Commit 972f0513 authored by Rajkumar Manoharan's avatar Rajkumar Manoharan Committed by Kalle Valo

ath10k: fix interpretation of cooling device state

Setting the sysfs attribute ends up configuring the duty cycle,
but the interface through which the attribute is exposed
(cooling_device) is for setting the throttle/cooling state. This
is confusing the user. Hence renaming the cooling device interfaces
for better readability.

Cc: Matthias Kaehlcke <mka@google.com>
Signed-off-by: default avatarRajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
parent 63fb32df
......@@ -46,28 +46,31 @@ static int ath10k_thermal_get_active_vifs(struct ath10k *ar,
return count;
}
static int ath10k_thermal_get_max_dutycycle(struct thermal_cooling_device *cdev,
unsigned long *state)
static int
ath10k_thermal_get_max_throttle_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
*state = ATH10K_QUIET_DUTY_CYCLE_MAX;
*state = ATH10K_THERMAL_THROTTLE_MAX;
return 0;
}
static int ath10k_thermal_get_cur_dutycycle(struct thermal_cooling_device *cdev,
unsigned long *state)
static int
ath10k_thermal_get_cur_throttle_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
struct ath10k *ar = cdev->devdata;
mutex_lock(&ar->conf_mutex);
*state = ar->thermal.duty_cycle;
*state = ar->thermal.throttle_state;
mutex_unlock(&ar->conf_mutex);
return 0;
}
static int ath10k_thermal_set_cur_dutycycle(struct thermal_cooling_device *cdev,
unsigned long duty_cycle)
static int
ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev,
unsigned long throttle_state)
{
struct ath10k *ar = cdev->devdata;
u32 period, duration, enabled;
......@@ -79,9 +82,9 @@ static int ath10k_thermal_set_cur_dutycycle(struct thermal_cooling_device *cdev,
goto out;
}
if (duty_cycle > ATH10K_QUIET_DUTY_CYCLE_MAX) {
ath10k_warn(ar, "duty cycle %ld is exceeding the limit %d\n",
duty_cycle, ATH10K_QUIET_DUTY_CYCLE_MAX);
if (throttle_state > ATH10K_THERMAL_THROTTLE_MAX) {
ath10k_warn(ar, "throttle state %ld is exceeding the limit %d\n",
throttle_state, ATH10K_THERMAL_THROTTLE_MAX);
ret = -EINVAL;
goto out;
}
......@@ -97,7 +100,7 @@ static int ath10k_thermal_set_cur_dutycycle(struct thermal_cooling_device *cdev,
goto out;
}
period = ar->thermal.quiet_period;
duration = (period * duty_cycle) / 100;
duration = (period * throttle_state) / 100;
enabled = duration ? 1 : 0;
ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration,
......@@ -108,16 +111,16 @@ static int ath10k_thermal_set_cur_dutycycle(struct thermal_cooling_device *cdev,
period, duration, enabled, ret);
goto out;
}
ar->thermal.duty_cycle = duty_cycle;
ar->thermal.throttle_state = throttle_state;
out:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static struct thermal_cooling_device_ops ath10k_thermal_ops = {
.get_max_state = ath10k_thermal_get_max_dutycycle,
.get_cur_state = ath10k_thermal_get_cur_dutycycle,
.set_cur_state = ath10k_thermal_set_cur_dutycycle,
.get_max_state = ath10k_thermal_get_max_throttle_state,
.get_cur_state = ath10k_thermal_get_cur_throttle_state,
.set_cur_state = ath10k_thermal_set_cur_throttle_state,
};
static ssize_t ath10k_thermal_show_temp(struct device *dev,
......
......@@ -19,16 +19,16 @@
#define ATH10K_QUIET_PERIOD_DEFAULT 100
#define ATH10K_QUIET_PERIOD_MIN 25
#define ATH10K_QUIET_START_OFFSET 10
#define ATH10K_QUIET_DUTY_CYCLE_MAX 100
#define ATH10K_HWMON_NAME_LEN 15
#define ATH10K_THERMAL_SYNC_TIMEOUT_HZ (5*HZ)
#define ATH10K_THERMAL_THROTTLE_MAX 100
struct ath10k_thermal {
struct thermal_cooling_device *cdev;
struct completion wmi_sync;
/* protected by conf_mutex */
u32 duty_cycle;
u32 throttle_state;
u32 quiet_period;
/* temperature value in Celcius degree
* protected by data_lock
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment