chan->device->device_prep_interleaved_dma(chan, xt, flags);
 }