Merge branch 'pci/host-layerscape' into next

* pci/host-layerscape:
  PCI: layerscape: Add support for ls1088a
  PCI: layerscape: Add support for ls2088a
  PCI: artpec6: Stop enabling writes to DBI read-only registers
  PCI: layerscape: Remove unnecessary class code fixup
  PCI: dwc: Enable write permission for Class Code, Interrupt Pin updates
  PCI: dwc: Add accessors for write permission of DBI read-only registers
  PCI: layerscape: Disable outbound windows configured by bootloader
  PCI: layerscape: Refactor ls1021_pcie_host_init()
  PCI: layerscape: Move generic init functions earlier in file
  PCI: layerscape: Add class code and multifunction fixups for ls1021a
  PCI: layerscape: Move STRFMR1 access out from the DBI write-enable bracket
  PCI: layerscape: Call dw_pcie_setup_rc() from ls_pcie_host_init()

Documentation/devicetree/bindings/pci/layerscape-pci.txt

@@ -15,6 +15,8 @@ Required properties:
 - compatible: should contain the platform identifier such as:
         "fsl,ls1021a-pcie", "snps,dw-pcie"
         "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
+        "fsl,ls2088a-pcie"
+        "fsl,ls1088a-pcie"
         "fsl,ls1046a-pcie"
 - reg: base addresses and lengths of the PCIe controller
 - interrupts: A list of interrupt outputs of the controller. Must contain an

drivers/pci/dwc/pci-layerscape.c

@@ -33,7 +33,8 @@
 
 /* PEX Internal Configuration Registers */
 #define PCIE_STRFMR1		0x71c /* Symbol Timer & Filter Mask Register1 */
-#define PCIE_DBI_RO_WR_EN	0x8bc /* DBI Read-Only Write Enable Register */
+
+#define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {
 	u32 lut_offset;
@@ -72,14 +73,6 @@ static void ls_pcie_clear_multifunction(struct ls_pcie *pcie)
 	iowrite8(PCI_HEADER_TYPE_BRIDGE, pci->dbi_base + PCI_HEADER_TYPE);
 }
 
-/* Fix class value */
-static void ls_pcie_fix_class(struct ls_pcie *pcie)
-{
-	struct dw_pcie *pci = pcie->pci;
-
-	iowrite16(PCI_CLASS_BRIDGE_PCI, pci->dbi_base + PCI_CLASS_DEVICE);
-}
-
 /* Drop MSG TLP except for Vendor MSG */
 static void ls_pcie_drop_msg_tlp(struct ls_pcie *pcie)
 {
@@ -91,6 +84,14 @@ static void ls_pcie_drop_msg_tlp(struct ls_pcie *pcie)
 	iowrite32(val, pci->dbi_base + PCIE_STRFMR1);
 }
 
+static void ls_pcie_disable_outbound_atus(struct ls_pcie *pcie)
+{
+	int i;
+
+	for (i = 0; i < PCIE_IATU_NUM; i++)
+		dw_pcie_disable_atu(pcie->pci, DW_PCIE_REGION_OUTBOUND, i);
+}
+
 static int ls1021_pcie_link_up(struct dw_pcie *pci)
 {
 	u32 state;
@@ -108,37 +109,6 @@ static int ls1021_pcie_link_up(struct dw_pcie *pci)
 	return 1;
 }
 
-static int ls1021_pcie_host_init(struct pcie_port *pp)
-{
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct ls_pcie *pcie = to_ls_pcie(pci);
-	struct device *dev = pci->dev;
-	u32 index[2];
-	int ret;
-
-	pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node,
-						     "fsl,pcie-scfg");
-	if (IS_ERR(pcie->scfg)) {
-		ret = PTR_ERR(pcie->scfg);
-		dev_err(dev, "No syscfg phandle specified\n");
-		pcie->scfg = NULL;
-		return ret;
-	}
-
-	if (of_property_read_u32_array(dev->of_node,
-				       "fsl,pcie-scfg", index, 2)) {
-		pcie->scfg = NULL;
-		return -EINVAL;
-	}
-	pcie->index = index[1];
-
-	dw_pcie_setup_rc(pp);
-
-	ls_pcie_drop_msg_tlp(pcie);
-
-	return 0;
-}
-
 static int ls_pcie_link_up(struct dw_pcie *pci)
 {
 	struct ls_pcie *pcie = to_ls_pcie(pci);
@@ -159,15 +129,51 @@ static int ls_pcie_host_init(struct pcie_port *pp)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct ls_pcie *pcie = to_ls_pcie(pci);
 
-	iowrite32(1, pci->dbi_base + PCIE_DBI_RO_WR_EN);
-	ls_pcie_fix_class(pcie);
+	/*
+	 * Disable outbound windows configured by the bootloader to avoid
+	 * one transaction hitting multiple outbound windows.
+	 * dw_pcie_setup_rc() will reconfigure the outbound windows.
+	 */
+	ls_pcie_disable_outbound_atus(pcie);
+
+	dw_pcie_dbi_ro_wr_en(pci);
 	ls_pcie_clear_multifunction(pcie);
+	dw_pcie_dbi_ro_wr_dis(pci);
+
 	ls_pcie_drop_msg_tlp(pcie);
-	iowrite32(0, pci->dbi_base + PCIE_DBI_RO_WR_EN);
+
+	dw_pcie_setup_rc(pp);
 
 	return 0;
 }
 
+static int ls1021_pcie_host_init(struct pcie_port *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+	struct device *dev = pci->dev;
+	u32 index[2];
+	int ret;
+
+	pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node,
+						     "fsl,pcie-scfg");
+	if (IS_ERR(pcie->scfg)) {
+		ret = PTR_ERR(pcie->scfg);
+		dev_err(dev, "No syscfg phandle specified\n");
+		pcie->scfg = NULL;
+		return ret;
+	}
+
+	if (of_property_read_u32_array(dev->of_node,
+				       "fsl,pcie-scfg", index, 2)) {
+		pcie->scfg = NULL;
+		return -EINVAL;
+	}
+	pcie->index = index[1];
+
+	return ls_pcie_host_init(pp);
+}
+
 static int ls_pcie_msi_host_init(struct pcie_port *pp,
 				 struct msi_controller *chip)
 {
@@ -238,12 +244,22 @@ static struct ls_pcie_drvdata ls2080_drvdata = {
 	.dw_pcie_ops = &dw_ls_pcie_ops,
 };
 
+static struct ls_pcie_drvdata ls2088_drvdata = {
+	.lut_offset = 0x80000,
+	.ltssm_shift = 0,
+	.lut_dbg = 0x407fc,
+	.ops = &ls_pcie_host_ops,
+	.dw_pcie_ops = &dw_ls_pcie_ops,
+};
+
 static const struct of_device_id ls_pcie_of_match[] = {
 	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata },
 	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata },
 	{ .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata },
 	{ .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
 	{ .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
+	{ .compatible = "fsl,ls2088a-pcie", .data = &ls2088_drvdata },
+	{ .compatible = "fsl,ls1088a-pcie", .data = &ls2088_drvdata },
 	{ },
 };
 

drivers/pci/dwc/pcie-artpec6.c

@@ -141,12 +141,6 @@ static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
 	artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
 	usleep_range(100, 200);
 
-	/*
-	 * Enable writing to config regs. This is required as the Synopsys
-	 * driver changes the class code. That register needs DBI write enable.
-	 */
-	dw_pcie_writel_dbi(pci, MISC_CONTROL_1_OFF, DBI_RO_WR_EN);
-
 	/* setup root complex */
 	dw_pcie_setup_rc(pp);
 

drivers/pci/dwc/pcie-designware-host.c

@@ -597,10 +597,12 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 	dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_1, 0x00000000);
 
 	/* setup interrupt pins */
+	dw_pcie_dbi_ro_wr_en(pci);
 	val = dw_pcie_readl_dbi(pci, PCI_INTERRUPT_LINE);
 	val &= 0xffff00ff;
 	val |= 0x00000100;
 	dw_pcie_writel_dbi(pci, PCI_INTERRUPT_LINE, val);
+	dw_pcie_dbi_ro_wr_dis(pci);
 
 	/* setup bus numbers */
 	val = dw_pcie_readl_dbi(pci, PCI_PRIMARY_BUS);
@@ -637,8 +639,12 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 
 	dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
 
+	/* Enable write permission for the DBI read-only register */
+	dw_pcie_dbi_ro_wr_en(pci);
 	/* program correct class for RC */
 	dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
+	/* Better disable write permission right after the update */
+	dw_pcie_dbi_ro_wr_dis(pci);
 
 	dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
 	val |= PORT_LOGIC_SPEED_CHANGE;

drivers/pci/dwc/pcie-designware.h

@@ -76,6 +76,9 @@
 #define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
 #define PCIE_ATU_UPPER_TARGET		0x91C
 
+#define PCIE_MISC_CONTROL_1_OFF		0x8BC
+#define PCIE_DBI_RO_WR_EN		(0x1 << 0)
+
 /*
  * iATU Unroll-specific register definitions
  * From 4.80 core version the address translation will be made by unroll
@@ -279,6 +282,28 @@ static inline u32 dw_pcie_readl_dbi2(struct dw_pcie *pci, u32 reg)
 	return __dw_pcie_read_dbi(pci, pci->dbi_base2, reg, 0x4);
 }
 
+static inline void dw_pcie_dbi_ro_wr_en(struct dw_pcie *pci)
+{
+	u32 reg;
+	u32 val;
+
+	reg = PCIE_MISC_CONTROL_1_OFF;
+	val = dw_pcie_readl_dbi(pci, reg);
+	val |= PCIE_DBI_RO_WR_EN;
+	dw_pcie_writel_dbi(pci, reg, val);
+}
+
+static inline void dw_pcie_dbi_ro_wr_dis(struct dw_pcie *pci)
+{
+	u32 reg;
+	u32 val;
+
+	reg = PCIE_MISC_CONTROL_1_OFF;
+	val = dw_pcie_readl_dbi(pci, reg);
+	val &= ~PCIE_DBI_RO_WR_EN;
+	dw_pcie_writel_dbi(pci, reg, val);
+}
+
 #ifdef CONFIG_PCIE_DW_HOST
 irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
 void dw_pcie_msi_init(struct pcie_port *pp);