drm/i915/ehl: Use an id of 4 while accessing DPLL4's CR0 and CR1

Although, DPLL4 enable and disable is associated with MGPLL1_ENABLE
register, we can use ICL_DPLL_CFGCR0/CR1 macros to access this dpll's
CR0 and CR1 registers by passing an id of 4 to these macros.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717021316.18610-1-vivek.kasireddy@intel.com

drivers/gpu/drm/i915/display/intel_dpll_mgr.c

@@ -3127,8 +3127,13 @@ static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,
 		hw_state->cfgcr0 = I915_READ(TGL_DPLL_CFGCR0(id));
 		hw_state->cfgcr1 = I915_READ(TGL_DPLL_CFGCR1(id));
 	} else {
-		hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(id));
-		hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(id));
+		if (IS_ELKHARTLAKE(dev_priv) && id == DPLL_ID_EHL_DPLL4) {
+			hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(4));
+			hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(4));
+		} else {
+			hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(id));
+			hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(id));
+		}
 	}
 
 	ret = true;
@@ -3169,8 +3174,13 @@ static void icl_dpll_write(struct drm_i915_private *dev_priv,
 		cfgcr0_reg = TGL_DPLL_CFGCR0(id);
 		cfgcr1_reg = TGL_DPLL_CFGCR1(id);
 	} else {
-		cfgcr0_reg = ICL_DPLL_CFGCR0(id);
-		cfgcr1_reg = ICL_DPLL_CFGCR1(id);
+		if (IS_ELKHARTLAKE(dev_priv) && id == DPLL_ID_EHL_DPLL4) {
+			cfgcr0_reg = ICL_DPLL_CFGCR0(4);
+			cfgcr1_reg = ICL_DPLL_CFGCR1(4);
+		} else {
+			cfgcr0_reg = ICL_DPLL_CFGCR0(id);
+			cfgcr1_reg = ICL_DPLL_CFGCR1(id);
+		}
 	}
 
 	I915_WRITE(cfgcr0_reg, hw_state->cfgcr0);