drm/i915: ironlake_write_eld code cleanup

Use _PIPE macro to get correct register definition for IBX/CPT, discard
old variable "i" way.
Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Added the DIP_PORT_SEL #define from a preceeding patch in the
series that needs more work.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -4247,7 +4247,15 @@
 #define G4X_HDMIW_HDMIEDID		0x6210C
 
 #define IBX_HDMIW_HDMIEDID_A		0xE2050
+#define IBX_HDMIW_HDMIEDID_B		0xE2150
+#define IBX_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \
+					IBX_HDMIW_HDMIEDID_A, \
+					IBX_HDMIW_HDMIEDID_B)
 #define IBX_AUD_CNTL_ST_A		0xE20B4
+#define IBX_AUD_CNTL_ST_B		0xE21B4
+#define IBX_AUD_CNTL_ST(pipe) _PIPE(pipe, \
+					IBX_AUD_CNTL_ST_A, \
+					IBX_AUD_CNTL_ST_B)
 #define IBX_ELD_BUFFER_SIZE		(0x1f << 10)
 #define IBX_ELD_ADDRESS			(0x1f << 5)
 #define IBX_ELD_ACK			(1 << 4)
@@ -4256,7 +4264,15 @@
 #define IBX_CP_READYB			(1 << 1)
 
 #define CPT_HDMIW_HDMIEDID_A		0xE5050
+#define CPT_HDMIW_HDMIEDID_B		0xE5150
+#define CPT_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \
+					CPT_HDMIW_HDMIEDID_A, \
+					CPT_HDMIW_HDMIEDID_B)
 #define CPT_AUD_CNTL_ST_A		0xE50B4
+#define CPT_AUD_CNTL_ST_B		0xE51B4
+#define CPT_AUD_CNTL_ST(pipe) _PIPE(pipe, \
+					CPT_AUD_CNTL_ST_A, \
+					CPT_AUD_CNTL_ST_B)
 #define CPT_AUD_CNTRL_ST2		0xE50C0
 
 /* These are the 4 32-bit write offset registers for each stream
@@ -4266,7 +4282,15 @@
 #define GEN7_SO_WRITE_OFFSET(n)		(0x5280 + (n) * 4)
 
 #define IBX_AUD_CONFIG_A			0xe2000
+#define IBX_AUD_CONFIG_B			0xe2100
+#define IBX_AUD_CFG(pipe) _PIPE(pipe, \
+					IBX_AUD_CONFIG_A, \
+					IBX_AUD_CONFIG_B)
 #define CPT_AUD_CONFIG_A			0xe5000
+#define CPT_AUD_CONFIG_B			0xe5100
+#define CPT_AUD_CFG(pipe) _PIPE(pipe, \
+					CPT_AUD_CONFIG_A, \
+					CPT_AUD_CONFIG_B)
 #define   AUD_CONFIG_N_VALUE_INDEX		(1 << 29)
 #define   AUD_CONFIG_N_PROG_ENABLE		(1 << 28)
 #define   AUD_CONFIG_UPPER_N_SHIFT		20
@@ -4302,6 +4326,7 @@
 #define   AUD_DIG_CNVT(pipe) _PIPE(pipe, \
 					HSW_AUD_DIG_CNVT_1, \
 					HSW_AUD_DIG_CNVT_2)
+#define   DIP_PORT_SEL_MASK		0x3
 
 #define   HSW_AUD_EDID_DATA_A		0x65050
 #define   HSW_AUD_EDID_DATA_B		0x65150

drivers/gpu/drm/i915/intel_display.c

@@ -5078,28 +5078,24 @@ static void ironlake_write_eld(struct drm_connector *connector,
 	int aud_config;
 	int aud_cntl_st;
 	int aud_cntrl_st2;
+	int pipe = to_intel_crtc(crtc)->pipe;
 
 	if (HAS_PCH_IBX(connector->dev)) {
-		hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
-		aud_config = IBX_AUD_CONFIG_A;
-		aud_cntl_st = IBX_AUD_CNTL_ST_A;
+		hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe);
+		aud_config = IBX_AUD_CFG(pipe);
+		aud_cntl_st = IBX_AUD_CNTL_ST(pipe);
 		aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
 	} else {
-		hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
-		aud_config = CPT_AUD_CONFIG_A;
-		aud_cntl_st = CPT_AUD_CNTL_ST_A;
+		hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe);
+		aud_config = CPT_AUD_CFG(pipe);
+		aud_cntl_st = CPT_AUD_CNTL_ST(pipe);
 		aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
 	}
 
-	i = to_intel_crtc(crtc)->pipe;
-	hdmiw_hdmiedid += i * 0x100;
-	aud_cntl_st += i * 0x100;
-	aud_config += i * 0x100;
-
-	DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i));
+	DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
 
 	i = I915_READ(aud_cntl_st);
-	i = (i >> 29) & 0x3;		/* DIP_Port_Select, 0x1 = PortB */
+	i = (i >> 29) & DIP_PORT_SEL_MASK;		/* DIP_Port_Select, 0x1 = PortB */
 	if (!i) {
 		DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
 		/* operate blindly on all ports */