ARM: davinci: Constify the software nodes

Additional device properties are always just a part of a
software fwnode. If the device properties are constant, the
software node can also be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

arch/arm/mach-davinci/board-da830-evm.c

@@ -454,6 +454,10 @@ static const struct property_entry da830_evm_i2c_eeprom_properties[] = {
 	{ }
 };
 
+static const struct software_node da830_evm_i2c_eeprom_node = {
+	.properties = da830_evm_i2c_eeprom_properties,
+};
+
 static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
 		int gpio, unsigned ngpio, void *context)
 {
@@ -485,7 +489,7 @@ static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
 static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.properties = da830_evm_i2c_eeprom_properties,
+		.swnode = &da830_evm_i2c_eeprom_node,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),

arch/arm/mach-davinci/board-dm365-evm.c

@@ -232,10 +232,14 @@ static const struct property_entry eeprom_properties[] = {
 	{ }
 };
 
+static const struct software_node eeprom_node = {
+	.properties = eeprom_properties,
+};
+
 static struct i2c_board_info i2c_info[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.properties = eeprom_properties,
+		.swnode = &eeprom_node,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -541,6 +541,10 @@ static const struct property_entry eeprom_properties[] = {
 	{ }
 };
 
+static const struct software_node eeprom_node = {
+	.properties = eeprom_properties,
+};
+
 /*
  * MSP430 supports RTC, card detection, input from IR remote, and
  * a bit more.  It triggers interrupts on GPIO(7) from pressing
@@ -647,7 +651,7 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.properties = eeprom_properties,
+		.swnode = &eeprom_node,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic33", 0x1b),

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -362,6 +362,10 @@ static const struct property_entry eeprom_properties[] = {
 	PROPERTY_ENTRY_U32("pagesize", 64),
 	{ }
 };
+
+static const struct software_node eeprom_node = {
+	.properties = eeprom_properties,
+};
 #endif
 
 static u8 dm646x_iis_serializer_direction[] = {
@@ -430,7 +434,7 @@ static void evm_init_cpld(void)
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.properties  = eeprom_properties,
+		.swnode = &eeprom_node,
 	},
 	{
 		I2C_BOARD_INFO("pcf8574a", 0x38),

arch/arm/mach-davinci/board-mityomapl138.c

@@ -197,6 +197,10 @@ static const struct property_entry mityomapl138_fd_chip_properties[] = {
 	{ }
 };
 
+static const struct software_node mityomapl138_fd_chip_node = {
+	.properties = mityomapl138_fd_chip_properties,
+};
+
 static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
 	.bus_freq	= 100,	/* kHz */
 	.bus_delay	= 0,	/* usec */
@@ -323,7 +327,7 @@ static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
 	},
 	{
 		I2C_BOARD_INFO("24c02", 0x50),
-		.properties = mityomapl138_fd_chip_properties,
+		.swnode = &mityomapl138_fd_chip_node,
 	},
 };
 

arch/arm/mach-davinci/board-sffsdr.c

@@ -84,10 +84,14 @@ static const struct property_entry eeprom_properties[] = {
 	{ }
 };
 
+static const struct software_node eeprom_node = {
+	.properties = eeprom_properties,
+};
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c64", 0x50),
-		.properties = eeprom_properties,
+		.swnode = &eeprom_node,
 	},
 	/* Other I2C devices:
 	 * MSP430,  addr 0x23 (not used)