Commit 9636b755 authored by Doug Anderson's avatar Doug Anderson Committed by Greg Kroah-Hartman

tty/serial: Prevent drop of DCD on suspend for Tegra UARTs

On Tegra UARTs (except UART1), the DTR / DCD / DSR lines are not
externally accessible.  Instead, the DTR line internally appears to be
looped back to be the input to the DCD and DSR lines.  The net effect
of this is that when we drop DTR (like when we suspend), we'll see DCD
drop too.  ...and when we see DCD drop, we treat that as a hangup.

In order to prevent this hangup from occurring at every sleep, we need
to force DTR to remain high on Tegra UARTs.

This patch uses the mcr_mask / mcr_force fields, which were originally
added for the kludge ALPHA_KLUDGE_MCR.  Using these fields does not
prevent us from removing ALPHA_KLUDGE_MCR--we can just remove the "if"
tests I have added and always init mcr_mask / mcr_force from the
serial8250_config.

NOTE: If we have people that are using UARTA on a Tegra and need to
control DTR, we'll need to either add a separate port type for UARTA
or we'll need to add some tegra-specific code to detect whether the
DTR needs to be left high.
Signed-off-by: default avatarDoug Anderson <dianders@chromium.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent eca9dfa8
......@@ -308,6 +308,8 @@ static const struct serial8250_config uart_config[] = {
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
UART_FCR_T_TRIG_01,
.flags = UART_CAP_FIFO | UART_CAP_RTOIE,
.mcr_mask = ~UART_MCR_DTR,
.mcr_force = UART_MCR_DTR,
},
[PORT_XR17D15X] = {
.name = "XR17D15X",
......@@ -1229,6 +1231,10 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
up->port.fifosize = uart_config[up->port.type].fifo_size;
up->capabilities = uart_config[up->port.type].flags;
up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
if (!ALPHA_KLUDGE_MCR) {
up->mcr_mask = uart_config[up->port.type].mcr_mask;
up->mcr_force = uart_config[up->port.type].mcr_force;
}
if (up->port.type == PORT_UNKNOWN)
goto out;
......@@ -1987,6 +1993,10 @@ static int serial8250_startup(struct uart_port *port)
up->port.fifosize = uart_config[up->port.type].fifo_size;
up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
up->capabilities = uart_config[up->port.type].flags;
if (!ALPHA_KLUDGE_MCR) {
up->mcr_mask = uart_config[up->port.type].mcr_mask;
up->mcr_force = uart_config[up->port.type].mcr_force;
}
up->mcr = 0;
if (up->port.iotype != up->cur_iotype)
......@@ -2793,6 +2803,10 @@ serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type)
up->port.fifosize = uart_config[type].fifo_size;
up->capabilities = uart_config[type].flags;
up->tx_loadsz = uart_config[type].tx_loadsz;
if (!ALPHA_KLUDGE_MCR) {
up->mcr_mask = uart_config[type].mcr_mask;
up->mcr_force = uart_config[type].mcr_force;
}
}
static void __init
......
......@@ -35,6 +35,8 @@ struct serial8250_config {
unsigned short tx_loadsz;
unsigned char fcr;
unsigned int flags;
unsigned char mcr_mask;
unsigned char mcr_force;
};
#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment