Commit 96e132eb authored by Jiri Kosina's avatar Jiri Kosina

Merge branches 'for-4.10/asus', 'for-4.10/cp2112', 'for-4.10/i2c-hid-nopower',...

Merge branches 'for-4.10/asus', 'for-4.10/cp2112', 'for-4.10/i2c-hid-nopower', 'for-4.10/intel-ish', 'for-4.10/mayflash', 'for-4.10/microsoft-surface-3', 'for-4.10/multitouch', 'for-4.10/sony', 'for-4.10/udraw-ps3', 'for-4.10/upstream' and 'for-4.10/wacom/generic' into for-linus
......@@ -12342,6 +12342,12 @@ S: Maintained
F: Documentation/filesystems/udf.txt
F: fs/udf/
UDRAW TABLET
M: Bastien Nocera <hadess@hadess.net>
L: linux-input@vger.kernel.org
S: Maintained
F: drivers/hid/hid-udraw.c
UFS FILESYSTEM
M: Evgeniy Dushistov <dushistov@mail.ru>
S: Maintained
......
......@@ -214,7 +214,7 @@ config HID_CMEDIA
config HID_CP2112
tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
depends on USB_HID && I2C && GPIOLIB
depends on USB_HID && I2C && GPIOLIB && GPIOLIB_IRQCHIP
---help---
Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
This is a HID device driver which registers as an i2c adapter
......@@ -512,6 +512,14 @@ config HID_MAGICMOUSE
Say Y here if you want support for the multi-touch features of the
Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
config HID_MAYFLASH
tristate "Mayflash game controller adapter force feedback"
depends on HID
select INPUT_FF_MEMLESS
---help---
Say Y here if you have HJZ Mayflash PS3 game controller adapters
and want to enable force feedback support.
config HID_MICROSOFT
tristate "Microsoft non-fully HID-compliant devices"
depends on HID
......@@ -861,6 +869,13 @@ config THRUSTMASTER_FF
a THRUSTMASTER Dual Trigger 3-in-1 or a THRUSTMASTER Ferrari GT
Rumble Force or Force Feedback Wheel.
config HID_UDRAW_PS3
tristate "THQ PS3 uDraw tablet"
depends on HID
---help---
Say Y here if you want to use the THQ uDraw gaming tablet for
the PS3.
config HID_WACOM
tristate "Wacom Intuos/Graphire tablet support (USB)"
depends on HID
......
......@@ -58,6 +58,7 @@ obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o
obj-$(CONFIG_HID_LOGITECH_DJ) += hid-logitech-dj.o
obj-$(CONFIG_HID_LOGITECH_HIDPP) += hid-logitech-hidpp.o
obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o
obj-$(CONFIG_HID_MAYFLASH) += hid-mf.o
obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o
obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
obj-$(CONFIG_HID_MULTITOUCH) += hid-multitouch.o
......@@ -96,6 +97,7 @@ obj-$(CONFIG_HID_TIVO) += hid-tivo.o
obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o
obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o
obj-$(CONFIG_HID_UCLOGIC) += hid-uclogic.o
obj-$(CONFIG_HID_UDRAW_PS3) += hid-udraw-ps3.o
obj-$(CONFIG_HID_LED) += hid-led.o
obj-$(CONFIG_HID_XINMO) += hid-xinmo.o
obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o
......
......@@ -727,8 +727,9 @@ static void hid_scan_collection(struct hid_parser *parser, unsigned type)
(hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3 ||
hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2 ||
hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP ||
hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4 ||
hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2 ||
hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP ||
hid->product == USB_DEVICE_ID_MS_TYPE_COVER_3 ||
hid->product == USB_DEVICE_ID_MS_POWER_COVER) &&
hid->group == HID_GROUP_MULTITOUCH)
hid->group = HID_GROUP_GENERIC;
......@@ -1884,6 +1885,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DELCOM, USB_DEVICE_ID_DELCOM_VISUAL_IND) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011) },
#if IS_ENABLED(CONFIG_HID_MAYFLASH)
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3) },
#endif
{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_WN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_FA) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
......@@ -1984,8 +1988,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_7K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_600) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3KV1) },
......@@ -2060,6 +2065,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SINO_LITE, USB_DEVICE_ID_SINO_LITE_CONTROLLER) },
......@@ -2087,6 +2095,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THQ, USB_DEVICE_ID_THQ_PS3_UDRAW) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_YIYNOVA_TABLET) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_81) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_45) },
......
......@@ -24,6 +24,7 @@
* http://www.silabs.com/Support%20Documents/TechnicalDocs/AN495.pdf
*/
#include <linux/gpio.h>
#include <linux/gpio/driver.h>
#include <linux/hid.h>
#include <linux/i2c.h>
......@@ -168,6 +169,12 @@ struct cp2112_device {
struct gpio_chip gc;
u8 *in_out_buffer;
spinlock_t lock;
struct gpio_desc *desc[8];
bool gpio_poll;
struct delayed_work gpio_poll_worker;
unsigned long irq_mask;
u8 gpio_prev_state;
};
static int gpio_push_pull = 0xFF;
......@@ -233,7 +240,7 @@ static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
spin_unlock_irqrestore(&dev->lock, flags);
}
static int cp2112_gpio_get(struct gpio_chip *chip, unsigned offset)
static int cp2112_gpio_get_all(struct gpio_chip *chip)
{
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
......@@ -252,7 +259,7 @@ static int cp2112_gpio_get(struct gpio_chip *chip, unsigned offset)
goto exit;
}
ret = (buf[1] >> offset) & 1;
ret = buf[1];
exit:
spin_unlock_irqrestore(&dev->lock, flags);
......@@ -260,6 +267,17 @@ static int cp2112_gpio_get(struct gpio_chip *chip, unsigned offset)
return ret;
}
static int cp2112_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
int ret;
ret = cp2112_gpio_get_all(chip);
if (ret < 0)
return ret;
return (ret >> offset) & 1;
}
static int cp2112_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
......@@ -1041,6 +1059,166 @@ static void chmod_sysfs_attrs(struct hid_device *hdev)
}
}
static void cp2112_gpio_irq_ack(struct irq_data *d)
{
}
static void cp2112_gpio_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct cp2112_device *dev = gpiochip_get_data(gc);
__clear_bit(d->hwirq, &dev->irq_mask);
}
static void cp2112_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct cp2112_device *dev = gpiochip_get_data(gc);
__set_bit(d->hwirq, &dev->irq_mask);
}
static void cp2112_gpio_poll_callback(struct work_struct *work)
{
struct cp2112_device *dev = container_of(work, struct cp2112_device,
gpio_poll_worker.work);
struct irq_data *d;
u8 gpio_mask;
u8 virqs = (u8)dev->irq_mask;
u32 irq_type;
int irq, virq, ret;
ret = cp2112_gpio_get_all(&dev->gc);
if (ret == -ENODEV) /* the hardware has been disconnected */
return;
if (ret < 0)
goto exit;
gpio_mask = ret;
while (virqs) {
virq = ffs(virqs) - 1;
virqs &= ~BIT(virq);
if (!dev->gc.to_irq)
break;
irq = dev->gc.to_irq(&dev->gc, virq);
d = irq_get_irq_data(irq);
if (!d)
continue;
irq_type = irqd_get_trigger_type(d);
if (gpio_mask & BIT(virq)) {
/* Level High */
if (irq_type & IRQ_TYPE_LEVEL_HIGH)
handle_nested_irq(irq);
if ((irq_type & IRQ_TYPE_EDGE_RISING) &&
!(dev->gpio_prev_state & BIT(virq)))
handle_nested_irq(irq);
} else {
/* Level Low */
if (irq_type & IRQ_TYPE_LEVEL_LOW)
handle_nested_irq(irq);
if ((irq_type & IRQ_TYPE_EDGE_FALLING) &&
(dev->gpio_prev_state & BIT(virq)))
handle_nested_irq(irq);
}
}
dev->gpio_prev_state = gpio_mask;
exit:
if (dev->gpio_poll)
schedule_delayed_work(&dev->gpio_poll_worker, 10);
}
static unsigned int cp2112_gpio_irq_startup(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct cp2112_device *dev = gpiochip_get_data(gc);
INIT_DELAYED_WORK(&dev->gpio_poll_worker, cp2112_gpio_poll_callback);
cp2112_gpio_direction_input(gc, d->hwirq);
if (!dev->gpio_poll) {
dev->gpio_poll = true;
schedule_delayed_work(&dev->gpio_poll_worker, 0);
}
cp2112_gpio_irq_unmask(d);
return 0;
}
static void cp2112_gpio_irq_shutdown(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct cp2112_device *dev = gpiochip_get_data(gc);
cancel_delayed_work_sync(&dev->gpio_poll_worker);
}
static int cp2112_gpio_irq_type(struct irq_data *d, unsigned int type)
{
return 0;
}
static struct irq_chip cp2112_gpio_irqchip = {
.name = "cp2112-gpio",
.irq_startup = cp2112_gpio_irq_startup,
.irq_shutdown = cp2112_gpio_irq_shutdown,
.irq_ack = cp2112_gpio_irq_ack,
.irq_mask = cp2112_gpio_irq_mask,
.irq_unmask = cp2112_gpio_irq_unmask,
.irq_set_type = cp2112_gpio_irq_type,
};
static int __maybe_unused cp2112_allocate_irq(struct cp2112_device *dev,
int pin)
{
int ret;
if (dev->desc[pin])
return -EINVAL;
dev->desc[pin] = gpiochip_request_own_desc(&dev->gc, pin,
"HID/I2C:Event");
if (IS_ERR(dev->desc[pin])) {
dev_err(dev->gc.parent, "Failed to request GPIO\n");
return PTR_ERR(dev->desc[pin]);
}
ret = gpiochip_lock_as_irq(&dev->gc, pin);
if (ret) {
dev_err(dev->gc.parent, "Failed to lock GPIO as interrupt\n");
goto err_desc;
}
ret = gpiod_to_irq(dev->desc[pin]);
if (ret < 0) {
dev_err(dev->gc.parent, "Failed to translate GPIO to IRQ\n");
goto err_lock;
}
return ret;
err_lock:
gpiochip_unlock_as_irq(&dev->gc, pin);
err_desc:
gpiochip_free_own_desc(dev->desc[pin]);
dev->desc[pin] = NULL;
return ret;
}
static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct cp2112_device *dev;
......@@ -1163,8 +1341,17 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
chmod_sysfs_attrs(hdev);
hid_hw_power(hdev, PM_HINT_NORMAL);
ret = gpiochip_irqchip_add(&dev->gc, &cp2112_gpio_irqchip, 0,
handle_simple_irq, IRQ_TYPE_NONE);
if (ret) {
dev_err(dev->gc.parent, "failed to add IRQ chip\n");
goto err_sysfs_remove;
}
return ret;
err_sysfs_remove:
sysfs_remove_group(&hdev->dev.kobj, &cp2112_attr_group);
err_gpiochip_remove:
gpiochip_remove(&dev->gc);
err_free_i2c:
......@@ -1181,10 +1368,22 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
static void cp2112_remove(struct hid_device *hdev)
{
struct cp2112_device *dev = hid_get_drvdata(hdev);
int i;
sysfs_remove_group(&hdev->dev.kobj, &cp2112_attr_group);
gpiochip_remove(&dev->gc);
i2c_del_adapter(&dev->adap);
if (dev->gpio_poll) {
dev->gpio_poll = false;
cancel_delayed_work_sync(&dev->gpio_poll_worker);
}
for (i = 0; i < ARRAY_SIZE(dev->desc); i++) {
gpiochip_unlock_as_irq(&dev->gc, i);
gpiochip_free_own_desc(dev->desc[i]);
}
gpiochip_remove(&dev->gc);
/* i2c_del_adapter has finished removing all i2c devices from our
* adapter. Well behaved devices should no longer call our cp2112_xfer
* and should have waited for any pending calls to finish. It has also
......
......@@ -316,8 +316,10 @@
#define USB_VENDOR_ID_DMI 0x0c0b
#define USB_DEVICE_ID_DMI_ENC 0x5fab
#define USB_VENDOR_ID_DRAGONRISE 0x0079
#define USB_DEVICE_ID_DRAGONRISE_WIIU 0x1800
#define USB_VENDOR_ID_DRAGONRISE 0x0079
#define USB_DEVICE_ID_DRAGONRISE_WIIU 0x1800
#define USB_DEVICE_ID_DRAGONRISE_PS3 0x1801
#define USB_DEVICE_ID_DRAGONRISE_GAMECUBE 0x1843
#define USB_VENDOR_ID_DWAV 0x0eef
#define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER 0x0001
......@@ -719,8 +721,9 @@
#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3 0x07dc
#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2 0x07e2
#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP 0x07dd
#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4 0x07e4
#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2 0x07e8
#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP 0x07e9
#define USB_DEVICE_ID_MS_TYPE_COVER_3 0x07de
#define USB_DEVICE_ID_MS_POWER_COVER 0x07da
#define USB_VENDOR_ID_MOJO 0x8282
......@@ -904,6 +907,8 @@
#define USB_DEVICE_ID_SONY_PS3_BDREMOTE 0x0306
#define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268
#define USB_DEVICE_ID_SONY_PS4_CONTROLLER 0x05c4
#define USB_DEVICE_ID_SONY_PS4_CONTROLLER_2 0x09cc
#define USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE 0x0ba0
#define USB_DEVICE_ID_SONY_MOTION_CONTROLLER 0x03d5
#define USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER 0x042f
#define USB_DEVICE_ID_SONY_BUZZ_CONTROLLER 0x0002
......@@ -960,6 +965,9 @@
#define USB_VENDOR_ID_THINGM 0x27b8
#define USB_DEVICE_ID_BLINK1 0x01ed
#define USB_VENDOR_ID_THQ 0x20d6
#define USB_DEVICE_ID_THQ_PS3_UDRAW 0xcb17
#define USB_VENDOR_ID_THRUSTMASTER 0x044f
#define USB_VENDOR_ID_TIVO 0x150a
......@@ -1035,6 +1043,10 @@
#define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH 0x0500
#define USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET 0x0502
#define USB_VENDOR_ID_WEIDA 0x2575
#define USB_DEVICE_ID_WEIDA_8752 0xC300
#define USB_DEVICE_ID_WEIDA_8755 0xC301
#define USB_VENDOR_ID_WISEGROUP 0x0925
#define USB_DEVICE_ID_SMARTJOY_PLUS 0x0005
#define USB_DEVICE_ID_SUPER_JOY_BOX_3 0x8888
......
......@@ -253,6 +253,7 @@ __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
case ABS_RX:
case ABS_RY:
case ABS_RZ:
case ABS_WHEEL:
case ABS_TILT_X:
case ABS_TILT_Y:
if (field->unit == 0x14) { /* If degrees */
......@@ -1468,6 +1469,31 @@ static void hidinput_cleanup_hidinput(struct hid_device *hid,
kfree(hidinput);
}
static struct hid_input *hidinput_match(struct hid_report *report)
{
struct hid_device *hid = report->device;
struct hid_input *hidinput;
list_for_each_entry(hidinput, &hid->inputs, list) {
if (hidinput->report &&
hidinput->report->id == report->id)
return hidinput;
}
return NULL;
}
static inline void hidinput_configure_usages(struct hid_input *hidinput,
struct hid_report *report)
{
int i, j;
for (i = 0; i < report->maxfield; i++)
for (j = 0; j < report->field[i]->maxusage; j++)
hidinput_configure_usage(hidinput, report->field[i],
report->field[i]->usage + j);
}
/*
* Register the input device; print a message.
* Configure the input layer interface
......@@ -1478,8 +1504,8 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
{
struct hid_driver *drv = hid->driver;
struct hid_report *report;
struct hid_input *hidinput = NULL;
int i, j, k;
struct hid_input *next, *hidinput = NULL;
int i, k;
INIT_LIST_HEAD(&hid->inputs);
INIT_WORK(&hid->led_work, hidinput_led_worker);
......@@ -1509,43 +1535,40 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
if (!report->maxfield)
continue;
/*
* Find the previous hidinput report attached
* to this report id.
*/
if (hid->quirks & HID_QUIRK_MULTI_INPUT)
hidinput = hidinput_match(report);
if (!hidinput) {
hidinput = hidinput_allocate(hid);
if (!hidinput)
goto out_unwind;
}
for (i = 0; i < report->maxfield; i++)
for (j = 0; j < report->field[i]->maxusage; j++)
hidinput_configure_usage(hidinput, report->field[i],
report->field[i]->usage + j);
if ((hid->quirks & HID_QUIRK_NO_EMPTY_INPUT) &&
!hidinput_has_been_populated(hidinput))
continue;
hidinput_configure_usages(hidinput, report);
if (hid->quirks & HID_QUIRK_MULTI_INPUT) {
/* This will leave hidinput NULL, so that it
* allocates another one if we have more inputs on
* the same interface. Some devices (e.g. Happ's
* UGCI) cram a lot of unrelated inputs into the
* same interface. */
if (hid->quirks & HID_QUIRK_MULTI_INPUT)
hidinput->report = report;
if (drv->input_configured &&
drv->input_configured(hid, hidinput))
goto out_cleanup;
if (input_register_device(hidinput->input))
goto out_cleanup;
hidinput = NULL;
}
}
}
if (hidinput && (hid->quirks & HID_QUIRK_NO_EMPTY_INPUT) &&
!hidinput_has_been_populated(hidinput)) {
/* no need to register an input device not populated */
hidinput_cleanup_hidinput(hid, hidinput);
hidinput = NULL;
list_for_each_entry_safe(hidinput, next, &hid->inputs, list) {
if ((hid->quirks & HID_QUIRK_NO_EMPTY_INPUT) &&
!hidinput_has_been_populated(hidinput)) {
/* no need to register an input device not populated */
hidinput_cleanup_hidinput(hid, hidinput);
continue;
}
if (drv->input_configured &&
drv->input_configured(hid, hidinput))
goto out_unwind;
if (input_register_device(hidinput->input))
goto out_unwind;
hidinput->registered = true;
}
if (list_empty(&hid->inputs)) {
......@@ -1553,20 +1576,8 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
goto out_unwind;
}
if (hidinput) {
if (drv->input_configured &&
drv->input_configured(hid, hidinput))
goto out_cleanup;
if (input_register_device(hidinput->input))
goto out_cleanup;
}
return 0;
out_cleanup:
list_del(&hidinput->list);
input_free_device(hidinput->input);
kfree(hidinput);
out_unwind:
/* unwind the ones we already registered */
hidinput_disconnect(hid);
......@@ -1583,7 +1594,10 @@ void hidinput_disconnect(struct hid_device *hid)
list_for_each_entry_safe(hidinput, next, &hid->inputs, list) {
list_del(&hidinput->list);
input_unregister_device(hidinput->input);
if (hidinput->registered)
input_unregister_device(hidinput->input);
else
input_free_device(hidinput->input);
kfree(hidinput);
}
......
/*
* Force feedback support for Mayflash game controller adapters.
*
* These devices are manufactured by Mayflash but identify themselves
* using the vendor ID of DragonRise Inc.
*
* Tested with:
* 0079:1801 "DragonRise Inc. Mayflash PS3 Game Controller Adapter"
*
* The following adapters probably work too, but need to be tested:
* 0079:1800 "DragonRise Inc. Mayflash WIIU Game Controller Adapter"
* 0079:1843 "DragonRise Inc. Mayflash GameCube Game Controller Adapter"
*
* Copyright (c) 2016 Marcel Hasler <mahasler@gmail.com>
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
struct mf_device {
struct hid_report *report;
};
static int mf_play(struct input_dev *dev, void *data, struct ff_effect *effect)
{
struct hid_device *hid = input_get_drvdata(dev);
struct mf_device *mf = data;
int strong, weak;
strong = effect->u.rumble.strong_magnitude;
weak = effect->u.rumble.weak_magnitude;
dbg_hid("Called with 0x%04x 0x%04x.\n", strong, weak);
strong = strong * 0xff / 0xffff;
weak = weak * 0xff / 0xffff;
dbg_hid("Running with 0x%02x 0x%02x.\n", strong, weak);
mf->report->field[0]->value[0] = weak;
mf->report->field[0]->value[1] = strong;
hid_hw_request(hid, mf->report, HID_REQ_SET_REPORT);
return 0;
}
static int mf_init(struct hid_device *hid)
{
struct mf_device *mf;
struct list_head *report_list =
&hid->report_enum[HID_OUTPUT_REPORT].report_list;
struct list_head *report_ptr;
struct hid_report *report;
struct list_head *input_ptr = &hid->inputs;
struct hid_input *input;
struct input_dev *dev;
int error;
/* Setup each of the four inputs */
list_for_each(report_ptr, report_list) {
report = list_entry(report_ptr, struct hid_report, list);
if (report->maxfield < 1 || report->field[0]->report_count < 2) {
hid_err(hid, "Invalid report, this should never happen!\n");
return -ENODEV;
}
if (list_is_last(input_ptr, &hid->inputs)) {
hid_err(hid, "Missing input, this should never happen!\n");
return -ENODEV;
}
input_ptr = input_ptr->next;
input = list_entry(input_ptr, struct hid_input, list);
mf = kzalloc(sizeof(struct mf_device), GFP_KERNEL);
if (!mf)
return -ENOMEM;
dev = input->input;
set_bit(FF_RUMBLE, dev->ffbit);
error = input_ff_create_memless(dev, mf, mf_play);
if (error) {
kfree(mf);
return error;
}
mf->report = report;
mf->report->field[0]->value[0] = 0x00;
mf->report->field[0]->value[1] = 0x00;
hid_hw_request(hid, mf->report, HID_REQ_SET_REPORT);
}
hid_info(hid, "Force feedback for HJZ Mayflash game controller "
"adapters by Marcel Hasler <mahasler@gmail.com>\n");
return 0;
}
static int mf_probe(struct hid_device *hid, const struct hid_device_id *id)
{
int error;
dev_dbg(&hid->dev, "Mayflash HID hardware probe...\n");
/* Split device into four inputs */
hid->quirks |= HID_QUIRK_MULTI_INPUT;
error = hid_parse(hid);
if (error) {
hid_err(hid, "HID parse failed.\n");
return error;
}
error = hid_hw_start(hid, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
if (error) {
hid_err(hid, "HID hw start failed\n");
return error;
}
error = mf_init(hid);
if (error) {
hid_err(hid, "Force feedback init failed.\n");
hid_hw_stop(hid);
return error;
}
return 0;
}
static const struct hid_device_id mf_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3), },
{ }
};
MODULE_DEVICE_TABLE(hid, mf_devices);
static struct hid_driver mf_driver = {
.name = "hid_mf",
.id_table = mf_devices,
.probe = mf_probe,
};
module_hid_driver(mf_driver);
MODULE_LICENSE("GPL");
......@@ -280,9 +280,11 @@ static const struct hid_device_id ms_devices[] = {
.driver_data = MS_HIDINPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP),
.driver_data = MS_HIDINPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP),
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4),
.driver_data = MS_HIDINPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2),
.driver_data = MS_HIDINPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3),
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP),
.driver_data = MS_HIDINPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER),
.driver_data = MS_HIDINPUT },
......
......@@ -108,6 +108,7 @@ struct mt_device {
int cc_value_index; /* contact count value index in the field */
unsigned last_slot_field; /* the last field of a slot */
unsigned mt_report_id; /* the report ID of the multitouch device */
unsigned long initial_quirks; /* initial quirks state */
__s16 inputmode; /* InputMode HID feature, -1 if non-existent */
__s16 inputmode_index; /* InputMode HID feature index in the report */
__s16 maxcontact_report_id; /* Maximum Contact Number HID feature,
......@@ -318,13 +319,10 @@ static void mt_get_feature(struct hid_device *hdev, struct hid_report *report)
u8 *buf;
/*
* Only fetch the feature report if initial reports are not already
* been retrieved. Currently this is only done for Windows 8 touch
* devices.
* Do not fetch the feature report if the device has been explicitly
* marked as non-capable.
*/
if (!(hdev->quirks & HID_QUIRK_NO_INIT_REPORTS))
return;
if (td->mtclass.name != MT_CLS_WIN_8)
if (td->initial_quirks & HID_QUIRK_NO_INIT_REPORTS)
return;
buf = hid_alloc_report_buf(report, GFP_KERNEL);
......@@ -567,6 +565,14 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
case HID_UP_BUTTON:
code = BTN_MOUSE + ((usage->hid - 1) & HID_USAGE);
/*
* MS PTP spec says that external buttons left and right have
* usages 2 and 3.
*/
if (cls->name == MT_CLS_WIN_8 &&
field->application == HID_DG_TOUCHPAD &&
(usage->hid & HID_USAGE) > 1)
code--;
hid_map_usage(hi, usage, bit, max, EV_KEY, code);
input_set_capability(hi->input, EV_KEY, code);
return 1;
......@@ -842,7 +848,9 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
if (!td->mtclass.export_all_inputs &&
field->application != HID_DG_TOUCHSCREEN &&
field->application != HID_DG_PEN &&
field->application != HID_DG_TOUCHPAD)
field->application != HID_DG_TOUCHPAD &&
field->application != HID_GD_KEYBOARD &&
field->application != HID_CP_CONSUMER_CONTROL)
return -1;
/*
......@@ -1083,36 +1091,6 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
}
}
/* This allows the driver to correctly support devices
* that emit events over several HID messages.
*/
hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
/*
* This allows the driver to handle different input sensors
* that emits events through different reports on the same HID
* device.
*/
hdev->quirks |= HID_QUIRK_MULTI_INPUT;
hdev->quirks |= HID_QUIRK_NO_EMPTY_INPUT;
/*
* Handle special quirks for Windows 8 certified devices.
*/
if (id->group == HID_GROUP_MULTITOUCH_WIN_8)
/*
* Some multitouch screens do not like to be polled for input
* reports. Fortunately, the Win8 spec says that all touches
* should be sent during each report, making the initialization
* of input reports unnecessary.
*
* In addition some touchpads do not behave well if we read
* all feature reports from them. Instead we prevent
* initial report fetching and then selectively fetch each
* report we are interested in.
*/
hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
td = devm_kzalloc(&hdev->dev, sizeof(struct mt_device), GFP_KERNEL);
if (!td) {
dev_err(&hdev->dev, "cannot allocate multitouch data\n");
......@@ -1136,6 +1114,39 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (id->vendor == HID_ANY_ID && id->product == HID_ANY_ID)
td->serial_maybe = true;
/*
* Store the initial quirk state
*/
td->initial_quirks = hdev->quirks;
/* This allows the driver to correctly support devices
* that emit events over several HID messages.
*/
hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
/*
* This allows the driver to handle different input sensors
* that emits events through different reports on the same HID
* device.
*/
hdev->quirks |= HID_QUIRK_MULTI_INPUT;
hdev->quirks |= HID_QUIRK_NO_EMPTY_INPUT;
/*
* Some multitouch screens do not like to be polled for input
* reports. Fortunately, the Win8 spec says that all touches
* should be sent during each report, making the initialization
* of input reports unnecessary. For Win7 devices, well, let's hope
* they will still be happy (this is only be a problem if a touch
* was already there while probing the device).
*
* In addition some touchpads do not behave well if we read
* all feature reports from them. Instead we prevent
* initial report fetching and then selectively fetch each
* report we are interested in.
*/
hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
ret = hid_parse(hdev);
if (ret != 0)
return ret;
......@@ -1204,8 +1215,11 @@ static int mt_resume(struct hid_device *hdev)
static void mt_remove(struct hid_device *hdev)
{
struct mt_device *td = hid_get_drvdata(hdev);
sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group);
hid_hw_stop(hdev);
hdev->quirks = td->initial_quirks;
}
/*
......
......@@ -795,6 +795,12 @@ static const struct hid_device_id sensor_hub_devices[] = {
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_MICROSOFT,
USB_DEVICE_ID_MS_TYPE_COVER_2),
.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_MICROSOFT,
0x07bd), /* Microsoft Surface 3 */
.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_MICROCHIP,
0x0f01), /* MM7150 */
.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_STM_0,
USB_DEVICE_ID_STM_HID_SENSOR),
.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
......
This diff is collapsed.
This diff is collapsed.
......@@ -22,6 +22,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pm.h>
......@@ -37,10 +38,15 @@
#include <linux/mutex.h>
#include <linux/acpi.h>
#include <linux/of.h>
#include <linux/gpio/consumer.h>
#include <linux/regulator/consumer.h>
#include <linux/i2c/i2c-hid.h>
#include "../hid-ids.h"
/* quirks to control the device */
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
/* flags */
#define I2C_HID_STARTED 0
#define I2C_HID_RESET_PENDING 1
......@@ -143,10 +149,9 @@ struct i2c_hid {
char *argsbuf; /* Command arguments buffer */
unsigned long flags; /* device flags */
unsigned long quirks; /* Various quirks */
wait_queue_head_t wait; /* For waiting the interrupt */
struct gpio_desc *desc;
int irq;
struct i2c_hid_platform_data pdata;
......@@ -154,6 +159,39 @@ struct i2c_hid {
struct mutex reset_lock;
};
static const struct i2c_hid_quirks {
__u16 idVendor;
__u16 idProduct;
__u32 quirks;
} i2c_hid_quirks[] = {
{ USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8752,
I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
{ USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8755,
I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
{ 0, 0 }
};
/*
* i2c_hid_lookup_quirk: return any quirks associated with a I2C HID device
* @idVendor: the 16-bit vendor ID
* @idProduct: the 16-bit product ID
*
* Returns: a u32 quirks value.
*/
static u32 i2c_hid_lookup_quirk(const u16 idVendor, const u16 idProduct)
{
u32 quirks = 0;
int n;
for (n = 0; i2c_hid_quirks[n].idVendor; n++)
if (i2c_hid_quirks[n].idVendor == idVendor &&
(i2c_hid_quirks[n].idProduct == (__u16)HID_ANY_ID ||
i2c_hid_quirks[n].idProduct == idProduct))
quirks = i2c_hid_quirks[n].quirks;
return quirks;
}
static int __i2c_hid_command(struct i2c_client *client,
const struct i2c_hid_cmd *command, u8 reportID,
u8 reportType, u8 *args, int args_len,
......@@ -346,11 +384,27 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
i2c_hid_dbg(ihid, "%s\n", __func__);
/*
* Some devices require to send a command to wakeup before power on.
* The call will get a return value (EREMOTEIO) but device will be
* triggered and activated. After that, it goes like a normal device.
*/
if (power_state == I2C_HID_PWR_ON &&
ihid->quirks & I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV) {
ret = i2c_hid_command(client, &hid_set_power_cmd, NULL, 0);
/* Device was already activated */
if (!ret)
goto set_pwr_exit;
}
ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
0, NULL, 0, NULL, 0);
if (ret)
dev_err(&client->dev, "failed to change power setting.\n");
set_pwr_exit:
return ret;
}
......@@ -716,9 +770,11 @@ static int i2c_hid_start(struct hid_device *hid)
i2c_hid_find_max_report(hid, HID_FEATURE_REPORT, &bufsize);
if (bufsize > ihid->bufsize) {
disable_irq(client->irq);
i2c_hid_free_buffers(ihid);
ret = i2c_hid_alloc_buffers(ihid, bufsize);
enable_irq(client->irq);
if (ret)
return ret;
......@@ -806,18 +862,21 @@ static struct hid_ll_driver i2c_hid_ll_driver = {
static int i2c_hid_init_irq(struct i2c_client *client)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
unsigned long irqflags = 0;
int ret;
dev_dbg(&client->dev, "Requesting IRQ: %d\n", ihid->irq);
dev_dbg(&client->dev, "Requesting IRQ: %d\n", client->irq);
ret = request_threaded_irq(ihid->irq, NULL, i2c_hid_irq,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
client->name, ihid);
if (!irq_get_trigger_type(client->irq))
irqflags = IRQF_TRIGGER_LOW;
ret = request_threaded_irq(client->irq, NULL, i2c_hid_irq,
irqflags | IRQF_ONESHOT, client->name, ihid);
if (ret < 0) {
dev_warn(&client->dev,
"Could not register for %s interrupt, irq = %d,"
" ret = %d\n",
client->name, ihid->irq, ret);
client->name, client->irq, ret);
return ret;
}
......@@ -864,14 +923,6 @@ static int i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid)
}
#ifdef CONFIG_ACPI
/* Default GPIO mapping */
static const struct acpi_gpio_params i2c_hid_irq_gpio = { 0, 0, true };
static const struct acpi_gpio_mapping i2c_hid_acpi_gpios[] = {
{ "gpios", &i2c_hid_irq_gpio, 1 },
{ },
};
static int i2c_hid_acpi_pdata(struct i2c_client *client,
struct i2c_hid_platform_data *pdata)
{
......@@ -882,7 +933,6 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client,
union acpi_object *obj;
struct acpi_device *adev;
acpi_handle handle;
int ret;
handle = ACPI_HANDLE(&client->dev);
if (!handle || acpi_bus_get_device(handle, &adev))
......@@ -898,9 +948,7 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client,
pdata->hid_descriptor_address = obj->integer.value;
ACPI_FREE(obj);
/* GPIOs are optional */
ret = acpi_dev_add_driver_gpios(adev, i2c_hid_acpi_gpios);
return ret < 0 && ret != -ENXIO ? ret : 0;
return 0;
}
static const struct acpi_device_id i2c_hid_acpi_match[] = {
......@@ -964,6 +1012,19 @@ static int i2c_hid_probe(struct i2c_client *client,
dbg_hid("HID probe called for i2c 0x%02x\n", client->addr);
if (!client->irq) {
dev_err(&client->dev,
"HID over i2c has not been provided an Int IRQ\n");
return -EINVAL;
}
if (client->irq < 0) {
if (client->irq != -EPROBE_DEFER)
dev_err(&client->dev,
"HID over i2c doesn't have a valid IRQ\n");
return client->irq;
}
ihid = kzalloc(sizeof(struct i2c_hid), GFP_KERNEL);
if (!ihid)
return -ENOMEM;
......@@ -983,23 +1044,6 @@ static int i2c_hid_probe(struct i2c_client *client,
ihid->pdata = *platform_data;
}
if (client->irq > 0) {
ihid->irq = client->irq;
} else if (ACPI_COMPANION(&client->dev)) {
ihid->desc = gpiod_get(&client->dev, NULL, GPIOD_IN);
if (IS_ERR(ihid->desc)) {
dev_err(&client->dev, "Failed to get GPIO interrupt\n");
return PTR_ERR(ihid->desc);
}
ihid->irq = gpiod_to_irq(ihid->desc);
if (ihid->irq < 0) {
gpiod_put(ihid->desc);
dev_err(&client->dev, "Failed to convert GPIO to IRQ\n");
return ihid->irq;
}
}
i2c_set_clientdata(client, ihid);
ihid->client = client;
......@@ -1050,6 +1094,8 @@ static int i2c_hid_probe(struct i2c_client *client,
client->name, hid->vendor, hid->product);
strlcpy(hid->phys, dev_name(&client->dev), sizeof(hid->phys));
ihid->quirks = i2c_hid_lookup_quirk(hid->vendor, hid->product);
ret = hid_add_device(hid);
if (ret) {
if (ret != -ENODEV)
......@@ -1064,16 +1110,13 @@ static int i2c_hid_probe(struct i2c_client *client,
hid_destroy_device(hid);
err_irq:
free_irq(ihid->irq, ihid);
free_irq(client->irq, ihid);
err_pm:
pm_runtime_put_noidle(&client->dev);
pm_runtime_disable(&client->dev);
err:
if (ihid->desc)
gpiod_put(ihid->desc);
i2c_hid_free_buffers(ihid);
kfree(ihid);
return ret;
......@@ -1092,18 +1135,13 @@ static int i2c_hid_remove(struct i2c_client *client)
hid = ihid->hid;
hid_destroy_device(hid);
free_irq(ihid->irq, ihid);
free_irq(client->irq, ihid);
if (ihid->bufsize)
i2c_hid_free_buffers(ihid);
if (ihid->desc)
gpiod_put(ihid->desc);
kfree(ihid);
acpi_dev_remove_driver_gpios(ACPI_COMPANION(&client->dev));
return 0;
}
......@@ -1142,11 +1180,11 @@ static int i2c_hid_suspend(struct device *dev)
/* Save some power */
i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
disable_irq(ihid->irq);
disable_irq(client->irq);
}
if (device_may_wakeup(&client->dev)) {
wake_status = enable_irq_wake(ihid->irq);
wake_status = enable_irq_wake(client->irq);
if (!wake_status)
ihid->irq_wake_enabled = true;
else
......@@ -1166,7 +1204,7 @@ static int i2c_hid_resume(struct device *dev)
int wake_status;
if (device_may_wakeup(&client->dev) && ihid->irq_wake_enabled) {
wake_status = disable_irq_wake(ihid->irq);
wake_status = disable_irq_wake(client->irq);
if (!wake_status)
ihid->irq_wake_enabled = false;
else
......@@ -1179,7 +1217,7 @@ static int i2c_hid_resume(struct device *dev)
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
enable_irq(ihid->irq);
enable_irq(client->irq);
ret = i2c_hid_hwreset(client);
if (ret)
return ret;
......@@ -1197,19 +1235,17 @@ static int i2c_hid_resume(struct device *dev)
static int i2c_hid_runtime_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct i2c_hid *ihid = i2c_get_clientdata(client);
i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
disable_irq(ihid->irq);
disable_irq(client->irq);
return 0;
}
static int i2c_hid_runtime_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct i2c_hid *ihid = i2c_get_clientdata(client);
enable_irq(ihid->irq);
enable_irq(client->irq);
i2c_hid_set_power(client, I2C_HID_PWR_ON);
return 0;
}
......
......@@ -19,7 +19,6 @@
#include <linux/jiffies.h>
#include "client.h"
#include "hw-ish.h"
#include "utils.h"
#include "hbm.h"
/* For FW reset flow */
......@@ -310,6 +309,7 @@ static int write_ipc_from_queue(struct ishtp_device *dev)
((uint32_t)tv_utc.tv_usec);
ts_format.ts1_source = HOST_SYSTEM_TIME_USEC;
ts_format.ts2_source = HOST_UTC_TIME_USEC;
ts_format.reserved = 0;
time_update.primary_host_time = usec_system;
time_update.secondary_host_time = usec_utc;
......@@ -427,6 +427,59 @@ static int ipc_send_mng_msg(struct ishtp_device *dev, uint32_t msg_code,
sizeof(uint32_t) + size);
}
#define WAIT_FOR_FW_RDY 0x1
#define WAIT_FOR_INPUT_RDY 0x2
/**
* timed_wait_for_timeout() - wait special event with timeout
* @dev: ISHTP device pointer
* @condition: indicate the condition for waiting
* @timeinc: time slice for every wait cycle, in ms
* @timeout: time in ms for timeout
*
* This function will check special event to be ready in a loop, the loop
* period is specificd in timeinc. Wait timeout will causes failure.
*
* Return: 0 for success else failure code
*/
static int timed_wait_for_timeout(struct ishtp_device *dev, int condition,
unsigned int timeinc, unsigned int timeout)
{
bool complete = false;
int ret;
do {
if (condition == WAIT_FOR_FW_RDY) {
complete = ishtp_fw_is_ready(dev);
} else if (condition == WAIT_FOR_INPUT_RDY) {
complete = ish_is_input_ready(dev);
} else {
ret = -EINVAL;
goto out;
}
if (!complete) {
unsigned long left_time;
left_time = msleep_interruptible(timeinc);
timeout -= (timeinc - left_time);
}
} while (!complete && timeout > 0);
if (complete)
ret = 0;
else
ret = -EBUSY;
out:
return ret;
}
#define TIME_SLICE_FOR_FW_RDY_MS 100
#define TIME_SLICE_FOR_INPUT_RDY_MS 100
#define TIMEOUT_FOR_FW_RDY_MS 2000
#define TIMEOUT_FOR_INPUT_RDY_MS 2000
/**
* ish_fw_reset_handler() - FW reset handler
* @dev: ishtp device pointer
......@@ -456,8 +509,8 @@ static int ish_fw_reset_handler(struct ishtp_device *dev)
ishtp_reset_handler(dev);
if (!ish_is_input_ready(dev))
timed_wait_for_timeout(WAIT_FOR_SEND_SLICE,
ish_is_input_ready(dev), (2 * HZ));
timed_wait_for_timeout(dev, WAIT_FOR_INPUT_RDY,
TIME_SLICE_FOR_INPUT_RDY_MS, TIMEOUT_FOR_INPUT_RDY_MS);
/* ISH FW is dead */
if (!ish_is_input_ready(dev))
......@@ -472,8 +525,8 @@ static int ish_fw_reset_handler(struct ishtp_device *dev)
sizeof(uint32_t));
/* Wait for ISH FW'es ILUP and ISHTP_READY */
timed_wait_for_timeout(WAIT_FOR_SEND_SLICE, ishtp_fw_is_ready(dev),
(2 * HZ));
timed_wait_for_timeout(dev, WAIT_FOR_FW_RDY,
TIME_SLICE_FOR_FW_RDY_MS, TIMEOUT_FOR_FW_RDY_MS);
if (!ishtp_fw_is_ready(dev)) {
/* ISH FW is dead */
uint32_t ish_status;
......@@ -487,6 +540,8 @@ static int ish_fw_reset_handler(struct ishtp_device *dev)
return 0;
}
#define TIMEOUT_FOR_HW_RDY_MS 300
/**
* ish_fw_reset_work_fn() - FW reset worker function
* @unused: not used
......@@ -500,7 +555,7 @@ static void fw_reset_work_fn(struct work_struct *unused)
rv = ish_fw_reset_handler(ishtp_dev);
if (!rv) {
/* ISH is ILUP & ISHTP-ready. Restart ISHTP */
schedule_timeout(HZ / 3);
msleep_interruptible(TIMEOUT_FOR_HW_RDY_MS);
ishtp_dev->recvd_hw_ready = 1;
wake_up_interruptible(&ishtp_dev->wait_hw_ready);
......
/*
* Utility macros of ISH
*
* Copyright (c) 2014-2016, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#ifndef UTILS__H
#define UTILS__H
#define WAIT_FOR_SEND_SLICE (HZ / 10)
#define WAIT_FOR_CONNECT_SLICE (HZ / 10)
/*
* Waits for specified event when a thread that triggers event can't signal
* Also, waits *at_least* `timeinc` after condition is satisfied
*/
#define timed_wait_for(timeinc, condition) \
do { \
int completed = 0; \
do { \
unsigned long j; \
int done = 0; \
\
completed = (condition); \
for (j = jiffies, done = 0; !done; ) { \
schedule_timeout(timeinc); \
if (time_is_before_eq_jiffies(j + timeinc)) \
done = 1; \
} \
} while (!(completed)); \
} while (0)
/*
* Waits for specified event when a thread that triggers event
* can't signal with timeout (use whenever we may hang)
*/
#define timed_wait_for_timeout(timeinc, condition, timeout) \
do { \
int t = timeout; \
do { \
unsigned long j; \
int done = 0; \
\
for (j = jiffies, done = 0; !done; ) { \
schedule_timeout(timeinc); \
if (time_is_before_eq_jiffies(j + timeinc)) \
done = 1; \
} \
t -= timeinc; \
if (t <= 0) \
break; \
} while (!(condition)); \
} while (0)
#endif /* UTILS__H */
......@@ -585,14 +585,7 @@ int ishtp_bus_new_client(struct ishtp_device *dev)
*/
i = dev->fw_client_presentation_num - 1;
device_uuid = dev->fw_clients[i].props.protocol_name;
dev_name = kasprintf(GFP_KERNEL,
"{%02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X}",
device_uuid.b[3], device_uuid.b[2], device_uuid.b[1],
device_uuid.b[0], device_uuid.b[5], device_uuid.b[4],
device_uuid.b[7], device_uuid.b[6], device_uuid.b[8],
device_uuid.b[9], device_uuid.b[10], device_uuid.b[11],
device_uuid.b[12], device_uuid.b[13], device_uuid.b[14],
device_uuid.b[15]);
dev_name = kasprintf(GFP_KERNEL, "{%pUL}", device_uuid.b);
if (!dev_name)
return -ENOMEM;
......
......@@ -378,11 +378,10 @@ static void ishtp_hbm_cl_disconnect_res(struct ishtp_device *dev,
list_for_each_entry(cl, &dev->cl_list, link) {
if (!rs->status && ishtp_hbm_cl_addr_equal(cl, rs)) {
cl->state = ISHTP_CL_DISCONNECTED;
wake_up_interruptible(&cl->wait_ctrl_res);
break;
}
}
if (cl)
wake_up_interruptible(&cl->wait_ctrl_res);
spin_unlock_irqrestore(&dev->cl_list_lock, flags);
}
......@@ -431,11 +430,10 @@ static void ishtp_hbm_cl_connect_res(struct ishtp_device *dev,
cl->state = ISHTP_CL_DISCONNECTED;
cl->status = -ENODEV;
}
wake_up_interruptible(&cl->wait_ctrl_res);
break;
}
}
if (cl)
wake_up_interruptible(&cl->wait_ctrl_res);
spin_unlock_irqrestore(&dev->cl_list_lock, flags);
}
......
......@@ -1459,7 +1459,7 @@ static int hid_post_reset(struct usb_interface *intf)
rdesc = kmalloc(hid->dev_rsize, GFP_KERNEL);
if (!rdesc) {
dbg_hid("couldn't allocate rdesc memory (post_reset)\n");
return 1;
return -ENOMEM;
}
status = hid_get_class_descriptor(dev,
interface->desc.bInterfaceNumber,
......@@ -1467,13 +1467,13 @@ static int hid_post_reset(struct usb_interface *intf)
if (status < 0) {
dbg_hid("reading report descriptor failed (post_reset)\n");
kfree(rdesc);
return 1;
return status;
}
status = memcmp(rdesc, hid->dev_rdesc, hid->dev_rsize);
kfree(rdesc);
if (status != 0) {
dbg_hid("report descriptor changed\n");
return 1;
return -EPERM;
}
/* No need to do another reset or clear a halted endpoint */
......
......@@ -82,6 +82,8 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVE_SB_OMNI_SURROUND_51, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_WIIU, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_ELAN, HID_ANY_ID, HID_QUIRK_ALWAYS_POLL },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
......@@ -101,8 +103,9 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_NEXIO, USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750, HID_QUIRK_NO_INIT_REPORTS },
......
......@@ -210,7 +210,7 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac);
void wacom_wac_usage_mapping(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage);
int wacom_wac_event(struct hid_device *hdev, struct hid_field *field,
void wacom_wac_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value);
void wacom_wac_report(struct hid_device *hdev, struct hid_report *report);
void wacom_battery_work(struct work_struct *work);
......
......@@ -122,6 +122,7 @@ static void wacom_feature_mapping(struct hid_device *hdev,
struct hid_data *hid_data = &wacom->wacom_wac.hid_data;
u8 *data;
int ret;
int n;
switch (usage->hid) {
case HID_DG_CONTACTMAX:
......@@ -159,22 +160,48 @@ static void wacom_feature_mapping(struct hid_device *hdev,
case HID_UP_DIGITIZER:
if (field->report->id == 0x0B &&
(field->application == WACOM_G9_DIGITIZER ||
field->application == WACOM_G11_DIGITIZER)) {
(field->application == WACOM_HID_G9_PEN ||
field->application == WACOM_HID_G11_PEN)) {
wacom->wacom_wac.mode_report = field->report->id;
wacom->wacom_wac.mode_value = 0;
}
break;
case WACOM_G9_PAGE:
case WACOM_G11_PAGE:
case WACOM_HID_WD_DATAMODE:
wacom->wacom_wac.mode_report = field->report->id;
wacom->wacom_wac.mode_value = 2;
break;
case WACOM_HID_UP_G9:
case WACOM_HID_UP_G11:
if (field->report->id == 0x03 &&
(field->application == WACOM_G9_TOUCHSCREEN ||
field->application == WACOM_G11_TOUCHSCREEN)) {
(field->application == WACOM_HID_G9_TOUCHSCREEN ||
field->application == WACOM_HID_G11_TOUCHSCREEN)) {
wacom->wacom_wac.mode_report = field->report->id;
wacom->wacom_wac.mode_value = 0;
}
break;
case WACOM_HID_WD_OFFSETLEFT:
case WACOM_HID_WD_OFFSETTOP:
case WACOM_HID_WD_OFFSETRIGHT:
case WACOM_HID_WD_OFFSETBOTTOM:
/* read manually */
n = hid_report_len(field->report);
data = hid_alloc_report_buf(field->report, GFP_KERNEL);
if (!data)
break;
data[0] = field->report->id;
ret = wacom_get_report(hdev, HID_FEATURE_REPORT,
data, n, WAC_CMD_RETRIES);
if (ret == n) {
ret = hid_report_raw_event(hdev, HID_FEATURE_REPORT,
data, n, 0);
} else {
hid_warn(hdev, "%s: could not retrieve sensor offsets\n",
__func__);
}
kfree(data);
break;
}
}
......@@ -240,6 +267,30 @@ static void wacom_usage_mapping(struct hid_device *hdev,
features->touch_max = 1;
}
/*
* ISDv4 devices which predate HID's adoption of the
* HID_DG_BARELSWITCH2 usage use 0x000D0000 in its
* position instead. We can accurately detect if a
* usage with that value should be HID_DG_BARRELSWITCH2
* based on the surrounding usages, which have remained
* constant across generations.
*/
if (features->type == HID_GENERIC &&
usage->hid == 0x000D0000 &&
field->application == HID_DG_PEN &&
field->physical == HID_DG_STYLUS) {
int i = usage->usage_index;
if (i-4 >= 0 && i+1 < field->maxusage &&
field->usage[i-4].hid == HID_DG_TIPSWITCH &&
field->usage[i-3].hid == HID_DG_BARRELSWITCH &&
field->usage[i-2].hid == HID_DG_ERASER &&
field->usage[i-1].hid == HID_DG_INVERT &&
field->usage[i+1].hid == HID_DG_INRANGE) {
usage->hid = HID_DG_BARRELSWITCH2;
}
}
switch (usage->hid) {
case HID_GD_X:
features->x_max = field->logical_maximum;
......@@ -689,11 +740,6 @@ static int wacom_add_shared_data(struct hid_device *hdev)
return retval;
}
if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH)
wacom_wac->shared->touch = hdev;
else if (wacom_wac->features.device_type & WACOM_DEVICETYPE_PEN)
wacom_wac->shared->pen = hdev;
out:
mutex_unlock(&wacom_udev_list_lock);
return retval;
......@@ -1916,6 +1962,19 @@ static void wacom_update_name(struct wacom *wacom, const char *suffix)
/* shift everything including the terminator */
memmove(gap, gap+1, strlen(gap));
}
/* strip off excessive prefixing */
if (strstr(name, "Wacom Co.,Ltd. Wacom ") == name) {
int n = strlen(name);
int x = strlen("Wacom Co.,Ltd. ");
memmove(name, name+x, n-x+1);
}
if (strstr(name, "Wacom Co., Ltd. Wacom ") == name) {
int n = strlen(name);
int x = strlen("Wacom Co., Ltd. ");
memmove(name, name+x, n-x+1);
}
/* get rid of trailing whitespace */
if (name[strlen(name)-1] == ' ')
name[strlen(name)-1] = '\0';
......@@ -1977,6 +2036,10 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
if (error)
goto fail;
error = wacom_add_shared_data(hdev);
if (error)
goto fail;
/*
* Bamboo Pad has a generic hid handling for the Pen, and we switch it
* into debug mode for the touch part.
......@@ -2017,9 +2080,10 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
wacom_update_name(wacom, wireless ? " (WL)" : "");
error = wacom_add_shared_data(hdev);
if (error)
goto fail;
if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH)
wacom_wac->shared->touch = hdev;
else if (wacom_wac->features.device_type & WACOM_DEVICETYPE_PEN)
wacom_wac->shared->pen = hdev;
if (!(features->device_type & WACOM_DEVICETYPE_WL_MONITOR) &&
(features->quirks & WACOM_QUIRK_BATTERY)) {
......
This diff is collapsed.
......@@ -74,6 +74,7 @@
/* device quirks */
#define WACOM_QUIRK_BBTOUCH_LOWRES 0x0001
#define WACOM_QUIRK_SENSE 0x0002
#define WACOM_QUIRK_BATTERY 0x0008
/* device types */
......@@ -84,23 +85,66 @@
#define WACOM_DEVICETYPE_WL_MONITOR 0x0008
#define WACOM_DEVICETYPE_DIRECT 0x0010
#define WACOM_VENDORDEFINED_PEN 0xff0d0001
#define WACOM_G9_PAGE 0xff090000
#define WACOM_G9_DIGITIZER (WACOM_G9_PAGE | 0x02)
#define WACOM_G9_TOUCHSCREEN (WACOM_G9_PAGE | 0x11)
#define WACOM_G11_PAGE 0xff110000
#define WACOM_G11_DIGITIZER (WACOM_G11_PAGE | 0x02)
#define WACOM_G11_TOUCHSCREEN (WACOM_G11_PAGE | 0x11)
#define WACOM_HID_UP_WACOMDIGITIZER 0xff0d0000
#define WACOM_HID_SP_PAD 0x00040000
#define WACOM_HID_SP_BUTTON 0x00090000
#define WACOM_HID_SP_DIGITIZER 0x000d0000
#define WACOM_HID_SP_DIGITIZERINFO 0x00100000
#define WACOM_HID_WD_DIGITIZER (WACOM_HID_UP_WACOMDIGITIZER | 0x01)
#define WACOM_HID_WD_SENSE (WACOM_HID_UP_WACOMDIGITIZER | 0x36)
#define WACOM_HID_WD_DIGITIZERFNKEYS (WACOM_HID_UP_WACOMDIGITIZER | 0x39)
#define WACOM_HID_WD_SERIALHI (WACOM_HID_UP_WACOMDIGITIZER | 0x5c)
#define WACOM_HID_WD_TOOLTYPE (WACOM_HID_UP_WACOMDIGITIZER | 0x77)
#define WACOM_HID_WD_DISTANCE (WACOM_HID_UP_WACOMDIGITIZER | 0x0132)
#define WACOM_HID_WD_TOUCHSTRIP (WACOM_HID_UP_WACOMDIGITIZER | 0x0136)
#define WACOM_HID_WD_TOUCHSTRIP2 (WACOM_HID_UP_WACOMDIGITIZER | 0x0137)
#define WACOM_HID_WD_TOUCHRING (WACOM_HID_UP_WACOMDIGITIZER | 0x0138)
#define WACOM_HID_WD_TOUCHRINGSTATUS (WACOM_HID_UP_WACOMDIGITIZER | 0x0139)
#define WACOM_HID_WD_ACCELEROMETER_X (WACOM_HID_UP_WACOMDIGITIZER | 0x0401)
#define WACOM_HID_WD_ACCELEROMETER_Y (WACOM_HID_UP_WACOMDIGITIZER | 0x0402)
#define WACOM_HID_WD_ACCELEROMETER_Z (WACOM_HID_UP_WACOMDIGITIZER | 0x0403)
#define WACOM_HID_WD_BATTERY_CHARGING (WACOM_HID_UP_WACOMDIGITIZER | 0x0404)
#define WACOM_HID_WD_BATTERY_LEVEL (WACOM_HID_UP_WACOMDIGITIZER | 0x043b)
#define WACOM_HID_WD_EXPRESSKEY00 (WACOM_HID_UP_WACOMDIGITIZER | 0x0910)
#define WACOM_HID_WD_EXPRESSKEYCAP00 (WACOM_HID_UP_WACOMDIGITIZER | 0x0950)
#define WACOM_HID_WD_BUTTONHOME (WACOM_HID_UP_WACOMDIGITIZER | 0x0990)
#define WACOM_HID_WD_BUTTONUP (WACOM_HID_UP_WACOMDIGITIZER | 0x0991)
#define WACOM_HID_WD_BUTTONDOWN (WACOM_HID_UP_WACOMDIGITIZER | 0x0992)
#define WACOM_HID_WD_BUTTONLEFT (WACOM_HID_UP_WACOMDIGITIZER | 0x0993)
#define WACOM_HID_WD_BUTTONRIGHT (WACOM_HID_UP_WACOMDIGITIZER | 0x0994)
#define WACOM_HID_WD_BUTTONCENTER (WACOM_HID_UP_WACOMDIGITIZER | 0x0995)
#define WACOM_HID_WD_TOUCHONOFF (WACOM_HID_UP_WACOMDIGITIZER | 0x0996)
#define WACOM_HID_WD_FINGERWHEEL (WACOM_HID_UP_WACOMDIGITIZER | 0x0d03)
#define WACOM_HID_WD_OFFSETLEFT (WACOM_HID_UP_WACOMDIGITIZER | 0x0d30)
#define WACOM_HID_WD_OFFSETTOP (WACOM_HID_UP_WACOMDIGITIZER | 0x0d31)
#define WACOM_HID_WD_OFFSETRIGHT (WACOM_HID_UP_WACOMDIGITIZER | 0x0d32)
#define WACOM_HID_WD_OFFSETBOTTOM (WACOM_HID_UP_WACOMDIGITIZER | 0x0d33)
#define WACOM_HID_WD_DATAMODE (WACOM_HID_UP_WACOMDIGITIZER | 0x1002)
#define WACOM_HID_WD_DIGITIZERINFO (WACOM_HID_UP_WACOMDIGITIZER | 0x1013)
#define WACOM_HID_UP_G9 0xff090000
#define WACOM_HID_G9_PEN (WACOM_HID_UP_G9 | 0x02)
#define WACOM_HID_G9_TOUCHSCREEN (WACOM_HID_UP_G9 | 0x11)
#define WACOM_HID_UP_G11 0xff110000
#define WACOM_HID_G11_PEN (WACOM_HID_UP_G11 | 0x02)
#define WACOM_HID_G11_TOUCHSCREEN (WACOM_HID_UP_G11 | 0x11)
#define WACOM_PAD_FIELD(f) (((f)->physical == HID_DG_TABLETFUNCTIONKEY) || \
((f)->physical == WACOM_HID_WD_DIGITIZERFNKEYS) || \
((f)->physical == WACOM_HID_WD_DIGITIZERINFO))
#define WACOM_PEN_FIELD(f) (((f)->logical == HID_DG_STYLUS) || \
((f)->physical == HID_DG_STYLUS) || \
((f)->physical == HID_DG_PEN) || \
((f)->application == HID_DG_PEN) || \
((f)->application == HID_DG_DIGITIZER) || \
((f)->application == WACOM_VENDORDEFINED_PEN))
((f)->application == WACOM_HID_WD_DIGITIZER) || \
((f)->application == WACOM_HID_G9_PEN) || \
((f)->application == WACOM_HID_G11_PEN))
#define WACOM_FINGER_FIELD(f) (((f)->logical == HID_DG_FINGER) || \
((f)->physical == HID_DG_FINGER) || \
((f)->application == HID_DG_TOUCHSCREEN))
((f)->application == HID_DG_TOUCHSCREEN) || \
((f)->application == WACOM_HID_G9_TOUCHSCREEN) || \
((f)->application == WACOM_HID_G11_TOUCHSCREEN))
enum {
PENPARTNER = 0,
......@@ -167,8 +211,10 @@ struct wacom_features {
int x_resolution;
int y_resolution;
int numbered_buttons;
int x_min;
int y_min;
int offset_left;
int offset_right;
int offset_top;
int offset_bottom;
int device_type;
int x_phy;
int y_phy;
......@@ -186,6 +232,7 @@ struct wacom_features {
int pktlen;
bool check_for_hid_type;
int hid_type;
bool input_event_flag;
};
struct wacom_shared {
......@@ -202,6 +249,7 @@ struct wacom_shared {
struct hid_data {
__s16 inputmode; /* InputMode HID feature, -1 if non-existent */
__s16 inputmode_index; /* InputMode HID feature index in the report */
bool sense_state;
bool inrange_state;
bool invert_state;
bool tipswitch;
......@@ -217,6 +265,10 @@ struct hid_data {
int last_slot_field;
int num_expected;
int num_received;
int battery_capacity;
int bat_charging;
int bat_connected;
int ps_connected;
};
struct wacom_remote_data {
......@@ -234,7 +286,7 @@ struct wacom_wac {
unsigned char data[WACOM_PKGLEN_MAX];
int tool[2];
int id[2];
__u32 serial[2];
__u64 serial[2];
bool reporting_data;
struct wacom_features features;
struct wacom_shared *shared;
......
......@@ -231,7 +231,11 @@ struct hid_item {
#define HID_DG_TAP 0x000d0035
#define HID_DG_TABLETFUNCTIONKEY 0x000d0039
#define HID_DG_PROGRAMCHANGEKEY 0x000d003a
#define HID_DG_BATTERYSTRENGTH 0x000d003b
#define HID_DG_INVERT 0x000d003c
#define HID_DG_TILT_X 0x000d003d
#define HID_DG_TILT_Y 0x000d003e
#define HID_DG_TWIST 0x000d0041
#define HID_DG_TIPSWITCH 0x000d0042
#define HID_DG_TIPSWITCH2 0x000d0043
#define HID_DG_BARRELSWITCH 0x000d0044
......@@ -479,6 +483,7 @@ struct hid_input {
struct list_head list;
struct hid_report *report;
struct input_dev *input;
bool registered;
};
enum hid_type {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment