Commit 99da1b48 authored by Ron Rindjunsky's avatar Ron Rindjunsky Committed by John W. Linville

iwlwifi: add ucode init flow handling for iwl5000

This patch adds all the handlers and functions needed for ucode
initialization flow.
Signed-off-by: default avatarRon Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: default avatarTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent dbb983b7
......@@ -46,6 +46,16 @@
#define IWL5000_UCODE_API "-1"
static const u16 iwl5000_default_queue_to_tx_fifo[] = {
IWL_TX_FIFO_AC3,
IWL_TX_FIFO_AC2,
IWL_TX_FIFO_AC1,
IWL_TX_FIFO_AC0,
IWL50_CMD_FIFO_NUM,
IWL_TX_FIFO_HCCA_1,
IWL_TX_FIFO_HCCA_2
};
static int iwl5000_apm_init(struct iwl_priv *priv)
{
int ret = 0;
......@@ -420,6 +430,151 @@ static int iwl5000_load_ucode(struct iwl_priv *priv)
return ret;
}
static void iwl5000_init_alive_start(struct iwl_priv *priv)
{
int ret = 0;
/* Check alive response for "valid" sign from uCode */
if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
/* We had an error bringing up the hardware, so take it
* all the way back down so we can try again */
IWL_DEBUG_INFO("Initialize Alive failed.\n");
goto restart;
}
/* initialize uCode was loaded... verify inst image.
* This is a paranoid check, because we would not have gotten the
* "initialize" alive if code weren't properly loaded. */
if (iwl_verify_ucode(priv)) {
/* Runtime instruction load was bad;
* take it all the way back down so we can try again */
IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
goto restart;
}
iwlcore_clear_stations_table(priv);
ret = priv->cfg->ops->lib->alive_notify(priv);
if (ret) {
IWL_WARNING("Could not complete ALIVE transition: %d\n", ret);
goto restart;
}
return;
restart:
/* real restart (first load init_ucode) */
queue_work(priv->workqueue, &priv->restart);
}
static void iwl5000_set_wr_ptrs(struct iwl_priv *priv,
int txq_id, u32 index)
{
iwl_write_direct32(priv, HBUS_TARG_WRPTR,
(index & 0xff) | (txq_id << 8));
iwl_write_prph(priv, IWL50_SCD_QUEUE_RDPTR(txq_id), index);
}
static void iwl5000_tx_queue_set_status(struct iwl_priv *priv,
struct iwl_tx_queue *txq,
int tx_fifo_id, int scd_retry)
{
int txq_id = txq->q.id;
int active = test_bit(txq_id, &priv->txq_ctx_active_msk)?1:0;
iwl_write_prph(priv, IWL50_SCD_QUEUE_STATUS_BITS(txq_id),
(active << IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
(tx_fifo_id << IWL50_SCD_QUEUE_STTS_REG_POS_TXF) |
(1 << IWL50_SCD_QUEUE_STTS_REG_POS_WSL) |
IWL50_SCD_QUEUE_STTS_REG_MSK);
txq->sched_retry = scd_retry;
IWL_DEBUG_INFO("%s %s Queue %d on AC %d\n",
active ? "Activate" : "Deactivate",
scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
}
static int iwl5000_alive_notify(struct iwl_priv *priv)
{
u32 a;
int i = 0;
unsigned long flags;
int ret;
spin_lock_irqsave(&priv->lock, flags);
ret = iwl_grab_nic_access(priv);
if (ret) {
spin_unlock_irqrestore(&priv->lock, flags);
return ret;
}
priv->scd_base_addr = iwl_read_prph(priv, IWL50_SCD_SRAM_BASE_ADDR);
a = priv->scd_base_addr + IWL50_SCD_CONTEXT_DATA_OFFSET;
for (; a < priv->scd_base_addr + IWL50_SCD_TX_STTS_BITMAP_OFFSET;
a += 4)
iwl_write_targ_mem(priv, a, 0);
for (; a < priv->scd_base_addr + IWL50_SCD_TRANSLATE_TBL_OFFSET;
a += 4)
iwl_write_targ_mem(priv, a, 0);
for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4)
iwl_write_targ_mem(priv, a, 0);
iwl_write_prph(priv, IWL50_SCD_DRAM_BASE_ADDR,
(priv->shared_phys +
offsetof(struct iwl5000_shared, queues_byte_cnt_tbls)) >> 10);
iwl_write_prph(priv, IWL50_SCD_QUEUECHAIN_SEL,
IWL50_SCD_QUEUECHAIN_SEL_ALL(
priv->hw_params.max_txq_num));
iwl_write_prph(priv, IWL50_SCD_AGGR_SEL, 0);
/* initiate the queues */
for (i = 0; i < priv->hw_params.max_txq_num; i++) {
iwl_write_prph(priv, IWL50_SCD_QUEUE_RDPTR(i), 0);
iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
iwl_write_targ_mem(priv, priv->scd_base_addr +
IWL50_SCD_CONTEXT_QUEUE_OFFSET(i), 0);
iwl_write_targ_mem(priv, priv->scd_base_addr +
IWL50_SCD_CONTEXT_QUEUE_OFFSET(i) +
sizeof(u32),
((SCD_WIN_SIZE <<
IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
((SCD_FRAME_LIMIT <<
IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
}
iwl_write_prph(priv, IWL50_SCD_INTERRUPT_MASK,
(1 << priv->hw_params.max_txq_num) - 1);
iwl_write_prph(priv, IWL50_SCD_TXFACT,
SCD_TXFACT_REG_TXFIFO_MASK(0, 7));
iwl5000_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
/* map qos queues to fifos one-to-one */
for (i = 0; i < ARRAY_SIZE(iwl5000_default_queue_to_tx_fifo); i++) {
int ac = iwl5000_default_queue_to_tx_fifo[i];
iwl_txq_ctx_activate(priv, i);
iwl5000_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
}
/* TODO - need to initialize those FIFOs inside the loop above,
* not only mark them as active */
iwl_txq_ctx_activate(priv, 4);
iwl_txq_ctx_activate(priv, 7);
iwl_txq_ctx_activate(priv, 8);
iwl_txq_ctx_activate(priv, 9);
iwl_release_nic_access(priv);
spin_unlock_irqrestore(&priv->lock, flags);
/* Ask for statistics now, the uCode will send notification
* periodically after association */
iwl_send_statistics_request(priv, CMD_ASYNC);
return 0;
}
static int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
{
if ((priv->cfg->mod_params->num_of_queues > IWL50_NUM_QUEUES) ||
......@@ -622,6 +777,8 @@ static struct iwl_lib_ops iwl5000_lib = {
.disable_tx_fifo = iwl5000_disable_tx_fifo,
.rx_handler_setup = iwl5000_rx_handler_setup,
.load_ucode = iwl5000_load_ucode,
.init_alive_start = iwl5000_init_alive_start,
.alive_notify = iwl5000_alive_notify,
.apm_ops = {
.init = iwl5000_apm_init,
.config = iwl5000_nic_config,
......
......@@ -517,6 +517,34 @@
#define IWL49_SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF)
/* 5000 SCD */
#define IWL50_SCD_QUEUE_STTS_REG_POS_TXF (0)
#define IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE (3)
#define IWL50_SCD_QUEUE_STTS_REG_POS_WSL (4)
#define IWL50_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19)
#define IWL50_SCD_QUEUE_STTS_REG_MSK (0x00FF0000)
#define IWL50_SCD_QUEUE_CTX_REG1_CREDIT_POS (8)
#define IWL50_SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00)
#define IWL50_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24)
#define IWL50_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000)
#define IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0)
#define IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F)
#define IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16)
#define IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000)
#define IWL50_SCD_CONTEXT_DATA_OFFSET (0x600)
#define IWL50_SCD_TX_STTS_BITMAP_OFFSET (0x7B1)
#define IWL50_SCD_TRANSLATE_TBL_OFFSET (0x7E0)
#define IWL50_SCD_CONTEXT_QUEUE_OFFSET(x)\
(IWL50_SCD_CONTEXT_DATA_OFFSET + ((x) * 8))
#define IWL50_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \
((IWL50_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffc)
#define IWL50_SCD_QUEUECHAIN_SEL_ALL(x) (((1<<(x)) - 1) &\
(~(1<<IWL_CMD_QUEUE_NUM)))
#define IWL50_SCD_BASE (PRPH_BASE + 0xa02c00)
#define IWL50_SCD_SRAM_BASE_ADDR (IWL50_SCD_BASE + 0x0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment