Commit 9ba3b26c authored by Jakub Kicinski's avatar Jakub Kicinski

Merge branch 'add-support-for-j784s4-cpsw9g'

Siddharth Vadapalli says:

====================
Add support for J784S4 CPSW9G

This series adds a new compatible to am65-cpsw driver for the CPSW9G
instance of the CPSW Ethernet Switch on TI's J784S4 SoC which has 8
external ports and 1 internal host port.

The CPSW9G instance supports QSGMII and USXGMII modes for which driver
support is added.

Additionally, the interface mode specific configurations are moved to the
am65_cpsw_nuss_mac_config() callback. Also, a TODO comment is added for
verifying whether in-band mode is necessary for 10 Mbps RGMII mode.

NOTE:
I have verified that the mac_config() operations are preserved across
link up and link down events for SGMII and USXGMII mode with the new
implementation in this series, as suggested by:
Russell King <linux@armlinux.org.uk>

For patches 1 and 3 of this series, I believe that the following tag:
Suggested-by: default avatarRussell King <linux@armlinux.org.uk>

should be added. However, I did not add it since I did not yet get
the permission to do so. I will be happy if the tags are added, since
the new implementation is almost entirely based on Russell's suggestion,
with minor changes made by me.

v2:
https://lore.kernel.org/r/20230403110106.983994-1-s-vadapalli@ti.com/
v1:
https://lore.kernel.org/r/20230331065110.604516-1-s-vadapalli@ti.com/
====================

Link: https://lore.kernel.org/r/20230404061459.1100519-1-s-vadapalli@ti.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parents e2853114 8e672b56
......@@ -1506,9 +1506,21 @@ static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned in
struct am65_cpsw_common *common = port->common;
if (common->pdata.extra_modes & BIT(state->interface)) {
if (state->interface == PHY_INTERFACE_MODE_SGMII)
if (state->interface == PHY_INTERFACE_MODE_SGMII) {
writel(ADVERTISE_SGMII,
port->sgmii_base + AM65_CPSW_SGMII_MR_ADV_ABILITY_REG);
cpsw_sl_ctl_set(port->slave.mac_sl, CPSW_SL_CTL_EXT_EN);
} else {
cpsw_sl_ctl_clr(port->slave.mac_sl, CPSW_SL_CTL_EXT_EN);
}
if (state->interface == PHY_INTERFACE_MODE_USXGMII) {
cpsw_sl_ctl_set(port->slave.mac_sl,
CPSW_SL_CTL_XGIG | CPSW_SL_CTL_XGMII_EN);
} else {
cpsw_sl_ctl_clr(port->slave.mac_sl,
CPSW_SL_CTL_XGIG | CPSW_SL_CTL_XGMII_EN);
}
writel(AM65_CPSW_SGMII_CONTROL_MR_AN_ENABLE,
port->sgmii_base + AM65_CPSW_SGMII_CONTROL_REG);
......@@ -1523,6 +1535,7 @@ static void am65_cpsw_nuss_mac_link_down(struct phylink_config *config, unsigned
struct am65_cpsw_port *port = container_of(slave, struct am65_cpsw_port, slave);
struct am65_cpsw_common *common = port->common;
struct net_device *ndev = port->ndev;
u32 mac_control;
int tmo;
/* disable forwarding */
......@@ -1534,7 +1547,14 @@ static void am65_cpsw_nuss_mac_link_down(struct phylink_config *config, unsigned
dev_dbg(common->dev, "down msc_sl %08x tmo %d\n",
cpsw_sl_reg_read(port->slave.mac_sl, CPSW_SL_MACSTATUS), tmo);
cpsw_sl_ctl_reset(port->slave.mac_sl);
/* All the bits that am65_cpsw_nuss_mac_link_up() can possibly set */
mac_control = CPSW_SL_CTL_GMII_EN | CPSW_SL_CTL_GIG | CPSW_SL_CTL_IFCTL_A |
CPSW_SL_CTL_FULLDUPLEX | CPSW_SL_CTL_RX_FLOW_EN | CPSW_SL_CTL_TX_FLOW_EN;
/* If interface mode is RGMII, CPSW_SL_CTL_EXT_EN might have been set for 10 Mbps */
if (phy_interface_mode_is_rgmii(interface))
mac_control |= CPSW_SL_CTL_EXT_EN;
/* Only clear those bits that can be set by am65_cpsw_nuss_mac_link_up() */
cpsw_sl_ctl_clr(port->slave.mac_sl, mac_control);
am65_cpsw_qos_link_down(ndev);
netif_tx_stop_all_queues(ndev);
......@@ -1551,10 +1571,12 @@ static void am65_cpsw_nuss_mac_link_up(struct phylink_config *config, struct phy
u32 mac_control = CPSW_SL_CTL_GMII_EN;
struct net_device *ndev = port->ndev;
/* Bring the port out of idle state */
cpsw_sl_ctl_clr(port->slave.mac_sl, CPSW_SL_CTL_CMD_IDLE);
if (speed == SPEED_1000)
mac_control |= CPSW_SL_CTL_GIG;
if (interface == PHY_INTERFACE_MODE_SGMII)
mac_control |= CPSW_SL_CTL_EXT_EN;
/* TODO: Verify whether in-band is necessary for 10 Mbps RGMII */
if (speed == SPEED_10 && phy_interface_mode_is_rgmii(interface))
/* Can be used with in band mode only */
mac_control |= CPSW_SL_CTL_EXT_EN;
......@@ -2157,7 +2179,8 @@ am65_cpsw_nuss_init_port_ndev(struct am65_cpsw_common *common, u32 port_idx)
/* Configuring Phylink */
port->slave.phylink_config.dev = &port->ndev->dev;
port->slave.phylink_config.type = PHYLINK_NETDEV;
port->slave.phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD;
port->slave.phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 |
MAC_1000FD | MAC_5000FD;
port->slave.phylink_config.mac_managed_pm = true; /* MAC does PM */
switch (port->slave.phy_if) {
......@@ -2175,6 +2198,7 @@ am65_cpsw_nuss_init_port_ndev(struct am65_cpsw_common *common, u32 port_idx)
case PHY_INTERFACE_MODE_QSGMII:
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_USXGMII:
if (common->pdata.extra_modes & BIT(port->slave.phy_if)) {
__set_bit(port->slave.phy_if,
port->slave.phylink_config.supported_interfaces);
......@@ -2796,12 +2820,20 @@ static const struct am65_cpsw_pdata j721e_cpswxg_pdata = {
.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII),
};
static const struct am65_cpsw_pdata j784s4_cpswxg_pdata = {
.quirks = 0,
.ale_dev_id = "am64-cpswxg",
.fdqring_mode = K3_RINGACC_RING_MODE_MESSAGE,
.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_USXGMII),
};
static const struct of_device_id am65_cpsw_nuss_of_mtable[] = {
{ .compatible = "ti,am654-cpsw-nuss", .data = &am65x_sr1_0},
{ .compatible = "ti,j721e-cpsw-nuss", .data = &j721e_pdata},
{ .compatible = "ti,am642-cpsw-nuss", .data = &am64x_cpswxg_pdata},
{ .compatible = "ti,j7200-cpswxg-nuss", .data = &j7200_cpswxg_pdata},
{ .compatible = "ti,j721e-cpswxg-nuss", .data = &j721e_cpswxg_pdata},
{ .compatible = "ti,j784s4-cpswxg-nuss", .data = &j784s4_cpswxg_pdata},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, am65_cpsw_nuss_of_mtable);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment