Merge tag 'platform-drivers-x86-v5.18-4' of...

Merge tag 'platform-drivers-x86-v5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - thinkpad_acpi AMD suspend/resume + fan detection fixes

 - two other small fixes

 - one hardware-id addition

* tag 'platform-drivers-x86-v5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/surface: aggregator: Fix initialization order when compiling as builtin module
  platform/surface: gpe: Add support for Surface Pro 8
  platform/x86/intel: Fix 'rmmod pmt_telemetry' panic
  platform/x86: thinkpad_acpi: Correct dual fan probe
  platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops
  platform/x86: thinkpad_acpi: Convert btusb DMI list to quirks

drivers/platform/surface/aggregator/core.c

@@ -817,7 +817,7 @@ static int __init ssam_core_init(void)
 err_bus:
 	return status;
 }
-module_init(ssam_core_init);
+subsys_initcall(ssam_core_init);
 
 static void __exit ssam_core_exit(void)
 {

drivers/platform/surface/surface_gpe.c

@@ -99,6 +99,14 @@ static const struct dmi_system_id dmi_lid_device_table[] = {
 		},
 		.driver_data = (void *)lid_device_props_l4D,
 	},
+	{
+		.ident = "Surface Pro 8",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 8"),
+		},
+		.driver_data = (void *)lid_device_props_l4B,
+	},
 	{
 		.ident = "Surface Book 1",
 		.matches = {

drivers/platform/x86/intel/pmt/telemetry.c

@@ -103,7 +103,7 @@ static int pmt_telem_probe(struct auxiliary_device *auxdev, const struct auxilia
 	auxiliary_set_drvdata(auxdev, priv);
 
 	for (i = 0; i < intel_vsec_dev->num_resources; i++) {
-		struct intel_pmt_entry *entry = &priv->entry[i];
+		struct intel_pmt_entry *entry = &priv->entry[priv->num_entries];
 
 		ret = intel_pmt_dev_create(entry, &pmt_telem_ns, intel_vsec_dev, i);
 		if (ret < 0)

drivers/platform/x86/thinkpad_acpi.c

@@ -309,6 +309,20 @@ struct ibm_init_struct {
 	struct ibm_struct *data;
 };
 
+/* DMI Quirks */
+struct quirk_entry {
+	bool btusb_bug;
+	u32 s2idle_bug_mmio;
+};
+
+static struct quirk_entry quirk_btusb_bug = {
+	.btusb_bug = true,
+};
+
+static struct quirk_entry quirk_s2idle_bug = {
+	.s2idle_bug_mmio = 0xfed80380,
+};
+
 static struct {
 	u32 bluetooth:1;
 	u32 hotkey:1;
@@ -338,6 +352,7 @@ static struct {
 	u32 hotkey_poll_active:1;
 	u32 has_adaptive_kbd:1;
 	u32 kbd_lang:1;
+	struct quirk_entry *quirks;
 } tp_features;
 
 static struct {
@@ -4359,9 +4374,10 @@ static void bluetooth_exit(void)
 	bluetooth_shutdown();
 }
 
-static const struct dmi_system_id bt_fwbug_list[] __initconst = {
+static const struct dmi_system_id fwbug_list[] __initconst = {
 	{
 		.ident = "ThinkPad E485",
+		.driver_data = &quirk_btusb_bug,
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_BOARD_NAME, "20KU"),
@@ -4369,6 +4385,7 @@ static const struct dmi_system_id bt_fwbug_list[] __initconst = {
 	},
 	{
 		.ident = "ThinkPad E585",
+		.driver_data = &quirk_btusb_bug,
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_BOARD_NAME, "20KV"),
@@ -4376,6 +4393,7 @@ static const struct dmi_system_id bt_fwbug_list[] __initconst = {
 	},
 	{
 		.ident = "ThinkPad A285 - 20MW",
+		.driver_data = &quirk_btusb_bug,
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_BOARD_NAME, "20MW"),
@@ -4383,6 +4401,7 @@ static const struct dmi_system_id bt_fwbug_list[] __initconst = {
 	},
 	{
 		.ident = "ThinkPad A285 - 20MX",
+		.driver_data = &quirk_btusb_bug,
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_BOARD_NAME, "20MX"),
@@ -4390,6 +4409,7 @@ static const struct dmi_system_id bt_fwbug_list[] __initconst = {
 	},
 	{
 		.ident = "ThinkPad A485 - 20MU",
+		.driver_data = &quirk_btusb_bug,
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_BOARD_NAME, "20MU"),
@@ -4397,14 +4417,125 @@ static const struct dmi_system_id bt_fwbug_list[] __initconst = {
 	},
 	{
 		.ident = "ThinkPad A485 - 20MV",
+		.driver_data = &quirk_btusb_bug,
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_BOARD_NAME, "20MV"),
 		},
 	},
+	{
+		.ident = "L14 Gen2 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20X5"),
+		}
+	},
+	{
+		.ident = "T14s Gen2 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20XF"),
+		}
+	},
+	{
+		.ident = "X13 Gen2 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20XH"),
+		}
+	},
+	{
+		.ident = "T14 Gen2 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20XK"),
+		}
+	},
+	{
+		.ident = "T14 Gen1 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20UD"),
+		}
+	},
+	{
+		.ident = "T14 Gen1 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20UE"),
+		}
+	},
+	{
+		.ident = "T14s Gen1 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20UH"),
+		}
+	},
+	{
+		.ident = "P14s Gen1 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20Y1"),
+		}
+	},
+	{
+		.ident = "P14s Gen2 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "21A0"),
+		}
+	},
 	{}
 };
 
+#ifdef CONFIG_SUSPEND
+/*
+ * Lenovo laptops from a variety of generations run a SMI handler during the D3->D0
+ * transition that occurs specifically when exiting suspend to idle which can cause
+ * large delays during resume when the IOMMU translation layer is enabled (the default
+ * behavior) for NVME devices:
+ *
+ * To avoid this firmware problem, skip the SMI handler on these machines before the
+ * D0 transition occurs.
+ */
+static void thinkpad_acpi_amd_s2idle_restore(void)
+{
+	struct resource *res;
+	void __iomem *addr;
+	u8 val;
+
+	res = request_mem_region_muxed(tp_features.quirks->s2idle_bug_mmio, 1,
+					"thinkpad_acpi_pm80");
+	if (!res)
+		return;
+
+	addr = ioremap(tp_features.quirks->s2idle_bug_mmio, 1);
+	if (!addr)
+		goto cleanup_resource;
+
+	val = ioread8(addr);
+	iowrite8(val & ~BIT(0), addr);
+
+	iounmap(addr);
+cleanup_resource:
+	release_resource(res);
+}
+
+static struct acpi_s2idle_dev_ops thinkpad_acpi_s2idle_dev_ops = {
+	.restore = thinkpad_acpi_amd_s2idle_restore,
+};
+#endif
+
 static const struct pci_device_id fwbug_cards_ids[] __initconst = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24FD) },
@@ -4419,7 +4550,8 @@ static int __init have_bt_fwbug(void)
 	 * Some AMD based ThinkPads have a firmware bug that calling
 	 * "GBDC" will cause bluetooth on Intel wireless cards blocked
 	 */
-	if (dmi_check_system(bt_fwbug_list) && pci_dev_present(fwbug_cards_ids)) {
+	if (tp_features.quirks && tp_features.quirks->btusb_bug &&
+	    pci_dev_present(fwbug_cards_ids)) {
 		vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL,
 			FW_BUG "disable bluetooth subdriver for Intel cards\n");
 		return 1;
@@ -8748,24 +8880,27 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 			fan_status_access_mode = TPACPI_FAN_RD_TPEC;
 			if (quirks & TPACPI_FAN_Q1)
 				fan_quirk1_setup();
-			if (quirks & TPACPI_FAN_2FAN) {
-				tp_features.second_fan = 1;
-				pr_info("secondary fan support enabled\n");
-			}
-			if (quirks & TPACPI_FAN_2CTL) {
-				tp_features.second_fan = 1;
-				tp_features.second_fan_ctl = 1;
-				pr_info("secondary fan control enabled\n");
-			}
 			/* Try and probe the 2nd fan */
+			tp_features.second_fan = 1; /* needed for get_speed to work */
 			res = fan2_get_speed(&speed);
 			if (res >= 0) {
 				/* It responded - so let's assume it's there */
 				tp_features.second_fan = 1;
 				tp_features.second_fan_ctl = 1;
 				pr_info("secondary fan control detected & enabled\n");
+			} else {
+				/* Fan not auto-detected */
+				tp_features.second_fan = 0;
+				if (quirks & TPACPI_FAN_2FAN) {
+					tp_features.second_fan = 1;
+					pr_info("secondary fan support enabled\n");
+				}
+				if (quirks & TPACPI_FAN_2CTL) {
+					tp_features.second_fan = 1;
+					tp_features.second_fan_ctl = 1;
+					pr_info("secondary fan control enabled\n");
+				}
 			}
-
 		} else {
 			pr_err("ThinkPad ACPI EC access misbehaving, fan status and control unavailable\n");
 			return -ENODEV;
@@ -11455,6 +11590,10 @@ static void thinkpad_acpi_module_exit(void)
 
 	tpacpi_lifecycle = TPACPI_LIFE_EXITING;
 
+#ifdef CONFIG_SUSPEND
+	if (tp_features.quirks && tp_features.quirks->s2idle_bug_mmio)
+		acpi_unregister_lps0_dev(&thinkpad_acpi_s2idle_dev_ops);
+#endif
 	if (tpacpi_hwmon)
 		hwmon_device_unregister(tpacpi_hwmon);
 	if (tp_features.sensors_pdrv_registered)
@@ -11496,6 +11635,7 @@ static void thinkpad_acpi_module_exit(void)
 
 static int __init thinkpad_acpi_module_init(void)
 {
+	const struct dmi_system_id *dmi_id;
 	int ret, i;
 
 	tpacpi_lifecycle = TPACPI_LIFE_INIT;
@@ -11535,6 +11675,10 @@ static int __init thinkpad_acpi_module_init(void)
 		return -ENODEV;
 	}
 
+	dmi_id = dmi_first_match(fwbug_list);
+	if (dmi_id)
+		tp_features.quirks = dmi_id->driver_data;
+
 	/* Device initialization */
 	tpacpi_pdev = platform_device_register_simple(TPACPI_DRVR_NAME, -1,
 							NULL, 0);
@@ -11623,6 +11767,13 @@ static int __init thinkpad_acpi_module_init(void)
 		tp_features.input_device_registered = 1;
 	}
 
+#ifdef CONFIG_SUSPEND
+	if (tp_features.quirks && tp_features.quirks->s2idle_bug_mmio) {
+		if (!acpi_register_lps0_dev(&thinkpad_acpi_s2idle_dev_ops))
+			pr_info("Using s2idle quirk to avoid %s platform firmware bug\n",
+				(dmi_id && dmi_id->ident) ? dmi_id->ident : "");
+	}
+#endif
 	return 0;
 }