powerpc/pseries: Disable MSI using new interface if possible

On upcoming hardware, we have a PCI adapter with two functions, one of
which uses MSI and the other uses MSI-X. This adapter, when MSI is
disabled using the "old" firmware interface (RTAS_CHANGE_FN), still
signals an MSI-X interrupt and triggers an EEH. We are working with the
vendor to ensure that the hardware is not at fault, but if we use the
"new" interface (RTAS_CHANGE_MSI_FN) to disable MSI, we also
automatically disable MSI-X and the adapter does not appear to signal
any stray MSI-X interrupt.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/platforms/pseries/msi.c

@@ -93,8 +93,18 @@ static void rtas_disable_msi(struct pci_dev *pdev)
 	if (!pdn)
 		return;
 
-	if (rtas_change_msi(pdn, RTAS_CHANGE_FN, 0) != 0)
-		pr_debug("rtas_msi: Setting MSIs to 0 failed!\n");
+	/*
+	 * disabling MSI with the explicit interface also disables MSI-X
+	 */
+	if (rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, 0) != 0) {
+		/* 
+		 * may have failed because explicit interface is not
+		 * present
+		 */
+		if (rtas_change_msi(pdn, RTAS_CHANGE_FN, 0) != 0) {
+			pr_debug("rtas_msi: Setting MSIs to 0 failed!\n");
+		}
+	}
 }
 
 static int rtas_query_irq_number(struct pci_dn *pdn, int offset)