Commit 9921f0b9 authored by Tony Lindgren's avatar Tony Lindgren

ARM: dts: Configure interconnect target module for omap5 emif

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" property to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 84864f8d
......@@ -266,28 +266,50 @@ dmm@0 {
};
};
emif1: emif@4c000000 {
compatible = "ti,emif-4d5";
ti,hwmods = "emif1";
ti,no-idle-on-init;
phy-type = <2>; /* DDR PHY type: Intelli PHY */
reg = <0x4c000000 0x400>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
hw-caps-read-idle-ctrl;
hw-caps-ll-interface;
hw-caps-temp-alert;
target-module@4c000000 {
compatible = "ti,sysc-omap4-simple", "ti,sysc";
ti,hwmods = "emif1";
reg = <0x4c000000 0x4>;
reg-names = "rev";
clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>;
clock-names = "fck";
ti,no-idle;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x4c000000 0x1000000>;
emif1: emif@0 {
compatible = "ti,emif-4d5";
reg = <0 0x400>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
phy-type = <2>; /* DDR PHY type: Intelli PHY */
hw-caps-read-idle-ctrl;
hw-caps-ll-interface;
hw-caps-temp-alert;
};
};
emif2: emif@4d000000 {
compatible = "ti,emif-4d5";
ti,hwmods = "emif2";
ti,no-idle-on-init;
phy-type = <2>; /* DDR PHY type: Intelli PHY */
reg = <0x4d000000 0x400>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
hw-caps-read-idle-ctrl;
hw-caps-ll-interface;
hw-caps-temp-alert;
target-module@4d000000 {
compatible = "ti,sysc-omap4-simple", "ti,sysc";
ti,hwmods = "emif2";
reg = <0x4d000000 0x4>;
reg-names = "rev";
clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>;
clock-names = "fck";
ti,no-idle;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x4d000000 0x1000000>;
emif2: emif@0 {
compatible = "ti,emif-4d5";
reg = <0 0x400>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
phy-type = <2>; /* DDR PHY type: Intelli PHY */
hw-caps-read-idle-ctrl;
hw-caps-ll-interface;
hw-caps-temp-alert;
};
};
aes1_target: target-module@4b501000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment