Commit 98efd694 authored by Alexander Duyck's avatar Alexander Duyck Committed by Jeff Kirsher

i40e/i40evf: Add support for using order 1 pages with a 3K buffer

There are situations where adding padding to the front and back of an Rx
buffer will require that we add additional padding.  Specifically if
NET_IP_ALIGN is non-zero, or the MTU size is larger than 7.5K we would need
to use 2K buffers which leaves us with no room for the padding.

To preemptively address these cases I am adding support for 3K buffers to
the Rx path so that we can provide the additional padding needed in the
event of NET_IP_ALIGN being non-zero or a cache line being greater than 64.

Change-ID: I938bc1ba611285428df39a613cd66f98e60b55c7
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 33512191
......@@ -3085,7 +3085,8 @@ static int i40e_vsi_configure_rx(struct i40e_vsi *vsi)
#endif
} else {
vsi->max_frame = I40E_MAX_RXBUFFER;
vsi->rx_buf_len = I40E_RXBUFFER_2048;
vsi->rx_buf_len = (PAGE_SIZE < 8192) ? I40E_RXBUFFER_3072 :
I40E_RXBUFFER_2048;
}
/* set up individual rings */
......
......@@ -1138,14 +1138,15 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring)
dma_sync_single_range_for_cpu(rx_ring->dev,
rx_bi->dma,
rx_bi->page_offset,
I40E_RXBUFFER_2048,
rx_ring->rx_buf_len,
DMA_FROM_DEVICE);
/* free resources associated with mapping */
dma_unmap_page_attrs(rx_ring->dev, rx_bi->dma,
PAGE_SIZE,
i40e_rx_pg_size(rx_ring),
DMA_FROM_DEVICE,
I40E_RX_DMA_ATTR);
__page_frag_cache_drain(rx_bi->page, rx_bi->pagecnt_bias);
rx_bi->page = NULL;
......@@ -1267,7 +1268,7 @@ static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring,
}
/* alloc new page for storage */
page = dev_alloc_page();
page = dev_alloc_pages(i40e_rx_pg_order(rx_ring));
if (unlikely(!page)) {
rx_ring->rx_stats.alloc_page_failed++;
return false;
......@@ -1275,7 +1276,7 @@ static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring,
/* map page for use */
dma = dma_map_page_attrs(rx_ring->dev, page, 0,
PAGE_SIZE,
i40e_rx_pg_size(rx_ring),
DMA_FROM_DEVICE,
I40E_RX_DMA_ATTR);
......@@ -1283,7 +1284,7 @@ static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring,
* there isn't much point in holding memory we can't use
*/
if (dma_mapping_error(rx_ring->dev, dma)) {
__free_pages(page, 0);
__free_pages(page, i40e_rx_pg_order(rx_ring));
rx_ring->rx_stats.alloc_page_failed++;
return false;
}
......@@ -1343,7 +1344,7 @@ bool i40e_alloc_rx_buffers(struct i40e_ring *rx_ring, u16 cleaned_count)
/* sync the buffer for use by the device */
dma_sync_single_range_for_device(rx_ring->dev, bi->dma,
bi->page_offset,
I40E_RXBUFFER_2048,
rx_ring->rx_buf_len,
DMA_FROM_DEVICE);
/* Refresh the desc even if buffer_addrs didn't change
......@@ -1645,9 +1646,6 @@ static inline bool i40e_page_is_reusable(struct page *page)
**/
static bool i40e_can_reuse_rx_page(struct i40e_rx_buffer *rx_buffer)
{
#if (PAGE_SIZE >= 8192)
unsigned int last_offset = PAGE_SIZE - I40E_RXBUFFER_2048;
#endif
unsigned int pagecnt_bias = rx_buffer->pagecnt_bias;
struct page *page = rx_buffer->page;
......@@ -1660,7 +1658,9 @@ static bool i40e_can_reuse_rx_page(struct i40e_rx_buffer *rx_buffer)
if (unlikely((page_count(page) - pagecnt_bias) > 1))
return false;
#else
if (rx_buffer->page_offset > last_offset)
#define I40E_LAST_OFFSET \
(SKB_WITH_OVERHEAD(PAGE_SIZE) - I40E_RXBUFFER_2048)
if (rx_buffer->page_offset > I40E_LAST_OFFSET)
return false;
#endif
......@@ -1694,7 +1694,7 @@ static void i40e_add_rx_frag(struct i40e_ring *rx_ring,
unsigned int size)
{
#if (PAGE_SIZE < 8192)
unsigned int truesize = I40E_RXBUFFER_2048;
unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2;
#else
unsigned int truesize = SKB_DATA_ALIGN(size);
#endif
......@@ -1755,7 +1755,7 @@ static struct sk_buff *i40e_construct_skb(struct i40e_ring *rx_ring,
{
void *va = page_address(rx_buffer->page) + rx_buffer->page_offset;
#if (PAGE_SIZE < 8192)
unsigned int truesize = I40E_RXBUFFER_2048;
unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2;
#else
unsigned int truesize = SKB_DATA_ALIGN(size);
#endif
......@@ -1821,7 +1821,8 @@ static void i40e_put_rx_buffer(struct i40e_ring *rx_ring,
rx_ring->rx_stats.page_reuse_count++;
} else {
/* we are not reusing the buffer so unmap it */
dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma, PAGE_SIZE,
dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma,
i40e_rx_pg_size(rx_ring),
DMA_FROM_DEVICE, I40E_RX_DMA_ATTR);
__page_frag_cache_drain(rx_buffer->page,
rx_buffer->pagecnt_bias);
......
......@@ -119,6 +119,7 @@ enum i40e_dyn_idx_t {
#define I40E_RXBUFFER_256 256
#define I40E_RXBUFFER_1536 1536 /* 128B aligned standard Ethernet frame */
#define I40E_RXBUFFER_2048 2048
#define I40E_RXBUFFER_3072 3072 /* Used for large frames w/ padding */
#define I40E_MAX_RXBUFFER 9728 /* largest size for single descriptor */
/* NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN means we
......@@ -389,6 +390,17 @@ struct i40e_ring_container {
#define i40e_for_each_ring(pos, head) \
for (pos = (head).ring; pos != NULL; pos = pos->next)
static inline unsigned int i40e_rx_pg_order(struct i40e_ring *ring)
{
#if (PAGE_SIZE < 8192)
if (ring->rx_buf_len > (PAGE_SIZE / 2))
return 1;
#endif
return 0;
}
#define i40e_rx_pg_size(_ring) (PAGE_SIZE << i40e_rx_pg_order(_ring))
bool i40e_alloc_rx_buffers(struct i40e_ring *rxr, u16 cleaned_count);
netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
void i40e_clean_tx_ring(struct i40e_ring *tx_ring);
......
......@@ -509,14 +509,15 @@ void i40evf_clean_rx_ring(struct i40e_ring *rx_ring)
dma_sync_single_range_for_cpu(rx_ring->dev,
rx_bi->dma,
rx_bi->page_offset,
I40E_RXBUFFER_2048,
rx_ring->rx_buf_len,
DMA_FROM_DEVICE);
/* free resources associated with mapping */
dma_unmap_page_attrs(rx_ring->dev, rx_bi->dma,
PAGE_SIZE,
i40e_rx_pg_size(rx_ring),
DMA_FROM_DEVICE,
I40E_RX_DMA_ATTR);
__page_frag_cache_drain(rx_bi->page, rx_bi->pagecnt_bias);
rx_bi->page = NULL;
......@@ -638,7 +639,7 @@ static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring,
}
/* alloc new page for storage */
page = dev_alloc_page();
page = dev_alloc_pages(i40e_rx_pg_order(rx_ring));
if (unlikely(!page)) {
rx_ring->rx_stats.alloc_page_failed++;
return false;
......@@ -646,7 +647,7 @@ static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring,
/* map page for use */
dma = dma_map_page_attrs(rx_ring->dev, page, 0,
PAGE_SIZE,
i40e_rx_pg_size(rx_ring),
DMA_FROM_DEVICE,
I40E_RX_DMA_ATTR);
......@@ -654,7 +655,7 @@ static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring,
* there isn't much point in holding memory we can't use
*/
if (dma_mapping_error(rx_ring->dev, dma)) {
__free_pages(page, 0);
__free_pages(page, i40e_rx_pg_order(rx_ring));
rx_ring->rx_stats.alloc_page_failed++;
return false;
}
......@@ -714,7 +715,7 @@ bool i40evf_alloc_rx_buffers(struct i40e_ring *rx_ring, u16 cleaned_count)
/* sync the buffer for use by the device */
dma_sync_single_range_for_device(rx_ring->dev, bi->dma,
bi->page_offset,
I40E_RXBUFFER_2048,
rx_ring->rx_buf_len,
DMA_FROM_DEVICE);
/* Refresh the desc even if buffer_addrs didn't change
......@@ -1006,9 +1007,6 @@ static inline bool i40e_page_is_reusable(struct page *page)
**/
static bool i40e_can_reuse_rx_page(struct i40e_rx_buffer *rx_buffer)
{
#if (PAGE_SIZE >= 8192)
unsigned int last_offset = PAGE_SIZE - I40E_RXBUFFER_2048;
#endif
unsigned int pagecnt_bias = rx_buffer->pagecnt_bias;
struct page *page = rx_buffer->page;
......@@ -1021,7 +1019,9 @@ static bool i40e_can_reuse_rx_page(struct i40e_rx_buffer *rx_buffer)
if (unlikely((page_count(page) - pagecnt_bias) > 1))
return false;
#else
if (rx_buffer->page_offset > last_offset)
#define I40E_LAST_OFFSET \
(SKB_WITH_OVERHEAD(PAGE_SIZE) - I40E_RXBUFFER_2048)
if (rx_buffer->page_offset > I40E_LAST_OFFSET)
return false;
#endif
......@@ -1055,7 +1055,7 @@ static void i40e_add_rx_frag(struct i40e_ring *rx_ring,
unsigned int size)
{
#if (PAGE_SIZE < 8192)
unsigned int truesize = I40E_RXBUFFER_2048;
unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2;
#else
unsigned int truesize = SKB_DATA_ALIGN(size);
#endif
......@@ -1116,7 +1116,7 @@ static struct sk_buff *i40e_construct_skb(struct i40e_ring *rx_ring,
{
void *va = page_address(rx_buffer->page) + rx_buffer->page_offset;
#if (PAGE_SIZE < 8192)
unsigned int truesize = I40E_RXBUFFER_2048;
unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2;
#else
unsigned int truesize = SKB_DATA_ALIGN(size);
#endif
......@@ -1182,7 +1182,8 @@ static void i40e_put_rx_buffer(struct i40e_ring *rx_ring,
rx_ring->rx_stats.page_reuse_count++;
} else {
/* we are not reusing the buffer so unmap it */
dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma, PAGE_SIZE,
dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma,
i40e_rx_pg_size(rx_ring),
DMA_FROM_DEVICE, I40E_RX_DMA_ATTR);
__page_frag_cache_drain(rx_buffer->page,
rx_buffer->pagecnt_bias);
......
......@@ -106,6 +106,7 @@ enum i40e_dyn_idx_t {
#define I40E_RXBUFFER_256 256
#define I40E_RXBUFFER_1536 1536 /* 128B aligned standard Ethernet frame */
#define I40E_RXBUFFER_2048 2048
#define I40E_RXBUFFER_3072 3072 /* Used for large frames w/ padding */
#define I40E_MAX_RXBUFFER 9728 /* largest size for single descriptor */
/* NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN means we
......@@ -376,6 +377,17 @@ struct i40e_ring_container {
#define i40e_for_each_ring(pos, head) \
for (pos = (head).ring; pos != NULL; pos = pos->next)
static inline unsigned int i40e_rx_pg_order(struct i40e_ring *ring)
{
#if (PAGE_SIZE < 8192)
if (ring->rx_buf_len > (PAGE_SIZE / 2))
return 1;
#endif
return 0;
}
#define i40e_rx_pg_size(_ring) (PAGE_SIZE << i40e_rx_pg_order(_ring))
bool i40evf_alloc_rx_buffers(struct i40e_ring *rxr, u16 cleaned_count);
netdev_tx_t i40evf_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
void i40evf_clean_tx_ring(struct i40e_ring *tx_ring);
......
......@@ -694,6 +694,12 @@ static void i40evf_configure_rx(struct i40evf_adapter *adapter)
/* Legacy Rx will always default to a 2048 buffer size. */
#if (PAGE_SIZE < 8192)
if (!(adapter->flags & I40EVF_FLAG_LEGACY_RX)) {
/* For jumbo frames on systems with 4K pages we have to use
* an order 1 page, so we might as well increase the size
* of our Rx buffer to make better use of the available space
*/
rx_buf_len = I40E_RXBUFFER_3072;
/* We use a 1536 buffer size for configurations with
* standard Ethernet mtu. On x86 this gives us enough room
* for shared info and 192 bytes of padding.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment