Commit 9768b45c authored by Jane Li's avatar Jane Li Committed by David S. Miller

net: mvneta: support suspend and resume

Add basic support for handling suspend and resume.
Signed-off-by: default avatarJane Li <jiel@marvell.com>
Reviewed-by: default avatarJisheng Zhang <jszhang@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7e3f4f3a
......@@ -431,6 +431,7 @@ struct mvneta_port {
/* Flags for special SoC configurations */
bool neta_armada3700;
u16 rx_offset_correction;
const struct mbus_dram_target_info *dram_target_info;
};
/* The mvneta_tx_desc and mvneta_rx_desc structures describe the
......@@ -4118,7 +4119,6 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
/* Device initialization routine */
static int mvneta_probe(struct platform_device *pdev)
{
const struct mbus_dram_target_info *dram_target_info;
struct resource *res;
struct device_node *dn = pdev->dev.of_node;
struct device_node *phy_node;
......@@ -4267,13 +4267,13 @@ static int mvneta_probe(struct platform_device *pdev)
pp->tx_csum_limit = tx_csum_limit;
dram_target_info = mv_mbus_dram_info();
pp->dram_target_info = mv_mbus_dram_info();
/* Armada3700 requires setting default configuration of Mbus
* windows, however without using filled mbus_dram_target_info
* structure.
*/
if (dram_target_info || pp->neta_armada3700)
mvneta_conf_mbus_windows(pp, dram_target_info);
if (pp->dram_target_info || pp->neta_armada3700)
mvneta_conf_mbus_windows(pp, pp->dram_target_info);
pp->tx_ring_size = MVNETA_MAX_TXD;
pp->rx_ring_size = MVNETA_MAX_RXD;
......@@ -4405,6 +4405,58 @@ static int mvneta_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int mvneta_suspend(struct device *device)
{
struct net_device *dev = dev_get_drvdata(device);
struct mvneta_port *pp = netdev_priv(dev);
if (netif_running(dev))
mvneta_stop(dev);
netif_device_detach(dev);
clk_disable_unprepare(pp->clk_bus);
clk_disable_unprepare(pp->clk);
return 0;
}
static int mvneta_resume(struct device *device)
{
struct platform_device *pdev = to_platform_device(device);
struct net_device *dev = dev_get_drvdata(device);
struct mvneta_port *pp = netdev_priv(dev);
int err;
clk_prepare_enable(pp->clk);
if (!IS_ERR(pp->clk_bus))
clk_prepare_enable(pp->clk_bus);
if (pp->dram_target_info || pp->neta_armada3700)
mvneta_conf_mbus_windows(pp, pp->dram_target_info);
if (pp->bm_priv) {
err = mvneta_bm_port_init(pdev, pp);
if (err < 0) {
dev_info(&pdev->dev, "use SW buffer management\n");
pp->bm_priv = NULL;
}
}
mvneta_defaults_set(pp);
err = mvneta_port_power_up(pp, pp->phy_interface);
if (err < 0) {
dev_err(device, "can't power up port\n");
return err;
}
if (pp->use_inband_status)
mvneta_fixed_link_update(pp, dev->phydev);
netif_device_attach(dev);
if (netif_running(dev))
mvneta_open(dev);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(mvneta_pm_ops, mvneta_suspend, mvneta_resume);
static const struct of_device_id mvneta_match[] = {
{ .compatible = "marvell,armada-370-neta" },
{ .compatible = "marvell,armada-xp-neta" },
......@@ -4419,6 +4471,7 @@ static struct platform_driver mvneta_driver = {
.driver = {
.name = MVNETA_DRIVER_NAME,
.of_match_table = mvneta_match,
.pm = &mvneta_pm_ops,
},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment