Merge back cpufreq material for v4.18.

drivers/cpufreq/armada-37xx-cpufreq.c

@@ -23,6 +23,8 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
+#include "cpufreq-dt.h"
+
 /* Power management in North Bridge register set */
 #define ARMADA_37XX_NB_L0L1	0x18
 #define ARMADA_37XX_NB_L2L3	0x1C
@@ -56,6 +58,16 @@
  */
 #define LOAD_LEVEL_NR	4
 
+struct armada37xx_cpufreq_state {
+	struct regmap *regmap;
+	u32 nb_l0l1;
+	u32 nb_l2l3;
+	u32 nb_dyn_mod;
+	u32 nb_cpu_load;
+};
+
+static struct armada37xx_cpufreq_state *armada37xx_cpufreq_state;
+
 struct armada_37xx_dvfs {
 	u32 cpu_freq_max;
 	u8 divider[LOAD_LEVEL_NR];
@@ -136,7 +148,7 @@ static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
 	clk_set_parent(clk, parent);
 }
 
-static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base)
+static void armada37xx_cpufreq_disable_dvfs(struct regmap *base)
 {
 	unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
 		mask = ARMADA_37XX_NB_DFS_EN;
@@ -162,10 +174,47 @@ static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base)
 	regmap_update_bits(base, reg, mask, mask);
 }
 
+static int armada37xx_cpufreq_suspend(struct cpufreq_policy *policy)
+{
+	struct armada37xx_cpufreq_state *state = armada37xx_cpufreq_state;
+
+	regmap_read(state->regmap, ARMADA_37XX_NB_L0L1, &state->nb_l0l1);
+	regmap_read(state->regmap, ARMADA_37XX_NB_L2L3, &state->nb_l2l3);
+	regmap_read(state->regmap, ARMADA_37XX_NB_CPU_LOAD,
+		    &state->nb_cpu_load);
+	regmap_read(state->regmap, ARMADA_37XX_NB_DYN_MOD, &state->nb_dyn_mod);
+
+	return 0;
+}
+
+static int armada37xx_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	struct armada37xx_cpufreq_state *state = armada37xx_cpufreq_state;
+
+	/* Ensure DVFS is disabled otherwise the following registers are RO */
+	armada37xx_cpufreq_disable_dvfs(state->regmap);
+
+	regmap_write(state->regmap, ARMADA_37XX_NB_L0L1, state->nb_l0l1);
+	regmap_write(state->regmap, ARMADA_37XX_NB_L2L3, state->nb_l2l3);
+	regmap_write(state->regmap, ARMADA_37XX_NB_CPU_LOAD,
+		     state->nb_cpu_load);
+
+	/*
+	 * NB_DYN_MOD register is the one that actually enable back DVFS if it
+	 * was enabled before the suspend operation. This must be done last
+	 * otherwise other registers are not writable.
+	 */
+	regmap_write(state->regmap, ARMADA_37XX_NB_DYN_MOD, state->nb_dyn_mod);
+
+	return 0;
+}
+
 static int __init armada37xx_cpufreq_driver_init(void)
 {
+	struct cpufreq_dt_platform_data pdata;
 	struct armada_37xx_dvfs *dvfs;
 	struct platform_device *pdev;
+	unsigned long freq;
 	unsigned int cur_frequency;
 	struct regmap *nb_pm_base;
 	struct device *cpu_dev;
@@ -207,33 +256,58 @@ static int __init armada37xx_cpufreq_driver_init(void)
 	}
 
 	dvfs = armada_37xx_cpu_freq_info_get(cur_frequency);
-	if (!dvfs)
+	if (!dvfs) {
+		clk_put(clk);
 		return -EINVAL;
+	}
+
+	armada37xx_cpufreq_state = kmalloc(sizeof(*armada37xx_cpufreq_state),
+					   GFP_KERNEL);
+	if (!armada37xx_cpufreq_state) {
+		clk_put(clk);
+		return -ENOMEM;
+	}
+
+	armada37xx_cpufreq_state->regmap = nb_pm_base;
 
 	armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
 	clk_put(clk);
 
 	for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
 	     load_lvl++) {
-		unsigned long freq = cur_frequency / dvfs->divider[load_lvl];
+		freq = cur_frequency / dvfs->divider[load_lvl];
 
 		ret = dev_pm_opp_add(cpu_dev, freq, 0);
-		if (ret) {
-			/* clean-up the already added opp before leaving */
-			while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
-				freq = cur_frequency / dvfs->divider[load_lvl];
-				dev_pm_opp_remove(cpu_dev, freq);
-			}
-			return ret;
-		}
+		if (ret)
+			goto remove_opp;
 	}
 
 	/* Now that everything is setup, enable the DVFS at hardware level */
 	armada37xx_cpufreq_enable_dvfs(nb_pm_base);
 
-	pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+	pdata.suspend = armada37xx_cpufreq_suspend;
+	pdata.resume = armada37xx_cpufreq_resume;
+
+	pdev = platform_device_register_data(NULL, "cpufreq-dt", -1, &pdata,
+					     sizeof(pdata));
+	ret = PTR_ERR_OR_ZERO(pdev);
+	if (ret)
+		goto disable_dvfs;
+
+	return 0;
+
+disable_dvfs:
+	armada37xx_cpufreq_disable_dvfs(nb_pm_base);
+remove_opp:
+	/* clean-up the already added opp before leaving */
+	while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
+		freq = cur_frequency / dvfs->divider[load_lvl];
+		dev_pm_opp_remove(cpu_dev, freq);
+	}
+
+	kfree(armada37xx_cpufreq_state);
 
-	return PTR_ERR_OR_ZERO(pdev);
+	return ret;
 }
 /* late_initcall, to guarantee the driver is loaded after A37xx clock driver */
 late_initcall(armada37xx_cpufreq_driver_init);

drivers/cpufreq/cpufreq-dt-platdev.c

@@ -66,8 +66,6 @@ static const struct of_device_id whitelist[] __initconst = {
 	{ .compatible = "renesas,r8a7792", },
 	{ .compatible = "renesas,r8a7793", },
 	{ .compatible = "renesas,r8a7794", },
-	{ .compatible = "renesas,r8a7795", },
-	{ .compatible = "renesas,r8a7796", },
 	{ .compatible = "renesas,sh73a0", },
 
 	{ .compatible = "rockchip,rk2928", },

drivers/cpufreq/cpufreq-dt.c

@@ -346,8 +346,14 @@ static int dt_cpufreq_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	if (data && data->have_governor_per_policy)
-		dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
+	if (data) {
+		if (data->have_governor_per_policy)
+			dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
+
+		dt_cpufreq_driver.resume = data->resume;
+		if (data->suspend)
+			dt_cpufreq_driver.suspend = data->suspend;
+	}
 
 	ret = cpufreq_register_driver(&dt_cpufreq_driver);
 	if (ret)

drivers/cpufreq/cpufreq-dt.h

@@ -12,8 +12,13 @@
 
 #include <linux/types.h>
 
+struct cpufreq_policy;
+
 struct cpufreq_dt_platform_data {
 	bool have_governor_per_policy;
+
+	int (*suspend)(struct cpufreq_policy *policy);
+	int (*resume)(struct cpufreq_policy *policy);
 };
 
 #endif /* __CPUFREQ_DT_H__ */

drivers/cpufreq/cpufreq.c

@@ -300,8 +300,19 @@ static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
 #endif
 }
 
-static void __cpufreq_notify_transition(struct cpufreq_policy *policy,
-		struct cpufreq_freqs *freqs, unsigned int state)
+/**
+ * cpufreq_notify_transition - Notify frequency transition and adjust_jiffies.
+ * @policy: cpufreq policy to enable fast frequency switching for.
+ * @freqs: contain details of the frequency update.
+ * @state: set to CPUFREQ_PRECHANGE or CPUFREQ_POSTCHANGE.
+ *
+ * This function calls the transition notifiers and the "adjust_jiffies"
+ * function. It is called twice on all CPU frequency changes that have
+ * external effects.
+ */
+static void cpufreq_notify_transition(struct cpufreq_policy *policy,
+				      struct cpufreq_freqs *freqs,
+				      unsigned int state)
 {
 	BUG_ON(irqs_disabled());
 
@@ -313,54 +324,44 @@ static void __cpufreq_notify_transition(struct cpufreq_policy *policy,
 		 state, freqs->new);
 
 	switch (state) {
-
 	case CPUFREQ_PRECHANGE:
-		/* detect if the driver reported a value as "old frequency"
+		/*
+		 * Detect if the driver reported a value as "old frequency"
 		 * which is not equal to what the cpufreq core thinks is
 		 * "old frequency".
 		 */
 		if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
-			if ((policy) && (policy->cpu == freqs->cpu) &&
-			    (policy->cur) && (policy->cur != freqs->old)) {
+			if (policy->cur && (policy->cur != freqs->old)) {
 				pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
 					 freqs->old, policy->cur);
 				freqs->old = policy->cur;
 			}
 		}
-		srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
-				CPUFREQ_PRECHANGE, freqs);
+
+		for_each_cpu(freqs->cpu, policy->cpus) {
+			srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
+						 CPUFREQ_PRECHANGE, freqs);
+		}
+
 		adjust_jiffies(CPUFREQ_PRECHANGE, freqs);
 		break;
 
 	case CPUFREQ_POSTCHANGE:
 		adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
-		pr_debug("FREQ: %lu - CPU: %lu\n",
-			 (unsigned long)freqs->new, (unsigned long)freqs->cpu);
-		trace_cpu_frequency(freqs->new, freqs->cpu);
+		pr_debug("FREQ: %u - CPUs: %*pbl\n", freqs->new,
+			 cpumask_pr_args(policy->cpus));
+
+		for_each_cpu(freqs->cpu, policy->cpus) {
+			trace_cpu_frequency(freqs->new, freqs->cpu);
+			srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
+						 CPUFREQ_POSTCHANGE, freqs);
+		}
+
 		cpufreq_stats_record_transition(policy, freqs->new);
-		srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
-				CPUFREQ_POSTCHANGE, freqs);
-		if (likely(policy) && likely(policy->cpu == freqs->cpu))
-			policy->cur = freqs->new;
-		break;
+		policy->cur = freqs->new;
 	}
 }
 
-/**
- * cpufreq_notify_transition - call notifier chain and adjust_jiffies
- * on frequency transition.
- *
- * This function calls the transition notifiers and the "adjust_jiffies"
- * function. It is called twice on all CPU frequency changes that have
- * external effects.
- */
-static void cpufreq_notify_transition(struct cpufreq_policy *policy,
-		struct cpufreq_freqs *freqs, unsigned int state)
-{
-	for_each_cpu(freqs->cpu, policy->cpus)
-		__cpufreq_notify_transition(policy, freqs, state);
-}
-
 /* Do post notifications when there are chances that transition has failed */
 static void cpufreq_notify_post_transition(struct cpufreq_policy *policy,
 		struct cpufreq_freqs *freqs, int transition_failed)

drivers/cpufreq/intel_pstate.c

@@ -1939,13 +1939,51 @@ static int intel_cpufreq_verify_policy(struct cpufreq_policy *policy)
 	return 0;
 }
 
+/* Use of trace in passive mode:
+ *
+ * In passive mode the trace core_busy field (also known as the
+ * performance field, and lablelled as such on the graphs; also known as
+ * core_avg_perf) is not needed and so is re-assigned to indicate if the
+ * driver call was via the normal or fast switch path. Various graphs
+ * output from the intel_pstate_tracer.py utility that include core_busy
+ * (or performance or core_avg_perf) have a fixed y-axis from 0 to 100%,
+ * so we use 10 to indicate the the normal path through the driver, and
+ * 90 to indicate the fast switch path through the driver.
+ * The scaled_busy field is not used, and is set to 0.
+ */
+
+#define	INTEL_PSTATE_TRACE_TARGET 10
+#define	INTEL_PSTATE_TRACE_FAST_SWITCH 90
+
+static void intel_cpufreq_trace(struct cpudata *cpu, unsigned int trace_type, int old_pstate)
+{
+	struct sample *sample;
+
+	if (!trace_pstate_sample_enabled())
+		return;
+
+	if (!intel_pstate_sample(cpu, ktime_get()))
+		return;
+
+	sample = &cpu->sample;
+	trace_pstate_sample(trace_type,
+		0,
+		old_pstate,
+		cpu->pstate.current_pstate,
+		sample->mperf,
+		sample->aperf,
+		sample->tsc,
+		get_avg_frequency(cpu),
+		fp_toint(cpu->iowait_boost * 100));
+}
+
 static int intel_cpufreq_target(struct cpufreq_policy *policy,
 				unsigned int target_freq,
 				unsigned int relation)
 {
 	struct cpudata *cpu = all_cpu_data[policy->cpu];
 	struct cpufreq_freqs freqs;
-	int target_pstate;
+	int target_pstate, old_pstate;
 
 	update_turbo_state();
 
@@ -1965,12 +2003,14 @@ static int intel_cpufreq_target(struct cpufreq_policy *policy,
 		break;
 	}
 	target_pstate = intel_pstate_prepare_request(cpu, target_pstate);
+	old_pstate = cpu->pstate.current_pstate;
 	if (target_pstate != cpu->pstate.current_pstate) {
 		cpu->pstate.current_pstate = target_pstate;
 		wrmsrl_on_cpu(policy->cpu, MSR_IA32_PERF_CTL,
 			      pstate_funcs.get_val(cpu, target_pstate));
 	}
 	freqs.new = target_pstate * cpu->pstate.scaling;
+	intel_cpufreq_trace(cpu, INTEL_PSTATE_TRACE_TARGET, old_pstate);
 	cpufreq_freq_transition_end(policy, &freqs, false);
 
 	return 0;
@@ -1980,13 +2020,15 @@ static unsigned int intel_cpufreq_fast_switch(struct cpufreq_policy *policy,
 					      unsigned int target_freq)
 {
 	struct cpudata *cpu = all_cpu_data[policy->cpu];
-	int target_pstate;
+	int target_pstate, old_pstate;
 
 	update_turbo_state();
 
 	target_pstate = DIV_ROUND_UP(target_freq, cpu->pstate.scaling);
 	target_pstate = intel_pstate_prepare_request(cpu, target_pstate);
+	old_pstate = cpu->pstate.current_pstate;
 	intel_pstate_update_pstate(cpu, target_pstate);
+	intel_cpufreq_trace(cpu, INTEL_PSTATE_TRACE_FAST_SWITCH, old_pstate);
 	return target_pstate * cpu->pstate.scaling;
 }
 

drivers/cpufreq/s3c2440-cpufreq.c

@@ -143,7 +143,7 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
 {
 	unsigned long clkdiv, camdiv;
 
-	s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+	s3c_freq_dbg("%s: divisors: h=%d, p=%d\n", __func__,
 		     cfg->divs.h_divisor, cfg->divs.p_divisor);
 
 	clkdiv = __raw_readl(S3C2410_CLKDIVN);

drivers/cpufreq/speedstep-lib.c

@@ -252,7 +252,7 @@ EXPORT_SYMBOL_GPL(speedstep_get_frequency);
  *********************************************************************/
 
 /* Keep in sync with the x86_cpu_id tables in the different modules */
-unsigned int speedstep_detect_processor(void)
+enum speedstep_processor speedstep_detect_processor(void)
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);
 	u32 ebx, msr_lo, msr_hi;