Commit 97b1007a authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "This branch contains part 1 of the platform updates for 3.10.  Among
  the highlights:

   - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3)
   - New support for CSR SiRFatlas6 SoCs
   - A handful of updates for NVidia T114 (a.k.a. Tegra 4)
   - A bunch of updates for the shmobile platforms
   - A handful of updates for davinci
   - A few updates for Qualcomm MSM
   - Plus a handful of other patches, defconfig updates, etc."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits)
  ARM: tegra: pm: fix build error w/o PM_SLEEP
  ARM: davinci: ensure global variables are declared
  ARM: davinci: sram.c: fix incorrect type in assignment
  ARM: davinci: da8xx dt: make file local symbols static
  ARM: davinci: da8xx: add remoteproc support
  ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries
  ARM: socfpga: Add clock entries into device tree
  ARM: socfpga: Enable soft reset
  ARM: EXYNOS: replace cpumask by the corresponding macro
  ARM: EXYNOS: handle properly the return values
  ARM: EXYNOS: factor out the idle states
  ARM: OMAP4: Enable fix for Cortex-A9 erratas
  ARM: OMAP2+: Export SoC information to userspace
  ARM: OMAP2+: SoC name and revision unification
  ARM: OMAP2+: Move common part of late init into common function
  ARM: tegra: pm: remove duplicated include from pm.c
  ARM: davinci: da850: override mmc DT node device name
  ARM: davinci: da850: add mmc DT entries
  mmc: davinci_mmc: add DT support
  ARM: SAMSUNG: check processor type before cache restoration in resume
  ...
parents dfab34aa e0d20b69
Altera SOCFPGA Clock Manager
Required properties:
- compatible : "altr,clk-mgr"
- reg : Should contain base address and length for Clock Manager
Example:
clkmgr@ffd04000 {
compatible = "altr,clk-mgr";
reg = <0xffd04000 0x1000>;
};
Broadcom Kona Family timer
-----------------------------------------------------
This timer is used in the following Broadcom SoCs:
BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
Required properties:
- compatible : "bcm,kona-timer"
- reg : Register range for the timer
- interrupts : interrupt for the timer
- clock-frequency: frequency that the clock operates
Example:
timer@35006000 {
compatible = "bcm,kona-timer";
reg = <0x35006000 0x1000>;
interrupts = <0x0 7 0x4>;
clock-frequency = <32768>;
};
...@@ -3,36 +3,35 @@ ...@@ -3,36 +3,35 @@
Properties: Properties:
- compatible : Should at least contain "qcom,msm-timer". More specific - compatible : Should at least contain "qcom,msm-timer". More specific
properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general properties specify which subsystem the timers are paired with.
purpose timer and a debug timer respectively.
- interrupts : Interrupt indicating a match event. "qcom,kpss-timer" - krait subsystem
"qcom,scss-timer" - scorpion subsystem
- reg : Specifies the base address of the timer registers. The second region - interrupts : Interrupts for the the debug timer, the first general purpose
specifies an optional register used to configure the clock divider. timer, and optionally a second general purpose timer in that
order.
- clock-frequency : The frequency of the timer in Hz. - reg : Specifies the base address of the timer registers.
- clock-frequency : The frequency of the debug timer and the general purpose
timer(s) in Hz in that order.
Optional: Optional:
- cpu-offset : per-cpu offset used when the timer is accessed without the - cpu-offset : per-cpu offset used when the timer is accessed without the
CPU remapping facilities. The offset is cpu-offset * cpu-nr. CPU remapping facilities. The offset is
cpu-offset + (0x10000 * cpu-nr).
Example: Example:
timer@200a004 { timer@200a000 {
compatible = "qcom,msm-gpt", "qcom,msm-timer"; compatible = "qcom,scss-timer", "qcom,msm-timer";
interrupts = <1 2 0x301>; interrupts = <1 1 0x301>,
reg = <0x0200a004 0x10>; <1 2 0x301>,
clock-frequency = <32768>; <1 3 0x301>;
cpu-offset = <0x40000>; reg = <0x0200a000 0x100>;
}; clock-frequency = <19200000>,
<32768>;
timer@200a024 {
compatible = "qcom,msm-dgt", "qcom,msm-timer";
interrupts = <1 3 0x301>;
reg = <0x0200a024 0x10>,
<0x0200a034 0x4>;
clock-frequency = <6750000>;
cpu-offset = <0x40000>; cpu-offset = <0x40000>;
}; };
NVIDIA Tegra Power Management Controller (PMC) NVIDIA Tegra Power Management Controller (PMC)
Properties: The PMC block interacts with an external Power Management Unit. The PMC
mostly controls the entry and exit of the system from different sleep
modes. It provides power-gating controllers for SoC and CPU power-islands.
Required properties:
- name : Should be pmc - name : Should be pmc
- compatible : Should contain "nvidia,tegra<chip>-pmc". - compatible : Should contain "nvidia,tegra<chip>-pmc".
- reg : Offset and length of the register set for the device - reg : Offset and length of the register set for the device
- clocks : Must contain an entry for each entry in clock-names.
- clock-names : Must include the following entries:
"pclk" (The Tegra clock of that name),
"clk32k_in" (The 32KHz clock input to Tegra).
Optional properties:
- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal. - nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
The PMU is an external Power Management Unit, whose interrupt output The PMU is an external Power Management Unit, whose interrupt output
signal is fed into the PMC. This signal is optionally inverted, and then signal is fed into the PMC. This signal is optionally inverted, and then
fed into the ARM GIC. The PMC is not involved in the detection or fed into the ARM GIC. The PMC is not involved in the detection or
handling of this interrupt signal, merely its inversion. handling of this interrupt signal, merely its inversion.
- nvidia,suspend-mode : The suspend mode that the platform should use.
Valid values are 0, 1 and 2:
0 (LP0): CPU + Core voltage off and DRAM in self-refresh
1 (LP1): CPU voltage off and DRAM in self-refresh
2 (LP2): CPU voltage off
- nvidia,core-power-req-active-high : Boolean, core power request active-high
- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
is enabled.
Required properties when nvidia,suspend-mode is specified:
- nvidia,cpu-pwr-good-time : CPU power good time in uS.
- nvidia,cpu-pwr-off-time : CPU power off time in uS.
- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
Core power good time in uS.
- nvidia,core-pwr-off-time : Core power off time in uS.
Required properties when nvidia,suspend-mode=<0>:
- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
The LP0 vector contains the warm boot code that is executed by AVP when
resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
processor and always being the first boot processor when chip is power on
or resume from deep sleep mode. When the system is resumed from the deep
sleep mode, the warm boot code will restore some PLLs, clocks and then
bring up CPU0 for resuming the system.
Example: Example:
/ SoC dts including file
pmc@7000f400 { pmc@7000f400 {
compatible = "nvidia,tegra20-pmc"; compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>; reg = <0x7000e400 0x400>;
clocks = <&tegra_car 110>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
nvidia,invert-interrupt; nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <100>;
nvidia,core-pwr-good-time = <3845 3845>;
nvidia,core-pwr-off-time = <458>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
nvidia,lp0-vec = <0xbdffd000 0x2000>;
};
/ Tegra board dts file
{
...
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
...
}; };
Device Tree Clock bindings for Altera's SoCFPGA platform
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- compatible : shall be one of the following:
"altr,socfpga-pll-clock" - for a PLL clock
"altr,socfpga-perip-clock" - The peripheral clock divided from the
PLL clock.
- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
- clocks : shall be the input parent clock phandle for the clock. This is
either an oscillator or a pll output.
- #clock-cells : from common clock binding, shall be set to 0.
Optional properties:
- fixed-divider : If clocks have a fixed divider value, use this property.
* TI Highspeed MMC host controller for DaVinci
The Highspeed MMC Host Controller on TI DaVinci family
provides an interface for MMC, SD and SDIO types of memory cards.
This file documents the properties used by the davinci_mmc driver.
Required properties:
- compatible:
Should be "ti,da830-mmc": for da830, da850, dm365
Should be "ti,dm355-mmc": for dm355, dm644x
Optional properties:
- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1>
- max-frequency: Maximum operating clock frequency, default 25MHz.
- dmas: List of DMA specifiers with the controller specific format
as described in the generic DMA client binding. A tx and rx
specifier is required.
- dma-names: RX and TX DMA request names. These strings correspond
1:1 with the DMA specifiers listed in dmas.
Example:
mmc0: mmc@1c40000 {
compatible = "ti,da830-mmc",
reg = <0x40000 0x1000>;
interrupts = <16>;
status = "okay";
bus-width = <4>;
max-frequency = <50000000>;
dmas = <&edma 16
&edma 17>;
dma-names = "rx", "tx";
};
...@@ -45,6 +45,7 @@ parameter is applicable: ...@@ -45,6 +45,7 @@ parameter is applicable:
AX25 Appropriate AX.25 support is enabled. AX25 Appropriate AX.25 support is enabled.
BLACKFIN Blackfin architecture is enabled. BLACKFIN Blackfin architecture is enabled.
CLK Common clock infrastructure is enabled. CLK Common clock infrastructure is enabled.
CMA Contiguous Memory Area support is enabled.
DRM Direct Rendering Management support is enabled. DRM Direct Rendering Management support is enabled.
DYNAMIC_DEBUG Build in debug messages and enable them at runtime DYNAMIC_DEBUG Build in debug messages and enable them at runtime
EDD BIOS Enhanced Disk Drive Services (EDD) is enabled EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
...@@ -2724,6 +2725,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ...@@ -2724,6 +2725,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Useful for devices that are detected asynchronously Useful for devices that are detected asynchronously
(e.g. USB and MMC devices). (e.g. USB and MMC devices).
rproc_mem=nn[KMG][@address]
[KNL,ARM,CMA] Remoteproc physical memory block.
Memory area to be used by remote processor image,
managed by CMA.
rw [KNL] Mount root device read-write on boot rw [KNL] Mount root device read-write on boot
S [KNL] Run init in single mode S [KNL] Run init in single mode
......
...@@ -671,6 +671,7 @@ config ARCH_TEGRA ...@@ -671,6 +671,7 @@ config ARCH_TEGRA
select HAVE_CLK select HAVE_CLK
select HAVE_SMP select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_CACHE_L2X0
select SOC_BUS
select SPARSE_IRQ select SPARSE_IRQ
select USE_OF select USE_OF
help help
...@@ -1666,7 +1667,7 @@ config ARCH_NR_GPIO ...@@ -1666,7 +1667,7 @@ config ARCH_NR_GPIO
int int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
default 512 if SOC_OMAP5 default 512 if SOC_OMAP5
default 355 if ARCH_U8500 default 392 if ARCH_U8500
default 288 if ARCH_VT8500 || ARCH_SUNXI default 288 if ARCH_VT8500 || ARCH_SUNXI
default 264 if MACH_H4700 default 264 if MACH_H4700
default 0 default 0
......
...@@ -33,6 +33,11 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb ...@@ -33,6 +33,11 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
# sama5d3
dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
......
/*
* DTS file for CSR SiRFatlas6 Evaluation Board
*
* Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "atlas6.dtsi"
/ {
model = "CSR SiRFatlas6 Evaluation Board";
compatible = "sirf,atlas6-cb", "sirf,atlas6";
memory {
reg = <0x00000000 0x20000000>;
};
axi {
peri-iobg {
uart@b0060000 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>;
};
spi@b00d0000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>;
spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
spi@b0170000 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>;
};
i2c0: i2c@b00e0000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
lcd@40 {
compatible = "sirf,lcd";
reg = <0x40>;
};
};
};
disp-iobg {
lcd@90010000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&lcd_24pins_a>;
};
};
};
display: display@0 {
panels {
panel0: panel@0 {
panel-name = "Innolux TFT";
hactive = <800>;
vactive = <480>;
left_margin = <20>;
right_margin = <234>;
upper_margin = <3>;
lower_margin = <41>;
hsync_len = <3>;
vsync_len = <2>;
pixclock = <33264000>;
sync = <3>;
timing = <0x88>;
};
};
};
};
This diff is collapsed.
...@@ -47,4 +47,12 @@ L2: l2-cache { ...@@ -47,4 +47,12 @@ L2: l2-cache {
cache-unified; cache-unified;
cache-level = <2>; cache-level = <2>;
}; };
timer@35006000 {
compatible = "bcm,kona-timer";
reg = <0x35006000 0x1000>;
interrupts = <0x0 7 0x4>;
clock-frequency = <32768>;
};
}; };
...@@ -35,14 +35,84 @@ i2c0: i2c@1c22000 { ...@@ -35,14 +35,84 @@ i2c0: i2c@1c22000 {
clock-frequency = <100000>; clock-frequency = <100000>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>; pinctrl-0 = <&i2c0_pins>;
tps: tps@48 {
reg = <0x48>;
};
}; };
wdt: wdt@1c21000 { wdt: wdt@1c21000 {
status = "okay"; status = "okay";
}; };
mmc0: mmc@1c40000 {
max-frequency = <50000000>;
bus-width = <4>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
};
}; };
nand_cs3@62000000 { nand_cs3@62000000 {
status = "okay"; status = "okay";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&nand_cs3_pins>; pinctrl-0 = <&nand_cs3_pins>;
}; };
vbat: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
};
/include/ "tps6507x.dtsi"
&tps {
vdcdc1_2-supply = <&vbat>;
vdcdc3-supply = <&vbat>;
vldo1_2-supply = <&vbat>;
regulators {
vdcdc1_reg: regulator@0 {
regulator-name = "VDCDC1_3.3V";
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3450000>;
regulator-always-on;
regulator-boot-on;
};
vdcdc2_reg: regulator@1 {
regulator-name = "VDCDC2_3.3V";
regulator-min-microvolt = <1710000>;
regulator-max-microvolt = <3450000>;
regulator-always-on;
regulator-boot-on;
ti,defdcdc_default = <1>;
};
vdcdc3_reg: regulator@2 {
regulator-name = "VDCDC3_1.2V";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
ti,defdcdc_default = <1>;
};
ldo1_reg: regulator@3 {
regulator-name = "LDO1_1.8V";
regulator-min-microvolt = <1710000>;
regulator-max-microvolt = <1890000>;
regulator-always-on;
regulator-boot-on;
};
ldo2_reg: regulator@4 {
regulator-name = "LDO2_1.2V";
regulator-min-microvolt = <1140000>;
regulator-max-microvolt = <1320000>;
regulator-always-on;
regulator-boot-on;
};
};
}; };
...@@ -62,6 +62,15 @@ i2c0_pins: pinmux_i2c0_pins { ...@@ -62,6 +62,15 @@ i2c0_pins: pinmux_i2c0_pins {
0x10 0x00002200 0x0000ff00 0x10 0x00002200 0x0000ff00
>; >;
}; };
mmc0_pins: pinmux_mmc_pins {
pinctrl-single,bits = <
/* MMCSD0_DAT[3] MMCSD0_DAT[2]
* MMCSD0_DAT[1] MMCSD0_DAT[0]
* MMCSD0_CMD MMCSD0_CLK
*/
0x28 0x00222222 0x00ffffff
>;
};
}; };
serial0: serial@1c42000 { serial0: serial@1c42000 {
compatible = "ns16550a"; compatible = "ns16550a";
...@@ -107,6 +116,12 @@ wdt: wdt@1c21000 { ...@@ -107,6 +116,12 @@ wdt: wdt@1c21000 {
reg = <0x21000 0x1000>; reg = <0x21000 0x1000>;
status = "disabled"; status = "disabled";
}; };
mmc0: mmc@1c40000 {
compatible = "ti,da830-mmc";
reg = <0x40000 0x1000>;
interrupts = <16>;
status = "disabled";
};
}; };
nand_cs3@62000000 { nand_cs3@62000000 {
compatible = "ti,davinci-nand"; compatible = "ti,davinci-nand";
......
...@@ -16,19 +16,13 @@ intc: interrupt-controller@2080000 { ...@@ -16,19 +16,13 @@ intc: interrupt-controller@2080000 {
}; };
timer@2000004 { timer@2000004 {
compatible = "qcom,msm-gpt", "qcom,msm-timer"; compatible = "qcom,scss-timer", "qcom,msm-timer";
interrupts = <1 1 0x301>; interrupts = <1 0 0x301>,
reg = <0x02000004 0x10>; <1 1 0x301>,
clock-frequency = <32768>; <1 2 0x301>;
cpu-offset = <0x40000>; reg = <0x02000000 0x100>;
}; clock-frequency = <27000000>,
<32768>;
timer@2000024 {
compatible = "qcom,msm-dgt", "qcom,msm-timer";
interrupts = <1 0 0x301>;
reg = <0x02000024 0x10>,
<0x02000034 0x4>;
clock-frequency = <6750000>;
cpu-offset = <0x40000>; cpu-offset = <0x40000>;
}; };
......
...@@ -15,20 +15,14 @@ intc: interrupt-controller@2000000 { ...@@ -15,20 +15,14 @@ intc: interrupt-controller@2000000 {
< 0x02002000 0x1000 >; < 0x02002000 0x1000 >;
}; };
timer@200a004 { timer@200a000 {
compatible = "qcom,msm-gpt", "qcom,msm-timer"; compatible = "qcom,kpss-timer", "qcom,msm-timer";
interrupts = <1 2 0x301>; interrupts = <1 1 0x301>,
reg = <0x0200a004 0x10>; <1 2 0x301>,
clock-frequency = <32768>; <1 3 0x301>;
cpu-offset = <0x80000>; reg = <0x0200a000 0x100>;
}; clock-frequency = <27000000>,
<32768>;
timer@200a024 {
compatible = "qcom,msm-dgt", "qcom,msm-timer";
interrupts = <1 1 0x301>;
reg = <0x0200a024 0x10>,
<0x0200a034 0x4>;
clock-frequency = <6750000>;
cpu-offset = <0x80000>; cpu-offset = <0x80000>;
}; };
......
/*
* Device Tree Source for Renesas r8a7779
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "renesas,r8a7779";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
};
};
gic: interrupt-controller@f0001000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0xf0001000 0x1000>,
<0xf0000100 0x100>;
};
i2c0: i2c@0xffc70000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xffc70000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 79 0x4>;
};
i2c1: i2c@0xffc71000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xffc71000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 82 0x4>;
};
i2c2: i2c@0xffc72000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xffc72000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 80 0x4>;
};
i2c3: i2c@0xffc73000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xffc73000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 81 0x4>;
};
thermal@ffc48000 {
compatible = "renesas,rcar-thermal";
reg = <0xffc48000 0x38>;
};
sata: sata@fc600000 {
compatible = "renesas,rcar-sata";
reg = <0xfc600000 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 100 0x4>;
};
};
This diff is collapsed.
/*
* sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "sama5d3xmb.dtsi"
/include/ "sama5d3xdm.dtsi"
/ {
model = "Atmel SAMA5D31-EK";
compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
spi0: spi@f0004000 {
status = "okay";
};
ssc0: ssc@f0008000 {
status = "okay";
};
i2c0: i2c@f0014000 {
status = "okay";
};
i2c1: i2c@f0018000 {
status = "okay";
};
macb1: ethernet@f802c000 {
status = "okay";
};
};
};
leds {
d3 {
label = "d3";
gpios = <&pioE 24 0>;
};
};
sound {
status = "okay";
};
};
/*
* sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "sama5d3xmb.dtsi"
/include/ "sama5d3xdm.dtsi"
/ {
model = "Atmel SAMA5D33-EK";
compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
spi0: spi@f0004000 {
status = "okay";
};
ssc0: ssc@f0008000 {
status = "okay";
};
i2c0: i2c@f0014000 {
status = "okay";
};
i2c1: i2c@f0018000 {
status = "okay";
};
macb0: ethernet@f0028000 {
status = "okay";
};
};
};
sound {
status = "okay";
};
};
/*
* sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "sama5d3xmb.dtsi"
/include/ "sama5d3xdm.dtsi"
/ {
model = "Atmel SAMA5D34-EK";
compatible = "atmel,sama5d34ek", "atmel,sama5ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
spi0: spi@f0004000 {
status = "okay";
};
ssc0: ssc@f0008000 {
status = "okay";
};
can0: can@f000c000 {
status = "okay";
};
i2c0: i2c@f0014000 {
status = "okay";
};
i2c1: i2c@f0018000 {
status = "okay";
24c256@50 {
compatible = "24c256";
reg = <0x50>;
pagesize = <64>;
};
};
macb0: ethernet@f0028000 {
status = "okay";
};
};
};
leds {
d3 {
label = "d3";
gpios = <&pioE 24 0>;
};
};
sound {
status = "okay";
};
};
/*
* sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "sama5d3xmb.dtsi"
/ {
model = "Atmel SAMA5D35-EK";
compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
spi0: spi@f0004000 {
status = "okay";
};
can0: can@f000c000 {
status = "okay";
};
i2c1: i2c@f0018000 {
status = "okay";
};
macb0: ethernet@f0028000 {
status = "okay";
};
isi: isi@f0034000 {
status = "okay";
};
macb1: ethernet@f802c000 {
status = "okay";
};
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pb_user1 {
label = "pb_user1";
gpios = <&pioE 27 0>;
linux,code = <0x100>;
gpio-key,wakeup;
};
};
};
/*
* sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/include/ "sama5d3.dtsi"
/ {
compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
chosen {
bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
};
memory {
reg = <0x20000000 0x20000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
};
ahb {
apb {
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
};
};
nand0: nand@60000000 {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
atmel,has-pmecc;
atmel,pmecc-cap = <4>;
atmel,pmecc-sector-size = <512>;
atmel,has-nfc;
atmel,use-nfc-sram;
nand-on-flash-bbt;
status = "okay";
at91bootstrap@0 {
label = "at91bootstrap";
reg = <0x0 0x40000>;
};
bootloader@40000 {
label = "bootloader";
reg = <0x40000 0x80000>;
};
bootloaderenv@c0000 {
label = "bootloader env";
reg = <0xc0000 0xc0000>;
};
dtb@180000 {
label = "device tree";
reg = <0x180000 0x80000>;
};
kernel@200000 {
label = "kernel";
reg = <0x200000 0x600000>;
};
rootfs@800000 {
label = "rootfs";
reg = <0x800000 0x0f800000>;
};
};
};
leds {
compatible = "gpio-leds";
d2 {
label = "d2";
gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */
};
};
};
/*
* sama5d3dm.dtsi - Device Tree file for SAMA5 display module
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/ {
ahb {
apb {
i2c1: i2c@f0018000 {
qt1070: keyboard@1b {
compatible = "qt1070";
reg = <0x1b>;
interrupt-parent = <&pioE>;
interrupts = <31 0x0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qt1070_irq>;
};
};
adc0: adc@f8018000 {
status = "disabled";
};
tsadcc: tsadcc@f8018000 {
status = "okay";
};
pinctrl@fffff200 {
board {
pinctrl_qt1070_irq: qt1070_irq {
atmel,pins =
<4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */
};
};
};
};
};
};
/*
* sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/include/ "sama5d3xcm.dtsi"
/ {
compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
mmc0: mmc@f0000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
status = "okay";
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 17 0>;
};
};
spi0: spi@f0004000 {
m25p80@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;
};
};
/*
* i2c0 conflicts with ISI:
* disable it to allow the use of ISI
* can not enable audio when i2c0 disabled
*/
i2c0: i2c@f0014000 {
wm8904: wm8904@1a {
compatible = "wm8904";
reg = <0x1a>;
};
};
usart1: serial@f0020000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
status = "okay";
};
isi: isi@f0034000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
};
mmc1: mmc@f8000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
status = "okay";
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 18 0>;
};
};
adc0: adc@f8018000 {
pinctrl-names = "default";
pinctrl-0 = <
&pinctrl_adc0_adtrg
&pinctrl_adc0_ad0
&pinctrl_adc0_ad1
&pinctrl_adc0_ad2
&pinctrl_adc0_ad3
&pinctrl_adc0_ad4
>;
status = "okay";
};
macb1: ethernet@f802c000 {
phy-mode = "rmii";
};
pinctrl@fffff200 {
board {
pinctrl_mmc0_cd: mmc0_cd {
atmel,pins =
<3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */
};
pinctrl_mmc1_cd: mmc1_cd {
atmel,pins =
<3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */
};
pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
atmel,pins =
<3 30 0x2 0x0>; /* PD30 periph B */
};
pinctrl_isi_reset: isi_reset-0 {
atmel,pins =
<4 24 0x0 0x0>; /* PE24 gpio */
};
pinctrl_isi_power: isi_power-0 {
atmel,pins =
<4 29 0x0 0x0>; /* PE29 gpio */
};
pinctrl_usba_vbus: usba_vbus {
atmel,pins =
<3 29 0x0 0x4>; /* PD29 GPIO with deglitch */
};
};
};
dbgu: serial@ffffee00 {
status = "okay";
};
watchdog@fffffe40 {
status = "okay";
};
};
usb0: gadget@00500000 {
atmel,vbus-gpio = <&pioD 29 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
usb1: ohci@00600000 {
num-ports = <3>;
atmel,vbus-gpio = <&pioD 25 0
&pioD 26 1
&pioD 27 1
>;
status = "okay";
};
usb2: ehci@00700000 {
status = "okay";
};
};
sound {
compatible = "atmel,sama5d3ek-wm8904";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
atmel,model = "wm8904 @ SAMA5D3EK";
atmel,audio-routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
"IN2L", "Line In Jack",
"IN2R", "Line In Jack",
"IN1L", "Mic";
atmel,ssc-controller = <&ssc0>;
atmel,audio-codec = <&wm8904>;
};
};
...@@ -81,6 +81,163 @@ pdma: pdma@ffe01000 { ...@@ -81,6 +81,163 @@ pdma: pdma@ffe01000 {
}; };
}; };
clkmgr@ffd04000 {
compatible = "altr,clk-mgr";
reg = <0xffd04000 0x1000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
osc: osc1 {
#clock-cells = <0>;
compatible = "fixed-clock";
};
main_pll: main_pll {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
clocks = <&osc>;
reg = <0x40>;
mpuclk: mpuclk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
fixed-divider = <2>;
reg = <0x48>;
};
mainclk: mainclk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
fixed-divider = <4>;
reg = <0x4C>;
};
dbg_base_clk: dbg_base_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
fixed-divider = <4>;
reg = <0x50>;
};
main_qspi_clk: main_qspi_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
reg = <0x54>;
};
main_nand_sdmmc_clk: main_nand_sdmmc_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
reg = <0x58>;
};
cfg_s2f_usr0_clk: cfg_s2f_usr0_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
reg = <0x5C>;
};
};
periph_pll: periph_pll {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
clocks = <&osc>;
reg = <0x80>;
emac0_clk: emac0_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x88>;
};
emac1_clk: emac1_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x8C>;
};
per_qspi_clk: per_qsi_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x90>;
};
per_nand_mmc_clk: per_nand_mmc_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x94>;
};
per_base_clk: per_base_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x98>;
};
s2f_usr1_clk: s2f_usr1_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&periph_pll>;
reg = <0x9C>;
};
};
sdram_pll: sdram_pll {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
clocks = <&osc>;
reg = <0xC0>;
ddr_dqs_clk: ddr_dqs_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&sdram_pll>;
reg = <0xC8>;
};
ddr_2x_dqs_clk: ddr_2x_dqs_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&sdram_pll>;
reg = <0xCC>;
};
ddr_dq_clk: ddr_dq_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&sdram_pll>;
reg = <0xD0>;
};
s2f_usr2_clk: s2f_usr2_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&sdram_pll>;
reg = <0xD4>;
};
};
};
};
gmac0: stmmac@ff700000 { gmac0: stmmac@ff700000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
reg = <0xff700000 0x2000>; reg = <0xff700000 0x2000>;
......
...@@ -33,6 +33,14 @@ memory { ...@@ -33,6 +33,14 @@ memory {
}; };
soc { soc {
clkmgr@ffd04000 {
clocks {
osc1 {
clock-frequency = <25000000>;
};
};
};
timer0@ffc08000 { timer0@ffc08000 {
clock-frequency = <100000000>; clock-frequency = <100000000>;
}; };
......
...@@ -33,6 +33,14 @@ memory { ...@@ -33,6 +33,14 @@ memory {
}; };
soc { soc {
clkmgr@ffd04000 {
clocks {
osc1 {
clock-frequency = <10000000>;
};
};
};
timer0@ffc08000 { timer0@ffc08000 {
clock-frequency = <7000000>; clock-frequency = <7000000>;
}; };
......
...@@ -18,4 +18,17 @@ serial@70006300 { ...@@ -18,4 +18,17 @@ serial@70006300 {
pmc { pmc {
nvidia,invert-interrupt; nvidia,invert-interrupt;
}; };
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
}; };
...@@ -18,4 +18,17 @@ serial@70006300 { ...@@ -18,4 +18,17 @@ serial@70006300 {
pmc { pmc {
nvidia,invert-interrupt; nvidia,invert-interrupt;
}; };
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
}; };
...@@ -101,6 +101,8 @@ rtc { ...@@ -101,6 +101,8 @@ rtc {
pmc { pmc {
compatible = "nvidia,tegra114-pmc"; compatible = "nvidia,tegra114-pmc";
reg = <0x7000e400 0x400>; reg = <0x7000e400 0x400>;
clocks = <&tegra_car 261>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
}; };
iommu { iommu {
......
...@@ -447,6 +447,19 @@ sdhci@c8000600 { ...@@ -447,6 +447,19 @@ sdhci@c8000600 {
cd-gpios = <&gpio 23 1>; /* gpio PC7 */ cd-gpios = <&gpio 23 1>; /* gpio PC7 */
}; };
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
sound { sound {
compatible = "nvidia,tegra-audio-wm9712-colibri_t20", compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
"nvidia,tegra-audio-wm9712"; "nvidia,tegra-audio-wm9712";
......
...@@ -451,6 +451,19 @@ sdhci@c8000600 { ...@@ -451,6 +451,19 @@ sdhci@c8000600 {
bus-width = <8>; bus-width = <8>;
}; };
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
kbc { kbc {
status = "okay"; status = "okay";
nvidia,debounce-delay-ms = <2>; nvidia,debounce-delay-ms = <2>;
......
...@@ -447,6 +447,19 @@ sdhci@c8000600 { ...@@ -447,6 +447,19 @@ sdhci@c8000600 {
bus-width = <8>; bus-width = <8>;
}; };
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
gpio-keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
......
...@@ -595,6 +595,19 @@ sdhci@c8000600 { ...@@ -595,6 +595,19 @@ sdhci@c8000600 {
bus-width = <8>; bus-width = <8>;
}; };
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
gpio-keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
......
...@@ -471,6 +471,19 @@ sdhci@c8000600 { ...@@ -471,6 +471,19 @@ sdhci@c8000600 {
status = "okay"; status = "okay";
}; };
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
regulators { regulators {
compatible = "simple-bus"; compatible = "simple-bus";
......
...@@ -330,6 +330,19 @@ sdhci@c8000600 { ...@@ -330,6 +330,19 @@ sdhci@c8000600 {
bus-width = <4>; bus-width = <4>;
}; };
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
poweroff { poweroff {
compatible = "gpio-poweroff"; compatible = "gpio-poweroff";
gpios = <&gpio 191 1>; /* gpio PX7, active low */ gpios = <&gpio 191 1>; /* gpio PX7, active low */
......
...@@ -531,6 +531,19 @@ sdhci@c8000600 { ...@@ -531,6 +531,19 @@ sdhci@c8000600 {
bus-width = <8>; bus-width = <8>;
}; };
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
regulators { regulators {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <1>; #address-cells = <1>;
......
...@@ -520,6 +520,19 @@ sdhci@c8000600 { ...@@ -520,6 +520,19 @@ sdhci@c8000600 {
bus-width = <8>; bus-width = <8>;
}; };
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
kbc { kbc {
status = "okay"; status = "okay";
nvidia,debounce-delay-ms = <20>; nvidia,debounce-delay-ms = <20>;
......
...@@ -418,6 +418,8 @@ kbc { ...@@ -418,6 +418,8 @@ kbc {
pmc { pmc {
compatible = "nvidia,tegra20-pmc"; compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>; reg = <0x7000e400 0x400>;
clocks = <&tegra_car 110>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
}; };
memory-controller@7000f000 { memory-controller@7000f000 {
......
...@@ -268,6 +268,19 @@ sdhci@78000600 { ...@@ -268,6 +268,19 @@ sdhci@78000600 {
bus-width = <8>; bus-width = <8>;
}; };
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
regulators { regulators {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <1>; #address-cells = <1>;
......
...@@ -322,6 +322,19 @@ sdhci@78000600 { ...@@ -322,6 +322,19 @@ sdhci@78000600 {
bus-width = <8>; bus-width = <8>;
}; };
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
regulators { regulators {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <1>; #address-cells = <1>;
......
...@@ -427,6 +427,8 @@ kbc { ...@@ -427,6 +427,8 @@ kbc {
pmc { pmc {
compatible = "nvidia,tegra30-pmc"; compatible = "nvidia,tegra30-pmc";
reg = <0x7000e400 0x400>; reg = <0x7000e400 0x400>;
clocks = <&tegra_car 218>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
}; };
memory-controller { memory-controller {
......
/*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Integrated Power Management Chip
* http://www.ti.com/lit/ds/symlink/tps65070.pdf
*/
&tps {
compatible = "ti,tps6507x";
regulators {
#address-cells = <1>;
#size-cells = <0>;
vdcdc1_reg: regulator@0 {
reg = <0>;
regulator-compatible = "VDCDC1";
};
vdcdc2_reg: regulator@1 {
reg = <1>;
regulator-compatible = "VDCDC2";
};
vdcdc3_reg: regulator@2 {
reg = <2>;
regulator-compatible = "VDCDC3";
};
ldo1_reg: regulator@3 {
reg = <3>;
regulator-compatible = "LDO1";
};
ldo2_reg: regulator@4 {
reg = <4>;
regulator-compatible = "LDO2";
};
};
};
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_CGROUPS=y
CONFIG_CGROUP_SCHED=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
# CONFIG_BLOCK is not set
CONFIG_ARCH_SHMOBILE=y
CONFIG_ARCH_R8A73A4=y
CONFIG_MACH_APE6EVM=y
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BPREDICT_DISABLE=y
CONFIG_PL310_ERRATA_588369=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_SMP=y
CONFIG_SCHED_MC=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_NR_CPUS=8
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
# CONFIG_HW_PERF_EVENTS is not set
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_ARM_APPENDED_DTB=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6_SIT is not set
CONFIG_NETFILTER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_CADENCE is not set
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=12
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_GPIO_SH_PFC=y
CONFIG_GPIOLIB=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_ROOT_NFS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_ENABLE_DEFAULT_TRACERS=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
...@@ -20,15 +20,19 @@ CONFIG_ARCH_R8A7740=y ...@@ -20,15 +20,19 @@ CONFIG_ARCH_R8A7740=y
CONFIG_MACH_ARMADILLO800EVA=y CONFIG_MACH_ARMADILLO800EVA=y
# CONFIG_SH_TIMER_TMU is not set # CONFIG_SH_TIMER_TMU is not set
CONFIG_ARM_THUMB=y CONFIG_ARM_THUMB=y
CONFIG_CPU_BPREDICT_DISABLE=y
CONFIG_CACHE_L2X0=y CONFIG_CACHE_L2X0=y
CONFIG_ARM_ERRATA_430973=y CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_458693=y CONFIG_ARM_ERRATA_458693=y
CONFIG_ARM_ERRATA_460075=y CONFIG_ARM_ERRATA_460075=y
CONFIG_PL310_ERRATA_588369=y
CONFIG_ARM_ERRATA_720789=y CONFIG_ARM_ERRATA_720789=y
CONFIG_PL310_ERRATA_727915=y
CONFIG_ARM_ERRATA_743622=y CONFIG_ARM_ERRATA_743622=y
CONFIG_ARM_ERRATA_751472=y CONFIG_ARM_ERRATA_751472=y
CONFIG_PL310_ERRATA_753970=y
CONFIG_ARM_ERRATA_754322=y CONFIG_ARM_ERRATA_754322=y
CONFIG_PL310_ERRATA_769419=y
CONFIG_ARM_ERRATA_775420=y
CONFIG_AEABI=y CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set # CONFIG_OABI_COMPAT is not set
CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_FORCE_MAX_ZONEORDER=13
...@@ -37,6 +41,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 ...@@ -37,6 +41,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_APPENDED_DTB=y
CONFIG_KEXEC=y CONFIG_KEXEC=y
CONFIG_VFP=y CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y CONFIG_PM_RUNTIME=y
CONFIG_NET=y CONFIG_NET=y
...@@ -88,6 +93,7 @@ CONFIG_I2C=y ...@@ -88,6 +93,7 @@ CONFIG_I2C=y
CONFIG_I2C_GPIO=y CONFIG_I2C_GPIO=y
CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_SH_MOBILE=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_SUPPORT=y
CONFIG_VIDEO_DEV=y CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y
......
...@@ -59,10 +59,13 @@ CONFIG_DEVTMPFS_MOUNT=y ...@@ -59,10 +59,13 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_TTY_PRINTK=y CONFIG_TTY_PRINTK=y
# CONFIG_HW_RANDOM is not set CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_I2C=y CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y CONFIG_I2C_CHARDEV=y
CONFIG_I2C_BCM2835=y CONFIG_I2C_BCM2835=y
CONFIG_SPI=y
CONFIG_SPI_BCM2835=y
CONFIG_GPIO_SYSFS=y CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set # CONFIG_USB_SUPPORT is not set
...@@ -108,9 +111,5 @@ CONFIG_TEST_KSTRTOX=y ...@@ -108,9 +111,5 @@ CONFIG_TEST_KSTRTOX=y
CONFIG_STRICT_DEVMEM=y CONFIG_STRICT_DEVMEM=y
CONFIG_DEBUG_LL=y CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set # CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set # CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
...@@ -33,7 +33,6 @@ CONFIG_NO_HZ=y ...@@ -33,7 +33,6 @@ CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y CONFIG_SMP=y
CONFIG_SCHED_MC=y CONFIG_SCHED_MC=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set # CONFIG_OABI_COMPAT is not set
CONFIG_HIGHMEM=y CONFIG_HIGHMEM=y
...@@ -86,7 +85,6 @@ CONFIG_I2C_SH_MOBILE=y ...@@ -86,7 +85,6 @@ CONFIG_I2C_SH_MOBILE=y
CONFIG_GPIO_PCF857X=y CONFIG_GPIO_PCF857X=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_REGULATOR=y CONFIG_REGULATOR=y
CONFIG_REGULATOR_DUMMY=y
CONFIG_FB=y CONFIG_FB=y
CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y
......
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y CONFIG_HIGH_RES_TIMERS=y
...@@ -18,6 +17,7 @@ CONFIG_MODULE_UNLOAD=y ...@@ -18,6 +17,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_LPC32XX=y CONFIG_ARCH_LPC32XX=y
CONFIG_GPIO_PCA953X=y
CONFIG_KEYBOARD_GPIO_POLLED=y CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_PREEMPT=y CONFIG_PREEMPT=y
CONFIG_AEABI=y CONFIG_AEABI=y
...@@ -48,6 +48,8 @@ CONFIG_IPV6=y ...@@ -48,6 +48,8 @@ CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_PRIVACY=y
# CONFIG_WIRELESS is not set # CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
CONFIG_MTD=y CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y
...@@ -55,7 +57,6 @@ CONFIG_MTD_CHAR=y ...@@ -55,7 +57,6 @@ CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_MUSEUM_IDS=y
CONFIG_MTD_NAND_SLC_LPC32XX=y CONFIG_MTD_NAND_SLC_LPC32XX=y
CONFIG_MTD_NAND_MLC_LPC32XX=y CONFIG_MTD_NAND_MLC_LPC32XX=y
CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP=y
...@@ -70,7 +71,6 @@ CONFIG_BLK_DEV_SD=y ...@@ -70,7 +71,6 @@ CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
CONFIG_MII=y CONFIG_MII=y
# CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CIRRUS is not set # CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_INTEL is not set
...@@ -84,7 +84,6 @@ CONFIG_LPC_ENET=y ...@@ -84,7 +84,6 @@ CONFIG_LPC_ENET=y
# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_SMSC_PHY=y CONFIG_SMSC_PHY=y
# CONFIG_WLAN is not set # CONFIG_WLAN is not set
CONFIG_INPUT_MATRIXKMAP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
...@@ -108,6 +107,19 @@ CONFIG_I2C_PNX=y ...@@ -108,6 +107,19 @@ CONFIG_I2C_PNX=y
CONFIG_SPI=y CONFIG_SPI=y
CONFIG_SPI_PL022=y CONFIG_SPI_PL022=y
CONFIG_GPIO_SYSFS=y CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_PL061=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_74X164=y
CONFIG_SENSORS_DS620=y CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_MAX6639=y CONFIG_SENSORS_MAX6639=y
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
...@@ -144,6 +156,7 @@ CONFIG_USB_G_SERIAL=m ...@@ -144,6 +156,7 @@ CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y CONFIG_MMC=y
# CONFIG_MMC_BLOCK_BOUNCE is not set # CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SPI=y
CONFIG_NEW_LEDS=y CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS=y
CONFIG_LEDS_PCA9532=y CONFIG_LEDS_PCA9532=y
......
...@@ -75,6 +75,7 @@ CONFIG_I2C=y ...@@ -75,6 +75,7 @@ CONFIG_I2C=y
CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_SH_MOBILE=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
# CONFIG_MFD_SUPPORT is not set # CONFIG_MFD_SUPPORT is not set
CONFIG_REGULATOR=y
CONFIG_FB=y CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SH_MOBILE_LCDC=y
...@@ -94,6 +95,9 @@ CONFIG_USB_RENESAS_USBHS=y ...@@ -94,6 +95,9 @@ CONFIG_USB_RENESAS_USBHS=y
CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=y CONFIG_USB_RENESAS_USBHS_UDC=y
CONFIG_MMC=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_DMADEVICES=y CONFIG_DMADEVICES=y
CONFIG_SH_DMAE=y CONFIG_SH_DMAE=y
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
......
...@@ -49,6 +49,10 @@ CONFIG_DEVTMPFS_MOUNT=y ...@@ -49,6 +49,10 @@ CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
CONFIG_SCSI=y CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_ATA_SFF=y
CONFIG_ATA_BMDMA=y
CONFIG_SATA_RCAR=y
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_FARADAY is not set
...@@ -75,6 +79,7 @@ CONFIG_I2C_RCAR=y ...@@ -75,6 +79,7 @@ CONFIG_I2C_RCAR=y
CONFIG_SPI=y CONFIG_SPI=y
CONFIG_SPI_SH_HSPI=y CONFIG_SPI_SH_HSPI=y
CONFIG_GPIO_SYSFS=y CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_RCAR=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_THERMAL=y CONFIG_THERMAL=y
CONFIG_RCAR_THERMAL=y CONFIG_RCAR_THERMAL=y
...@@ -88,6 +93,9 @@ CONFIG_USB_OHCI_HCD=y ...@@ -88,6 +93,9 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_UIO=y CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_IOMMU_SUPPORT is not set # CONFIG_IOMMU_SUPPORT is not set
......
...@@ -75,7 +75,7 @@ CONFIG_REALTEK_PHY=y ...@@ -75,7 +75,7 @@ CONFIG_REALTEK_PHY=y
CONFIG_MICREL_PHY=y CONFIG_MICREL_PHY=y
# CONFIG_WLAN is not set # CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=m CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_TOUCHSCREEN=y
...@@ -99,6 +99,8 @@ CONFIG_SPI_MXS=y ...@@ -99,6 +99,8 @@ CONFIG_SPI_MXS=y
CONFIG_DEBUG_GPIO=y CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_STMP3XXX_RTC_WATCHDOG=y
CONFIG_REGULATOR=y CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_FB=y CONFIG_FB=y
...@@ -123,6 +125,7 @@ CONFIG_USB_STORAGE=y ...@@ -123,6 +125,7 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_PHY=y CONFIG_USB_PHY=y
CONFIG_USB_MXS_PHY=y CONFIG_USB_MXS_PHY=y
CONFIG_MMC=y CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_MXS=y CONFIG_MMC_MXS=y
CONFIG_NEW_LEDS=y CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS=y
......
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_SOC_SAM_V7=y
CONFIG_SOC_SAMA5D3=y
CONFIG_MACH_SAMA5_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_UACCESS_WITH_MEMCPY=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
CONFIG_IPV6_SIT_6RD=y
CONFIG_CAN=y
CONFIG_CAN_AT91=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_MAC80211_LEDS=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_MICREL_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_AT91=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_GPIO=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_SSB=m
CONFIG_FB=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_HID_GENERIC is not set
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_AT91=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_DMADEVICES=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_AT91_ADC=y
CONFIG_EXT2_FS=y
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_UBIFS_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_DEV_ATMEL_AES=y
CONFIG_CRYPTO_DEV_ATMEL_TDES=y
CONFIG_CRYPTO_DEV_ATMEL_SHA=y
CONFIG_CRC_CCITT=m
CONFIG_CRC_ITU_T=m
CONFIG_EXPERIMENTAL=y
CONFIG_NO_HZ=y CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y CONFIG_IKCONFIG=y
...@@ -20,15 +19,14 @@ CONFIG_MODULE_UNLOAD=y ...@@ -20,15 +19,14 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y CONFIG_PARTITION_ADVANCED=y
CONFIG_EFI_PARTITION=y
# CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set # CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA=y
CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X=y
CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y
CONFIG_ARCH_TEGRA_114_SOC=y
CONFIG_TEGRA_PCI=y CONFIG_TEGRA_PCI=y
CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA=y
CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y
CONFIG_SMP=y CONFIG_SMP=y
CONFIG_PREEMPT=y CONFIG_PREEMPT=y
...@@ -37,8 +35,8 @@ CONFIG_AEABI=y ...@@ -37,8 +35,8 @@ CONFIG_AEABI=y
CONFIG_HIGHMEM=y CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_AUTO_ZRELADDR=y
CONFIG_KEXEC=y CONFIG_KEXEC=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE=y
...@@ -108,6 +106,7 @@ CONFIG_RT2X00=y ...@@ -108,6 +106,7 @@ CONFIG_RT2X00=y
CONFIG_RT2800USB=m CONFIG_RT2800USB=m
CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_TEGRA=y CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_MISC=y CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y CONFIG_INPUT_MPU3050=y
# CONFIG_LEGACY_PTYS is not set # CONFIG_LEGACY_PTYS is not set
...@@ -117,7 +116,6 @@ CONFIG_SERIAL_8250_CONSOLE=y ...@@ -117,7 +116,6 @@ CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set # CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set # CONFIG_I2C_COMPAT is not set
CONFIG_I2C_MUX=y CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_MUX_PINCTRL=y
...@@ -126,6 +124,7 @@ CONFIG_SPI=y ...@@ -126,6 +124,7 @@ CONFIG_SPI=y
CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y CONFIG_GPIO_TPS65910=y
CONFIG_POWER_SUPPLY=y CONFIG_POWER_SUPPLY=y
...@@ -136,12 +135,17 @@ CONFIG_SENSORS_LM90=y ...@@ -136,12 +135,17 @@ CONFIG_SENSORS_LM90=y
CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y CONFIG_MFD_TPS65910=y
CONFIG_MFD_MAX8907=y CONFIG_MFD_MAX8907=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_PALMAS=y
CONFIG_REGULATOR=y CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS6586X=y CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y CONFIG_REGULATOR_TPS65910=y
CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_SUPPORT=y
...@@ -187,10 +191,8 @@ CONFIG_LEDS_GPIO=y ...@@ -187,10 +191,8 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_EM3027=y
......
...@@ -5,7 +5,6 @@ CONFIG_BLK_DEV_INITRD=y ...@@ -5,7 +5,6 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_U8500=y CONFIG_ARCH_U8500=y
CONFIG_MACH_HREFV60=y CONFIG_MACH_HREFV60=y
...@@ -90,6 +89,8 @@ CONFIG_LEDS_CLASS=y ...@@ -90,6 +89,8 @@ CONFIG_LEDS_CLASS=y
CONFIG_LEDS_LM3530=y CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LP5521=y CONFIG_LEDS_LP5521=y
CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_AB8500=y
CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_PL031=y
...@@ -103,6 +104,7 @@ CONFIG_EXT2_FS_XATTR=y ...@@ -103,6 +104,7 @@ CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_POSIX_ACL=y
......
...@@ -6,6 +6,10 @@ config HAVE_AT91_DBGU0 ...@@ -6,6 +6,10 @@ config HAVE_AT91_DBGU0
config HAVE_AT91_DBGU1 config HAVE_AT91_DBGU1
bool bool
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
config AT91_SAM9_ALT_RESET config AT91_SAM9_ALT_RESET
bool bool
default !ARCH_AT91X40 default !ARCH_AT91X40
...@@ -14,17 +18,59 @@ config AT91_SAM9G45_RESET ...@@ -14,17 +18,59 @@ config AT91_SAM9G45_RESET
bool bool
default !ARCH_AT91X40 default !ARCH_AT91X40
config AT91_SAM9_TIME
bool
config SOC_AT91SAM9 config SOC_AT91SAM9
bool bool
select AT91_SAM9_TIME
select CPU_ARM926T select CPU_ARM926T
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER select MULTI_IRQ_HANDLER
select SPARSE_IRQ select SPARSE_IRQ
config SOC_SAMA5
bool
select AT91_SAM9_TIME
select CPU_V7
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
menu "Atmel AT91 System-on-Chip" menu "Atmel AT91 System-on-Chip"
choice
prompt "Core type"
config SOC_SAM_V4_V5
bool "ARM7/ARM9"
help
Select this if you are using one of Atmel's AT91SAM9, AT91RM9200
or AT91X40 SoC.
config SOC_SAM_V7
bool "Cortex A5"
help
Select this if you are using one of Atmel's SAMA5D3 SoC.
endchoice
comment "Atmel AT91 Processor" comment "Atmel AT91 Processor"
if SOC_SAM_V7
config SOC_SAMA5D3
bool "SAMA5D3 family"
depends on SOC_SAM_V7
select SOC_SAMA5
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU1
help
Select this if you are using one of Atmel's SAMA5D3 family SoC.
This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35.
endif
if SOC_SAM_V4_V5
config SOC_AT91RM9200 config SOC_AT91RM9200
bool "AT91RM9200" bool "AT91RM9200"
select CPU_ARM920T select CPU_ARM920T
...@@ -90,13 +136,10 @@ config SOC_AT91SAM9N12 ...@@ -90,13 +136,10 @@ config SOC_AT91SAM9N12
help help
Select this if you are using Atmel's AT91SAM9N12 SoC. Select this if you are using Atmel's AT91SAM9N12 SoC.
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
# ---------------------------------------------------------- # ----------------------------------------------------------
source arch/arm/mach-at91/Kconfig.non_dt source arch/arm/mach-at91/Kconfig.non_dt
endif # SOC_SAM_V4_V5
comment "Generic Board Type" comment "Generic Board Type"
...@@ -116,6 +159,14 @@ config MACH_AT91SAM9_DT ...@@ -116,6 +159,14 @@ config MACH_AT91SAM9_DT
Select this if you want to experiment device-tree with Select this if you want to experiment device-tree with
an Atmel Evaluation Kit. an Atmel Evaluation Kit.
config MACH_SAMA5_DT
bool "Atmel SAMA5 Evaluation Kits with device-tree support"
depends on SOC_SAMA5
select USE_OF
help
Select this if you want to experiment device-tree with
an Atmel Evaluation Kit.
# ---------------------------------------------------------- # ----------------------------------------------------------
comment "AT91 Feature Selections" comment "AT91 Feature Selections"
......
...@@ -10,7 +10,8 @@ obj- := ...@@ -10,7 +10,8 @@ obj- :=
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
obj-$(CONFIG_SOC_AT91SAM9) += at91sam926x_time.o sam9_smc.o obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o
obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
# CPU-specific support # CPU-specific support
obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o
...@@ -21,6 +22,7 @@ obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o ...@@ -21,6 +22,7 @@ obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o
obj-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12.o obj-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12.o
obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o
obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o
obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
...@@ -90,6 +92,9 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o ...@@ -90,6 +92,9 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
# SAMA5 board with device-tree
obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o
# AT91X40 board-specific support # AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
......
...@@ -385,7 +385,7 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { ...@@ -385,7 +385,7 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
0 /* Advanced Interrupt Controller (IRQ6) */ 0 /* Advanced Interrupt Controller (IRQ6) */
}; };
AT91_SOC_START(rm9200) AT91_SOC_START(at91rm9200)
.map_io = at91rm9200_map_io, .map_io = at91rm9200_map_io,
.default_irq_priority = at91rm9200_default_irq_priority, .default_irq_priority = at91rm9200_default_irq_priority,
.ioremap_registers = at91rm9200_ioremap_registers, .ioremap_registers = at91rm9200_ioremap_registers,
......
...@@ -397,7 +397,7 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { ...@@ -397,7 +397,7 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */ 0, /* Advanced Interrupt Controller */
}; };
AT91_SOC_START(sam9260) AT91_SOC_START(at91sam9260)
.map_io = at91sam9260_map_io, .map_io = at91sam9260_map_io,
.default_irq_priority = at91sam9260_default_irq_priority, .default_irq_priority = at91sam9260_default_irq_priority,
.ioremap_registers = at91sam9260_ioremap_registers, .ioremap_registers = at91sam9260_ioremap_registers,
......
...@@ -337,7 +337,7 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { ...@@ -337,7 +337,7 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */ 0, /* Advanced Interrupt Controller */
}; };
AT91_SOC_START(sam9261) AT91_SOC_START(at91sam9261)
.map_io = at91sam9261_map_io, .map_io = at91sam9261_map_io,
.default_irq_priority = at91sam9261_default_irq_priority, .default_irq_priority = at91sam9261_default_irq_priority,
.ioremap_registers = at91sam9261_ioremap_registers, .ioremap_registers = at91sam9261_ioremap_registers,
......
...@@ -374,7 +374,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { ...@@ -374,7 +374,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller (IRQ1) */ 0, /* Advanced Interrupt Controller (IRQ1) */
}; };
AT91_SOC_START(sam9263) AT91_SOC_START(at91sam9263)
.map_io = at91sam9263_map_io, .map_io = at91sam9263_map_io,
.default_irq_priority = at91sam9263_default_irq_priority, .default_irq_priority = at91sam9263_default_irq_priority,
.ioremap_registers = at91sam9263_ioremap_registers, .ioremap_registers = at91sam9263_ioremap_registers,
......
...@@ -420,7 +420,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { ...@@ -420,7 +420,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller (IRQ0) */ 0, /* Advanced Interrupt Controller (IRQ0) */
}; };
AT91_SOC_START(sam9g45) AT91_SOC_START(at91sam9g45)
.map_io = at91sam9g45_map_io, .map_io = at91sam9g45_map_io,
.default_irq_priority = at91sam9g45_default_irq_priority, .default_irq_priority = at91sam9g45_default_irq_priority,
.ioremap_registers = at91sam9g45_ioremap_registers, .ioremap_registers = at91sam9g45_ioremap_registers,
......
...@@ -228,7 +228,7 @@ void __init at91sam9n12_initialize(void) ...@@ -228,7 +228,7 @@ void __init at91sam9n12_initialize(void)
at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
} }
AT91_SOC_START(sam9n12) AT91_SOC_START(at91sam9n12)
.map_io = at91sam9n12_map_io, .map_io = at91sam9n12_map_io,
.register_clocks = at91sam9n12_register_clocks, .register_clocks = at91sam9n12_register_clocks,
.init = at91sam9n12_initialize, .init = at91sam9n12_initialize,
......
...@@ -340,7 +340,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { ...@@ -340,7 +340,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */ 0, /* Advanced Interrupt Controller */
}; };
AT91_SOC_START(sam9rl) AT91_SOC_START(at91sam9rl)
.map_io = at91sam9rl_map_io, .map_io = at91sam9rl_map_io,
.default_irq_priority = at91sam9rl_default_irq_priority, .default_irq_priority = at91sam9rl_default_irq_priority,
.ioremap_registers = at91sam9rl_ioremap_registers, .ioremap_registers = at91sam9rl_ioremap_registers,
......
...@@ -322,7 +322,7 @@ static void __init at91sam9x5_map_io(void) ...@@ -322,7 +322,7 @@ static void __init at91sam9x5_map_io(void)
* Interrupt initialization * Interrupt initialization
* -------------------------------------------------------------------- */ * -------------------------------------------------------------------- */
AT91_SOC_START(sam9x5) AT91_SOC_START(at91sam9x5)
.map_io = at91sam9x5_map_io, .map_io = at91sam9x5_map_io,
.register_clocks = at91sam9x5_register_clocks, .register_clocks = at91sam9x5_register_clocks,
AT91_SOC_END AT91_SOC_END
/*
* Setup code for SAMA5 Evaluation Kits with Device Tree support
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/micrel_phy.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "at91_aic.h"
#include "generic.h"
static const struct of_device_id irq_of_match[] __initconst = {
{ .compatible = "atmel,sama5d3-aic", .data = at91_aic5_of_init },
{ /*sentinel*/ }
};
static void __init at91_dt_init_irq(void)
{
of_irq_init(irq_of_match);
}
static int ksz9021rn_phy_fixup(struct phy_device *phy)
{
int value;
#define GMII_RCCPSR 260
#define GMII_RRDPSR 261
#define GMII_ERCR 11
#define GMII_ERDWR 12
/* Set delay values */
value = GMII_RCCPSR | 0x8000;
phy_write(phy, GMII_ERCR, value);
value = 0xF2F4;
phy_write(phy, GMII_ERDWR, value);
value = GMII_RRDPSR | 0x8000;
phy_write(phy, GMII_ERCR, value);
value = 0x2222;
phy_write(phy, GMII_ERDWR, value);
return 0;
}
static void __init sama5_dt_device_init(void)
{
if (of_machine_is_compatible("atmel,sama5d3xcm"))
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
ksz9021rn_phy_fixup);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *sama5_dt_board_compat[] __initdata = {
"atmel,sama5",
NULL
};
DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
/* Maintainer: Atmel */
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic5_handle_irq,
.init_early = at91_dt_initialize,
.init_irq = at91_dt_init_irq,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_dt_board_compat,
MACHINE_END
...@@ -54,7 +54,10 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); ...@@ -54,7 +54,10 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
*/ */
#define cpu_has_utmi() ( cpu_is_at91sam9rl() \ #define cpu_has_utmi() ( cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \ || cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5()) || cpu_is_at91sam9x5() \
|| cpu_is_sama5d3())
#define cpu_has_1056M_plla() (cpu_is_sama5d3())
#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \ #define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
|| cpu_is_at91sam9g45() \ || cpu_is_at91sam9g45() \
...@@ -75,7 +78,8 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); ...@@ -75,7 +78,8 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
|| cpu_is_at91sam9n12())) || cpu_is_at91sam9n12()))
#define cpu_has_upll() (cpu_is_at91sam9g45() \ #define cpu_has_upll() (cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5()) || cpu_is_at91sam9x5() \
|| cpu_is_sama5d3())
/* USB host HS & FS */ /* USB host HS & FS */
#define cpu_has_uhp() (!cpu_is_at91sam9rl()) #define cpu_has_uhp() (!cpu_is_at91sam9rl())
...@@ -83,18 +87,22 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); ...@@ -83,18 +87,22 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
/* USB device FS only */ /* USB device FS only */
#define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \ #define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \ || cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5())) || cpu_is_at91sam9x5() \
|| cpu_is_sama5d3()))
#define cpu_has_plladiv2() (cpu_is_at91sam9g45() \ #define cpu_has_plladiv2() (cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5() \ || cpu_is_at91sam9x5() \
|| cpu_is_at91sam9n12()) || cpu_is_at91sam9n12() \
|| cpu_is_sama5d3())
#define cpu_has_mdiv3() (cpu_is_at91sam9g45() \ #define cpu_has_mdiv3() (cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5() \ || cpu_is_at91sam9x5() \
|| cpu_is_at91sam9n12()) || cpu_is_at91sam9n12() \
|| cpu_is_sama5d3())
#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \ #define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \
|| cpu_is_at91sam9n12()) || cpu_is_at91sam9n12() \
|| cpu_is_sama5d3())
static LIST_HEAD(clocks); static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock); static DEFINE_SPINLOCK(clk_lock);
...@@ -210,10 +218,26 @@ struct clk mck = { ...@@ -210,10 +218,26 @@ struct clk mck = {
static void pmc_periph_mode(struct clk *clk, int is_on) static void pmc_periph_mode(struct clk *clk, int is_on)
{ {
u32 regval = 0;
/*
* With sama5d3 devices, we are managing clock division so we have to
* use the Peripheral Control Register introduced from at91sam9x5
* devices.
*/
if (cpu_is_sama5d3()) {
regval |= AT91_PMC_PCR_CMD; /* write command */
regval |= clk->pid & AT91_PMC_PCR_PID; /* peripheral selection */
regval |= AT91_PMC_PCR_DIV(clk->div);
if (is_on)
regval |= AT91_PMC_PCR_EN; /* enable clock */
at91_pmc_write(AT91_PMC_PCR, regval);
} else {
if (is_on) if (is_on)
at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask); at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask);
else else
at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask); at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask);
}
} }
static struct clk __init *at91_css_to_clk(unsigned long css) static struct clk __init *at91_css_to_clk(unsigned long css)
...@@ -443,14 +467,18 @@ static void __init init_programmable_clock(struct clk *clk) ...@@ -443,14 +467,18 @@ static void __init init_programmable_clock(struct clk *clk)
static int at91_clk_show(struct seq_file *s, void *unused) static int at91_clk_show(struct seq_file *s, void *unused)
{ {
u32 scsr, pcsr, uckr = 0, sr; u32 scsr, pcsr, pcsr1 = 0, uckr = 0, sr;
struct clk *clk; struct clk *clk;
scsr = at91_pmc_read(AT91_PMC_SCSR); scsr = at91_pmc_read(AT91_PMC_SCSR);
pcsr = at91_pmc_read(AT91_PMC_PCSR); pcsr = at91_pmc_read(AT91_PMC_PCSR);
if (cpu_is_sama5d3())
pcsr1 = at91_pmc_read(AT91_PMC_PCSR1);
sr = at91_pmc_read(AT91_PMC_SR); sr = at91_pmc_read(AT91_PMC_SR);
seq_printf(s, "SCSR = %8x\n", scsr); seq_printf(s, "SCSR = %8x\n", scsr);
seq_printf(s, "PCSR = %8x\n", pcsr); seq_printf(s, "PCSR = %8x\n", pcsr);
if (cpu_is_sama5d3())
seq_printf(s, "PCSR1 = %8x\n", pcsr1);
seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR)); seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR));
seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR)); seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR));
seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR)); seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR));
...@@ -470,20 +498,30 @@ static int at91_clk_show(struct seq_file *s, void *unused) ...@@ -470,20 +498,30 @@ static int at91_clk_show(struct seq_file *s, void *unused)
list_for_each_entry(clk, &clocks, node) { list_for_each_entry(clk, &clocks, node) {
char *state; char *state;
if (clk->mode == pmc_sys_mode) if (clk->mode == pmc_sys_mode) {
state = (scsr & clk->pmc_mask) ? "on" : "off"; state = (scsr & clk->pmc_mask) ? "on" : "off";
else if (clk->mode == pmc_periph_mode) } else if (clk->mode == pmc_periph_mode) {
if (cpu_is_sama5d3()) {
u32 pmc_mask = 1 << (clk->pid % 32);
if (clk->pid > 31)
state = (pcsr1 & pmc_mask) ? "on" : "off";
else
state = (pcsr & pmc_mask) ? "on" : "off";
} else {
state = (pcsr & clk->pmc_mask) ? "on" : "off"; state = (pcsr & clk->pmc_mask) ? "on" : "off";
else if (clk->mode == pmc_uckr_mode) }
} else if (clk->mode == pmc_uckr_mode) {
state = (uckr & clk->pmc_mask) ? "on" : "off"; state = (uckr & clk->pmc_mask) ? "on" : "off";
else if (clk->pmc_mask) } else if (clk->pmc_mask) {
state = (sr & clk->pmc_mask) ? "on" : "off"; state = (sr & clk->pmc_mask) ? "on" : "off";
else if (clk == &clk32k || clk == &main_clk) } else if (clk == &clk32k || clk == &main_clk) {
state = "on"; state = "on";
else } else {
state = ""; state = "";
}
seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n", seq_printf(s, "%-10s users=%2d %-3s %9lu Hz %s\n",
clk->name, clk->users, state, clk_get_rate(clk), clk->name, clk->users, state, clk_get_rate(clk),
clk->parent ? clk->parent->name : ""); clk->parent ? clk->parent->name : "");
} }
...@@ -530,6 +568,9 @@ int __init clk_register(struct clk *clk) ...@@ -530,6 +568,9 @@ int __init clk_register(struct clk *clk)
if (clk_is_peripheral(clk)) { if (clk_is_peripheral(clk)) {
if (!clk->parent) if (!clk->parent)
clk->parent = &mck; clk->parent = &mck;
if (cpu_is_sama5d3())
clk->rate_hz = DIV_ROUND_UP(clk->parent->rate_hz,
1 << clk->div);
clk->mode = pmc_periph_mode; clk->mode = pmc_periph_mode;
} }
else if (clk_is_sys(clk)) { else if (clk_is_sys(clk)) {
...@@ -555,7 +596,11 @@ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) ...@@ -555,7 +596,11 @@ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
unsigned mul, div; unsigned mul, div;
div = reg & 0xff; div = reg & 0xff;
mul = (reg >> 16) & 0x7ff; if (cpu_is_sama5d3())
mul = AT91_PMC3_MUL_GET(reg);
else
mul = AT91_PMC_MUL_GET(reg);
if (div && mul) { if (div && mul) {
freq /= div; freq /= div;
freq *= mul + 1; freq *= mul + 1;
...@@ -706,12 +751,15 @@ static int __init at91_pmc_init(unsigned long main_clock) ...@@ -706,12 +751,15 @@ static int __init at91_pmc_init(unsigned long main_clock)
/* report if PLLA is more than mildly overclocked */ /* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR)); plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR));
if (cpu_has_300M_plla()) { if (cpu_has_1056M_plla()) {
if (plla.rate_hz > 300000000) if (plla.rate_hz > 1056000000)
pll_overclock = true; pll_overclock = true;
} else if (cpu_has_800M_plla()) { } else if (cpu_has_800M_plla()) {
if (plla.rate_hz > 800000000) if (plla.rate_hz > 800000000)
pll_overclock = true; pll_overclock = true;
} else if (cpu_has_300M_plla()) {
if (plla.rate_hz > 300000000)
pll_overclock = true;
} else if (cpu_has_240M_plla()) { } else if (cpu_has_240M_plla()) {
if (plla.rate_hz > 240000000) if (plla.rate_hz > 240000000)
pll_overclock = true; pll_overclock = true;
...@@ -872,6 +920,7 @@ int __init at91_clock_init(unsigned long main_clock) ...@@ -872,6 +920,7 @@ int __init at91_clock_init(unsigned long main_clock)
static int __init at91_clock_reset(void) static int __init at91_clock_reset(void)
{ {
unsigned long pcdr = 0; unsigned long pcdr = 0;
unsigned long pcdr1 = 0;
unsigned long scdr = 0; unsigned long scdr = 0;
struct clk *clk; struct clk *clk;
...@@ -879,8 +928,17 @@ static int __init at91_clock_reset(void) ...@@ -879,8 +928,17 @@ static int __init at91_clock_reset(void)
if (clk->users > 0) if (clk->users > 0)
continue; continue;
if (clk->mode == pmc_periph_mode) if (clk->mode == pmc_periph_mode) {
if (cpu_is_sama5d3()) {
u32 pmc_mask = 1 << (clk->pid % 32);
if (clk->pid > 31)
pcdr1 |= pmc_mask;
else
pcdr |= pmc_mask;
} else
pcdr |= clk->pmc_mask; pcdr |= clk->pmc_mask;
}
if (clk->mode == pmc_sys_mode) if (clk->mode == pmc_sys_mode)
scdr |= clk->pmc_mask; scdr |= clk->pmc_mask;
...@@ -888,8 +946,9 @@ static int __init at91_clock_reset(void) ...@@ -888,8 +946,9 @@ static int __init at91_clock_reset(void)
pr_debug("Clocks: disable unused %s\n", clk->name); pr_debug("Clocks: disable unused %s\n", clk->name);
} }
at91_pmc_write(AT91_PMC_PCDR, pcdr);
at91_pmc_write(AT91_PMC_SCDR, scdr); at91_pmc_write(AT91_PMC_SCDR, scdr);
if (cpu_is_sama5d3())
at91_pmc_write(AT91_PMC_PCDR1, pcdr1);
return 0; return 0;
} }
......
...@@ -20,7 +20,9 @@ struct clk { ...@@ -20,7 +20,9 @@ struct clk {
const char *name; /* unique clock name */ const char *name; /* unique clock name */
struct clk_lookup cl; struct clk_lookup cl;
unsigned long rate_hz; unsigned long rate_hz;
unsigned div; /* parent clock divider */
struct clk *parent; struct clk *parent;
unsigned pid; /* peripheral ID */
u32 pmc_mask; u32 pmc_mask;
void (*mode)(struct clk *, int); void (*mode)(struct clk *, int);
unsigned id:3; /* PCK0..4, or 32k/main/a/b */ unsigned id:3; /* PCK0..4, or 32k/main/a/b */
......
...@@ -75,6 +75,9 @@ extern void __iomem *at91_pmc_base; ...@@ -75,6 +75,9 @@ extern void __iomem *at91_pmc_base;
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ #define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ #define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
#define AT91_PMC_MUL_GET(n) ((n) >> 16 & 0x7ff)
#define AT91_PMC3_MUL (0x7f << 18) /* PLL Multiplier [SAMA5 only] */
#define AT91_PMC3_MUL_GET(n) ((n) >> 18 & 0x7f)
#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ #define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
#define AT91_PMC_USBDIV_1 (0 << 28) #define AT91_PMC_USBDIV_1 (0 << 28)
#define AT91_PMC_USBDIV_2 (1 << 28) #define AT91_PMC_USBDIV_2 (1 << 28)
...@@ -167,11 +170,18 @@ extern void __iomem *at91_pmc_base; ...@@ -167,11 +170,18 @@ extern void __iomem *at91_pmc_base;
#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */ #define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */
#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */ #define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */
#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9] */ #define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/
#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */
#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */
#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */
#define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */ #define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */
#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command */ #define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */
#define AT91_PMC_PCR_DIV (0x3 << 16) /* Divisor Value */ #define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */
#define AT91_PMC_PCRDIV(n) (((n) << 16) & AT91_PMC_PCR_DIV) #define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */
#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */
#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */
#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */
#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */
#endif #endif
...@@ -36,6 +36,8 @@ ...@@ -36,6 +36,8 @@
#define ARCH_ID_AT91M40807 0x14080745 #define ARCH_ID_AT91M40807 0x14080745
#define ARCH_ID_AT91R40008 0x44000840 #define ARCH_ID_AT91R40008 0x44000840
#define ARCH_ID_SAMA5D3 0x8A5C07C0
#define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M11 0x00000001
#define ARCH_EXID_AT91SAM9M10 0x00000002 #define ARCH_EXID_AT91SAM9M10 0x00000002
#define ARCH_EXID_AT91SAM9G46 0x00000003 #define ARCH_EXID_AT91SAM9G46 0x00000003
...@@ -47,6 +49,11 @@ ...@@ -47,6 +49,11 @@
#define ARCH_EXID_AT91SAM9G25 0x00000003 #define ARCH_EXID_AT91SAM9G25 0x00000003
#define ARCH_EXID_AT91SAM9X25 0x00000004 #define ARCH_EXID_AT91SAM9X25 0x00000004
#define ARCH_EXID_SAMA5D31 0x00444300
#define ARCH_EXID_SAMA5D33 0x00414300
#define ARCH_EXID_SAMA5D34 0x00414301
#define ARCH_EXID_SAMA5D35 0x00584300
#define ARCH_FAMILY_AT91X92 0x09200000 #define ARCH_FAMILY_AT91X92 0x09200000
#define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9 0x01900000
#define ARCH_FAMILY_AT91SAM9XE 0x02900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000
...@@ -75,6 +82,9 @@ enum at91_soc_type { ...@@ -75,6 +82,9 @@ enum at91_soc_type {
/* SAM9N12 */ /* SAM9N12 */
AT91_SOC_SAM9N12, AT91_SOC_SAM9N12,
/* SAMA5D3 */
AT91_SOC_SAMA5D3,
/* Unknown type */ /* Unknown type */
AT91_SOC_NONE AT91_SOC_NONE
}; };
...@@ -93,6 +103,10 @@ enum at91_soc_subtype { ...@@ -93,6 +103,10 @@ enum at91_soc_subtype {
AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35, AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35,
AT91_SOC_SAM9G25, AT91_SOC_SAM9X25, AT91_SOC_SAM9G25, AT91_SOC_SAM9X25,
/* SAMA5D3 */
AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34,
AT91_SOC_SAMA5D35,
/* Unknown subtype */ /* Unknown subtype */
AT91_SOC_SUBTYPE_NONE AT91_SOC_SUBTYPE_NONE
}; };
...@@ -187,6 +201,12 @@ static inline int at91_soc_is_detected(void) ...@@ -187,6 +201,12 @@ static inline int at91_soc_is_detected(void)
#define cpu_is_at91sam9n12() (0) #define cpu_is_at91sam9n12() (0)
#endif #endif
#ifdef CONFIG_SOC_SAMA5D3
#define cpu_is_sama5d3() (at91_soc_initdata.type == AT91_SOC_SAMA5D3)
#else
#define cpu_is_sama5d3() (0)
#endif
/* /*
* Since this is ARM, we will never run on any AVR32 CPU. But these * Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers. * definitions may reduce clutter in common drivers.
......
/*
* Chip-specific header file for the SAMA5D3 family
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Common definitions.
* Based on SAMA5D3 datasheet.
*
* Licensed under GPLv2 or later.
*/
#ifndef SAMA5D3_H
#define SAMA5D3_H
/*
* Peripheral identifiers/interrupts.
*/
#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
#define AT91_ID_SYS 1 /* System Peripherals */
#define SAMA5D3_ID_DBGU 2 /* debug Unit (usually no special interrupt line) */
#define AT91_ID_PIT 3 /* PIT */
#define SAMA5D3_ID_WDT 4 /* Watchdog Timer Interrupt */
#define SAMA5D3_ID_HSMC 5 /* Static Memory Controller */
#define SAMA5D3_ID_PIOA 6 /* PIOA */
#define SAMA5D3_ID_PIOB 7 /* PIOB */
#define SAMA5D3_ID_PIOC 8 /* PIOC */
#define SAMA5D3_ID_PIOD 9 /* PIOD */
#define SAMA5D3_ID_PIOE 10 /* PIOE */
#define SAMA5D3_ID_SMD 11 /* SMD Soft Modem */
#define SAMA5D3_ID_USART0 12 /* USART0 */
#define SAMA5D3_ID_USART1 13 /* USART1 */
#define SAMA5D3_ID_USART2 14 /* USART2 */
#define SAMA5D3_ID_USART3 15 /* USART3 */
#define SAMA5D3_ID_UART0 16 /* UART 0 */
#define SAMA5D3_ID_UART1 17 /* UART 1 */
#define SAMA5D3_ID_TWI0 18 /* Two-Wire Interface 0 */
#define SAMA5D3_ID_TWI1 19 /* Two-Wire Interface 1 */
#define SAMA5D3_ID_TWI2 20 /* Two-Wire Interface 2 */
#define SAMA5D3_ID_HSMCI0 21 /* MCI */
#define SAMA5D3_ID_HSMCI1 22 /* MCI */
#define SAMA5D3_ID_HSMCI2 23 /* MCI */
#define SAMA5D3_ID_SPI0 24 /* Serial Peripheral Interface 0 */
#define SAMA5D3_ID_SPI1 25 /* Serial Peripheral Interface 1 */
#define SAMA5D3_ID_TC0 26 /* Timer Counter 0 */
#define SAMA5D3_ID_TC1 27 /* Timer Counter 2 */
#define SAMA5D3_ID_PWM 28 /* Pulse Width Modulation Controller */
#define SAMA5D3_ID_ADC 29 /* Touch Screen ADC Controller */
#define SAMA5D3_ID_DMA0 30 /* DMA Controller 0 */
#define SAMA5D3_ID_DMA1 31 /* DMA Controller 1 */
#define SAMA5D3_ID_UHPHS 32 /* USB Host High Speed */
#define SAMA5D3_ID_UDPHS 33 /* USB Device High Speed */
#define SAMA5D3_ID_GMAC 34 /* Gigabit Ethernet MAC */
#define SAMA5D3_ID_EMAC 35 /* Ethernet MAC */
#define SAMA5D3_ID_LCDC 36 /* LCD Controller */
#define SAMA5D3_ID_ISI 37 /* Image Sensor Interface */
#define SAMA5D3_ID_SSC0 38 /* Synchronous Serial Controller 0 */
#define SAMA5D3_ID_SSC1 39 /* Synchronous Serial Controller 1 */
#define SAMA5D3_ID_CAN0 40 /* CAN Controller 0 */
#define SAMA5D3_ID_CAN1 41 /* CAN Controller 1 */
#define SAMA5D3_ID_SHA 42 /* Secure Hash Algorithm */
#define SAMA5D3_ID_AES 43 /* Advanced Encryption Standard */
#define SAMA5D3_ID_TDES 44 /* Triple Data Encryption Standard */
#define SAMA5D3_ID_TRNG 45 /* True Random Generator Number */
#define SAMA5D3_ID_IRQ0 47 /* Advanced Interrupt Controller (IRQ0) */
/*
* Internal Memory
*/
#define SAMA5D3_SRAM_BASE 0x00300000 /* Internal SRAM base address */
#define SAMA5D3_SRAM_SIZE (128 * SZ_1K) /* Internal SRAM size (128Kb) */
#endif
/*
* Chip-specific setup code for the SAMA5D3 family
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* Licensed under GPLv2 or later.
*/
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/sama5d3.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
/*
* The peripheral clocks.
*/
static struct clk pioA_clk = {
.name = "pioA_clk",
.pid = SAMA5D3_ID_PIOA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioB_clk = {
.name = "pioB_clk",
.pid = SAMA5D3_ID_PIOB,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioC_clk = {
.name = "pioC_clk",
.pid = SAMA5D3_ID_PIOC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioD_clk = {
.name = "pioD_clk",
.pid = SAMA5D3_ID_PIOD,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioE_clk = {
.name = "pioE_clk",
.pid = SAMA5D3_ID_PIOE,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart0_clk = {
.name = "usart0_clk",
.pid = SAMA5D3_ID_USART0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk usart1_clk = {
.name = "usart1_clk",
.pid = SAMA5D3_ID_USART1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk usart2_clk = {
.name = "usart2_clk",
.pid = SAMA5D3_ID_USART2,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk usart3_clk = {
.name = "usart3_clk",
.pid = SAMA5D3_ID_USART3,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk uart0_clk = {
.name = "uart0_clk",
.pid = SAMA5D3_ID_UART0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk uart1_clk = {
.name = "uart1_clk",
.pid = SAMA5D3_ID_UART1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk twi0_clk = {
.name = "twi0_clk",
.pid = SAMA5D3_ID_TWI0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk twi1_clk = {
.name = "twi1_clk",
.pid = SAMA5D3_ID_TWI1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk twi2_clk = {
.name = "twi2_clk",
.pid = SAMA5D3_ID_TWI2,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk mmc0_clk = {
.name = "mci0_clk",
.pid = SAMA5D3_ID_HSMCI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc1_clk = {
.name = "mci1_clk",
.pid = SAMA5D3_ID_HSMCI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc2_clk = {
.name = "mci2_clk",
.pid = SAMA5D3_ID_HSMCI2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi0_clk = {
.name = "spi0_clk",
.pid = SAMA5D3_ID_SPI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi1_clk = {
.name = "spi1_clk",
.pid = SAMA5D3_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tcb0_clk = {
.name = "tcb0_clk",
.pid = SAMA5D3_ID_TC0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk tcb1_clk = {
.name = "tcb1_clk",
.pid = SAMA5D3_ID_TC1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk adc_clk = {
.name = "adc_clk",
.pid = SAMA5D3_ID_ADC,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk adc_op_clk = {
.name = "adc_op_clk",
.type = CLK_TYPE_PERIPHERAL,
.rate_hz = 5000000,
};
static struct clk dma0_clk = {
.name = "dma0_clk",
.pid = SAMA5D3_ID_DMA0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk dma1_clk = {
.name = "dma1_clk",
.pid = SAMA5D3_ID_DMA1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk uhphs_clk = {
.name = "uhphs",
.pid = SAMA5D3_ID_UHPHS,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk udphs_clk = {
.name = "udphs_clk",
.pid = SAMA5D3_ID_UDPHS,
.type = CLK_TYPE_PERIPHERAL,
};
/* gmac only for sama5d33, sama5d34, sama5d35 */
static struct clk macb0_clk = {
.name = "macb0_clk",
.pid = SAMA5D3_ID_GMAC,
.type = CLK_TYPE_PERIPHERAL,
};
/* emac only for sama5d31, sama5d35 */
static struct clk macb1_clk = {
.name = "macb1_clk",
.pid = SAMA5D3_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
/* lcd only for sama5d31, sama5d33, sama5d34 */
static struct clk lcdc_clk = {
.name = "lcdc_clk",
.pid = SAMA5D3_ID_LCDC,
.type = CLK_TYPE_PERIPHERAL,
};
/* isi only for sama5d33, sama5d35 */
static struct clk isi_clk = {
.name = "isi_clk",
.pid = SAMA5D3_ID_ISI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk can0_clk = {
.name = "can0_clk",
.pid = SAMA5D3_ID_CAN0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk can1_clk = {
.name = "can1_clk",
.pid = SAMA5D3_ID_CAN1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk ssc0_clk = {
.name = "ssc0_clk",
.pid = SAMA5D3_ID_SSC0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk ssc1_clk = {
.name = "ssc1_clk",
.pid = SAMA5D3_ID_SSC1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk sha_clk = {
.name = "sha_clk",
.pid = SAMA5D3_ID_SHA,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV8,
};
static struct clk aes_clk = {
.name = "aes_clk",
.pid = SAMA5D3_ID_AES,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tdes_clk = {
.name = "tdes_clk",
.pid = SAMA5D3_ID_TDES,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
&pioC_clk,
&pioD_clk,
&pioE_clk,
&usart0_clk,
&usart1_clk,
&usart2_clk,
&usart3_clk,
&uart0_clk,
&uart1_clk,
&twi0_clk,
&twi1_clk,
&twi2_clk,
&mmc0_clk,
&mmc1_clk,
&mmc2_clk,
&spi0_clk,
&spi1_clk,
&tcb0_clk,
&tcb1_clk,
&adc_clk,
&adc_op_clk,
&dma0_clk,
&dma1_clk,
&uhphs_clk,
&udphs_clk,
&macb0_clk,
&macb1_clk,
&lcdc_clk,
&isi_clk,
&can0_clk,
&can1_clk,
&ssc0_clk,
&ssc1_clk,
&sha_clk,
&aes_clk,
&tdes_clk,
};
static struct clk pck0 = {
.name = "pck0",
.pmc_mask = AT91_PMC_PCK0,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 0,
};
static struct clk pck1 = {
.name = "pck1",
.pmc_mask = AT91_PMC_PCK1,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 1,
};
static struct clk pck2 = {
.name = "pck2",
.pmc_mask = AT91_PMC_PCK2,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 2,
};
static struct clk_lookup periph_clocks_lookups[] = {
/* lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioD_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioE_clk),
CLKDEV_CON_DEV_ID("usart", "f001c000.serial", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "f0020000.serial", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart3_clk),
CLKDEV_CON_DEV_ID(NULL, "f0014000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "f0018000.i2c", &twi1_clk),
CLKDEV_CON_DEV_ID(NULL, "f801c000.i2c", &twi2_clk),
CLKDEV_CON_DEV_ID("mci_clk", "f0000000.mmc", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "f8000000.mmc", &mmc1_clk),
CLKDEV_CON_DEV_ID("mci_clk", "f8004000.mmc", &mmc2_clk),
CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "f8008000.spi", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f0010000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f8014000.timer", &tcb1_clk),
CLKDEV_CON_DEV_ID("tsc_clk", "f8018000.tsadcc", &adc_clk),
CLKDEV_CON_DEV_ID("dma_clk", "ffffe600.dma-controller", &dma0_clk),
CLKDEV_CON_DEV_ID("dma_clk", "ffffe800.dma-controller", &dma1_clk),
CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
CLKDEV_CON_DEV_ID("hclk", "f0028000.ethernet", &macb0_clk),
CLKDEV_CON_DEV_ID("pclk", "f0028000.ethernet", &macb0_clk),
CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb1_clk),
CLKDEV_CON_DEV_ID("pclk", "f802c000.ethernet", &macb1_clk),
CLKDEV_CON_DEV_ID("pclk", "f0008000.ssc", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "f000c000.ssc", &ssc1_clk),
CLKDEV_CON_DEV_ID("can_clk", "f000c000.can", &can0_clk),
CLKDEV_CON_DEV_ID("can_clk", "f8010000.can", &can1_clk),
CLKDEV_CON_DEV_ID("sha_clk", "f8034000.sha", &sha_clk),
CLKDEV_CON_DEV_ID("aes_clk", "f8038000.aes", &aes_clk),
CLKDEV_CON_DEV_ID("tdes_clk", "f803c000.tdes", &tdes_clk),
};
static void __init sama5d3_register_clocks(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clkdev_add_table(periph_clocks_lookups,
ARRAY_SIZE(periph_clocks_lookups));
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
}
/* --------------------------------------------------------------------
* AT91SAM9x5 processor initialization
* -------------------------------------------------------------------- */
static void __init sama5d3_map_io(void)
{
at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE);
}
AT91_SOC_START(sama5d3)
.map_io = sama5d3_map_io,
.register_clocks = sama5d3_register_clocks,
AT91_SOC_END
...@@ -151,6 +151,11 @@ static void __init soc_detect(u32 dbgu_base) ...@@ -151,6 +151,11 @@ static void __init soc_detect(u32 dbgu_base)
at91_soc_initdata.type = AT91_SOC_SAM9N12; at91_soc_initdata.type = AT91_SOC_SAM9N12;
at91_boot_soc = at91sam9n12_soc; at91_boot_soc = at91sam9n12_soc;
break; break;
case ARCH_ID_SAMA5D3:
at91_soc_initdata.type = AT91_SOC_SAMA5D3;
at91_boot_soc = sama5d3_soc;
break;
} }
/* at91sam9g10 */ /* at91sam9g10 */
...@@ -206,6 +211,23 @@ static void __init soc_detect(u32 dbgu_base) ...@@ -206,6 +211,23 @@ static void __init soc_detect(u32 dbgu_base)
break; break;
} }
} }
if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_SAMA5D31:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D31;
break;
case ARCH_EXID_SAMA5D33:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D33;
break;
case ARCH_EXID_SAMA5D34:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D34;
break;
case ARCH_EXID_SAMA5D35:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D35;
break;
}
}
} }
static const char *soc_name[] = { static const char *soc_name[] = {
...@@ -219,6 +241,7 @@ static const char *soc_name[] = { ...@@ -219,6 +241,7 @@ static const char *soc_name[] = {
[AT91_SOC_SAM9RL] = "at91sam9rl", [AT91_SOC_SAM9RL] = "at91sam9rl",
[AT91_SOC_SAM9X5] = "at91sam9x5", [AT91_SOC_SAM9X5] = "at91sam9x5",
[AT91_SOC_SAM9N12] = "at91sam9n12", [AT91_SOC_SAM9N12] = "at91sam9n12",
[AT91_SOC_SAMA5D3] = "sama5d3",
[AT91_SOC_NONE] = "Unknown" [AT91_SOC_NONE] = "Unknown"
}; };
...@@ -241,6 +264,10 @@ static const char *soc_subtype_name[] = { ...@@ -241,6 +264,10 @@ static const char *soc_subtype_name[] = {
[AT91_SOC_SAM9X35] = "at91sam9x35", [AT91_SOC_SAM9X35] = "at91sam9x35",
[AT91_SOC_SAM9G25] = "at91sam9g25", [AT91_SOC_SAM9G25] = "at91sam9g25",
[AT91_SOC_SAM9X25] = "at91sam9x25", [AT91_SOC_SAM9X25] = "at91sam9x25",
[AT91_SOC_SAMA5D31] = "sama5d31",
[AT91_SOC_SAMA5D33] = "sama5d33",
[AT91_SOC_SAMA5D34] = "sama5d34",
[AT91_SOC_SAMA5D35] = "sama5d35",
[AT91_SOC_SUBTYPE_NONE] = "Unknown" [AT91_SOC_SUBTYPE_NONE] = "Unknown"
}; };
......
...@@ -22,9 +22,10 @@ extern struct at91_init_soc at91sam9g45_soc; ...@@ -22,9 +22,10 @@ extern struct at91_init_soc at91sam9g45_soc;
extern struct at91_init_soc at91sam9rl_soc; extern struct at91_init_soc at91sam9rl_soc;
extern struct at91_init_soc at91sam9x5_soc; extern struct at91_init_soc at91sam9x5_soc;
extern struct at91_init_soc at91sam9n12_soc; extern struct at91_init_soc at91sam9n12_soc;
extern struct at91_init_soc sama5d3_soc;
#define AT91_SOC_START(_name) \ #define AT91_SOC_START(_name) \
struct at91_init_soc __initdata at91##_name##_soc \ struct at91_init_soc __initdata _name##_soc \
__used \ __used \
= { \ = { \
.builtin = 1, \ .builtin = 1, \
...@@ -68,3 +69,7 @@ static inline int at91_soc_is_enabled(void) ...@@ -68,3 +69,7 @@ static inline int at91_soc_is_enabled(void)
#if !defined(CONFIG_SOC_AT91SAM9N12) #if !defined(CONFIG_SOC_AT91SAM9N12)
#define at91sam9n12_soc at91_boot_soc #define at91sam9n12_soc at91_boot_soc
#endif #endif
#if !defined(CONFIG_SOC_SAMA5D3)
#define sama5d3_soc at91_boot_soc
#endif
...@@ -246,7 +246,6 @@ static struct davinci_mmc_config da830_evm_mmc_config = { ...@@ -246,7 +246,6 @@ static struct davinci_mmc_config da830_evm_mmc_config = {
.wires = 8, .wires = 8,
.max_freq = 50000000, .max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
}; };
static inline void da830_evm_init_mmc(void) static inline void da830_evm_init_mmc(void)
......
...@@ -802,7 +802,6 @@ static struct davinci_mmc_config da850_mmc_config = { ...@@ -802,7 +802,6 @@ static struct davinci_mmc_config da850_mmc_config = {
.wires = 4, .wires = 4,
.max_freq = 50000000, .max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
}; };
static const short da850_evm_mmcsd0_pins[] __initconst = { static const short da850_evm_mmcsd0_pins[] __initconst = {
...@@ -1372,7 +1371,6 @@ static struct davinci_mmc_config da850_wl12xx_mmc_config = { ...@@ -1372,7 +1371,6 @@ static struct davinci_mmc_config da850_wl12xx_mmc_config = {
.max_freq = 25000000, .max_freq = 25000000,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE | .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_POWER_OFF_CARD, MMC_CAP_POWER_OFF_CARD,
.version = MMC_CTLR_VERSION_2,
}; };
static const short da850_wl12xx_pins[] __initconst = { static const short da850_wl12xx_pins[] __initconst = {
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment