Commit 9ba00856 authored by Hans de Goede's avatar Hans de Goede Committed by Mark Brown

ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detect

The HP Elitepad 1000 G2 tablet has 2 headset jacks:

1. on the dock which uses the output of the codecs built-in HP-amp +
the standard IN2 input which is always used with the headset-jack.

2. on the tablet itself, this uses the line-out of the codec + an external
HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for
the headset-mic.

The codec's GPIO1 is also its only IRQ output pin, so this means that
the codec's IRQ cannot be used on this tablet. Instead the jack-detect
is connected directly to GPIOs on the main SoC. The dock has a helper
chip which also detects if a headset-mic is present or not, so there
are 2 GPIOs for the jack-detect status of the dock. The tablet jack
uses a single GPIO which indicates if a jack is present or not.

Differentiating between headphones vs a headset on the tablet jack
is done by using the usual mic-bias over-current-detection mechanism.

Add support for this unique setup, this support gets enabled on this
tablet through a new BYT_RT5640_JD_HP_ELITEP_1000G2 quirk.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213415Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Acked-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-7-hdegoede@redhat.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 0a61bcbb
......@@ -18,6 +18,8 @@
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/dmi.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/machine.h>
#include <linux/input.h>
#include <linux/slab.h>
#include <sound/pcm.h>
......@@ -76,6 +78,7 @@ enum {
#define BYT_RT5640_LINEOUT BIT(25)
#define BYT_RT5640_LINEOUT_AS_HP2 BIT(26)
#define BYT_RT5640_HSMIC2_ON_IN1 BIT(27)
#define BYT_RT5640_JD_HP_ELITEP_1000G2 BIT(28)
#define BYTCR_INPUT_DEFAULTS \
(BYT_RT5640_IN3_MAP | \
......@@ -89,6 +92,8 @@ enum {
struct byt_rt5640_private {
struct snd_soc_jack jack;
struct snd_soc_jack jack2;
struct gpio_desc *hsmic_detect;
struct clk *mclk;
struct device *codec_dev;
};
......@@ -141,6 +146,8 @@ static void log_quirks(struct device *dev)
}
if (byt_rt5640_quirk & BYT_RT5640_JD_NOT_INV)
dev_info(dev, "quirk JD_NOT_INV enabled\n");
if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2)
dev_info(dev, "quirk JD_HP_ELITEPAD_1000G2 enabled\n");
if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER)
dev_info(dev, "quirk MONO_SPEAKER enabled\n");
if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)
......@@ -446,6 +453,75 @@ static struct snd_soc_jack_pin rt5640_pins[] = {
},
};
static struct snd_soc_jack_pin rt5640_pins2[] = {
{
/* The 2nd headset jack uses lineout with an external HP-amp */
.pin = "Line Out",
.mask = SND_JACK_HEADPHONE,
},
{
.pin = "Headset Mic 2",
.mask = SND_JACK_MICROPHONE,
},
};
struct snd_soc_jack_gpio rt5640_jack_gpio = {
.name = "hp-detect",
.report = SND_JACK_HEADSET,
.invert = true,
.debounce_time = 200,
};
struct snd_soc_jack_gpio rt5640_jack2_gpio = {
.name = "hp2-detect",
.report = SND_JACK_HEADSET,
.invert = true,
.debounce_time = 200,
};
static const struct acpi_gpio_params acpi_gpio0 = { 0, 0, false };
static const struct acpi_gpio_params acpi_gpio1 = { 1, 0, false };
static const struct acpi_gpio_params acpi_gpio2 = { 2, 0, false };
static const struct acpi_gpio_mapping byt_rt5640_hp_elitepad_1000g2_gpios[] = {
{ "hp-detect-gpios", &acpi_gpio0, 1, },
{ "headset-mic-detect-gpios", &acpi_gpio1, 1, },
{ "hp2-detect-gpios", &acpi_gpio2, 1, },
{ },
};
int byt_rt5640_hp_elitepad_1000g2_jack1_check(void *data)
{
struct byt_rt5640_private *priv = data;
int jack_status, mic_status;
jack_status = gpiod_get_value_cansleep(rt5640_jack_gpio.desc);
if (jack_status)
return 0;
mic_status = gpiod_get_value_cansleep(priv->hsmic_detect);
if (mic_status)
return SND_JACK_HEADPHONE;
else
return SND_JACK_HEADSET;
}
int byt_rt5640_hp_elitepad_1000g2_jack2_check(void *data)
{
struct snd_soc_component *component = data;
int jack_status, report;
jack_status = gpiod_get_value_cansleep(rt5640_jack2_gpio.desc);
if (jack_status)
return 0;
rt5640_enable_micbias1_for_ovcd(component);
report = rt5640_detect_headset(component, rt5640_jack2_gpio.desc);
rt5640_disable_micbias1_for_ovcd(component);
return report;
}
static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
......@@ -657,7 +733,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
BYT_RT5640_MCLK_EN |
BYT_RT5640_LINEOUT |
BYT_RT5640_LINEOUT_AS_HP2 |
BYT_RT5640_HSMIC2_ON_IN1),
BYT_RT5640_HSMIC2_ON_IN1 |
BYT_RT5640_JD_HP_ELITEP_1000G2),
},
{ /* HP Pavilion x2 10-k0XX, 10-n0XX */
.matches = {
......@@ -1180,9 +1257,53 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
snd_soc_component_set_jack(component, &priv->jack, NULL);
}
if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) {
ret = snd_soc_card_jack_new(card, "Headset",
SND_JACK_HEADSET,
&priv->jack, rt5640_pins,
ARRAY_SIZE(rt5640_pins));
if (ret)
return ret;
ret = snd_soc_card_jack_new(card, "Headset 2",
SND_JACK_HEADSET,
&priv->jack2, rt5640_pins2,
ARRAY_SIZE(rt5640_pins2));
if (ret)
return ret;
rt5640_jack_gpio.data = priv;
rt5640_jack_gpio.gpiod_dev = priv->codec_dev;
rt5640_jack_gpio.jack_status_check = byt_rt5640_hp_elitepad_1000g2_jack1_check;
ret = snd_soc_jack_add_gpios(&priv->jack, 1, &rt5640_jack_gpio);
if (ret)
return ret;
rt5640_set_ovcd_params(component);
rt5640_jack2_gpio.data = component;
rt5640_jack2_gpio.gpiod_dev = priv->codec_dev;
rt5640_jack2_gpio.jack_status_check = byt_rt5640_hp_elitepad_1000g2_jack2_check;
ret = snd_soc_jack_add_gpios(&priv->jack2, 1, &rt5640_jack2_gpio);
if (ret) {
snd_soc_jack_free_gpios(&priv->jack, 1, &rt5640_jack_gpio);
return ret;
}
}
return 0;
}
static void byt_rt5640_exit(struct snd_soc_pcm_runtime *runtime)
{
struct snd_soc_card *card = runtime->card;
struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) {
snd_soc_jack_free_gpios(&priv->jack2, 1, &rt5640_jack2_gpio);
snd_soc_jack_free_gpios(&priv->jack, 1, &rt5640_jack_gpio);
}
}
static int byt_rt5640_codec_fixup(struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_hw_params *params)
{
......@@ -1295,6 +1416,7 @@ static struct snd_soc_dai_link byt_rt5640_dais[] = {
.dpcm_playback = 1,
.dpcm_capture = 1,
.init = byt_rt5640_init,
.exit = byt_rt5640_exit,
.ops = &byt_rt5640_be_ssp2_ops,
SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform),
},
......@@ -1498,10 +1620,24 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
priv->codec_dev = get_device(codec_dev);
if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) {
acpi_dev_add_driver_gpios(ACPI_COMPANION(priv->codec_dev),
byt_rt5640_hp_elitepad_1000g2_gpios);
priv->hsmic_detect = devm_fwnode_gpiod_get(&pdev->dev, codec_dev->fwnode,
"headset-mic-detect", GPIOD_IN,
"headset-mic-detect");
if (IS_ERR(priv->hsmic_detect)) {
ret_val = PTR_ERR(priv->hsmic_detect);
dev_err_probe(&pdev->dev, ret_val, "getting hsmic-detect GPIO\n");
goto err_device;
}
}
/* Must be called before register_card, also see declaration comment. */
ret_val = byt_rt5640_add_codec_device_props(codec_dev, priv);
if (ret_val)
goto err_device;
goto err_remove_gpios;
log_quirks(&pdev->dev);
......@@ -1605,6 +1741,9 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
err:
device_remove_software_node(priv->codec_dev);
err_remove_gpios:
if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2)
acpi_dev_remove_driver_gpios(ACPI_COMPANION(priv->codec_dev));
err_device:
put_device(priv->codec_dev);
return ret_val;
......@@ -1615,6 +1754,9 @@ static int snd_byt_rt5640_mc_remove(struct platform_device *pdev)
struct snd_soc_card *card = platform_get_drvdata(pdev);
struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2)
acpi_dev_remove_driver_gpios(ACPI_COMPANION(priv->codec_dev));
device_remove_software_node(priv->codec_dev);
put_device(priv->codec_dev);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment