Merge branch 'omap-for-v3.8/cleanup-headers-gpmc' into omap-for-v3.8/cleanup-headers

Conflicts:
	arch/arm/mach-omap2/board-3430sdp.c
	arch/arm/mach-omap2/board-h4.c
	arch/arm/mach-omap2/board-rx51-peripherals.c
	arch/arm/mach-omap2/board-rx51.c
	arch/arm/mach-omap2/pm34xx.c
	drivers/mtd/nand/omap2.c
	drivers/mtd/onenand/omap2.c

arch/arm/mach-omap2/board-2430sdp.c

@@ -34,7 +34,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 #include "gpmc-smc91x.h"
 

arch/arm/mach-omap2/board-3430sdp.c

@@ -33,10 +33,10 @@
 #include <plat/usb.h>
 #include "common.h"
 #include <plat-omap/dma-omap.h>
-#include <plat/gpmc.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 
+#include "gpmc.h"
 #include "gpmc-smc91x.h"
 
 #include "board-flash.h"

arch/arm/mach-omap2/board-apollon.c

@@ -35,7 +35,7 @@
 
 #include <plat/led.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>

arch/arm/mach-omap2/board-cm-t35.c

@@ -40,7 +40,7 @@
 
 #include "common.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
@@ -53,6 +53,7 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc-nand.h"
 
 #define CM_T35_GPIO_PENDOWN		57
 #define SB_T35_USB_HUB_RESET_GPIO	167
@@ -181,7 +182,7 @@ static struct omap_nand_platform_data cm_t35_nand_data = {
 
 static void __init cm_t35_init_nand(void)
 {
-	if (gpmc_nand_init(&cm_t35_nand_data) < 0)
+	if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
 		pr_err("CM-T35: Unable to register NAND device\n");
 }
 #else

arch/arm/mach-omap2/board-cm-t3517.c

@@ -41,7 +41,7 @@
 #include "common.h"
 #include <plat/usb.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 
 #include "am35xx.h"
 
@@ -49,6 +49,7 @@
 #include "control.h"
 #include "common-board-devices.h"
 #include "am35xx-emac.h"
+#include "gpmc-nand.h"
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {
@@ -240,7 +241,7 @@ static struct omap_nand_platform_data cm_t3517_nand_data = {
 
 static void __init cm_t3517_init_nand(void)
 {
-	if (gpmc_nand_init(&cm_t3517_nand_data) < 0)
+	if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0)
 		pr_err("CM-T3517: NAND initialization failed\n");
 }
 #else

arch/arm/mach-omap2/board-devkit8000.c

@@ -39,7 +39,7 @@
 #include <asm/mach/flash.h>
 
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
@@ -55,8 +55,11 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mux.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 
+#define	NAND_CS			0
+
 #define OMAP_DM9000_GPIO_IRQ	25
 #define OMAP3_DEVKIT_TS_GPIO	27
 
@@ -621,8 +624,9 @@ static void __init devkit8000_init(void)
 
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
-			     ARRAY_SIZE(devkit8000_nand_partitions));
+	board_nand_init(devkit8000_nand_partitions,
+			ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
+			NAND_BUSWIDTH_16, NULL);
 	omap_twl4030_audio_init("omap3beagle");
 
 	/* Ensure SDRC pins are mux'd for self-refresh */

arch/arm/mach-omap2/board-flash.c

@@ -18,13 +18,15 @@
 #include <linux/io.h>
 
 #include <plat/cpu.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 #include <plat/tc.h>
 
 #include "common.h"
 #include "board-flash.h"
+#include "gpmc-onenand.h"
+#include "gpmc-nand.h"
 
 #define REG_FPGA_REV			0x10
 #define REG_FPGA_DIP_SWITCH_INPUT2	0x60
@@ -104,36 +106,35 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 
 /* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
+struct gpmc_timings nand_default_timings[1] = {
+	{
+		.sync_clk = 0,
 
-	.sync_clk = 0,
+		.cs_on = 0,
+		.cs_rd_off = 36,
+		.cs_wr_off = 36,
 
-	.cs_on = 0,
-	.cs_rd_off = 36,
-	.cs_wr_off = 36,
+		.adv_on = 6,
+		.adv_rd_off = 24,
+		.adv_wr_off = 36,
 
-	.adv_on = 6,
-	.adv_rd_off = 24,
-	.adv_wr_off = 36,
+		.we_off = 30,
+		.oe_off = 48,
 
-	.we_off = 30,
-	.oe_off = 48,
+		.access = 54,
+		.rd_cycle = 72,
+		.wr_cycle = 72,
 
-	.access = 54,
-	.rd_cycle = 72,
-	.wr_cycle = 72,
-
-	.wr_access = 30,
-	.wr_data_mux_bus = 0,
+		.wr_access = 30,
+		.wr_data_mux_bus = 0,
+	},
 };
 
-static struct omap_nand_platform_data board_nand_data = {
-	.gpmc_t		= &nand_timings,
-};
+static struct omap_nand_platform_data board_nand_data;
 
 void
-__init board_nand_init(struct mtd_partition *nand_parts,
-			u8 nr_parts, u8 cs, int nand_type)
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
+				int nand_type, struct gpmc_timings *gpmc_t)
 {
 	board_nand_data.cs		= cs;
 	board_nand_data.parts		= nand_parts;
@@ -141,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts,
 	board_nand_data.devsize		= nand_type;
 
 	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
-	gpmc_nand_init(&board_nand_data);
+	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
 
@@ -238,5 +239,6 @@ void __init board_flash_init(struct flash_partitions partition_info[],
 		pr_err("NAND: Unable to find configuration in GPMC\n");
 	else
 		board_nand_init(partition_info[2].parts,
-			partition_info[2].nr_parts, nandcs, nand_type);
+			partition_info[2].nr_parts, nandcs,
+			nand_type, nand_default_timings);
 }

arch/arm/mach-omap2/board-flash.h

@@ -12,7 +12,7 @@
  */
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 
 #define PDC_NOR		1
 #define PDC_NAND	2
@@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[],
 #if defined(CONFIG_MTD_NAND_OMAP2) || \
 		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 extern void board_nand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs, int nand_type);
+		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
+extern struct gpmc_timings nand_default_timings[];
 #else
 static inline void board_nand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs, int nand_type)
+		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
 {
 }
+#define	nand_default_timings	NULL
 #endif
 
 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \

arch/arm/mach-omap2/board-h4.c

@@ -33,7 +33,6 @@
 
 #include <plat/menelaus.h>
 #include <plat-omap/dma-omap.h>
-#include <plat/gpmc.h>
 #include "debug-devices.h"
 
 #include <video/omapdss.h>
@@ -42,6 +41,7 @@
 #include "common.h"
 #include "mux.h"
 #include "control.h"
+#include "gpmc.h"
 
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1

arch/arm/mach-omap2/board-igep0020.c

@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 
 #include <video/omapdss.h>
@@ -43,6 +43,7 @@
 #include "common-board-devices.h"
 #include "board-flash.h"
 #include "control.h"
+#include "gpmc-onenand.h"
 
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
@@ -175,7 +176,7 @@ static void __init igep_flash_init(void)
 		pr_info("IGEP: initializing NAND memory device\n");
 		board_nand_init(igep_flash_partitions,
 				ARRAY_SIZE(igep_flash_partitions),
-				0, NAND_BUSWIDTH_16);
+				0, NAND_BUSWIDTH_16, nand_default_timings);
 	} else if (mux == IGEP_SYSBOOT_ONENAND) {
 		pr_info("IGEP: initializing OneNAND memory device\n");
 		board_onenand_init(igep_flash_partitions,

arch/arm/mach-omap2/board-ldp.c

@@ -35,7 +35,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <mach/board-zoom.h>
 #include <plat/usb.h>
 #include "gpmc-smsc911x.h"
@@ -420,8 +420,8 @@ static void __init omap_ldp_init(void)
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 	usb_musb_init(NULL);
-	board_nand_init(ldp_nand_partitions,
-		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
+	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
+			ZOOM_NAND_CS, 0, nand_default_timings);
 
 	omap_hsmmc_init(mmc);
 	ldp_display_init();

arch/arm/mach-omap2/board-n8x0.c

@@ -32,6 +32,7 @@
 #include <plat/mmc.h>
 
 #include "mux.h"
+#include "gpmc-onenand.h"
 
 #define TUSB6010_ASYNC_CS	1
 #define TUSB6010_SYNC_CS	4

arch/arm/mach-omap2/board-omap3beagle.c

@@ -41,7 +41,7 @@
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <plat/omap_device.h>
@@ -49,8 +49,11 @@
 #include "mux.h"
 #include "hsmmc.h"
 #include "pm.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 
+#define	NAND_CS	0
+
 /*
  * OMAP3 Beagle revision
  * Run time detection of Beagle revision is done by reading GPIO.
@@ -512,8 +515,9 @@ static void __init omap3_beagle_init(void)
 
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
-			     ARRAY_SIZE(omap3beagle_nand_partitions));
+	board_nand_init(omap3beagle_nand_partitions,
+			ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
+			NAND_BUSWIDTH_16, NULL);
 	omap_twl4030_audio_init("omap3beagle");
 
 	/* Ensure msecure is mux'd to be able to set the RTC. */

arch/arm/mach-omap2/board-omap3evm.c

@@ -56,6 +56,9 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "board-flash.h"
+
+#define	NAND_CS			0
 
 #define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
@@ -731,8 +734,9 @@ static void __init omap3_evm_init(void)
 	}
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
-			     ARRAY_SIZE(omap3evm_nand_partitions));
+	board_nand_init(omap3evm_nand_partitions,
+			ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
+			NAND_BUSWIDTH_16, NULL);
 
 	omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
 	omap3evm_init_smsc911x();

arch/arm/mach-omap2/board-omap3logic.c

@@ -35,7 +35,7 @@
 #include <asm/mach/map.h>
 
 #include "gpmc-smsc911x.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/sdrc.h>
 #include <plat/usb.h>
 

arch/arm/mach-omap2/board-omap3pandora.c

@@ -50,6 +50,7 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc-nand.h"
 
 #define PANDORA_WIFI_IRQ_GPIO		21
 #define PANDORA_WIFI_NRESET_GPIO	23
@@ -602,7 +603,7 @@ static void __init omap3pandora_init(void)
 	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
 	usbhs_init(&usbhs_bdata);
 	usb_musb_init(NULL);
-	gpmc_nand_init(&pandora_nand_data);
+	gpmc_nand_init(&pandora_nand_data, NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);

arch/arm/mach-omap2/board-omap3stalker.c

@@ -40,7 +40,7 @@
 #include <asm/mach/flash.h>
 
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -44,12 +44,13 @@
 #include <asm/system_info.h>
 
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 
 #include "mux.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 
 #include <asm/setup.h>
@@ -59,6 +60,8 @@
 #define TB_BL_PWM_TIMER		9
 #define TB_KILL_POWER_GPIO	168
 
+#define	NAND_CS			0
+
 static unsigned long touchbook_revision;
 
 static struct mtd_partition omap3touchbook_nand_partitions[] = {
@@ -365,8 +368,9 @@ static void __init omap3_touchbook_init(void)
 	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
-			     ARRAY_SIZE(omap3touchbook_nand_partitions));
+	board_nand_init(omap3touchbook_nand_partitions,
+			ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
+			NAND_BUSWIDTH_16, NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);

arch/arm/mach-omap2/board-overo.c

@@ -49,14 +49,17 @@
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 
+#define	NAND_CS			0
+
 #define OVERO_GPIO_BT_XGATE	15
 #define OVERO_GPIO_W2W_NRESET	16
 #define OVERO_GPIO_PENDOWN	114
@@ -495,8 +498,8 @@ static void __init overo_init(void)
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
-	omap_nand_flash_init(0, overo_nand_partitions,
-			     ARRAY_SIZE(overo_nand_partitions));
+	board_nand_init(overo_nand_partitions,
+			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	overo_spi_init();

arch/arm/mach-omap2/board-rm680.c

@@ -25,7 +25,7 @@
 #include <plat/i2c.h>
 #include <plat/mmc.h>
 #include <plat/usb.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "common.h"
 #include <plat/serial.h>
 
@@ -33,6 +33,7 @@
 #include "hsmmc.h"
 #include "sdram-nokia.h"
 #include "common-board-devices.h"
+#include "gpmc-onenand.h"
 
 static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -32,7 +32,6 @@
 
 #include "common.h"
 #include <plat-omap/dma-omap.h>
-#include <plat/gpmc.h>
 #include <plat/omap-pm.h>
 #include "gpmc-smc91x.h"
 
@@ -54,6 +53,8 @@
 #include "mux.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-onenand.h"
 
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8

arch/arm/mach-omap2/board-rx51.c

@@ -23,12 +23,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include "common.h"
 #include <plat-omap/dma-omap.h>
-#include <plat/gpmc.h>
 #include <plat/usb.h>
 
+#include "common.h"
 #include "mux.h"
+#include "gpmc.h"
 #include "pm.h"
 #include "sdram-nokia.h"
 

arch/arm/mach-omap2/board-zoom-debugboard.c

@@ -17,7 +17,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "gpmc-smsc911x.h"
 
 #include <mach/board-zoom.h>

arch/arm/mach-omap2/board-zoom.c

@@ -113,8 +113,9 @@ static void __init omap_zoom_init(void)
 		usbhs_init(&usbhs_bdata);
 	}
 
-	board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
-						ZOOM_NAND_CS, NAND_BUSWIDTH_16);
+	board_nand_init(zoom_nand_partitions,
+			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
+			NAND_BUSWIDTH_16, nand_default_timings);
 	zoom_debugboard_init();
 	zoom_peripherals_init();
 

arch/arm/mach-omap2/common-board-devices.c

@@ -25,7 +25,6 @@
 #include <linux/spi/ads7846.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
 
 #include "common.h"
 #include "common-board-devices.h"
@@ -96,48 +95,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 {
 }
 #endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-				 int nr_parts)
-{
-	u8 cs = 0;
-	u8 nandcs = GPMC_CS_NUM + 1;
-
-	/* find out the chip-select on which NAND exists */
-	while (cs < GPMC_CS_NUM) {
-		u32 ret = 0;
-		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-		if ((ret & 0xC00) == 0x800) {
-			printk(KERN_INFO "Found NAND on CS%d\n", cs);
-			if (nandcs > GPMC_CS_NUM)
-				nandcs = cs;
-		}
-		cs++;
-	}
-
-	if (nandcs > GPMC_CS_NUM) {
-		pr_info("NAND: Unable to find configuration in GPMC\n");
-		return;
-	}
-
-	if (nandcs < GPMC_CS_NUM) {
-		nand_data.cs = nandcs;
-		nand_data.parts = parts;
-		nand_data.nr_parts = nr_parts;
-		nand_data.devsize = options;
-
-		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (gpmc_nand_init(&nand_data) < 0)
-			printk(KERN_ERR "Unable to register NAND device\n");
-	}
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-				 int nr_parts)
-{
-}
-#endif

arch/arm/mach-omap2/common-board-devices.h

@@ -10,6 +10,5 @@ struct ads7846_platform_data;
 
 void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 		       struct ads7846_platform_data *board_pdata);
-void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
 
 #endif /* __OMAP_COMMON_BOARD_DEVICES__ */

arch/arm/mach-omap2/gpmc-nand.c

@@ -17,9 +17,12 @@
 
 #include <asm/mach/flash.h>
 
-#include <plat/gpmc.h>
-
+#include "gpmc.h"
 #include "soc.h"
+#include "gpmc-nand.h"
+
+/* minimum size for IO mapping */
+#define	NAND_IO_SIZE	4
 
 static struct resource gpmc_nand_resource[] = {
 	{
@@ -40,41 +43,36 @@ static struct platform_device gpmc_nand_device = {
 	.resource	= gpmc_nand_resource,
 };
 
-static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
+static int omap2_nand_gpmc_retime(
+				struct omap_nand_platform_data *gpmc_nand_data,
+				struct gpmc_timings *gpmc_t)
 {
 	struct gpmc_timings t;
 	int err;
 
-	if (!gpmc_nand_data->gpmc_t)
-		return 0;
-
 	memset(&t, 0, sizeof(t));
-	t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk;
-	t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
-	t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
+	t.sync_clk = gpmc_t->sync_clk;
+	t.cs_on = gpmc_round_ns_to_ticks(gpmc_t->cs_on);
+	t.adv_on = gpmc_round_ns_to_ticks(gpmc_t->adv_on);
 
 	/* Read */
-	t.adv_rd_off = gpmc_round_ns_to_ticks(
-				gpmc_nand_data->gpmc_t->adv_rd_off);
+	t.adv_rd_off = gpmc_round_ns_to_ticks(gpmc_t->adv_rd_off);
 	t.oe_on  = t.adv_on;
-	t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access);
-	t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off);
-	t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off);
-	t.rd_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle);
+	t.access = gpmc_round_ns_to_ticks(gpmc_t->access);
+	t.oe_off = gpmc_round_ns_to_ticks(gpmc_t->oe_off);
+	t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_t->cs_rd_off);
+	t.rd_cycle  = gpmc_round_ns_to_ticks(gpmc_t->rd_cycle);
 
 	/* Write */
-	t.adv_wr_off = gpmc_round_ns_to_ticks(
-				gpmc_nand_data->gpmc_t->adv_wr_off);
+	t.adv_wr_off = gpmc_round_ns_to_ticks(gpmc_t->adv_wr_off);
 	t.we_on  = t.oe_on;
 	if (cpu_is_omap34xx()) {
-	    t.wr_data_mux_bus =	gpmc_round_ns_to_ticks(
-				gpmc_nand_data->gpmc_t->wr_data_mux_bus);
-	    t.wr_access = gpmc_round_ns_to_ticks(
-				gpmc_nand_data->gpmc_t->wr_access);
+	    t.wr_data_mux_bus =	gpmc_round_ns_to_ticks(gpmc_t->wr_data_mux_bus);
+	    t.wr_access = gpmc_round_ns_to_ticks(gpmc_t->wr_access);
 	}
-	t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off);
-	t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
-	t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
+	t.we_off = gpmc_round_ns_to_ticks(gpmc_t->we_off);
+	t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_t->cs_wr_off);
+	t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_t->wr_cycle);
 
 	/* Configure GPMC */
 	if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
@@ -91,7 +89,29 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data
 	return 0;
 }
 
-int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
+static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
+{
+	/* support only OMAP3 class */
+	if (!cpu_is_omap34xx()) {
+		pr_err("BCH ecc is not supported on this CPU\n");
+		return 0;
+	}
+
+	/*
+	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
+	 * Other chips may be added if confirmed to work.
+	 */
+	if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
+	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+		pr_err("BCH 4-bit mode is not supported on this CPU\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
+			  struct gpmc_timings *gpmc_t)
 {
 	int err	= 0;
 	struct device *dev = &gpmc_nand_device.dev;
@@ -112,11 +132,13 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
 				gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
 	gpmc_nand_resource[2].start =
 				gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
-	 /* Set timings in GPMC */
-	err = omap2_nand_gpmc_retime(gpmc_nand_data);
-	if (err < 0) {
-		dev_err(dev, "Unable to set gpmc timings: %d\n", err);
-		return err;
+
+	if (gpmc_t) {
+		err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t);
+		if (err < 0) {
+			dev_err(dev, "Unable to set gpmc timings: %d\n", err);
+			return err;
+		}
 	}
 
 	/* Enable RD PIN Monitoring Reg */
@@ -126,6 +148,9 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
 
 	gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
 
+	if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt))
+		return -EINVAL;
+
 	err = platform_device_register(&gpmc_nand_device);
 	if (err < 0) {
 		dev_err(dev, "Unable to register NAND device\n");

arch/arm/mach-omap2/gpmc-nand.h

+/*
+ *  arch/arm/mach-omap2/gpmc-nand.h
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef	__OMAP2_GPMC_NAND_H
+#define	__OMAP2_GPMC_NAND_H
+
+#include "gpmc.h"
+#include <linux/platform_data/mtd-nand-omap2.h>
+
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d,
+			  struct gpmc_timings *gpmc_t);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
+				 struct gpmc_timings *gpmc_t)
+{
+	return 0;
+}
+#endif
+
+#endif

arch/arm/mach-omap2/gpmc-onenand.h

+/*
+ *  arch/arm/mach-omap2/gpmc-onenand.h
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef	__OMAP2_GPMC_ONENAND_H
+#define	__OMAP2_GPMC_ONENAND_H
+
+#include <linux/platform_data/mtd-onenand-omap2.h>
+
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+#else
+#define board_onenand_data	NULL
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+#endif
+
+#endif

arch/arm/mach-omap2/gpmc-smc91x.c

@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
 
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "gpmc-smc91x.h"
 
 #include "soc.h"

arch/arm/mach-omap2/gpmc-smsc911x.c

@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "gpmc-smsc911x.h"
 
 static struct resource gpmc_smsc911x_resources[] = {

arch/arm/plat-omap/include/plat/gpmc.h → arch/arm/mach-omap2/gpmc.h

@@ -11,6 +11,8 @@
 #ifndef __OMAP2_GPMC_H
 #define __OMAP2_GPMC_H
 
+#include <linux/platform_data/mtd-nand-omap2.h>
+
 /* Maximum Number of Chip Selects */
 #define GPMC_CS_NUM		8
 
@@ -32,15 +34,6 @@
 #define GPMC_SET_IRQ_STATUS	0x00000004
 #define GPMC_CONFIG_WP		0x00000005
 
-#define GPMC_GET_IRQ_STATUS	0x00000006
-#define GPMC_PREFETCH_FIFO_CNT	0x00000007 /* bytes available in FIFO for r/w */
-#define GPMC_PREFETCH_COUNT	0x00000008 /* remaining bytes to be read/write*/
-#define GPMC_STATUS_BUFFER	0x00000009 /* 1: buffer is available to write */
-
-#define GPMC_NAND_COMMAND	0x0000000a
-#define GPMC_NAND_ADDRESS	0x0000000b
-#define GPMC_NAND_DATA		0x0000000c
-
 #define GPMC_ENABLE_IRQ		0x0000000d
 
 /* ECC commands */
@@ -76,25 +69,10 @@
 #define GPMC_DEVICETYPE_NOR		0
 #define GPMC_DEVICETYPE_NAND		2
 #define GPMC_CONFIG_WRITEPROTECT	0x00000010
-#define GPMC_STATUS_BUFF_EMPTY		0x00000001
 #define WR_RD_PIN_MONITORING		0x00600000
-#define GPMC_PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
-#define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
 #define GPMC_IRQ_FIFOEVENTENABLE	0x01
 #define GPMC_IRQ_COUNT_EVENT		0x02
 
-#define PREFETCH_FIFOTHRESHOLD_MAX	0x40
-#define PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
-
-enum omap_ecc {
-		/* 1-bit ecc: stored at end of spare area */
-	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
-	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
-		/* 1-bit ecc: stored at beginning of spare area as romcode */
-	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
-	OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
-	OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
-};
 
 /*
  * Note that all values in this struct are in nanoseconds except sync_clk
@@ -133,22 +111,6 @@ struct gpmc_timings {
 	u16 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
 };
 
-struct gpmc_nand_regs {
-	void __iomem	*gpmc_status;
-	void __iomem	*gpmc_nand_command;
-	void __iomem	*gpmc_nand_address;
-	void __iomem	*gpmc_nand_data;
-	void __iomem	*gpmc_prefetch_config1;
-	void __iomem	*gpmc_prefetch_config2;
-	void __iomem	*gpmc_prefetch_control;
-	void __iomem	*gpmc_prefetch_status;
-	void __iomem	*gpmc_ecc_config;
-	void __iomem	*gpmc_ecc_control;
-	void __iomem	*gpmc_ecc_size_config;
-	void __iomem	*gpmc_ecc1_result;
-	void __iomem	*gpmc_bch_result0;
-};
-
 extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
 extern int gpmc_get_client_irq(unsigned irq_config);
 
@@ -160,31 +122,14 @@ extern unsigned long gpmc_get_fclk_period(void);
 
 extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
 extern u32 gpmc_cs_read_reg(int cs, int idx);
-extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_calc_divider(unsigned int sync_clk);
 extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
 extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
-					unsigned int u32_count, int is_write);
-extern int gpmc_prefetch_reset(int cs);
 extern void omap3_gpmc_save_context(void);
 extern void omap3_gpmc_restore_context(void);
-extern int gpmc_read_status(int cmd);
 extern int gpmc_cs_configure(int cs, int cmd, int wval);
-extern int gpmc_nand_read(int cs, int cmd);
-extern int gpmc_nand_write(int cs, int cmd, int wval);
-
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
-
-#ifdef CONFIG_ARCH_OMAP3
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
-			  int nerrors);
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
-#endif /* CONFIG_ARCH_OMAP3 */
 
 #endif

arch/arm/mach-omap2/pm34xx.c

@@ -40,12 +40,12 @@
 #include "powerdomain.h"
 #include <plat/sdrc.h>
 #include <plat/prcm.h>
-#include <plat/gpmc.h>
 #include <plat-omap/dma-omap.h>
 
 #include "common.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
+#include "gpmc.h"
 #include "prm-regbits-34xx.h"
 
 #include "prm2xxx_3xxx.h"

arch/arm/mach-omap2/usb-tusb6010.c

@@ -18,7 +18,7 @@
 
 #include <linux/usb/musb.h>
 
-#include <plat/gpmc.h>
+#include "gpmc.h"
 
 #include "mux.h"
 

drivers/mtd/nand/omap2.c

@@ -28,7 +28,6 @@
 #endif
 
 #include <plat-omap/dma-omap.h>
-#include <plat/gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 
 #define	DRIVER_NAME	"omap2-nand"
@@ -106,10 +105,16 @@
 #define	CS_MASK				0x7
 #define	ENABLE_PREFETCH			(0x1 << 7)
 #define	DMA_MPU_MODE_SHIFT		2
+#define	ECCSIZE0_SHIFT			12
 #define	ECCSIZE1_SHIFT			22
 #define	ECC1RESULTSIZE			0x1
 #define	ECCCLEAR			0x100
 #define	ECC1				0x1
+#define	PREFETCH_FIFOTHRESHOLD_MAX	0x40
+#define	PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
+#define	PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
+#define	PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
+#define	STATUS_BUFF_EMPTY		0x00000001
 
 #define OMAP24XX_DMA_GPMC		4
 
@@ -271,7 +276,7 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
 		/* wait until buffer is available for write */
 		do {
 			status = readl(info->reg.gpmc_status) &
-					GPMC_STATUS_BUFF_EMPTY;
+					STATUS_BUFF_EMPTY;
 		} while (!status);
 	}
 }
@@ -309,7 +314,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 		/* wait until buffer is available for write */
 		do {
 			status = readl(info->reg.gpmc_status) &
-					GPMC_STATUS_BUFF_EMPTY;
+					STATUS_BUFF_EMPTY;
 		} while (!status);
 	}
 }
@@ -350,7 +355,7 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
 	} else {
 		do {
 			r_count = readl(info->reg.gpmc_prefetch_status);
-			r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count);
+			r_count = PREFETCH_STATUS_FIFO_CNT(r_count);
 			r_count = r_count >> 2;
 			ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
 			p += r_count;
@@ -397,7 +402,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 	} else {
 		while (len) {
 			w_count = readl(info->reg.gpmc_prefetch_status);
-			w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count);
+			w_count = PREFETCH_STATUS_FIFO_CNT(w_count);
 			w_count = w_count >> 1;
 			for (i = 0; (i < w_count) && len; i++, len -= 2)
 				iowrite16(*p++, info->nand.IO_ADDR_W);
@@ -409,7 +414,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 		do {
 			cpu_relax();
 			val = readl(info->reg.gpmc_prefetch_status);
-			val = GPMC_PREFETCH_STATUS_COUNT(val);
+			val = PREFETCH_STATUS_COUNT(val);
 		} while (val && (tim++ < limit));
 
 		/* disable and stop the PFPW engine */
@@ -495,7 +500,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 	do {
 		cpu_relax();
 		val = readl(info->reg.gpmc_prefetch_status);
-		val = GPMC_PREFETCH_STATUS_COUNT(val);
+		val = PREFETCH_STATUS_COUNT(val);
 	} while (val && (tim++ < limit));
 
 	/* disable and stop the PFPW engine */
@@ -558,7 +563,7 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
 	u32 bytes;
 
 	bytes = readl(info->reg.gpmc_prefetch_status);
-	bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
+	bytes = PREFETCH_STATUS_FIFO_CNT(bytes);
 	bytes = bytes  & 0xFFFC; /* io in multiple of 4 bytes */
 	if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
 		if (this_irq == info->gpmc_irq_count)
@@ -684,7 +689,7 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
 	limit = (loops_per_jiffy *  msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
 	do {
 		val = readl(info->reg.gpmc_prefetch_status);
-		val = GPMC_PREFETCH_STATUS_COUNT(val);
+		val = PREFETCH_STATUS_COUNT(val);
 		cpu_relax();
 	} while (val && (tim++ < limit));
 
@@ -998,7 +1003,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
 		cond_resched();
 	}
 
-	status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
+	status = readb(info->reg.gpmc_nand_data);
 	return status;
 }
 
@@ -1031,19 +1036,45 @@ static int omap_dev_ready(struct mtd_info *mtd)
 static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
 {
 	int nerrors;
-	unsigned int dev_width;
+	unsigned int dev_width, nsectors;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
 	struct nand_chip *chip = mtd->priv;
+	u32 val;
 
 	nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
 	dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+	nsectors = 1;
 	/*
 	 * Program GPMC to perform correction on one 512-byte sector at a time.
 	 * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
 	 * gives a slight (5%) performance gain (but requires additional code).
 	 */
-	(void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors);
+
+	writel(ECC1, info->reg.gpmc_ecc_control);
+
+	/*
+	 * When using BCH, sector size is hardcoded to 512 bytes.
+	 * Here we are using wrapping mode 6 both for reading and writing, with:
+	 *  size0 = 0  (no additional protected byte in spare area)
+	 *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+	 */
+	val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT);
+	writel(val, info->reg.gpmc_ecc_size_config);
+
+	/* BCH configuration */
+	val = ((1                        << 16) | /* enable BCH */
+	       (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+	       (0x06                     <<  8) | /* wrap mode = 6 */
+	       (dev_width                <<  7) | /* bus width */
+	       (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
+	       (info->gpmc_cs            <<  1) | /* ECC CS */
+	       (0x1));                            /* enable ECC */
+
+	writel(val, info->reg.gpmc_ecc_config);
+
+	/* clear ecc and enable bits */
+	writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
 }
 
 /**
@@ -1057,7 +1088,32 @@ static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat,
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
-	return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code);
+	unsigned long nsectors, val1, val2;
+	int i;
+
+	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+	for (i = 0; i < nsectors; i++) {
+
+		/* Read hw-computed remainder */
+		val1 = readl(info->reg.gpmc_bch_result0[i]);
+		val2 = readl(info->reg.gpmc_bch_result1[i]);
+
+		/*
+		 * Add constant polynomial to remainder, in order to get an ecc
+		 * sequence of 0xFFs for a buffer filled with 0xFFs; and
+		 * left-justify the resulting polynomial.
+		 */
+		*ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+		*ecc_code++ = 0x13 ^ ((val2 >>  4) & 0xFF);
+		*ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+		*ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+		*ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+		*ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF);
+		*ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4);
+	}
+
+	return 0;
 }
 
 /**
@@ -1071,7 +1127,39 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
-	return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code);
+	unsigned long nsectors, val1, val2, val3, val4;
+	int i;
+
+	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+	for (i = 0; i < nsectors; i++) {
+
+		/* Read hw-computed remainder */
+		val1 = readl(info->reg.gpmc_bch_result0[i]);
+		val2 = readl(info->reg.gpmc_bch_result1[i]);
+		val3 = readl(info->reg.gpmc_bch_result2[i]);
+		val4 = readl(info->reg.gpmc_bch_result3[i]);
+
+		/*
+		 * Add constant polynomial to remainder, in order to get an ecc
+		 * sequence of 0xFFs for a buffer filled with 0xFFs.
+		 */
+		*ecc_code++ = 0xef ^ (val4 & 0xFF);
+		*ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+		*ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+		*ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+		*ecc_code++ = 0xed ^ (val3 & 0xFF);
+		*ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+		*ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+		*ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+		*ecc_code++ = 0x97 ^ (val2 & 0xFF);
+		*ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+		*ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+		*ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+		*ecc_code++ = 0xb5 ^ (val1 & 0xFF);
+	}
+
+	return 0;
 }
 
 /**
@@ -1127,7 +1215,7 @@ static void omap3_free_bch(struct mtd_info *mtd)
  */
 static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
 {
-	int ret, max_errors;
+	int max_errors;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
 #ifdef CONFIG_MTD_NAND_OMAP_BCH8
@@ -1144,11 +1232,6 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
 		goto fail;
 	}
 
-	/* initialize GPMC BCH engine */
-	ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors);
-	if (ret)
-		goto fail;
-
 	/* software bch library is only used to detect and locate errors */
 	info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
 	if (!info->bch)
@@ -1515,7 +1598,7 @@ static int omap_nand_remove(struct platform_device *pdev)
 	/* Release NAND device, its internal structures and partitions */
 	nand_release(&info->mtd);
 	iounmap(info->nand.IO_ADDR_R);
-	release_mem_region(info->phys_base, NAND_IO_SIZE);
+	release_mem_region(info->phys_base, info->mem_size);
 	kfree(info);
 	return 0;
 }

drivers/mtd/onenand/omap2.c

@@ -38,12 +38,10 @@
 #include <linux/regulator/consumer.h>
 
 #include <asm/mach/flash.h>
-#include <plat/gpmc.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 #include <asm/gpio.h>
 
 #include <plat-omap/dma-omap.h>
-#include <plat/cpu.h>
 
 #define DRIVER_NAME "omap2-onenand"
 
@@ -63,6 +61,7 @@ struct omap2_onenand {
 	int freq;
 	int (*setup)(void __iomem *base, int *freq_ptr);
 	struct regulator *regulator;
+	u8 flags;
 };
 
 static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
@@ -155,7 +154,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
 		if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
 			syscfg |= ONENAND_SYS_CFG1_IOBE;
 			write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
-			if (cpu_is_omap34xx())
+			if (c->flags & ONENAND_IN_OMAP34XX)
 				/* Add a delay to let GPIO settle */
 				syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
 		}
@@ -639,6 +638,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 
 	init_completion(&c->irq_done);
 	init_completion(&c->dma_done);
+	c->flags = pdata->flags;
 	c->gpmc_cs = pdata->cs;
 	c->gpio_irq = pdata->gpio_irq;
 	c->dma_channel = pdata->dma_channel;
@@ -729,7 +729,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 	this = &c->onenand;
 	if (c->dma_channel >= 0) {
 		this->wait = omap2_onenand_wait;
-		if (cpu_is_omap34xx()) {
+		if (c->flags & ONENAND_IN_OMAP34XX) {
 			this->read_bufferram = omap3_onenand_read_bufferram;
 			this->write_bufferram = omap3_onenand_write_bufferram;
 		} else {
@@ -803,7 +803,6 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
 	}
 	iounmap(c->onenand.base);
 	release_mem_region(c->phys_base, c->mem_size);
-	gpmc_cs_free(c->gpmc_cs);
 	kfree(c);
 
 	return 0;

include/linux/platform_data/mtd-nand-omap2.h

@@ -8,9 +8,13 @@
  * published by the Free Software Foundation.
  */
 
-#include <plat/gpmc.h>
+#ifndef	_MTD_NAND_OMAP2_H
+#define	_MTD_NAND_OMAP2_H
+
 #include <linux/mtd/partitions.h>
 
+#define	GPMC_BCH_NUM_REMAINDER	8
+
 enum nand_io {
 	NAND_OMAP_PREFETCH_POLLED = 0,	/* prefetch polled mode, default */
 	NAND_OMAP_POLLED,		/* polled mode, without prefetch */
@@ -18,10 +22,38 @@ enum nand_io {
 	NAND_OMAP_PREFETCH_IRQ		/* prefetch enabled irq mode */
 };
 
+enum omap_ecc {
+		/* 1-bit ecc: stored at end of spare area */
+	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+		/* 1-bit ecc: stored at beginning of spare area as romcode */
+	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+	OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
+	OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
+};
+
+struct gpmc_nand_regs {
+	void __iomem	*gpmc_status;
+	void __iomem	*gpmc_nand_command;
+	void __iomem	*gpmc_nand_address;
+	void __iomem	*gpmc_nand_data;
+	void __iomem	*gpmc_prefetch_config1;
+	void __iomem	*gpmc_prefetch_config2;
+	void __iomem	*gpmc_prefetch_control;
+	void __iomem	*gpmc_prefetch_status;
+	void __iomem	*gpmc_ecc_config;
+	void __iomem	*gpmc_ecc_control;
+	void __iomem	*gpmc_ecc_size_config;
+	void __iomem	*gpmc_ecc1_result;
+	void __iomem	*gpmc_bch_result0[GPMC_BCH_NUM_REMAINDER];
+	void __iomem	*gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER];
+	void __iomem	*gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER];
+	void __iomem	*gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER];
+};
+
 struct omap_nand_platform_data {
 	int			cs;
 	struct mtd_partition	*parts;
-	struct gpmc_timings	*gpmc_t;
 	int			nr_parts;
 	bool			dev_ready;
 	enum nand_io		xfer_type;
@@ -30,14 +62,4 @@ struct omap_nand_platform_data {
 	struct gpmc_nand_regs	reg;
 };
 
-/* minimum size for IO mapping */
-#define	NAND_IO_SIZE	4
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
-{
-	return 0;
-}
 #endif

include/linux/platform_data/mtd-onenand-omap2.h

@@ -9,17 +9,15 @@
  * published by the Free Software Foundation.
  */
 
+#ifndef	__MTD_ONENAND_OMAP2_H
+#define	__MTD_ONENAND_OMAP2_H
+
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
 #define ONENAND_SYNC_READ	(1 << 0)
 #define ONENAND_SYNC_READWRITE	(1 << 1)
-
-struct onenand_freq_info {
-	u16			maf_id;
-	u16			dev_id;
-	u16			ver_id;
-};
+#define	ONENAND_IN_OMAP34XX	(1 << 2)
 
 struct omap_onenand_platform_data {
 	int			cs;
@@ -27,27 +25,9 @@ struct omap_onenand_platform_data {
 	struct mtd_partition	*parts;
 	int			nr_parts;
 	int			(*onenand_setup)(void __iomem *, int *freq_ptr);
-	int		(*get_freq)(const struct onenand_freq_info *freq_info,
-				    bool *clk_dep);
 	int			dma_channel;
 	u8			flags;
 	u8			regulator_can_sleep;
 	u8			skip_initial_unlocking;
 };
-
-#define ONENAND_MAX_PARTITIONS 8
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-
-#else
-
-#define board_onenand_data	NULL
-
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-
 #endif