libata-sff: make BMDMA optional

Make BMDMA optional depending on new config variable CONFIG_ATA_BMDMA.
In Kconfig, drivers are grouped into five groups - non-SFF native, SFF
w/ custom DMA interface, SFF w/ BMDMA, PIO-only SFF, and generic
fallback / legacy ones.  Kconfig and Makefile are reorganized
according to the groups and ordered alphabetically inside each group.

ata_ioports.bmdma_addr and ata_port.bmdma_prd[_dma] are put into
CONFIG_ATA_BMDMA, as are all bmdma related ops, variables and
functions.

This increase the binary size slightly when BMDMA is enabled but on
both native-only and PIO-only configurations the size is slightly
reduced.  Either way, the size difference is insignificant.  This
change is more meaningful to signify the separation between SFF and
BMDMA and as a tool to verify the separation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

drivers/ata/Makefile

 
 obj-$(CONFIG_ATA)		+= libata.o
 
+# non-SFF interface
 obj-$(CONFIG_SATA_AHCI)		+= ahci.o libahci.o
 obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
-obj-$(CONFIG_SATA_SVW)		+= sata_svw.o
+obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
+obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
+obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
+
+# SFF w/ custom DMA
+obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
+obj-$(CONFIG_PATA_MPC52xx)	+= pata_mpc52xx.o
+obj-$(CONFIG_PATA_OCTEON_CF)	+= pata_octeon_cf.o
+obj-$(CONFIG_SATA_QSTOR)	+= sata_qstor.o
+obj-$(CONFIG_SATA_SX4)		+= sata_sx4.o
+
+# SFF SATA w/ BMDMA
 obj-$(CONFIG_ATA_PIIX)		+= ata_piix.o
+obj-$(CONFIG_SATA_MV)		+= sata_mv.o
+obj-$(CONFIG_SATA_NV)		+= sata_nv.o
 obj-$(CONFIG_SATA_PROMISE)	+= sata_promise.o
-obj-$(CONFIG_SATA_QSTOR)	+= sata_qstor.o
 obj-$(CONFIG_SATA_SIL)		+= sata_sil.o
-obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
-obj-$(CONFIG_SATA_VIA)		+= sata_via.o
-obj-$(CONFIG_SATA_VITESSE)	+= sata_vsc.o
 obj-$(CONFIG_SATA_SIS)		+= sata_sis.o
-obj-$(CONFIG_SATA_SX4)		+= sata_sx4.o
-obj-$(CONFIG_SATA_NV)		+= sata_nv.o
+obj-$(CONFIG_SATA_SVW)		+= sata_svw.o
 obj-$(CONFIG_SATA_ULI)		+= sata_uli.o
-obj-$(CONFIG_SATA_MV)		+= sata_mv.o
-obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
-obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
-obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
-obj-$(CONFIG_PATA_MACIO)	+= pata_macio.o
+obj-$(CONFIG_SATA_VIA)		+= sata_via.o
+obj-$(CONFIG_SATA_VITESSE)	+= sata_vsc.o
 
+# SFF PATA w/ BMDMA
 obj-$(CONFIG_PATA_ALI)		+= pata_ali.o
 obj-$(CONFIG_PATA_AMD)		+= pata_amd.o
 obj-$(CONFIG_PATA_ARTOP)	+= pata_artop.o
-obj-$(CONFIG_PATA_ATP867X)	+= pata_atp867x.o
-obj-$(CONFIG_PATA_AT32)		+= pata_at32.o
 obj-$(CONFIG_PATA_ATIIXP)	+= pata_atiixp.o
-obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
+obj-$(CONFIG_PATA_ATP867X)	+= pata_atp867x.o
+obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
 obj-$(CONFIG_PATA_CMD64X)	+= pata_cmd64x.o
 obj-$(CONFIG_PATA_CS5520)	+= pata_cs5520.o
 obj-$(CONFIG_PATA_CS5530)	+= pata_cs5530.o
@@ -39,47 +45,50 @@ obj-$(CONFIG_PATA_HPT366)	+= pata_hpt366.o
 obj-$(CONFIG_PATA_HPT37X)	+= pata_hpt37x.o
 obj-$(CONFIG_PATA_HPT3X2N)	+= pata_hpt3x2n.o
 obj-$(CONFIG_PATA_HPT3X3)	+= pata_hpt3x3.o
-obj-$(CONFIG_PATA_ISAPNP)	+= pata_isapnp.o
-obj-$(CONFIG_PATA_IT821X)	+= pata_it821x.o
+obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
 obj-$(CONFIG_PATA_IT8213)	+= pata_it8213.o
+obj-$(CONFIG_PATA_IT821X)	+= pata_it821x.o
 obj-$(CONFIG_PATA_JMICRON)	+= pata_jmicron.o
+obj-$(CONFIG_PATA_MACIO)	+= pata_macio.o
+obj-$(CONFIG_PATA_MARVELL)	+= pata_marvell.o
 obj-$(CONFIG_PATA_NETCELL)	+= pata_netcell.o
 obj-$(CONFIG_PATA_NINJA32)	+= pata_ninja32.o
-obj-$(CONFIG_PATA_NS87410)	+= pata_ns87410.o
 obj-$(CONFIG_PATA_NS87415)	+= pata_ns87415.o
-obj-$(CONFIG_PATA_OPTI)		+= pata_opti.o
-obj-$(CONFIG_PATA_OPTIDMA)	+= pata_optidma.o
-obj-$(CONFIG_PATA_MPC52xx)	+= pata_mpc52xx.o
-obj-$(CONFIG_PATA_MARVELL)	+= pata_marvell.o
-obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
 obj-$(CONFIG_PATA_OLDPIIX)	+= pata_oldpiix.o
-obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld.o
-obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
+obj-$(CONFIG_PATA_OPTIDMA)	+= pata_optidma.o
 obj-$(CONFIG_PATA_PDC2027X)	+= pata_pdc2027x.o
 obj-$(CONFIG_PATA_PDC_OLD)	+= pata_pdc202xx_old.o
-obj-$(CONFIG_PATA_QDI)		+= pata_qdi.o
 obj-$(CONFIG_PATA_RADISYS)	+= pata_radisys.o
-obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
 obj-$(CONFIG_PATA_RDC)		+= pata_rdc.o
-obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
 obj-$(CONFIG_PATA_SC1200)	+= pata_sc1200.o
+obj-$(CONFIG_PATA_SCC)		+= pata_scc.o
+obj-$(CONFIG_PATA_SCH)		+= pata_sch.o
 obj-$(CONFIG_PATA_SERVERWORKS)	+= pata_serverworks.o
 obj-$(CONFIG_PATA_SIL680)	+= pata_sil680.o
+obj-$(CONFIG_PATA_SIS)		+= pata_sis.o
 obj-$(CONFIG_PATA_TOSHIBA)	+= pata_piccolo.o
+obj-$(CONFIG_PATA_TRIFLEX)	+= pata_triflex.o
 obj-$(CONFIG_PATA_VIA)		+= pata_via.o
 obj-$(CONFIG_PATA_WINBOND)	+= pata_sl82c105.o
-obj-$(CONFIG_PATA_WINBOND_VLB)	+= pata_winbond.o
-obj-$(CONFIG_PATA_SIS)		+= pata_sis.o
-obj-$(CONFIG_PATA_TRIFLEX)	+= pata_triflex.o
+
+# SFF PIO only
+obj-$(CONFIG_PATA_AT32)		+= pata_at32.o
+obj-$(CONFIG_PATA_AT91)		+= pata_at91.o
+obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
+obj-$(CONFIG_PATA_ISAPNP)	+= pata_isapnp.o
 obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp4xx_cf.o
-obj-$(CONFIG_PATA_SCC)		+= pata_scc.o
-obj-$(CONFIG_PATA_SCH)		+= pata_sch.o
-obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
-obj-$(CONFIG_PATA_OCTEON_CF)	+= pata_octeon_cf.o
+obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
+obj-$(CONFIG_PATA_NS87410)	+= pata_ns87410.o
+obj-$(CONFIG_PATA_OPTI)		+= pata_opti.o
+obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
+obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld.o
 obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
-obj-$(CONFIG_PATA_AT91)	+= pata_at91.o
 obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
-obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
+obj-$(CONFIG_PATA_QDI)		+= pata_qdi.o
+obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
+obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
+obj-$(CONFIG_PATA_WINBOND_VLB)	+= pata_winbond.o
+
 # Should be last but two libata driver
 obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
 # Should be last but one libata driver

drivers/ata/libata-sff.c

@@ -798,11 +798,15 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
 	case ATAPI_PROT_NODATA:
 		ap->hsm_task_state = HSM_ST_LAST;
 		break;
+#ifdef CONFIG_ATA_BMDMA
 	case ATAPI_PROT_DMA:
 		ap->hsm_task_state = HSM_ST_LAST;
 		/* initiate bmdma */
 		ap->ops->bmdma_start(qc);
 		break;
+#endif /* CONFIG_ATA_BMDMA */
+	default:
+		BUG();
 	}
 }
 
@@ -2535,6 +2539,12 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
 
 #endif /* CONFIG_PCI */
 
+/*
+ *	BMDMA support
+ */
+
+#ifdef CONFIG_ATA_BMDMA
+
 const struct ata_port_operations ata_bmdma_port_ops = {
 	.inherits		= &ata_sff_port_ops,
 
@@ -3287,6 +3297,7 @@ int ata_pci_bmdma_init_one(struct pci_dev *pdev,
 EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one);
 
 #endif /* CONFIG_PCI */
+#endif /* CONFIG_ATA_BMDMA */
 
 /**
  *	ata_sff_port_init - Initialize SFF/BMDMA ATA port

include/linux/libata.h

@@ -513,7 +513,9 @@ struct ata_ioports {
 	void __iomem		*command_addr;
 	void __iomem		*altstatus_addr;
 	void __iomem		*ctl_addr;
+#ifdef CONFIG_ATA_BMDMA
 	void __iomem		*bmdma_addr;
+#endif /* CONFIG_ATA_BMDMA */
 	void __iomem		*scr_addr;
 };
 #endif /* CONFIG_ATA_SFF */
@@ -721,8 +723,10 @@ struct ata_port {
 	u8			ctl;	/* cache of ATA control register */
 	u8			last_ctl;	/* Cache last written value */
 	struct delayed_work	sff_pio_task;
+#ifdef CONFIG_ATA_BMDMA
 	struct ata_bmdma_prd	*bmdma_prd;	/* BMDMA SG list */
 	dma_addr_t		bmdma_prd_dma;	/* and its DMA mapping */
+#endif /* CONFIG_ATA_BMDMA */
 #endif /* CONFIG_ATA_SFF */
 
 	unsigned int		pio_mask;
@@ -856,10 +860,12 @@ struct ata_port_operations {
 	void (*sff_irq_clear)(struct ata_port *);
 	void (*sff_drain_fifo)(struct ata_queued_cmd *qc);
 
+#ifdef CONFIG_ATA_BMDMA
 	void (*bmdma_setup)(struct ata_queued_cmd *qc);
 	void (*bmdma_start)(struct ata_queued_cmd *qc);
 	void (*bmdma_stop)(struct ata_queued_cmd *qc);
 	u8   (*bmdma_status)(struct ata_port *ap);
+#endif /* CONFIG_ATA_BMDMA */
 #endif /* CONFIG_ATA_SFF */
 
 	ssize_t (*em_show)(struct ata_port *ap, char *buf);
@@ -1555,7 +1561,6 @@ extern void sata_pmp_error_handler(struct ata_port *ap);
 #ifdef CONFIG_ATA_SFF
 
 extern const struct ata_port_operations ata_sff_port_ops;
-extern const struct ata_port_operations ata_bmdma_port_ops;
 extern const struct ata_port_operations ata_bmdma32_port_ops;
 
 /* PIO only, sg_tablesize and dma_boundary limits can be removed */
@@ -1564,11 +1569,6 @@ extern const struct ata_port_operations ata_bmdma32_port_ops;
 	.sg_tablesize		= LIBATA_MAX_PRD,		\
 	.dma_boundary		= ATA_DMA_BOUNDARY
 
-#define ATA_BMDMA_SHT(drv_name)					\
-	ATA_BASE_SHT(drv_name),					\
-	.sg_tablesize		= LIBATA_MAX_PRD,		\
-	.dma_boundary		= ATA_DMA_BOUNDARY
-
 extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
 extern u8 ata_sff_check_status(struct ata_port *ap);
 extern void ata_sff_pause(struct ata_port *ap);
@@ -1625,6 +1625,15 @@ extern int ata_pci_sff_init_one(struct pci_dev *pdev,
 		struct scsi_host_template *sht, void *host_priv, int hflags);
 #endif /* CONFIG_PCI */
 
+#ifdef CONFIG_ATA_BMDMA
+
+extern const struct ata_port_operations ata_bmdma_port_ops;
+
+#define ATA_BMDMA_SHT(drv_name)					\
+	ATA_BASE_SHT(drv_name),					\
+	.sg_tablesize		= LIBATA_MAX_PRD,		\
+	.dma_boundary		= ATA_DMA_BOUNDARY
+
 extern void ata_bmdma_qc_prep(struct ata_queued_cmd *qc);
 extern unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc);
 extern void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc);
@@ -1652,6 +1661,7 @@ extern int ata_pci_bmdma_init_one(struct pci_dev *pdev,
 				  struct scsi_host_template *sht,
 				  void *host_priv, int hflags);
 #endif /* CONFIG_PCI */
+#endif /* CONFIG_ATA_BMDMA */
 
 /**
  *	ata_sff_busy_wait - Wait for a port status register