bnx2x: Support DCBX for all functions

In multi-function device, allow configuring dcbx admin params from all drivers
on a single physical port.
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

@@ -1318,6 +1318,7 @@ struct bnx2x {
 #define NO_FCOE_FLAG			(1 << 15)
 #define BC_SUPPORTS_PFC_STATS		(1 << 17)
 #define USING_SINGLE_MSIX_FLAG		(1 << 20)
+#define BC_SUPPORTS_DCBX_MSG_NON_PMF	(1 << 21)
 
 #define NO_ISCSI(bp)		((bp)->flags & NO_ISCSI_FLAG)
 #define NO_ISCSI_OOO(bp)	((bp)->flags & NO_ISCSI_OOO_FLAG)

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

@@ -2274,8 +2274,10 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		return -EBUSY;
 	}
 
-	if (bp->state != BNX2X_STATE_DIAG)
-		bnx2x_dcbx_init(bp);
+	/* If PMF - send ADMIN DCBX msg to MFW to initiate DCBX FSM */
+	if (bp->port.pmf && (bp->state != BNX2X_STATE_DIAG))
+		bnx2x_dcbx_init(bp, false);
+
 	return 0;
 
 #ifndef BNX2X_STOP_ON_ERROR

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h

@@ -418,7 +418,7 @@ void bnx2x_ilt_set_info(struct bnx2x *bp);
  *
  * @bp:		driver handle
  */
-void bnx2x_dcbx_init(struct bnx2x *bp);
+void bnx2x_dcbx_init(struct bnx2x *bp, bool update_shmem);
 
 /**
  * bnx2x_set_power_state - set power state to the requested value.

drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c

@@ -972,23 +972,26 @@ void bnx2x_dcbx_init_params(struct bnx2x *bp)
 	bp->dcbx_config_params.admin_default_priority = 0;
 }
 
-void bnx2x_dcbx_init(struct bnx2x *bp)
+void bnx2x_dcbx_init(struct bnx2x *bp, bool update_shmem)
 {
 	u32 dcbx_lldp_params_offset = SHMEM_LLDP_DCBX_PARAMS_NONE;
 
+	/* only PMF can send ADMIN msg to MFW in old MFW versions */
+	if ((!bp->port.pmf) && (!(bp->flags & BC_SUPPORTS_DCBX_MSG_NON_PMF)))
+		return;
+
 	if (bp->dcbx_enabled <= 0)
 		return;
 
 	/* validate:
 	 * chip of good for dcbx version,
 	 * dcb is wanted
-	 * the function is pmf
 	 * shmem2 contains DCBX support fields
 	 */
 	DP(BNX2X_MSG_DCB, "dcb_state %d bp->port.pmf %d\n",
 	   bp->dcb_state, bp->port.pmf);
 
-	if (bp->dcb_state == BNX2X_DCB_STATE_ON && bp->port.pmf &&
+	if (bp->dcb_state == BNX2X_DCB_STATE_ON &&
 	    SHMEM2_HAS(bp, dcbx_lldp_params_offset)) {
 		dcbx_lldp_params_offset =
 			SHMEM2_RD(bp, dcbx_lldp_params_offset);
@@ -999,12 +1002,23 @@ void bnx2x_dcbx_init(struct bnx2x *bp)
 		bnx2x_update_drv_flags(bp, 1 << DRV_FLAGS_DCB_CONFIGURED, 0);
 
 		if (SHMEM_LLDP_DCBX_PARAMS_NONE != dcbx_lldp_params_offset) {
-			bnx2x_dcbx_admin_mib_updated_params(bp,
-				dcbx_lldp_params_offset);
+			/* need HW lock to avoid scenario of two drivers
+			 * writing in parallel to shmem
+			 */
+			bnx2x_acquire_hw_lock(bp,
+					      HW_LOCK_RESOURCE_DCBX_ADMIN_MIB);
+			if (update_shmem)
+				bnx2x_dcbx_admin_mib_updated_params(bp,
+					dcbx_lldp_params_offset);
 
 			/* Let HW start negotiation */
 			bnx2x_fw_command(bp,
 					 DRV_MSG_CODE_DCBX_ADMIN_PMF_MSG, 0);
+			/* release HW lock only after MFW acks that it finished
+			 * reading values from shmem
+			 */
+			bnx2x_release_hw_lock(bp,
+					      HW_LOCK_RESOURCE_DCBX_ADMIN_MIB);
 		}
 	}
 }
@@ -2063,10 +2077,8 @@ static u8 bnx2x_dcbnl_set_all(struct net_device *netdev)
 			   "Handling parity error recovery. Try again later\n");
 		return 1;
 	}
-	if (netif_running(bp->dev)) {
-		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
-		rc = bnx2x_nic_load(bp, LOAD_NORMAL);
-	}
+	if (netif_running(bp->dev))
+		bnx2x_dcbx_init(bp, true);
 	DP(BNX2X_MSG_DCB, "set_dcbx_params done (%d)\n", rc);
 	if (rc)
 		return 1;

drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h

@@ -1253,6 +1253,7 @@ struct drv_func_mb {
 
 	#define DRV_MSG_CODE_DCBX_ADMIN_PMF_MSG         0xb0000000
 	#define DRV_MSG_CODE_DCBX_PMF_DRV_OK            0xb2000000
+	#define REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF     0x00070401
 
 	#define DRV_MSG_CODE_VF_DISABLED_DONE           0xc0000000
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -9732,6 +9732,8 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
 	bp->flags |= (val >= REQ_BC_VER_4_PFC_STATS_SUPPORTED) ?
 			BC_SUPPORTS_PFC_STATS : 0;
 
+	bp->flags |= (val >= REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF) ?
+			BC_SUPPORTS_DCBX_MSG_NON_PMF : 0;
 	boot_mode = SHMEM_RD(bp,
 			dev_info.port_feature_config[BP_PORT(bp)].mba_config) &
 			PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK;

drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h

@@ -5913,6 +5913,7 @@
 #define MISC_REGISTERS_SPIO_OUTPUT_LOW				 0
 #define MISC_REGISTERS_SPIO_SET_POS				 8
 #define HW_LOCK_MAX_RESOURCE_VALUE				 31
+#define HW_LOCK_RESOURCE_DCBX_ADMIN_MIB				 13
 #define HW_LOCK_RESOURCE_DRV_FLAGS				 10
 #define HW_LOCK_RESOURCE_GPIO					 1
 #define HW_LOCK_RESOURCE_MDIO					 0