Commit 99d8238f authored by Anton Vorontsov's avatar Anton Vorontsov Committed by Kumar Gala

powerpc/85xx: Cleanup QE initialization for MPC85xxMDS boards

The mpc85xx_mds_setup_arch() function is incomprehensible
and unmaintainable. Factor out all QE specific stuff into
mpc85xx_mds_qe_init() and mpc85xx_mds_reset_ucc_phys().

Also move QE stuff out of mpc85xx_mds_pic_init().

The diff is unreadable, but only because the code was so. ;-)
It should be better now, and less indented.
Signed-off-by: default avatarAnton Vorontsov <avorontsov@mvista.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent dee9ad71
......@@ -177,63 +177,89 @@ static void __init mpc85xx_publish_qe_devices(void)
of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL);
}
#else
static void __init mpc85xx_publish_qe_devices(void) { }
#endif /* CONFIG_QUICC_ENGINE */
static void __init mpc85xx_mds_setup_arch(void)
static void __init mpc85xx_mds_reset_ucc_phys(void)
{
struct device_node *np;
static u8 __iomem *bcsr_regs = NULL;
#ifdef CONFIG_PCI
struct pci_controller *hose;
#endif
dma_addr_t max = 0xffffffff;
if (ppc_md.progress)
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
static u8 __iomem *bcsr_regs;
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (np != NULL) {
struct resource res;
if (!np)
return;
of_address_to_resource(np, 0, &res);
bcsr_regs = ioremap(res.start, res.end - res.start +1);
of_node_put(np);
}
bcsr_regs = of_iomap(np, 0);
of_node_put(np);
if (!bcsr_regs)
return;
#ifdef CONFIG_PCI
for_each_node_by_type(np, "pci") {
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
struct resource rsrc;
of_address_to_resource(np, 0, &rsrc);
if ((rsrc.start & 0xfffff) == 0x8000)
fsl_add_bridge(np, 1);
else
fsl_add_bridge(np, 0);
if (machine_is(mpc8568_mds)) {
#define BCSR_UCC1_GETH_EN (0x1 << 7)
#define BCSR_UCC2_GETH_EN (0x1 << 7)
#define BCSR_UCC1_MODE_MSK (0x3 << 4)
#define BCSR_UCC2_MODE_MSK (0x3 << 0)
hose = pci_find_hose_for_OF_device(np);
max = min(max, hose->dma_window_base_cur +
hose->dma_window_size);
/* Turn off UCC1 & UCC2 */
clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
/* Mode is RGMII, all bits clear */
clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
BCSR_UCC2_MODE_MSK);
/* Turn UCC1 & UCC2 on */
setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
} else if (machine_is(mpc8569_mds)) {
#define BCSR7_UCC12_GETHnRST (0x1 << 2)
#define BCSR8_UEM_MARVELL_RST (0x1 << 1)
#define BCSR_UCC_RGMII (0x1 << 6)
#define BCSR_UCC_RTBI (0x1 << 5)
/*
* U-Boot mangles interrupt polarity for Marvell PHYs,
* so reset built-in and UEM Marvell PHYs, this puts
* the PHYs into their normal state.
*/
clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
for (np = NULL; (np = of_find_compatible_node(np,
"network",
"ucc_geth")) != NULL;) {
const unsigned int *prop;
int ucc_num;
prop = of_get_property(np, "cell-index", NULL);
if (prop == NULL)
continue;
ucc_num = *prop - 1;
prop = of_get_property(np, "phy-connection-type", NULL);
if (prop == NULL)
continue;
if (strcmp("rtbi", (const char *)prop) == 0)
clrsetbits_8(&bcsr_regs[7 + ucc_num],
BCSR_UCC_RGMII, BCSR_UCC_RTBI);
}
} else if (machine_is(p1021_mds)) {
#define BCSR11_ENET_MICRST (0x1 << 5)
/* Reset Micrel PHY */
clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
}
#endif
#ifdef CONFIG_SMP
mpc85xx_smp_init();
#endif
iounmap(bcsr_regs);
}
#ifdef CONFIG_SWIOTLB
if (lmb_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
static void __init mpc85xx_mds_qe_init(void)
{
struct device_node *np;
#ifdef CONFIG_QUICC_ENGINE
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!np) {
np = of_find_node_by_name(NULL, "qe");
......@@ -260,70 +286,7 @@ static void __init mpc85xx_mds_setup_arch(void)
par_io_of_config(ucc);
}
if (bcsr_regs) {
if (machine_is(mpc8568_mds)) {
#define BCSR_UCC1_GETH_EN (0x1 << 7)
#define BCSR_UCC2_GETH_EN (0x1 << 7)
#define BCSR_UCC1_MODE_MSK (0x3 << 4)
#define BCSR_UCC2_MODE_MSK (0x3 << 0)
/* Turn off UCC1 & UCC2 */
clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
/* Mode is RGMII, all bits clear */
clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
BCSR_UCC2_MODE_MSK);
/* Turn UCC1 & UCC2 on */
setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
} else if (machine_is(mpc8569_mds)) {
#define BCSR7_UCC12_GETHnRST (0x1 << 2)
#define BCSR8_UEM_MARVELL_RST (0x1 << 1)
#define BCSR_UCC_RGMII (0x1 << 6)
#define BCSR_UCC_RTBI (0x1 << 5)
/*
* U-Boot mangles interrupt polarity for Marvell PHYs,
* so reset built-in and UEM Marvell PHYs, this puts
* the PHYs into their normal state.
*/
clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
for (np = NULL; (np = of_find_compatible_node(np,
"network",
"ucc_geth")) != NULL;) {
const unsigned int *prop;
int ucc_num;
prop = of_get_property(np, "cell-index", NULL);
if (prop == NULL)
continue;
ucc_num = *prop - 1;
prop = of_get_property(np, "phy-connection-type", NULL);
if (prop == NULL)
continue;
if (strcmp("rtbi", (const char *)prop) == 0)
clrsetbits_8(&bcsr_regs[7 + ucc_num],
BCSR_UCC_RGMII, BCSR_UCC_RTBI);
}
} else if (machine_is(p1021_mds)) {
#define BCSR11_ENET_MICRST (0x1 << 5)
/* Reset Micrel PHY */
clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
}
iounmap(bcsr_regs);
}
mpc85xx_mds_reset_ucc_phys();
if (machine_is(p1021_mds)) {
#define MPC85xx_PMUXCR_OFFSET 0x60
......@@ -358,7 +321,79 @@ static void __init mpc85xx_mds_setup_arch(void)
}
}
}
static void __init mpc85xx_mds_qeic_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!of_device_is_available(np)) {
of_node_put(np);
return;
}
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np) {
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
}
if (machine_is(p1021_mds))
qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
qe_ic_cascade_high_mpic);
else
qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
of_node_put(np);
}
#else
static void __init mpc85xx_publish_qe_devices(void) { }
static void __init mpc85xx_mds_qe_init(void) { }
static void __init mpc85xx_mds_qeic_init(void) { }
#endif /* CONFIG_QUICC_ENGINE */
static void __init mpc85xx_mds_setup_arch(void)
{
#ifdef CONFIG_PCI
struct pci_controller *hose;
#endif
dma_addr_t max = 0xffffffff;
if (ppc_md.progress)
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
#ifdef CONFIG_PCI
for_each_node_by_type(np, "pci") {
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
struct resource rsrc;
of_address_to_resource(np, 0, &rsrc);
if ((rsrc.start & 0xfffff) == 0x8000)
fsl_add_bridge(np, 1);
else
fsl_add_bridge(np, 0);
hose = pci_find_hose_for_OF_device(np);
max = min(max, hose->dma_window_base_cur +
hose->dma_window_size);
}
}
#endif
#ifdef CONFIG_SMP
mpc85xx_smp_init();
#endif
mpc85xx_mds_qe_init();
#ifdef CONFIG_SWIOTLB
if (lmb_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
}
......@@ -465,28 +500,7 @@ static void __init mpc85xx_mds_pic_init(void)
of_node_put(np);
mpic_init(mpic);
#ifdef CONFIG_QUICC_ENGINE
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!of_device_is_available(np)) {
of_node_put(np);
return;
}
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np) {
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
}
if (machine_is(p1021_mds))
qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
qe_ic_cascade_high_mpic);
else
qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
mpc85xx_mds_qeic_init();
}
static int __init mpc85xx_mds_probe(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment