arm64: dts: qcom: sdm845: Define iommus for USB controllers

The USB controllers need to be associated with their respective IOMMU
bank, so define this on the dwc3 nodes.

Also add dma-ranges to the qcom-dwc3 nodes to make the bus' DMA mask
propagate to the dwc3 controller instances.

Fixes: 4429e575 ("arm64: dts: sdm845: Add node for arm,mmu-500")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

arch/arm64/boot/dts/qcom/sdm845.dtsi

@@ -1635,6 +1635,7 @@ usb_1: usb@a6f8800 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			dma-ranges;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -1663,6 +1664,7 @@ usb_1_dwc3: dwc3@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x740 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
@@ -1677,6 +1679,7 @@ usb_2: usb@a8f8800 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			dma-ranges;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
 				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
@@ -1705,6 +1708,7 @@ usb_2_dwc3: dwc3@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a800000 0 0xcd00>;
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;