Commit 994f2f9e authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branch 'asoc/topic/da9055' into asoc-next

parents 5d1aab96 5619d76d
......@@ -173,6 +173,7 @@
#define DA9055_AIF_FORMAT_I2S_MODE (0 << 0)
#define DA9055_AIF_FORMAT_LEFT_J (1 << 0)
#define DA9055_AIF_FORMAT_RIGHT_J (2 << 0)
#define DA9055_AIF_FORMAT_DSP (3 << 0)
#define DA9055_AIF_WORD_S16_LE (0 << 2)
#define DA9055_AIF_WORD_S20_3LE (1 << 2)
#define DA9055_AIF_WORD_S24_LE (2 << 2)
......@@ -752,6 +753,17 @@ static const struct snd_kcontrol_new da9055_dapm_mixoutr_controls[] = {
6, 1, 0),
};
/* Headphone Output Enable */
static const struct snd_kcontrol_new da9055_dapm_hp_l_control =
SOC_DAPM_SINGLE("Switch", DA9055_HP_L_CTRL, 3, 1, 0);
static const struct snd_kcontrol_new da9055_dapm_hp_r_control =
SOC_DAPM_SINGLE("Switch", DA9055_HP_R_CTRL, 3, 1, 0);
/* Lineout Output Enable */
static const struct snd_kcontrol_new da9055_dapm_lineout_control =
SOC_DAPM_SINGLE("Switch", DA9055_LINE_CTRL, 3, 1, 0);
/* DAPM widgets */
static const struct snd_soc_dapm_widget da9055_dapm_widgets[] = {
/* Input Side */
......@@ -816,6 +828,14 @@ static const struct snd_soc_dapm_widget da9055_dapm_widgets[] = {
&da9055_dapm_mixoutr_controls[0],
ARRAY_SIZE(da9055_dapm_mixoutr_controls)),
/* Output Enable Switches */
SND_SOC_DAPM_SWITCH("Headphone Left Enable", SND_SOC_NOPM, 0, 0,
&da9055_dapm_hp_l_control),
SND_SOC_DAPM_SWITCH("Headphone Right Enable", SND_SOC_NOPM, 0, 0,
&da9055_dapm_hp_r_control),
SND_SOC_DAPM_SWITCH("Lineout Enable", SND_SOC_NOPM, 0, 0,
&da9055_dapm_lineout_control),
/* Output PGAs */
SND_SOC_DAPM_PGA("MIXOUT Left", DA9055_MIXOUT_L_CTRL, 7, 0, NULL, 0),
SND_SOC_DAPM_PGA("MIXOUT Right", DA9055_MIXOUT_R_CTRL, 7, 0, NULL, 0),
......@@ -901,17 +921,20 @@ static const struct snd_soc_dapm_route da9055_audio_map[] = {
{"Out Mixer Right", "DAC Right Switch", "DAC Right"},
{"MIXOUT Left", NULL, "Out Mixer Left"},
{"Headphone Left", NULL, "MIXOUT Left"},
{"Headphone Left Enable", "Switch", "MIXOUT Left"},
{"Headphone Left", NULL, "Headphone Left Enable"},
{"Headphone Left", NULL, "Charge Pump"},
{"HPL", NULL, "Headphone Left"},
{"MIXOUT Right", NULL, "Out Mixer Right"},
{"Headphone Right", NULL, "MIXOUT Right"},
{"Headphone Right Enable", "Switch", "MIXOUT Right"},
{"Headphone Right", NULL, "Headphone Right Enable"},
{"Headphone Right", NULL, "Charge Pump"},
{"HPR", NULL, "Headphone Right"},
{"MIXOUT Right", NULL, "Out Mixer Right"},
{"Lineout", NULL, "MIXOUT Right"},
{"Lineout Enable", "Switch", "MIXOUT Right"},
{"Lineout", NULL, "Lineout Enable"},
{"LINE", NULL, "Lineout"},
};
......@@ -1175,6 +1198,9 @@ static int da9055_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
case SND_SOC_DAIFMT_RIGHT_J:
aif_ctrl = DA9055_AIF_FORMAT_RIGHT_J;
break;
case SND_SOC_DAIFMT_DSP_A:
aif_ctrl = DA9055_AIF_FORMAT_DSP;
break;
default:
return -EINVAL;
}
......@@ -1390,8 +1416,7 @@ static int da9055_probe(struct snd_soc_codec *codec)
DA9055_GAIN_RAMPING_EN, DA9055_GAIN_RAMPING_EN);
/*
* There are two separate control bits for input and output mixers as
* well as headphone and line outs.
* There are two separate control bits for input and output mixers.
* One to enable corresponding amplifier and other to enable its
* output. As amplifier bits are related to power control, they are
* being managed by DAPM while other (non power related) bits are
......@@ -1407,14 +1432,6 @@ static int da9055_probe(struct snd_soc_codec *codec)
snd_soc_update_bits(codec, DA9055_MIXOUT_R_CTRL,
DA9055_MIXOUT_R_MIX_EN, DA9055_MIXOUT_R_MIX_EN);
snd_soc_update_bits(codec, DA9055_HP_L_CTRL,
DA9055_HP_L_AMP_OE, DA9055_HP_L_AMP_OE);
snd_soc_update_bits(codec, DA9055_HP_R_CTRL,
DA9055_HP_R_AMP_OE, DA9055_HP_R_AMP_OE);
snd_soc_update_bits(codec, DA9055_LINE_CTRL,
DA9055_LINE_AMP_OE, DA9055_LINE_AMP_OE);
/* Set this as per your system configuration */
snd_soc_write(codec, DA9055_PLL_CTRL, DA9055_PLL_INDIV_10_20_MHZ);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment