Skip to content

L
linux
Commit 98da3529 authored by Linus Walleij's avatar Linus Walleij Committed by Linus Walleij
Browse files
Options

pinctrl: add a driver for the U300 pinmux 

This adds a driver for the U300 pinmux portions of the system
controller "SYSCON". It also serves as an example of how to use
the pinmux subsystem. This driver also houses the platform data
for the only supported platform.

This deletes the old U300 driver in arch/arm/mach-u300 and
replace it with a driver using the new subsystem.

The new driver is considerably fatter than the old one, but it
also registers all 467 pins of the system and adds the power
and EMIF pin groups and corresponding functions. The idea
is to use this driver as a a reference for other
implementation so it needs to be as complete and verbose
as possible.
Reviewed-by: default avatarBarry Song <21cnbao@gmail.com>
[Fixup for changed function names and semantics in the v10 patch]
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 2744e8af
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1228 additions and 581 deletions
arch/arm/mach-u300/Kconfig
View file @ 98da3529
......@@ -6,6 +6,8 @@ comment "ST-Ericsson Mobile Platform Products"
config MACH_U300
bool "U300"
select PINCTRL
select PINMUX_U300
comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
......
arch/arm/mach-u300/Makefile
View file @ 98da3529
......@@ -2,7 +2,7 @@
# Makefile for the linux kernel, U300 machine.
#
obj-y := core.o clock.o timer.o padmux.o
obj-y := core.o clock.o timer.o
obj-m :=
obj-n :=
obj- :=
......
arch/arm/mach-u300/core.c
View file @ 98da3529
......@@ -25,6 +25,8 @@
#include <linux/err.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/fsmc.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinmux.h>
#include <asm/types.h>
#include <asm/setup.h>
......@@ -1535,6 +1537,14 @@ static struct coh901318_platform coh901318_platform = {
.max_channels = U300_DMA_CHANNELS,
};
static struct resource pinmux_resources[] = {
{
.start = U300_SYSCON_BASE,
.end = U300_SYSCON_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device wdog_device = {
.name = "coh901327_wdog",
.id = -1,
......@@ -1630,6 +1640,72 @@ static struct platform_device dma_device = {
},
};
static struct platform_device pinmux_device = {
.name = "pinmux-u300",
.id = -1,
.num_resources = ARRAY_SIZE(pinmux_resources),
.resource = pinmux_resources,
};
/* Pinmux settings */
static struct pinmux_map u300_pinmux_map[] = {
/* anonymous maps for chip power and EMIFs */
PINMUX_MAP_PRIMARY_SYS_HOG("POWER", "power"),
PINMUX_MAP_PRIMARY_SYS_HOG("EMIF0", "emif0"),
PINMUX_MAP_PRIMARY_SYS_HOG("EMIF1", "emif1"),
/* per-device maps for MMC/SD, SPI and UART */
PINMUX_MAP_PRIMARY("MMCSD", "mmc0", "mmci"),
PINMUX_MAP_PRIMARY("SPI", "spi0", "pl022"),
PINMUX_MAP_PRIMARY("UART0", "uart0", "uart0"),
};
struct u300_mux_hog {
const char *name;
struct device *dev;
struct pinmux *pmx;
};
static struct u300_mux_hog u300_mux_hogs[] = {
{
.name = "uart0",
.dev = &uart0_device.dev,
},
{
.name = "spi0",
.dev = &pl022_device.dev,
},
{
.name = "mmc0",
.dev = &mmcsd_device.dev,
},
};
static int __init u300_pinmux_fetch(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) {
struct pinmux *pmx;
int ret;
pmx = pinmux_get(u300_mux_hogs[i].dev, NULL);
if (IS_ERR(pmx)) {
pr_err("u300: could not get pinmux hog %s\n",
u300_mux_hogs[i].name);
continue;
}
ret = pinmux_enable(pmx);
if (ret) {
pr_err("u300: could enable pinmux hog %s\n",
u300_mux_hogs[i].name);
continue;
}
u300_mux_hogs[i].pmx = pmx;
}
return 0;
}
subsys_initcall(u300_pinmux_fetch);
/*
* Notice that AMBA devices are initialized before platform devices.
*
......@@ -1643,10 +1719,10 @@ static struct platform_device *platform_devs[] __initdata = {
&gpio_device,
&nand_device,
&wdog_device,
&ave_device
&ave_device,
&pinmux_device,
};
/*
* Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
* together so some interrupts are connected to the first one and some
......@@ -1828,6 +1904,10 @@ void __init u300_init_devices(void)
u300_assign_physmem();
/* Initialize pinmuxing */
pinmux_register_mappings(u300_pinmux_map,
ARRAY_SIZE(u300_pinmux_map));
/* Register subdevices on the I2C buses */
u300_i2c_register_board_devices();
......
arch/arm/mach-u300/include/mach/syscon.h
View file @ 98da3529
......@@ -234,91 +234,6 @@
#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004)
#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002)
#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001)
/* PAD MUX Control register 1 (LOW) 16bit (R/W) */
#define U300_SYSCON_PMC1LR (0x007C)
#define U300_SYSCON_PMC1LR_MASK (0xFFFF)
#define U300_SYSCON_PMC1LR_CDI_MASK (0xC000)
#define U300_SYSCON_PMC1LR_CDI_CDI (0x0000)
#define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000)
#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_PMC1LR_CDI_CDI2 (0x8000)
#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO (0xC000)
#elif CONFIG_MACH_U300_BS365
#define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000)
#define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000)
#endif
#define U300_SYSCON_PMC1LR_PDI_MASK (0x3000)
#define U300_SYSCON_PMC1LR_PDI_PDI (0x0000)
#define U300_SYSCON_PMC1LR_PDI_EGG (0x1000)
#define U300_SYSCON_PMC1LR_PDI_WCDMA (0x3000)
#define U300_SYSCON_PMC1LR_MMCSD_MASK (0x0C00)
#define U300_SYSCON_PMC1LR_MMCSD_MMCSD (0x0000)
#define U300_SYSCON_PMC1LR_MMCSD_MSPRO (0x0400)
#define U300_SYSCON_PMC1LR_MMCSD_DSP (0x0800)
#define U300_SYSCON_PMC1LR_MMCSD_WCDMA (0x0C00)
#define U300_SYSCON_PMC1LR_ETM_MASK (0x0300)
#define U300_SYSCON_PMC1LR_ETM_ACC (0x0000)
#define U300_SYSCON_PMC1LR_ETM_APP (0x0100)
#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK (0x00C0)
#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC (0x0000)
#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF (0x0040)
#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM (0x0080)
#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB (0x00C0)
#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK (0x0030)
#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC (0x0000)
#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF (0x0010)
#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM (0x0020)
#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI (0x0030)
#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK (0x000C)
#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC (0x0000)
#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF (0x0004)
#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM (0x0008)
#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI (0x000C)
#define U300_SYSCON_PMC1LR_EMIF_1_MASK (0x0003)
#define U300_SYSCON_PMC1LR_EMIF_1_STATIC (0x0000)
#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 (0x0001)
#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 (0x0002)
#define U300_SYSCON_PMC1LR_EMIF_1 (0x0003)
/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */
#define U300_SYSCON_PMC1HR (0x007E)
#define U300_SYSCON_PMC1HR_MASK (0xFFFF)
#define U300_SYSCON_PMC1HR_MISC_2_MASK (0xC000)
#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO (0x0000)
#define U300_SYSCON_PMC1HR_MISC_2_MSPRO (0x4000)
#define U300_SYSCON_PMC1HR_MISC_2_DSP (0x8000)
#define U300_SYSCON_PMC1HR_MISC_2_AAIF (0xC000)
#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK (0x3000)
#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO (0x0000)
#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF (0x1000)
#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP (0x2000)
#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF (0x3000)
#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK (0x0C00)
#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO (0x0000)
#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC (0x0400)
#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP (0x0800)
#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF (0x0C00)
#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK (0x0300)
#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO (0x0000)
#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI (0x0100)
#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF (0x0300)
#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK (0x00C0)
#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO (0x0000)
#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI (0x0040)
#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF (0x00C0)
#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK (0x0030)
#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO (0x0000)
#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI (0x0010)
#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP (0x0020)
#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF (0x0030)
#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK (0x000C)
#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO (0x0000)
#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 (0x0004)
#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS (0x0008)
#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF (0x000C)
#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK (0x0003)
#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO (0x0000)
#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 (0x0001)
#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF (0x0003)
/* Step one for killing the applications system 16bit (-/W) */
#define U300_SYSCON_KA1R (0x0080)
#define U300_SYSCON_KA1R_MASK (0xFFFF)
......@@ -357,57 +272,6 @@
#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080)
#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040)
#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F)
/* Padmux 2 control */
#define U300_SYSCON_PMC2R (0x100)
#define U300_SYSCON_PMC2R_APP_MISC_0_MASK (0x00C0)
#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO (0x0000)
#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM (0x0040)
#define U300_SYSCON_PMC2R_APP_MISC_0_MMC (0x0080)
#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 (0x00C0)
#define U300_SYSCON_PMC2R_APP_MISC_1_MASK (0x0300)
#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO (0x0000)
#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM (0x0100)
#define U300_SYSCON_PMC2R_APP_MISC_1_MMC (0x0200)
#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 (0x0300)
#define U300_SYSCON_PMC2R_APP_MISC_2_MASK (0x0C00)
#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO (0x0000)
#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM (0x0400)
#define U300_SYSCON_PMC2R_APP_MISC_2_MMC (0x0800)
#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 (0x0C00)
#define U300_SYSCON_PMC2R_APP_MISC_3_MASK (0x3000)
#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO (0x0000)
#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM (0x1000)
#define U300_SYSCON_PMC2R_APP_MISC_3_MMC (0x2000)
#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 (0x3000)
#define U300_SYSCON_PMC2R_APP_MISC_4_MASK (0xC000)
#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO (0x0000)
#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM (0x4000)
#define U300_SYSCON_PMC2R_APP_MISC_4_MMC (0x8000)
#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO (0xC000)
/* TODO: More SYSCON registers missing */
#define U300_SYSCON_PMC3R (0x10c)
#define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000)
#define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000)
#define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000)
#define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000)
/* TODO: Missing other configs */
#define U300_SYSCON_PMC4R (0x168)
#define U300_SYSCON_PMC4R_APP_MISC_12_MASK (0x0003)
#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO (0x0000)
#define U300_SYSCON_PMC4R_APP_MISC_13_MASK (0x000C)
#define U300_SYSCON_PMC4R_APP_MISC_13_CDI (0x0000)
#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA (0x0004)
#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 (0x0008)
#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO (0x000C)
#define U300_SYSCON_PMC4R_APP_MISC_14_MASK (0x0030)
#define U300_SYSCON_PMC4R_APP_MISC_14_CDI (0x0000)
#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA (0x0010)
#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 (0x0020)
#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO (0x0030)
#define U300_SYSCON_PMC4R_APP_MISC_16_MASK (0x0300)
#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 (0x0000)
#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS (0x0100)
#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N (0x0200)
/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
#define U300_SYSCON_S0CCR (0x120)
#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF)
......
arch/arm/mach-u300/mmc.c
View file @ 98da3529
......@@ -21,7 +21,6 @@
#include <mach/dma_channels.h>
#include "mmc.h"
#include "padmux.h"
static struct mmci_platform_data mmc0_plat_data = {
/*
......@@ -45,24 +44,9 @@ static struct mmci_platform_data mmc0_plat_data = {
int __devinit mmc_init(struct amba_device *adev)
{
struct device *mmcsd_device = &adev->dev;
struct pmx *pmx;
int ret = 0;
mmcsd_device->platform_data = &mmc0_plat_data;
/*
* Setup padmuxing for MMC. Since this must always be
* compiled into the kernel, pmx is never released.
*/
pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING);
if (IS_ERR(pmx))
pr_warning("Could not get padmux handle\n");
else {
ret = pmx_activate(mmcsd_device, pmx);
if (IS_ERR_VALUE(ret))
pr_warning("Could not activate padmuxing\n");
}
return ret;
}
arch/arm/mach-u300/padmux.c deleted 100644 → 0
View file @ 2744e8af
/*
*
* arch/arm/mach-u300/padmux.c
*
*
* Copyright (C) 2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* U300 PADMUX functions
* Author: Martin Persson <martin.persson@stericsson.com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/mutex.h>
#include <linux/string.h>
#include <linux/bug.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <mach/u300-regs.h>
#include <mach/syscon.h>
#include "padmux.h"
static DEFINE_MUTEX(pmx_mutex);
const u32 pmx_registers[] = {
(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR),
(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR),
(U300_SYSCON_VBASE + U300_SYSCON_PMC2R),
(U300_SYSCON_VBASE + U300_SYSCON_PMC3R),
(U300_SYSCON_VBASE + U300_SYSCON_PMC4R)
};
/* High level functionality */
/* Lazy dog:
* onmask = {
* {"PMC1LR" mask, "PMC1LR" value},
* {"PMC1HR" mask, "PMC1HR" value},
* {"PMC2R" mask, "PMC2R" value},
* {"PMC3R" mask, "PMC3R" value},
* {"PMC4R" mask, "PMC4R" value}
* }
*/
static struct pmx mmc_setting = {
.setting = U300_APP_PMX_MMC_SETTING,
.default_on = false,
.activated = false,
.name = "MMC",
.onmask = {
{U300_SYSCON_PMC1LR_MMCSD_MASK,
U300_SYSCON_PMC1LR_MMCSD_MMCSD},
{0, 0},
{0, 0},
{0, 0},
{U300_SYSCON_PMC4R_APP_MISC_12_MASK,
U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO}
},
};
static struct pmx spi_setting = {
.setting = U300_APP_PMX_SPI_SETTING,
.default_on = false,
.activated = false,
.name = "SPI",
.onmask = {{0, 0},
{U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI},
{0, 0},
{0, 0},
{0, 0}
},
};
/* Available padmux settings */
static struct pmx *pmx_settings[] = {
&mmc_setting,
&spi_setting,
};
static void update_registers(struct pmx *pmx, bool activate)
{
u16 regval, val, mask;
int i;
for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) {
if (activate)
val = pmx->onmask[i].val;
else
val = 0;
mask = pmx->onmask[i].mask;
if (mask != 0) {
regval = readw(pmx_registers[i]);
regval &= ~mask;
regval |= val;
writew(regval, pmx_registers[i]);
}
}
}
struct pmx *pmx_get(struct device *dev, enum pmx_settings setting)
{
int i;
struct pmx *pmx = ERR_PTR(-ENOENT);
if (dev == NULL)
return ERR_PTR(-EINVAL);
mutex_lock(&pmx_mutex);
for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
if (setting == pmx_settings[i]->setting) {
if (pmx_settings[i]->dev != NULL) {
WARN(1, "padmux: required setting "
"in use by another consumer\n");
} else {
pmx = pmx_settings[i];
pmx->dev = dev;
dev_dbg(dev, "padmux: setting nr %d is now "
"bound to %s and ready to use\n",
setting, dev_name(dev));
break;
}
}
}
mutex_unlock(&pmx_mutex);
return pmx;
}
EXPORT_SYMBOL(pmx_get);
int pmx_put(struct device *dev, struct pmx *pmx)
{
int i;
int ret = -ENOENT;
if (pmx == NULL || dev == NULL)
return -EINVAL;
mutex_lock(&pmx_mutex);
for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
if (pmx->setting == pmx_settings[i]->setting) {
if (dev != pmx->dev) {
WARN(1, "padmux: cannot release handle as "
"it is bound to another consumer\n");
ret = -EINVAL;
break;
} else {
pmx_settings[i]->dev = NULL;
ret = 0;
break;
}
}
}
mutex_unlock(&pmx_mutex);
return ret;
}
EXPORT_SYMBOL(pmx_put);
int pmx_activate(struct device *dev, struct pmx *pmx)
{
int i, j, ret;
ret = 0;
if (pmx == NULL || dev == NULL)
return -EINVAL;
mutex_lock(&pmx_mutex);
/* Make sure the required bits are not used */
for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx)
continue;
for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
if (pmx_settings[i]->onmask[j].mask & pmx->
onmask[j].mask) {
/* More than one entry on the same bits */
WARN(1, "padmux: cannot activate "
"setting. Bit conflict with "
"an active setting\n");
ret = -EUSERS;
goto exit;
}
}
}
update_registers(pmx, true);
pmx->activated = true;
dev_dbg(dev, "padmux: setting nr %d is activated\n",
pmx->setting);
exit:
mutex_unlock(&pmx_mutex);
return ret;
}
EXPORT_SYMBOL(pmx_activate);
int pmx_deactivate(struct device *dev, struct pmx *pmx)
{
int i;
int ret = -ENOENT;
if (pmx == NULL || dev == NULL)
return -EINVAL;
mutex_lock(&pmx_mutex);
for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
if (pmx_settings[i]->dev == NULL)
continue;
if (pmx->setting == pmx_settings[i]->setting) {
if (dev != pmx->dev) {
WARN(1, "padmux: cannot deactivate "
"pmx setting as it was activated "
"by another consumer\n");
ret = -EBUSY;
continue;
} else {
update_registers(pmx, false);
pmx_settings[i]->dev = NULL;
pmx->activated = false;
ret = 0;
dev_dbg(dev, "padmux: setting nr %d is deactivated",
pmx->setting);
break;
}
}
}
mutex_unlock(&pmx_mutex);
return ret;
}
EXPORT_SYMBOL(pmx_deactivate);
/*
* For internal use only. If it is to be exported,
* it should be reentrant. Notice that pmx_activate
* (i.e. runtime settings) always override default settings.
*/
static int pmx_set_default(void)
{
/* Used to identify several entries on the same bits */
u16 modbits[ARRAY_SIZE(pmx_registers)];
int i, j;
memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16));
for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
if (!pmx_settings[i]->default_on)
continue;
for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
/* Make sure there is only one entry on the same bits */
if (modbits[j] & pmx_settings[i]->onmask[j].mask) {
BUG();
return -EUSERS;
}
modbits[j] |= pmx_settings[i]->onmask[j].mask;
}
update_registers(pmx_settings[i], true);
}
return 0;
}
#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
static int pmx_show(struct seq_file *s, void *data)
{
int i;
seq_printf(s, "-------------------------------------------------\n");
seq_printf(s, "SETTING BOUND TO DEVICE STATE\n");
seq_printf(s, "-------------------------------------------------\n");
mutex_lock(&pmx_mutex);
for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
/* Format pmx and device name nicely */
char cdp[33];
int chars;
chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name);
while (chars < 16) {
cdp[chars] = ' ';
chars++;
}
chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ?
dev_name(pmx_settings[i]->dev) : "N/A");
while (chars < 16) {
cdp[chars+16] = ' ';
chars++;
}
cdp[32] = '\0';
seq_printf(s,
"%s\t%s\n",
&cdp[0],
pmx_settings[i]->activated ?
"ACTIVATED" : "DEACTIVATED"
);
}
mutex_unlock(&pmx_mutex);
return 0;
}
static int pmx_open(struct inode *inode, struct file *file)
{
return single_open(file, pmx_show, NULL);
}
static const struct file_operations pmx_operations = {
.owner = THIS_MODULE,
.open = pmx_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int __init init_pmx_read_debugfs(void)
{
/* Expose a simple debugfs interface to view pmx settings */
(void) debugfs_create_file("padmux", S_IFREG | S_IRUGO,
NULL, NULL,
&pmx_operations);
return 0;
}
/*
* This needs to come in after the core_initcall(),
* because debugfs is not available until
* the subsystems come up.
*/
module_init(init_pmx_read_debugfs);
#endif
static int __init pmx_init(void)
{
int ret;
ret = pmx_set_default();
if (IS_ERR_VALUE(ret))
pr_crit("padmux: default settings could not be set\n");
return 0;
}
/* Should be initialized before consumers */
core_initcall(pmx_init);
arch/arm/mach-u300/padmux.h deleted 100644 → 0
View file @ 2744e8af
/*
*
* arch/arm/mach-u300/padmux.h
*
*
* Copyright (C) 2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* U300 PADMUX API
* Author: Martin Persson <martin.persson@stericsson.com>
*/
#ifndef __MACH_U300_PADMUX_H
#define __MACH_U300_PADMUX_H
enum pmx_settings {
U300_APP_PMX_MMC_SETTING,
U300_APP_PMX_SPI_SETTING
};
struct pmx_onmask {
u16 mask; /* Mask bits */
u16 val; /* Value when active */
};
struct pmx {
struct device *dev;
enum pmx_settings setting;
char *name;
bool activated;
bool default_on;
struct pmx_onmask onmask[];
};
struct pmx *pmx_get(struct device *dev, enum pmx_settings setting);
int pmx_put(struct device *dev, struct pmx *pmx);
int pmx_activate(struct device *dev, struct pmx *pmx);
int pmx_deactivate(struct device *dev, struct pmx *pmx);
#endif
arch/arm/mach-u300/spi.c
View file @ 98da3529
......@@ -14,8 +14,6 @@
#include <mach/coh901318.h>
#include <mach/dma_channels.h>
#include "padmux.h"
/*
* The following is for the actual devices on the SSP/SPI bus
*/
......@@ -95,25 +93,7 @@ static struct pl022_ssp_controller ssp_platform_data = {
void __init u300_spi_init(struct amba_device *adev)
{
struct pmx *pmx;
adev->dev.platform_data = &ssp_platform_data;
/*
* Setup padmuxing for SPI. Since this must always be
* compiled into the kernel, pmx is never released.
*/
pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING);
if (IS_ERR(pmx))
dev_warn(&adev->dev, "Could not get padmux handle\n");
else {
int ret;
ret = pmx_activate(&adev->dev, pmx);
if (IS_ERR_VALUE(ret))
dev_warn(&adev->dev, "Could not activate padmuxing\n");
}
}
void __init u300_spi_register_board_devices(void)
......
drivers/pinctrl/Kconfig
View file @ 98da3529
......@@ -26,4 +26,11 @@ config DEBUG_PINCTRL
help
Say Y here to add some extra checks and diagnostics to PINCTRL calls.
config PINMUX_U300
bool "U300 pinmux driver"
depends on ARCH_U300
select PINMUX
help
Say Y here to enable the U300 pinmux driver
endif
drivers/pinctrl/Makefile
View file @ 98da3529
......@@ -4,3 +4,4 @@ ccflags-$(CONFIG_DEBUG_PINMUX) += -DDEBUG
obj-$(CONFIG_PINCTRL) += core.o
obj-$(CONFIG_PINMUX) += pinmux.o
obj-$(CONFIG_PINMUX_U300) += pinmux-u300.o
drivers/pinctrl/pinmux-u300.c 0 → 100644
View file @ 98da3529
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7