Commit 9a45eb69 authored by Josh Cartwright's avatar Josh Cartwright Committed by Michal Simek

ARM: zynq: add support for ARCH_MULTIPLATFORM

The majority of changes are necessary to remove dependencies on header
files within arch/arm/mach-zynq/include/mach:

  uncompress.h
    - Deleted. It is unused for ARCH_MULTIPLATFORM builds.

  uart.h:
    - Move uart definitions out of uart.h into debug/zynq.S, which is
      now the only user

  zynq_soc.h:
    - Move SCU address definitions into common.c.
    - Other #defines, such as PERIPHERAL_CLOCK_RATE, TTC0_BASE, etc, are
      unused and can be dropped
Signed-off-by: default avatarJosh Cartwright <josh.cartwright@ni.com>
Tested-by: default avatarMichal Simek <michal.simek@xilinx.com>
parent 385f02b1
...@@ -955,18 +955,6 @@ config ARCH_VT8500 ...@@ -955,18 +955,6 @@ config ARCH_VT8500
help help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform"
select ARM_AMBA
select ARM_GIC
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select ICST
select MIGHT_HAVE_CACHE_L2X0
select USE_OF
help
Support for Xilinx Zynq ARM Cortex A9 Platform
endchoice endchoice
menu "Multiple platform selection" menu "Multiple platform selection"
...@@ -1128,6 +1116,8 @@ source "arch/arm/plat-versatile/Kconfig" ...@@ -1128,6 +1116,8 @@ source "arch/arm/plat-versatile/Kconfig"
source "arch/arm/mach-w90x900/Kconfig" source "arch/arm/mach-w90x900/Kconfig"
source "arch/arm/mach-zynq/Kconfig"
# Definitions to make life easier # Definitions to make life easier
config ARCH_ACORN config ARCH_ACORN
bool bool
......
...@@ -12,9 +12,25 @@ ...@@ -12,9 +12,25 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details. * GNU General Public License for more details.
*/ */
#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */
#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */
#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */
#include <mach/zynq_soc.h> #define UART_SR_TXFULL 0x00000010 /* TX FIFO full */
#include <mach/uart.h> #define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
#define UART0_PHYS 0xE0000000
#define UART1_PHYS 0xE0001000
#define UART_SIZE SZ_4K
#define UART_VIRT 0xF0001000
#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
# define LL_UART_PADDR UART1_PHYS
#else
# define LL_UART_PADDR UART0_PHYS
#endif
#define LL_UART_VADDR UART_VIRT
.macro addruart, rp, rv, tmp .macro addruart, rp, rv, tmp
ldr \rp, =LL_UART_PADDR @ physical ldr \rp, =LL_UART_PADDR @ physical
......
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select ICST
select MIGHT_HAVE_CACHE_L2X0
select USE_OF
select SPARSE_IRQ
help
Support for Xilinx Zynq ARM Cortex A9 Platform
...@@ -30,10 +30,10 @@ ...@@ -30,10 +30,10 @@
#include <asm/mach/time.h> #include <asm/mach/time.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/page.h> #include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h> #include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h> #include <asm/hardware/cache-l2x0.h>
#include <mach/zynq_soc.h>
#include "common.h" #include "common.h"
static struct of_device_id zynq_of_bus_ids[] __initdata = { static struct of_device_id zynq_of_bus_ids[] __initdata = {
...@@ -68,9 +68,9 @@ static void __init xilinx_irq_init(void) ...@@ -68,9 +68,9 @@ static void __init xilinx_irq_init(void)
of_irq_init(irq_match); of_irq_init(irq_match);
} }
/* The minimum devices needed to be mapped before the VM system is up and #define SCU_PERIPH_PHYS 0xF8F00000
* running include the GIC, UART and Timer Counter. #define SCU_PERIPH_SIZE SZ_8K
*/ #define SCU_PERIPH_VIRT (VMALLOC_END - SCU_PERIPH_SIZE)
static struct map_desc scu_desc __initdata = { static struct map_desc scu_desc __initdata = {
.virtual = SCU_PERIPH_VIRT, .virtual = SCU_PERIPH_VIRT,
......
/* arch/arm/mach-zynq/include/mach/uart.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_UART_H__
#define __MACH_UART_H__
#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */
#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */
#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */
#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */
#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
#endif
/* arch/arm/mach-zynq/include/mach/uncompress.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_UNCOMPRESS_H__
#define __MACH_UNCOMPRESS_H__
#include <linux/io.h>
#include <asm/processor.h>
#include <mach/zynq_soc.h>
#include <mach/uart.h>
void arch_decomp_setup(void)
{
}
static inline void flush(void)
{
/*
* Wait while the FIFO is not empty
*/
while (!(__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
UART_SR_TXEMPTY))
cpu_relax();
}
#define arch_decomp_wdog()
static void putc(char ch)
{
/*
* Wait for room in the FIFO, then write the char into the FIFO
*/
while (__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
UART_SR_TXFULL)
cpu_relax();
__raw_writel(ch, IOMEM(LL_UART_PADDR + UART_FIFO_OFFSET));
}
#endif
/* arch/arm/mach-zynq/include/mach/zynq_soc.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_XILINX_SOC_H__
#define __MACH_XILINX_SOC_H__
#include <asm/pgtable.h>
#define PERIPHERAL_CLOCK_RATE 2500000
/* Static peripheral mappings are mapped at the top of the vmalloc region. The
* early uart mapping causes intermediate problems/failure at certain
* addresses, including the very top of the vmalloc region. Map it at an
* address that is known to work.
*/
#define UART0_PHYS 0xE0000000
#define UART1_PHYS 0xE0001000
#define UART_SIZE SZ_4K
#define UART_VIRT 0xF0001000
#define SCU_PERIPH_PHYS 0xF8F00000
#define SCU_PERIPH_SIZE SZ_8K
#define SCU_PERIPH_VIRT (VMALLOC_END - SCU_PERIPH_SIZE)
#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
# define LL_UART_PADDR UART1_PHYS
#else
# define LL_UART_PADDR UART0_PHYS
#endif
#define LL_UART_VADDR UART_VIRT
/* The following are intended for the devices that are mapped early */
#define TTC0_BASE IOMEM(TTC0_VIRT)
#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT)
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment