Commit 968ab183 authored by Linus Torvalds's avatar Linus Torvalds

include/linux/kernel.h: Move logging bits to include/linux/printk.h

Move the logging bits from kernel.h into printk.h so that
there is a bit more logical separation of the generic from
the printk logging specific parts.
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 22d3243d
...@@ -17,13 +17,11 @@ ...@@ -17,13 +17,11 @@
#include <linux/bitops.h> #include <linux/bitops.h>
#include <linux/log2.h> #include <linux/log2.h>
#include <linux/typecheck.h> #include <linux/typecheck.h>
#include <linux/printk.h>
#include <linux/dynamic_debug.h> #include <linux/dynamic_debug.h>
#include <asm/byteorder.h> #include <asm/byteorder.h>
#include <asm/bug.h> #include <asm/bug.h>
extern const char linux_banner[];
extern const char linux_proc_banner[];
#define USHRT_MAX ((u16)(~0U)) #define USHRT_MAX ((u16)(~0U))
#define SHRT_MAX ((s16)(USHRT_MAX>>1)) #define SHRT_MAX ((s16)(USHRT_MAX>>1))
#define SHRT_MIN ((s16)(-SHRT_MAX - 1)) #define SHRT_MIN ((s16)(-SHRT_MAX - 1))
...@@ -110,31 +108,6 @@ extern const char linux_proc_banner[]; ...@@ -110,31 +108,6 @@ extern const char linux_proc_banner[];
*/ */
#define lower_32_bits(n) ((u32)(n)) #define lower_32_bits(n) ((u32)(n))
#define KERN_EMERG "<0>" /* system is unusable */
#define KERN_ALERT "<1>" /* action must be taken immediately */
#define KERN_CRIT "<2>" /* critical conditions */
#define KERN_ERR "<3>" /* error conditions */
#define KERN_WARNING "<4>" /* warning conditions */
#define KERN_NOTICE "<5>" /* normal but significant condition */
#define KERN_INFO "<6>" /* informational */
#define KERN_DEBUG "<7>" /* debug-level messages */
/* Use the default kernel loglevel */
#define KERN_DEFAULT "<d>"
/*
* Annotation for a "continued" line of log printout (only done after a
* line that had no enclosing \n). Only to be used by core/arch code
* during early bootup (a continued line is not SMP-safe otherwise).
*/
#define KERN_CONT "<c>"
extern int console_printk[];
#define console_loglevel (console_printk[0])
#define default_message_loglevel (console_printk[1])
#define minimum_console_loglevel (console_printk[2])
#define default_console_loglevel (console_printk[3])
struct completion; struct completion;
struct pt_regs; struct pt_regs;
struct user; struct user;
...@@ -187,11 +160,6 @@ static inline void might_fault(void) ...@@ -187,11 +160,6 @@ static inline void might_fault(void)
} }
#endif #endif
struct va_format {
const char *fmt;
va_list *va;
};
extern struct atomic_notifier_head panic_notifier_list; extern struct atomic_notifier_head panic_notifier_list;
extern long (*panic_blink)(int state); extern long (*panic_blink)(int state);
NORET_TYPE void panic(const char * fmt, ...) NORET_TYPE void panic(const char * fmt, ...)
...@@ -245,115 +213,8 @@ extern int func_ptr_is_kernel_text(void *ptr); ...@@ -245,115 +213,8 @@ extern int func_ptr_is_kernel_text(void *ptr);
struct pid; struct pid;
extern struct pid *session_of_pgrp(struct pid *pgrp); extern struct pid *session_of_pgrp(struct pid *pgrp);
/*
* FW_BUG
* Add this to a message where you are sure the firmware is buggy or behaves
* really stupid or out of spec. Be aware that the responsible BIOS developer
* should be able to fix this issue or at least get a concrete idea of the
* problem by reading your message without the need of looking at the kernel
* code.
*
* Use it for definite and high priority BIOS bugs.
*
* FW_WARN
* Use it for not that clear (e.g. could the kernel messed up things already?)
* and medium priority BIOS bugs.
*
* FW_INFO
* Use this one if you want to tell the user or vendor about something
* suspicious, but generally harmless related to the firmware.
*
* Use it for information or very low priority BIOS bugs.
*/
#define FW_BUG "[Firmware Bug]: "
#define FW_WARN "[Firmware Warn]: "
#define FW_INFO "[Firmware Info]: "
/*
* HW_ERR
* Add this to a message for hardware errors, so that user can report
* it to hardware vendor instead of LKML or software vendor.
*/
#define HW_ERR "[Hardware Error]: "
#ifdef CONFIG_PRINTK
asmlinkage int vprintk(const char *fmt, va_list args)
__attribute__ ((format (printf, 1, 0)));
asmlinkage int printk(const char * fmt, ...)
__attribute__ ((format (printf, 1, 2))) __cold;
/*
* Please don't use printk_ratelimit(), because it shares ratelimiting state
* with all other unrelated printk_ratelimit() callsites. Instead use
* printk_ratelimited() or plain old __ratelimit().
*/
extern int __printk_ratelimit(const char *func);
#define printk_ratelimit() __printk_ratelimit(__func__)
extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
unsigned int interval_msec);
extern int printk_delay_msec;
extern int dmesg_restrict;
/*
* Print a one-time message (analogous to WARN_ONCE() et al):
*/
#define printk_once(x...) ({ \
static bool __print_once; \
\
if (!__print_once) { \
__print_once = true; \
printk(x); \
} \
})
void log_buf_kexec_setup(void);
#else
static inline int vprintk(const char *s, va_list args)
__attribute__ ((format (printf, 1, 0)));
static inline int vprintk(const char *s, va_list args) { return 0; }
static inline int printk(const char *s, ...)
__attribute__ ((format (printf, 1, 2)));
static inline int __cold printk(const char *s, ...) { return 0; }
static inline int printk_ratelimit(void) { return 0; }
static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
unsigned int interval_msec) \
{ return false; }
/* No effect, but we still get type checking even in the !PRINTK case: */
#define printk_once(x...) printk(x)
static inline void log_buf_kexec_setup(void)
{
}
#endif
/*
* Dummy printk for disabled debugging statements to use whilst maintaining
* gcc's format and side-effect checking.
*/
static inline __attribute__ ((format (printf, 1, 2)))
int no_printk(const char *s, ...) { return 0; }
extern int printk_needs_cpu(int cpu);
extern void printk_tick(void);
extern void asmlinkage __attribute__((format(printf, 1, 2)))
early_printk(const char *fmt, ...);
unsigned long int_sqrt(unsigned long); unsigned long int_sqrt(unsigned long);
static inline void console_silent(void)
{
console_loglevel = 0;
}
static inline void console_verbose(void)
{
if (console_loglevel)
console_loglevel = 15;
}
extern void bust_spinlocks(int yes); extern void bust_spinlocks(int yes);
extern void wake_up_klogd(void); extern void wake_up_klogd(void);
extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */ extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
...@@ -390,22 +251,6 @@ extern enum system_states { ...@@ -390,22 +251,6 @@ extern enum system_states {
#define TAINT_CRAP 10 #define TAINT_CRAP 10
#define TAINT_FIRMWARE_WORKAROUND 11 #define TAINT_FIRMWARE_WORKAROUND 11
extern void dump_stack(void) __cold;
enum {
DUMP_PREFIX_NONE,
DUMP_PREFIX_ADDRESS,
DUMP_PREFIX_OFFSET
};
extern void hex_dump_to_buffer(const void *buf, size_t len,
int rowsize, int groupsize,
char *linebuf, size_t linebuflen, bool ascii);
extern void print_hex_dump(const char *level, const char *prefix_str,
int prefix_type, int rowsize, int groupsize,
const void *buf, size_t len, bool ascii);
extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
const void *buf, size_t len);
extern const char hex_asc[]; extern const char hex_asc[];
#define hex_asc_lo(x) hex_asc[((x) & 0x0f)] #define hex_asc_lo(x) hex_asc[((x) & 0x0f)]
#define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4] #define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4]
...@@ -419,94 +264,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte) ...@@ -419,94 +264,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte)
extern int hex_to_bin(char ch); extern int hex_to_bin(char ch);
#ifndef pr_fmt
#define pr_fmt(fmt) fmt
#endif
#define pr_emerg(fmt, ...) \
printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
#define pr_alert(fmt, ...) \
printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_crit(fmt, ...) \
printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_err(fmt, ...) \
printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warning(fmt, ...) \
printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warn pr_warning
#define pr_notice(fmt, ...) \
printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
#define pr_info(fmt, ...) \
printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
#define pr_cont(fmt, ...) \
printk(KERN_CONT fmt, ##__VA_ARGS__)
/* pr_devel() should produce zero code unless DEBUG is defined */
#ifdef DEBUG
#define pr_devel(fmt, ...) \
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_devel(fmt, ...) \
({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
#endif
/* If you are writing a driver, please use dev_dbg instead */
#if defined(DEBUG)
#define pr_debug(fmt, ...) \
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#elif defined(CONFIG_DYNAMIC_DEBUG)
/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
#define pr_debug(fmt, ...) \
dynamic_pr_debug(fmt, ##__VA_ARGS__)
#else
#define pr_debug(fmt, ...) \
({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
#endif
/*
* ratelimited messages with local ratelimit_state,
* no local ratelimit_state used in the !PRINTK case
*/
#ifdef CONFIG_PRINTK
#define printk_ratelimited(fmt, ...) ({ \
static DEFINE_RATELIMIT_STATE(_rs, \
DEFAULT_RATELIMIT_INTERVAL, \
DEFAULT_RATELIMIT_BURST); \
\
if (__ratelimit(&_rs)) \
printk(fmt, ##__VA_ARGS__); \
})
#else
/* No effect, but we still get type checking even in the !PRINTK case: */
#define printk_ratelimited printk
#endif
#define pr_emerg_ratelimited(fmt, ...) \
printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
#define pr_alert_ratelimited(fmt, ...) \
printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_crit_ratelimited(fmt, ...) \
printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_err_ratelimited(fmt, ...) \
printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warning_ratelimited(fmt, ...) \
printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warn_ratelimited pr_warning_ratelimited
#define pr_notice_ratelimited(fmt, ...) \
printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
#define pr_info_ratelimited(fmt, ...) \
printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
/* no pr_cont_ratelimited, don't do that... */
/* If you are writing a driver, please use dev_dbg instead */
#if defined(DEBUG)
#define pr_debug_ratelimited(fmt, ...) \
printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_debug_ratelimited(fmt, ...) \
({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
##__VA_ARGS__); 0; })
#endif
/* /*
* General tracing related utility functions - trace_printk(), * General tracing related utility functions - trace_printk(),
* tracing_on/tracing_off and tracing_start()/tracing_stop * tracing_on/tracing_off and tracing_start()/tracing_stop
......
#ifndef __KERNEL_PRINTK__
#define __KERNEL_PRINTK__
extern const char linux_banner[];
extern const char linux_proc_banner[];
#define KERN_EMERG "<0>" /* system is unusable */
#define KERN_ALERT "<1>" /* action must be taken immediately */
#define KERN_CRIT "<2>" /* critical conditions */
#define KERN_ERR "<3>" /* error conditions */
#define KERN_WARNING "<4>" /* warning conditions */
#define KERN_NOTICE "<5>" /* normal but significant condition */
#define KERN_INFO "<6>" /* informational */
#define KERN_DEBUG "<7>" /* debug-level messages */
/* Use the default kernel loglevel */
#define KERN_DEFAULT "<d>"
/*
* Annotation for a "continued" line of log printout (only done after a
* line that had no enclosing \n). Only to be used by core/arch code
* during early bootup (a continued line is not SMP-safe otherwise).
*/
#define KERN_CONT "<c>"
extern int console_printk[];
#define console_loglevel (console_printk[0])
#define default_message_loglevel (console_printk[1])
#define minimum_console_loglevel (console_printk[2])
#define default_console_loglevel (console_printk[3])
struct va_format {
const char *fmt;
va_list *va;
};
/*
* FW_BUG
* Add this to a message where you are sure the firmware is buggy or behaves
* really stupid or out of spec. Be aware that the responsible BIOS developer
* should be able to fix this issue or at least get a concrete idea of the
* problem by reading your message without the need of looking at the kernel
* code.
*
* Use it for definite and high priority BIOS bugs.
*
* FW_WARN
* Use it for not that clear (e.g. could the kernel messed up things already?)
* and medium priority BIOS bugs.
*
* FW_INFO
* Use this one if you want to tell the user or vendor about something
* suspicious, but generally harmless related to the firmware.
*
* Use it for information or very low priority BIOS bugs.
*/
#define FW_BUG "[Firmware Bug]: "
#define FW_WARN "[Firmware Warn]: "
#define FW_INFO "[Firmware Info]: "
/*
* HW_ERR
* Add this to a message for hardware errors, so that user can report
* it to hardware vendor instead of LKML or software vendor.
*/
#define HW_ERR "[Hardware Error]: "
#ifdef CONFIG_PRINTK
asmlinkage int vprintk(const char *fmt, va_list args)
__attribute__ ((format (printf, 1, 0)));
asmlinkage int printk(const char * fmt, ...)
__attribute__ ((format (printf, 1, 2))) __cold;
/*
* Please don't use printk_ratelimit(), because it shares ratelimiting state
* with all other unrelated printk_ratelimit() callsites. Instead use
* printk_ratelimited() or plain old __ratelimit().
*/
extern int __printk_ratelimit(const char *func);
#define printk_ratelimit() __printk_ratelimit(__func__)
extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
unsigned int interval_msec);
extern int printk_delay_msec;
extern int dmesg_restrict;
/*
* Print a one-time message (analogous to WARN_ONCE() et al):
*/
#define printk_once(x...) ({ \
static bool __print_once; \
\
if (!__print_once) { \
__print_once = true; \
printk(x); \
} \
})
void log_buf_kexec_setup(void);
#else
static inline int vprintk(const char *s, va_list args)
__attribute__ ((format (printf, 1, 0)));
static inline int vprintk(const char *s, va_list args) { return 0; }
static inline int printk(const char *s, ...)
__attribute__ ((format (printf, 1, 2)));
static inline int __cold printk(const char *s, ...) { return 0; }
static inline int printk_ratelimit(void) { return 0; }
static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
unsigned int interval_msec) \
{ return false; }
/* No effect, but we still get type checking even in the !PRINTK case: */
#define printk_once(x...) printk(x)
static inline void log_buf_kexec_setup(void)
{
}
#endif
/*
* Dummy printk for disabled debugging statements to use whilst maintaining
* gcc's format and side-effect checking.
*/
static inline __attribute__ ((format (printf, 1, 2)))
int no_printk(const char *s, ...) { return 0; }
extern int printk_needs_cpu(int cpu);
extern void printk_tick(void);
extern void asmlinkage __attribute__((format(printf, 1, 2)))
early_printk(const char *fmt, ...);
static inline void console_silent(void)
{
console_loglevel = 0;
}
static inline void console_verbose(void)
{
if (console_loglevel)
console_loglevel = 15;
}
extern void dump_stack(void) __cold;
enum {
DUMP_PREFIX_NONE,
DUMP_PREFIX_ADDRESS,
DUMP_PREFIX_OFFSET
};
extern void hex_dump_to_buffer(const void *buf, size_t len,
int rowsize, int groupsize,
char *linebuf, size_t linebuflen, bool ascii);
extern void print_hex_dump(const char *level, const char *prefix_str,
int prefix_type, int rowsize, int groupsize,
const void *buf, size_t len, bool ascii);
extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
const void *buf, size_t len);
#ifndef pr_fmt
#define pr_fmt(fmt) fmt
#endif
#define pr_emerg(fmt, ...) \
printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
#define pr_alert(fmt, ...) \
printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_crit(fmt, ...) \
printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_err(fmt, ...) \
printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warning(fmt, ...) \
printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warn pr_warning
#define pr_notice(fmt, ...) \
printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
#define pr_info(fmt, ...) \
printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
#define pr_cont(fmt, ...) \
printk(KERN_CONT fmt, ##__VA_ARGS__)
/* pr_devel() should produce zero code unless DEBUG is defined */
#ifdef DEBUG
#define pr_devel(fmt, ...) \
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_devel(fmt, ...) \
({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
#endif
/* If you are writing a driver, please use dev_dbg instead */
#if defined(DEBUG)
#define pr_debug(fmt, ...) \
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#elif defined(CONFIG_DYNAMIC_DEBUG)
/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
#define pr_debug(fmt, ...) \
dynamic_pr_debug(fmt, ##__VA_ARGS__)
#else
#define pr_debug(fmt, ...) \
({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
#endif
/*
* ratelimited messages with local ratelimit_state,
* no local ratelimit_state used in the !PRINTK case
*/
#ifdef CONFIG_PRINTK
#define printk_ratelimited(fmt, ...) ({ \
static DEFINE_RATELIMIT_STATE(_rs, \
DEFAULT_RATELIMIT_INTERVAL, \
DEFAULT_RATELIMIT_BURST); \
\
if (__ratelimit(&_rs)) \
printk(fmt, ##__VA_ARGS__); \
})
#else
/* No effect, but we still get type checking even in the !PRINTK case: */
#define printk_ratelimited printk
#endif
#define pr_emerg_ratelimited(fmt, ...) \
printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
#define pr_alert_ratelimited(fmt, ...) \
printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_crit_ratelimited(fmt, ...) \
printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_err_ratelimited(fmt, ...) \
printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warning_ratelimited(fmt, ...) \
printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warn_ratelimited pr_warning_ratelimited
#define pr_notice_ratelimited(fmt, ...) \
printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
#define pr_info_ratelimited(fmt, ...) \
printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
/* no pr_cont_ratelimited, don't do that... */
/* If you are writing a driver, please use dev_dbg instead */
#if defined(DEBUG)
#define pr_debug_ratelimited(fmt, ...) \
printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_debug_ratelimited(fmt, ...) \
({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
##__VA_ARGS__); 0; })
#endif
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment