drm: drop _mode_ from remaining connector functions

Since there's very few callers of these I've decided to do them all in
one patch. With this the unecessarily long drm_mode_connector_ prefix
is gone from the codebase! The only exception being struct
drm_mode_connector_set_property, which is part of the uapi so can't be
renamed.

Again done with sed+some manual fixups for indent issues.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-8-daniel.vetter@ffwll.ch

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c

@@ -345,7 +345,7 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
 						aconnector, connector->base.id, aconnector->mst_port);
 
 			aconnector->port = port;
-			drm_mode_connector_set_path_property(connector, pathprop);
+			drm_connector_set_path_property(connector, pathprop);
 
 			drm_connector_list_iter_end(&conn_iter);
 			aconnector->mst_connected = true;
@@ -393,7 +393,7 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
 		dev->mode_config.tile_property,
 		0);
 
-	drm_mode_connector_set_path_property(connector, pathprop);
+	drm_connector_set_path_property(connector, pathprop);
 
 	/*
 	 * Initialize connector state before adding the connectror to drm and
@@ -441,7 +441,7 @@ static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr)
 static void dm_dp_mst_link_status_reset(struct drm_connector *connector)
 {
 	mutex_lock(&connector->dev->mode_config.mutex);
-	drm_mode_connector_set_link_status_property(connector, DRM_MODE_LINK_STATUS_BAD);
+	drm_connector_set_link_status_property(connector, DRM_MODE_LINK_STATUS_BAD);
 	mutex_unlock(&connector->dev->mode_config.mutex);
 }
 

drivers/gpu/drm/drm_atomic_helper.c

@@ -2867,7 +2867,7 @@ static int update_output_state(struct drm_atomic_state *state,
  * resets the "link-status" property to GOOD, to force any link
  * re-training. The SETCRTC ioctl does not define whether an update does
  * need a full modeset or just a plane update, hence we're allowed to do
- * that. See also drm_mode_connector_set_link_status_property().
+ * that. See also drm_connector_set_link_status_property().
  *
  * Returns:
  * Returns 0 on success, negative errno numbers on failure.

drivers/gpu/drm/drm_connector.c

@@ -852,7 +852,7 @@ DRM_ENUM_NAME_FN(drm_get_content_protection_name, drm_cp_enum_list)
  * PATH:
  * 	Connector path property to identify how this sink is physically
  * 	connected. Used by DP MST. This should be set by calling
- * 	drm_mode_connector_set_path_property(), in the case of DP MST with the
+ * 	drm_connector_set_path_property(), in the case of DP MST with the
  * 	path property the MST manager created. Userspace cannot change this
  * 	property.
  * TILE:
@@ -863,14 +863,14 @@ DRM_ENUM_NAME_FN(drm_get_content_protection_name, drm_cp_enum_list)
  * 	are not gen-locked. Note that for tiled panels which are genlocked, like
  * 	dual-link LVDS or dual-link DSI, the driver should try to not expose the
  * 	tiling and virtualize both &drm_crtc and &drm_plane if needed. Drivers
- * 	should update this value using drm_mode_connector_set_tile_property().
+ * 	should update this value using drm_connector_set_tile_property().
  * 	Userspace cannot change this property.
  * link-status:
  *      Connector link-status property to indicate the status of link. The
  *      default value of link-status is "GOOD". If something fails during or
  *      after modeset, the kernel driver may set this to "BAD" and issue a
  *      hotplug uevent. Drivers should update this value using
- *      drm_mode_connector_set_link_status_property().
+ *      drm_connector_set_link_status_property().
  * non_desktop:
  * 	Indicates the output should be ignored for purposes of displaying a
  * 	standard desktop environment or console. This is most likely because
@@ -1425,7 +1425,7 @@ int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
 EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
 
 /**
- * drm_mode_connector_set_path_property - set tile property on connector
+ * drm_connector_set_path_property - set tile property on connector
  * @connector: connector to set property on.
  * @path: path to use for property; must not be NULL.
  *
@@ -1437,8 +1437,8 @@ EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
  * Returns:
  * Zero on success, negative errno on failure.
  */
-int drm_mode_connector_set_path_property(struct drm_connector *connector,
-					 const char *path)
+int drm_connector_set_path_property(struct drm_connector *connector,
+				    const char *path)
 {
 	struct drm_device *dev = connector->dev;
 	int ret;
@@ -1451,10 +1451,10 @@ int drm_mode_connector_set_path_property(struct drm_connector *connector,
 	                                       dev->mode_config.path_property);
 	return ret;
 }
-EXPORT_SYMBOL(drm_mode_connector_set_path_property);
+EXPORT_SYMBOL(drm_connector_set_path_property);
 
 /**
- * drm_mode_connector_set_tile_property - set tile property on connector
+ * drm_connector_set_tile_property - set tile property on connector
  * @connector: connector to set property on.
  *
  * This looks up the tile information for a connector, and creates a
@@ -1464,7 +1464,7 @@ EXPORT_SYMBOL(drm_mode_connector_set_path_property);
  * Returns:
  * Zero on success, errno on failure.
  */
-int drm_mode_connector_set_tile_property(struct drm_connector *connector)
+int drm_connector_set_tile_property(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
 	char tile[256];
@@ -1494,7 +1494,7 @@ int drm_mode_connector_set_tile_property(struct drm_connector *connector)
 	                                       dev->mode_config.tile_property);
 	return ret;
 }
-EXPORT_SYMBOL(drm_mode_connector_set_tile_property);
+EXPORT_SYMBOL(drm_connector_set_tile_property);
 
 /**
  * drm_connector_update_edid_property - update the edid property of a connector
@@ -1508,7 +1508,7 @@ EXPORT_SYMBOL(drm_mode_connector_set_tile_property);
  * Zero on success, negative errno on failure.
  */
 int drm_connector_update_edid_property(struct drm_connector *connector,
-					    const struct edid *edid)
+				       const struct edid *edid)
 {
 	struct drm_device *dev = connector->dev;
 	size_t size = 0;
@@ -1549,7 +1549,7 @@ int drm_connector_update_edid_property(struct drm_connector *connector,
 EXPORT_SYMBOL(drm_connector_update_edid_property);
 
 /**
- * drm_mode_connector_set_link_status_property - Set link status property of a connector
+ * drm_connector_set_link_status_property - Set link status property of a connector
  * @connector: drm connector
  * @link_status: new value of link status property (0: Good, 1: Bad)
  *
@@ -1567,8 +1567,8 @@ EXPORT_SYMBOL(drm_connector_update_edid_property);
  * it is not limited to DP or link training. For example, if we implement
  * asynchronous setcrtc, this property can be used to report any failures in that.
  */
-void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
-						 uint64_t link_status)
+void drm_connector_set_link_status_property(struct drm_connector *connector,
+					    uint64_t link_status)
 {
 	struct drm_device *dev = connector->dev;
 
@@ -1576,7 +1576,7 @@ void drm_mode_connector_set_link_status_property(struct drm_connector *connector
 	connector->state->link_status = link_status;
 	drm_modeset_unlock(&dev->mode_config.connection_mutex);
 }
-EXPORT_SYMBOL(drm_mode_connector_set_link_status_property);
+EXPORT_SYMBOL(drm_connector_set_link_status_property);
 
 /**
  * drm_connector_init_panel_orientation_property -
@@ -1629,7 +1629,7 @@ int drm_connector_init_panel_orientation_property(
 }
 EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
 
-int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
+int drm_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)
 {
@@ -1647,8 +1647,8 @@ int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
 	return ret;
 }
 
-int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
-				       void *data, struct drm_file *file_priv)
+int drm_connector_property_set_ioctl(struct drm_device *dev,
+				     void *data, struct drm_file *file_priv)
 {
 	struct drm_mode_connector_set_property *conn_set_prop = data;
 	struct drm_mode_obj_set_property obj_set_prop = {

drivers/gpu/drm/drm_crtc_internal.h

@@ -148,7 +148,7 @@ void drm_connector_ida_init(void);
 void drm_connector_ida_destroy(void);
 void drm_connector_unregister_all(struct drm_device *dev);
 int drm_connector_register_all(struct drm_device *dev);
-int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
+int drm_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value);
 int drm_connector_create_standard_properties(struct drm_device *dev);
@@ -156,8 +156,8 @@ const char *drm_get_connector_force_name(enum drm_connector_force force);
 void drm_connector_free_work_fn(struct work_struct *work);
 
 /* IOCTL */
-int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
-					  void *data, struct drm_file *file_priv);
+int drm_connector_property_set_ioctl(struct drm_device *dev,
+				     void *data, struct drm_file *file_priv);
 int drm_mode_getconnector(struct drm_device *dev,
 			  void *data, struct drm_file *file_priv);
 

drivers/gpu/drm/drm_dp_mst_topology.c

@@ -1215,7 +1215,7 @@ static void drm_dp_add_port(struct drm_dp_mst_branch *mstb,
 		     port->pdt == DP_PEER_DEVICE_SST_SINK) &&
 		    port->port_num >= DP_MST_LOGICAL_PORT_0) {
 			port->cached_edid = drm_get_edid(port->connector, &port->aux.ddc);
-			drm_mode_connector_set_tile_property(port->connector);
+			drm_connector_set_tile_property(port->connector);
 		}
 		(*mstb->mgr->cbs->register_connector)(port->connector);
 	}
@@ -2559,7 +2559,7 @@ struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_
 		edid = drm_edid_duplicate(port->cached_edid);
 	else {
 		edid = drm_get_edid(connector, &port->aux.ddc);
-		drm_mode_connector_set_tile_property(connector);
+		drm_connector_set_tile_property(connector);
 	}
 	port->has_audio = drm_detect_monitor_audio(edid);
 	drm_dp_put_port(port);

drivers/gpu/drm/drm_ioctl.c

@@ -641,7 +641,7 @@ static const struct drm_ioctl_desc drm_ioctls[] = {
 	DRM_IOCTL_DEF(DRM_IOCTL_MODE_ATTACHMODE, drm_noop, DRM_MASTER|DRM_UNLOCKED),
 	DRM_IOCTL_DEF(DRM_IOCTL_MODE_DETACHMODE, drm_noop, DRM_MASTER|DRM_UNLOCKED),
 	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPERTY, drm_mode_getproperty_ioctl, DRM_UNLOCKED),
-	DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPROPERTY, drm_mode_connector_property_set_ioctl, DRM_MASTER|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPROPERTY, drm_connector_property_set_ioctl, DRM_MASTER|DRM_UNLOCKED),
 	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPBLOB, drm_mode_getblob_ioctl, DRM_UNLOCKED),
 	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETFB, drm_mode_getfb, DRM_UNLOCKED),
 	DRM_IOCTL_DEF(DRM_IOCTL_MODE_ADDFB, drm_mode_addfb_ioctl, DRM_UNLOCKED),

drivers/gpu/drm/drm_mode_object.c

@@ -433,8 +433,7 @@ static int set_property_legacy(struct drm_mode_object *obj,
 	drm_modeset_lock_all(dev);
 	switch (obj->type) {
 	case DRM_MODE_OBJECT_CONNECTOR:
-		ret = drm_mode_connector_set_obj_prop(obj, prop,
-						      prop_value);
+		ret = drm_connector_set_obj_prop(obj, prop, prop_value);
 		break;
 	case DRM_MODE_OBJECT_CRTC:
 		ret = drm_mode_crtc_set_obj_prop(obj, prop, prop_value);

drivers/gpu/drm/drm_modes.c

@@ -1353,7 +1353,7 @@ void drm_mode_sort(struct list_head *mode_list)
 EXPORT_SYMBOL(drm_mode_sort);
 
 /**
- * drm_mode_connector_list_update - update the mode list for the connector
+ * drm_connector_list_update - update the mode list for the connector
  * @connector: the connector to update
  *
  * This moves the modes from the @connector probed_modes list
@@ -1363,7 +1363,7 @@ EXPORT_SYMBOL(drm_mode_sort);
  * This is just a helper functions doesn't validate any modes itself and also
  * doesn't prune any invalid modes. Callers need to do that themselves.
  */
-void drm_mode_connector_list_update(struct drm_connector *connector)
+void drm_connector_list_update(struct drm_connector *connector)
 {
 	struct drm_display_mode *pmode, *pt;
 
@@ -1412,7 +1412,7 @@ void drm_mode_connector_list_update(struct drm_connector *connector)
 		}
 	}
 }
-EXPORT_SYMBOL(drm_mode_connector_list_update);
+EXPORT_SYMBOL(drm_connector_list_update);
 
 /**
  * drm_mode_parse_command_line_for_connector - parse command line modeline for connector

drivers/gpu/drm/drm_probe_helper.c

@@ -360,7 +360,7 @@ EXPORT_SYMBOL(drm_helper_probe_detect);
  *    using the VESA GTF/CVT formulas.
  *
  * 3. Modes are moved from the probed_modes list to the modes list. Potential
- *    duplicates are merged together (see drm_mode_connector_list_update()).
+ *    duplicates are merged together (see drm_connector_list_update()).
  *    After this step the probed_modes list will be empty again.
  *
  * 4. Any non-stale mode on the modes list then undergoes validation
@@ -485,7 +485,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 	if (count == 0)
 		goto prune;
 
-	drm_mode_connector_list_update(connector);
+	drm_connector_list_update(connector);
 
 	if (connector->interlace_allowed)
 		mode_flags |= DRM_MODE_FLAG_INTERLACE;

drivers/gpu/drm/i915/intel_dp.c

@@ -6320,8 +6320,8 @@ static void intel_dp_modeset_retry_work_fn(struct work_struct *work)
 	/* Set connector link status to BAD and send a Uevent to notify
 	 * userspace to do a modeset.
 	 */
-	drm_mode_connector_set_link_status_property(connector,
-						    DRM_MODE_LINK_STATUS_BAD);
+	drm_connector_set_link_status_property(connector,
+					       DRM_MODE_LINK_STATUS_BAD);
 	mutex_unlock(&connector->dev->mode_config.mutex);
 	/* Send Hotplug uevent so userspace can reprobe */
 	drm_kms_helper_hotplug_event(connector->dev);

drivers/gpu/drm/i915/intel_dp_mst.c

@@ -474,7 +474,7 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
 	drm_object_attach_property(&connector->base, dev->mode_config.path_property, 0);
 	drm_object_attach_property(&connector->base, dev->mode_config.tile_property, 0);
 
-	ret = drm_mode_connector_set_path_property(connector, pathprop);
+	ret = drm_connector_set_path_property(connector, pathprop);
 	if (ret)
 		goto err;
 

drivers/gpu/drm/msm/dsi/dsi_manager.c

@@ -393,7 +393,7 @@ static int dsi_mgr_connector_get_modes(struct drm_connector *connector)
 		ret = dsi_dual_connector_tile_init(connector, id);
 		if (ret)
 			return ret;
-		ret = drm_mode_connector_set_tile_property(connector);
+		ret = drm_connector_set_tile_property(connector);
 		if (ret) {
 			pr_err("%s: set tile property failed, %d\n",
 					__func__, ret);

drivers/gpu/drm/nouveau/dispnv50/disp.c

@@ -931,7 +931,7 @@ nv50_mstc_new(struct nv50_mstm *mstm, struct drm_dp_mst_port *port,
 
 	drm_object_attach_property(&mstc->connector.base, dev->mode_config.path_property, 0);
 	drm_object_attach_property(&mstc->connector.base, dev->mode_config.tile_property, 0);
-	drm_mode_connector_set_path_property(&mstc->connector, path);
+	drm_connector_set_path_property(&mstc->connector, path);
 	return 0;
 }
 

drivers/gpu/drm/radeon/radeon_dp_mst.c

@@ -290,7 +290,7 @@ static struct drm_connector *radeon_dp_add_mst_connector(struct drm_dp_mst_topol
 
 	drm_object_attach_property(&connector->base, dev->mode_config.path_property, 0);
 	drm_object_attach_property(&connector->base, dev->mode_config.tile_property, 0);
-	drm_mode_connector_set_path_property(connector, pathprop);
+	drm_connector_set_path_property(connector, pathprop);
 
 	return connector;
 }

drivers/gpu/drm/vmwgfx/vmwgfx_kms.c

@@ -2114,7 +2114,7 @@ int vmw_du_connector_fill_modes(struct drm_connector *connector,
 		drm_mode_probed_add(connector, mode);
 	}
 
-	drm_mode_connector_list_update(connector);
+	drm_connector_list_update(connector);
 	/* Move the prefered mode first, help apps pick the right mode. */
 	drm_mode_sort(&connector->modes);
 

include/drm/drm_connector.h

@@ -919,7 +919,7 @@ struct drm_connector {
 	 * @path_blob_ptr:
 	 *
 	 * DRM blob property data for the DP MST path property. This should only
-	 * be updated by calling drm_mode_connector_set_path_property().
+	 * be updated by calling drm_connector_set_path_property().
 	 */
 	struct drm_property_blob *path_blob_ptr;
 
@@ -1046,7 +1046,7 @@ struct drm_connector {
 	 * the tiling and virtualize both &drm_crtc and &drm_plane if needed.
 	 *
 	 * This should only be updated by calling
-	 * drm_mode_connector_set_tile_property().
+	 * drm_connector_set_tile_property().
 	 */
 	struct drm_property_blob *tile_blob_ptr;
 
@@ -1191,13 +1191,13 @@ void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame,
 
 int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
 
-int drm_mode_connector_set_path_property(struct drm_connector *connector,
-					 const char *path);
-int drm_mode_connector_set_tile_property(struct drm_connector *connector);
+int drm_connector_set_path_property(struct drm_connector *connector,
+				    const char *path);
+int drm_connector_set_tile_property(struct drm_connector *connector);
 int drm_connector_update_edid_property(struct drm_connector *connector,
 				       const struct edid *edid);
-void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
-						 uint64_t link_status);
+void drm_connector_set_link_status_property(struct drm_connector *connector,
+					    uint64_t link_status);
 int drm_connector_init_panel_orientation_property(
 	struct drm_connector *connector, int width, int height);
 

include/drm/drm_modes.h

@@ -530,7 +530,7 @@ drm_mode_validate_ycbcr420(const struct drm_display_mode *mode,
 void drm_mode_prune_invalid(struct drm_device *dev,
 			    struct list_head *mode_list, bool verbose);
 void drm_mode_sort(struct list_head *mode_list);
-void drm_mode_connector_list_update(struct drm_connector *connector);
+void drm_connector_list_update(struct drm_connector *connector);
 
 /* parsing cmdline modes */
 bool