Merge tag 'driver-core-5.10-rc2' of...

Merge tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and documentation fixes from Greg KH:
 "Here is one tiny debugfs change to fix up an API where the last user
  was successfully fixed up in 5.10-rc1 (so it couldn't be merged
  earlier), and a much larger Documentation/ABI/ update to the files so
  they can be automatically parsed by our tools.

  The Documentation/ABI/ updates are just formatting issues, small ones
  to bring the files into parsable format, and have been acked by
  numerous subsystem maintainers and the documentation maintainer. I
  figured it was good to get this into 5.10-rc2 to help wih the merge
  issues that would arise if these were to stick in linux-next until
  5.11-rc1.

  The debugfs change has been in linux-next for a long time, and the
  Documentation updates only for the last linux-next release"

* tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (40 commits)
  scripts: get_abi.pl: assume ReST format by default
  docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication
  docs: ABI: sysfs-class-backlight: unify ABI documentation
  docs: ABI: sysfs-c2port: remove a duplicated entry
  docs: ABI: sysfs-class-power: unify duplicated properties
  docs: ABI: unify /sys/class/leds/<led>/brightness documentation
  docs: ABI: stable: remove a duplicated documentation
  docs: ABI: change read/write attributes
  docs: ABI: cleanup several ABI documents
  docs: ABI: sysfs-bus-nvdimm: use the right format for ABI
  docs: ABI: vdso: use the right format for ABI
  docs: ABI: fix syntax to be parsed using ReST notation
  docs: ABI: convert testing/configfs-acpi to ReST
  docs: Kconfig/Makefile: add a check for broken ABI files
  docs: abi-testing.rst: enable --rst-sources when building docs
  docs: ABI: don't escape ReST-incompatible chars from obsolete and removed
  docs: ABI: create a 2-depth index for ABI
  docs: ABI: make it parse ABI/stable as ReST-compatible files
  docs: ABI: sysfs-uevent: make it compatible with ReST output
  docs: ABI: testing: make the files compatible with ReST output
  ...

Documentation/ABI/README

@@ -32,7 +32,7 @@ The different levels of stability are:
 	layout of the files below for details on how to do this.)
 
   obsolete/
-  	This directory documents interfaces that are still remaining in
+	This directory documents interfaces that are still remaining in
 	the kernel, but are marked to be removed at some later point in
 	time.  The description of the interface will document the reason
 	why it is obsolete and when it can be expected to be removed.
@@ -58,6 +58,14 @@ Users:		All users of this interface who wish to be notified when
 		be changed further.
 
 
+Note:
+   The fields should be use a simple notation, compatible with ReST markup.
+   Also, the file **should not** have a top-level index, like::
+
+	===
+	foo
+	===
+
 How things move between levels:
 
 Interfaces in stable may move to obsolete, as long as the proper

Documentation/ABI/obsolete/sysfs-class-dax

@@ -8,11 +8,11 @@ Description:	Device DAX is the device-centric analogue of Filesystem
 		system.  Device DAX is strict, precise and predictable.
 		Specifically this interface:
 
-		1/ Guarantees fault granularity with respect to a given
-		page size (pte, pmd, or pud) set at configuration time.
+		1. Guarantees fault granularity with respect to a given
+		   page size (pte, pmd, or pud) set at configuration time.
 
-		2/ Enforces deterministic behavior by being strict about
-		what fault scenarios are supported.
+		2. Enforces deterministic behavior by being strict about
+		   what fault scenarios are supported.
 
 		The /sys/class/dax/ interface enumerates all the
 		device-dax instances in the system. The ABI is

Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra

@@ -7,10 +7,13 @@ Description:	It is possible to switch the cpi setting of the mouse with the
 		setting reported by the mouse. This number has to be further
 		processed to receive the real dpi value:
 
+		===== ====
 		VALUE DPI
+		===== ====
 		1     400
 		2     800
 		4     1600
+		===== ====
 
 		This file is readonly.
 		Has never been used. If bookkeeping is done, it's done in userland tools.

Documentation/ABI/obsolete/sysfs-gpio

@@ -13,6 +13,8 @@ Description:
   GPIOs are identified as they are inside the kernel, using integers in
   the range 0..INT_MAX.  See Documentation/admin-guide/gpio for more information.
 
+  ::
+
     /sys/class/gpio
 	/export ... asks the kernel to export a GPIO to userspace
 	/unexport ... to return a GPIO to the kernel

Documentation/ABI/removed/devfs

@@ -5,6 +5,7 @@ Description:
 	devfs has been unmaintained for a number of years, has unfixable
 	races, contains a naming policy within the kernel that is
 	against the LSB, and can be replaced by using udev.
+
 	The files fs/devfs/*, include/linux/devfs_fs*.h were removed,
 	along with the assorted devfs function calls throughout the
 	kernel tree.

Documentation/ABI/removed/raw1394

@@ -7,6 +7,7 @@ Description:
 	to implement sensible device security policies, and its low level
 	of abstraction that required userspace clients to duplicate much
 	of the kernel's ieee1394 core functionality.
+
 	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
 	firewire-core.
 

Documentation/ABI/removed/sysfs-class-rfkill

@@ -10,4 +10,4 @@ Description:	This file was deprecated because there no longer was a way to
 		claim just control over a single rfkill instance.
 		This file was scheduled to be removed in 2012, and was removed
 		in 2016.
-Values: 	0: Kernel handles events
+Values:		0: Kernel handles events

Documentation/ABI/removed/video1394

@@ -8,6 +8,7 @@ Description:
 	performance issues in its first generation.  Any video1394 user had
 	to use raw1394 + libraw1394 too because video1394 did not provide
 	asynchronous I/O for device discovery and configuration.
+
 	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
 	firewire-core.
 

Documentation/ABI/stable/firewire-cdev

@@ -14,13 +14,17 @@ Description:
 		Each /dev/fw* is associated with one IEEE 1394 node, which can
 		be remote or local nodes.  Operations on a /dev/fw* file have
 		different scope:
+
 		  - The 1394 node which is associated with the file:
+
 			  - Asynchronous request transmission
 			  - Get the Configuration ROM
 			  - Query node ID
 			  - Query maximum speed of the path between this node
 			    and local node
+
 		  - The 1394 bus (i.e. "card") to which the node is attached to:
+
 			  - Isochronous stream transmission and reception
 			  - Asynchronous stream transmission and reception
 			  - Asynchronous broadcast request transmission
@@ -31,7 +35,9 @@ Description:
 			    manager
 			  - Query cycle time
 			  - Bus reset initiation, bus reset event reception
+
 		  - All 1394 buses:
+
 			  - Allocation of IEEE 1212 address ranges on the local
 			    link layers, reception of inbound requests to such
 			    an address range, asynchronous response transmission
@@ -43,6 +49,7 @@ Description:
 		userland implement different access permission models, some
 		operations are restricted to /dev/fw* files that are associated
 		with a local node:
+
 			  - Addition of descriptors or directories to the local
 			    nodes' Configuration ROM
 			  - PHY packet transmission and reception
@@ -55,50 +62,50 @@ Description:
 		The following file operations are supported:
 
 		open(2)
-		Currently the only useful flags are O_RDWR.
+		    Currently the only useful flags are O_RDWR.
 
 		ioctl(2)
-		Initiate various actions.  Some take immediate effect, others
-		are performed asynchronously while or after the ioctl returns.
-		See the inline documentation in <linux/firewire-cdev.h> for
-		descriptions of all ioctls.
+		    Initiate various actions.  Some take immediate effect, others
+		    are performed asynchronously while or after the ioctl returns.
+		    See the inline documentation in <linux/firewire-cdev.h> for
+		    descriptions of all ioctls.
 
 		poll(2), select(2), epoll_wait(2) etc.
-		Watch for events to become available to be read.
+		    Watch for events to become available to be read.
 
 		read(2)
-		Receive various events.  There are solicited events like
-		outbound asynchronous transaction completion or isochronous
-		buffer completion, and unsolicited events such as bus resets,
-		request reception, or PHY packet reception.  Always use a read
-		buffer which is large enough to receive the largest event that
-		could ever arrive.  See <linux/firewire-cdev.h> for descriptions
-		of all event types and for which ioctls affect reception of
-		events.
+		    Receive various events.  There are solicited events like
+		    outbound asynchronous transaction completion or isochronous
+		    buffer completion, and unsolicited events such as bus resets,
+		    request reception, or PHY packet reception.  Always use a read
+		    buffer which is large enough to receive the largest event that
+		    could ever arrive.  See <linux/firewire-cdev.h> for descriptions
+		    of all event types and for which ioctls affect reception of
+		    events.
 
 		mmap(2)
-		Allocate a DMA buffer for isochronous reception or transmission
-		and map it into the process address space.  The arguments should
-		be used as follows:  addr = NULL, length = the desired buffer
-		size, i.e. number of packets times size of largest packet,
-		prot = at least PROT_READ for reception and at least PROT_WRITE
-		for transmission, flags = MAP_SHARED, fd = the handle to the
-		/dev/fw*, offset = 0.
+		    Allocate a DMA buffer for isochronous reception or transmission
+		    and map it into the process address space.  The arguments should
+		    be used as follows:  addr = NULL, length = the desired buffer
+		    size, i.e. number of packets times size of largest packet,
+		    prot = at least PROT_READ for reception and at least PROT_WRITE
+		    for transmission, flags = MAP_SHARED, fd = the handle to the
+		    /dev/fw*, offset = 0.
 
 		Isochronous reception works in packet-per-buffer fashion except
 		for multichannel reception which works in buffer-fill mode.
 
 		munmap(2)
-		Unmap the isochronous I/O buffer from the process address space.
+		    Unmap the isochronous I/O buffer from the process address space.
 
 		close(2)
-		Besides stopping and freeing I/O contexts that were associated
-		with the file descriptor, back out any changes to the local
-		nodes' Configuration ROM.  Deallocate isochronous channels and
-		bandwidth at the IRM that were marked for kernel-assisted
-		re- and deallocation.
-
-Users:		libraw1394
-		libdc1394
-		libhinawa
+		    Besides stopping and freeing I/O contexts that were associated
+		    with the file descriptor, back out any changes to the local
+		    nodes' Configuration ROM.  Deallocate isochronous channels and
+		    bandwidth at the IRM that were marked for kernel-assisted
+		    re- and deallocation.
+
+Users:		libraw1394;
+		libdc1394;
+		libhinawa;
 		tools like linux-firewire-utils, fwhack, ...

Documentation/ABI/stable/sysfs-acpi-pmprofile

-What: 		/sys/firmware/acpi/pm_profile
+What:		/sys/firmware/acpi/pm_profile
 Date:		03-Nov-2011
 KernelVersion:	v3.2
 Contact:	linux-acpi@vger.kernel.org
-Description: 	The ACPI pm_profile sysfs interface exports the platform
+Description:	The ACPI pm_profile sysfs interface exports the platform
 		power management (and performance) requirement expectations
 		as provided by BIOS. The integer value is directly passed as
 		retrieved from the FADT ACPI table.
-Values:         For possible values see ACPI specification:
+
+Values:	        For possible values see ACPI specification:
 		5.2.9 Fixed ACPI Description Table (FADT)
 		Field: Preferred_PM_Profile
 
 		Currently these values are defined by spec:
-		0 Unspecified
-		1 Desktop
-		2 Mobile
-		3 Workstation
-		4 Enterprise Server
-		5 SOHO Server
-		6 Appliance PC
-		7 Performance Server
+
+		== =================
+		0  Unspecified
+		1  Desktop
+		2  Mobile
+		3  Workstation
+		4  Enterprise Server
+		5  SOHO Server
+		6  Appliance PC
+		7  Performance Server
 		>7 Reserved
+		== =================

Documentation/ABI/stable/sysfs-bus-firewire

@@ -47,6 +47,7 @@ Description:
 		IEEE 1394 node device attribute.
 		Read-only and immutable.
 Values:		1: The sysfs entry represents a local node (a controller card).
+
 		0: The sysfs entry represents a remote node.
 
 
@@ -125,7 +126,9 @@ Description:
 		Read-only attribute, immutable during the target's lifetime.
 		Format, as exposed by firewire-sbp2 since 2.6.22, May 2007:
 		Colon-separated hexadecimal string representations of
+
 			u64 EUI-64 : u24 directory_ID : u16 LUN
+
 		without 0x prefixes, without whitespace.  The former sbp2 driver
 		(removed in 2.6.37 after being superseded by firewire-sbp2) used
 		a somewhat shorter format which was not as close to SAM.

Documentation/ABI/stable/sysfs-bus-nvmem

@@ -9,13 +9,14 @@ Description:
 		Note: This file is only present if CONFIG_NVMEM_SYSFS
 		is enabled
 
-		ex:
-		hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+		ex::
 
-		0000000 0000 0000 0000 0000 0000 0000 0000 0000
-		*
-		00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
-		0000000 0000 0000 0000 0000 0000 0000 0000 0000
-		...
-		*
-		0001000
+		  hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+		  0000000 0000 0000 0000 0000 0000 0000 0000 0000
+		  *
+		  00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+		  0000000 0000 0000 0000 0000 0000 0000 0000 0000
+		  ...
+		  *
+		  0001000

Documentation/ABI/stable/sysfs-bus-usb

@@ -50,8 +50,10 @@ Description:
 
 		Tools can use this file and the connected_duration file to
 		compute the percentage of time that a device has been active.
-		For example,
-		echo $((100 * `cat active_duration` / `cat connected_duration`))
+		For example::
+
+		  echo $((100 * `cat active_duration` / `cat connected_duration`))
+
 		will give an integer percentage.  Note that this does not
 		account for counter wrap.
 Users:

Documentation/ABI/stable/sysfs-bus-vmbus

@@ -63,13 +63,6 @@ Contact:	Stephen Hemminger <sthemmin@microsoft.com>
 Description:	VCPU (sub)channel is affinitized to
 Users:		tools/hv/lsvmbus and other debugging tools
 
-What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/cpu
-Date:		September. 2017
-KernelVersion:	4.14
-Contact:	Stephen Hemminger <sthemmin@microsoft.com>
-Description:	VCPU (sub)channel is affinitized to
-Users:		tools/hv/lsvmbus and other debugging tools
-
 What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/in_mask
 Date:		September. 2017
 KernelVersion:	4.14

Documentation/ABI/stable/sysfs-bus-w1

@@ -6,6 +6,7 @@ Description:	Bus scanning interval, microseconds component.
 		control systems are attached/generate presence for as short as
 		100 ms - hence the tens-to-hundreds milliseconds scan intervals
 		are required.
+
 		see Documentation/w1/w1-generic.rst for detailed information.
 Users:		any user space application which wants to know bus scanning
 		interval

Documentation/ABI/stable/sysfs-class-backlight

@@ -4,6 +4,7 @@ KernelVersion:	2.6.12
 Contact:	Richard Purdie <rpurdie@rpsys.net>
 Description:
 		Control BACKLIGHT power, values are FB_BLANK_* from fb.h
+
 		 - FB_BLANK_UNBLANK (0)   : power on.
 		 - FB_BLANK_POWERDOWN (4) : power off
 Users:		HAL

Documentation/ABI/stable/sysfs-class-rfkill

@@ -2,7 +2,7 @@ rfkill - radio frequency (RF) connector kill switch support
 
 For details to this subsystem look at Documentation/driver-api/rfkill.rst.
 
-For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in
+For the deprecated ``/sys/class/rfkill/*/claim`` knobs of this interface look in
 Documentation/ABI/removed/sysfs-class-rfkill.
 
 What: 		/sys/class/rfkill
@@ -36,9 +36,10 @@ KernelVersion	v2.6.22
 Contact:	linux-wireless@vger.kernel.org
 Description: 	Whether the soft blocked state is initialised from non-volatile
 		storage at startup.
-Values: 	A numeric value.
-		0: false
-		1: true
+Values: 	A numeric value:
+
+		- 0: false
+		- 1: true
 
 
 What:		/sys/class/rfkill/rfkill[0-9]+/state
@@ -54,6 +55,7 @@ Description: 	Current state of the transmitter.
 		through this interface. There will likely be another attempt to
 		remove it in the future.
 Values: 	A numeric value.
+
 		0: RFKILL_STATE_SOFT_BLOCKED
 			transmitter is turned off by software
 		1: RFKILL_STATE_UNBLOCKED
@@ -69,6 +71,7 @@ KernelVersion	v2.6.34
 Contact:	linux-wireless@vger.kernel.org
 Description: 	Current hardblock state. This file is read only.
 Values: 	A numeric value.
+
 		0: inactive
 			The transmitter is (potentially) active.
 		1: active
@@ -82,7 +85,9 @@ KernelVersion	v2.6.34
 Contact:	linux-wireless@vger.kernel.org
 Description:	Current softblock state. This file is read and write.
 Values: 	A numeric value.
+
 		0: inactive
 			The transmitter is (potentially) active.
+
 		1: active
 			The transmitter is turned off by software.

Documentation/ABI/stable/sysfs-class-tpm

@@ -32,11 +32,11 @@ KernelVersion:	2.6.12
 Contact:	linux-integrity@vger.kernel.org
 Description:	The "caps" property contains TPM manufacturer and version info.
 
-		Example output:
+		Example output::
 
-		Manufacturer: 0x53544d20
-		TCG version: 1.2
-		Firmware version: 8.16
+		  Manufacturer: 0x53544d20
+		  TCG version: 1.2
+		  Firmware version: 8.16
 
 		Manufacturer is a hex dump of the 4 byte manufacturer info
 		space in a TPM. TCG version shows the TCG TPM spec level that
@@ -54,9 +54,9 @@ Description:	The "durations" property shows the 3 vendor-specific values
 		any longer than necessary before starting to poll for a
 		result.
 
-		Example output:
+		Example output::
 
-		3015000 4508000 180995000 [original]
+		  3015000 4508000 180995000 [original]
 
 		Here the short, medium and long durations are displayed in
 		usecs. "[original]" indicates that the values are displayed
@@ -92,14 +92,14 @@ Description:	The "pcrs" property will dump the current value of all Platform
 		values may be constantly changing, the output is only valid
 		for a snapshot in time.
 
-		Example output:
+		Example output::
 
-		PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
-		PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
-		PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
-		PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
-		PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
-		...
+		  PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  ...
 
 		The number of PCRs and hex bytes needed to represent a PCR
 		value will vary depending on TPM chip version. For TPM 1.1 and
@@ -119,44 +119,44 @@ Description:	The "pubek" property will return the TPM's public endorsement
 		ated at TPM manufacture time and exists for the life of the
 		chip.
 
-		Example output:
-
-		Algorithm: 00 00 00 01
-		Encscheme: 00 03
-		Sigscheme: 00 01
-		Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
-		Modulus length: 256
-		Modulus:
-		B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
-		3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
-		1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
-		86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
-		D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
-		82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
-		0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
-		1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
-		6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
-		A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
-		47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
-		10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
-		E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
-		F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
-		F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
-		C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
-
-		Possible values:
-
-		Algorithm:	TPM_ALG_RSA			(1)
-		Encscheme:	TPM_ES_RSAESPKCSv15		(2)
+		Example output::
+
+		  Algorithm: 00 00 00 01
+		  Encscheme: 00 03
+		  Sigscheme: 00 01
+		  Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
+		  Modulus length: 256
+		  Modulus:
+		  B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
+		  3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
+		  1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
+		  86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
+		  D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
+		  82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
+		  0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
+		  1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
+		  6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
+		  A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
+		  47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
+		  10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
+		  E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
+		  F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
+		  F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
+		  C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
+
+		Possible values::
+
+		  Algorithm:	TPM_ALG_RSA			(1)
+		  Encscheme:	TPM_ES_RSAESPKCSv15		(2)
 				TPM_ES_RSAESOAEP_SHA1_MGF1	(3)
-		Sigscheme:	TPM_SS_NONE			(1)
-		Parameters, a byte string of 3 u32 values:
+		  Sigscheme:	TPM_SS_NONE			(1)
+		  Parameters, a byte string of 3 u32 values:
 			Key Length (bits):	00 00 08 00	(2048)
 			Num primes:		00 00 00 02	(2)
 			Exponent Size:		00 00 00 00	(0 means the
 								 default exp)
-		Modulus Length: 256 (bytes)
-		Modulus:	The 256 byte Endorsement Key modulus
+		  Modulus Length: 256 (bytes)
+		  Modulus:	The 256 byte Endorsement Key modulus
 
 What:		/sys/class/tpm/tpmX/device/temp_deactivated
 Date:		April 2006
@@ -176,9 +176,9 @@ Description:	The "timeouts" property shows the 4 vendor-specific values
 		timeouts is defined by the TPM interface spec that the chip
 		conforms to.
 
-		Example output:
+		Example output::
 
-		750000 750000 750000 750000 [original]
+		  750000 750000 750000 750000 [original]
 
 		The four timeout values are shown in usecs, with a trailing
 		"[original]" or "[adjusted]" depending on whether the values
@@ -191,6 +191,6 @@ Contact:	linux-integrity@vger.kernel.org
 Description:	The "tpm_version_major" property shows the TCG spec major version
 		implemented by the TPM device.
 
-		Example output:
+		Example output::
 
-		2
+		  2

Documentation/ABI/stable/sysfs-devices

-# Note: This documents additional properties of any device beyond what
-# is documented in Documentation/admin-guide/sysfs-rules.rst
+Note:
+  This documents additional properties of any device beyond what
+  is documented in Documentation/admin-guide/sysfs-rules.rst
 
 What:		/sys/devices/*/of_node
 Date:		February 2015

Documentation/ABI/stable/sysfs-driver-firmware-zynqmp

@@ -12,13 +12,15 @@ Description:
 		resets. Three registers are used by the FSBL and
 		other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}.
 
-		Usage:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
-		# echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		Usage::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+		Example::
 
-		Example:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
-		# echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
 
 Users:		Xilinx
 
@@ -39,13 +41,15 @@ Description:
 		software products: PERS_GLOB_GEN_STORAGE{4:7}.
 		Register is reset only by a POR reset.
 
-		Usage:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
-		# echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		Usage::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+		Example::
 
-		Example:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
-		# echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
 
 Users:		Xilinx
 
@@ -61,23 +65,28 @@ Description:
 
 		Following are available shutdown scopes(subtypes):
 
-		subsystem:	Only the APU along with all of its peripherals
+		subsystem:
+				Only the APU along with all of its peripherals
 				not used by other processing units will be
 				shut down. This may result in the FPD power
 				domain being shut down provided that no other
 				processing unit uses FPD peripherals or DRAM.
-		ps_only:	The complete PS will be shut down, including the
+		ps_only:
+				The complete PS will be shut down, including the
 				RPU, PMU, etc.  Only the PL domain (FPGA)
 				remains untouched.
-		system:		The complete system/device is shut down.
+		system:
+				The complete system/device is shut down.
 
-		Usage:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
-		# echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		Usage::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+		Example::
 
-		Example:
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
-		# echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
 
 Users:		Xilinx
 
@@ -94,10 +103,13 @@ Description:
 		system restart.
 
 		Usage:
-		Set healthy bit
-		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
 
-		Unset healthy bit
-		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+		Set healthy bit::
+
+		    # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+		Unset healthy bit::
+
+		    # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
 
 Users:		Xilinx

Documentation/ABI/stable/sysfs-driver-ib_srp

@@ -6,6 +6,7 @@ Description:	Interface for making ib_srp connect to a new target.
 		One can request ib_srp to connect to a new target by writing
 		a comma-separated list of login parameters to this sysfs
 		attribute. The supported parameters are:
+
 		* id_ext, a 16-digit hexadecimal number specifying the eight
 		  byte identifier extension in the 16-byte SRP target port
 		  identifier. The target port identifier is sent by ib_srp

Documentation/ABI/stable/sysfs-driver-speakup

@@ -69,6 +69,7 @@ Description:	Controls if typing interrupts output from speakup. With
 		speakup if for example
 		the say screen command is used before the
 		entire screen  is read.
+
 		With no_interrupt set to one, if the say
 		screen command is used, and one then types on the keyboard,
 		speakup will continue to say the whole screen regardless until
@@ -215,8 +216,10 @@ Description:	This file contains names for key states.
 		Again, these are part of the help system.  For instance, if you
 		had pressed speakup + keypad 3, you would hear:
 		"speakup keypad 3 is go to bottom edge."
+
 		The speakup key is depressed, so the name of the key state is
 		speakup.
+
 		This part of the message comes from the states collection.
 
 What:		/sys/accessibility/speakup/i18n/characters
@@ -297,6 +300,7 @@ KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	Controls if punctuation is spoken by speakup, or by the
 		synthesizer.
+
 		For example, speakup speaks ">" as "greater", while
 		the espeak synthesizer used by the soft driver speaks "greater
 		than". Zero lets speakup speak the punctuation. One lets the

Documentation/ABI/stable/sysfs-firmware-efi-vars

@@ -17,6 +17,7 @@ Description:
 		directory has a name of the form "<key>-<vendor guid>"
 		and contains the following files:
 
+		=============== ========================================
 		attributes:	A read-only text file enumerating the
 				EFI variable flags.  Potential values
 				include:
@@ -59,12 +60,14 @@ Description:
 
 		size:		As ASCII representation of the size of
 				the variable's value.
+		=============== ========================================
 
 
 		In addition, two other magic binary files are provided
 		in the top-level directory and are used for adding and
 		removing variables:
 
+		=============== ========================================
 		new_var:	Takes a "struct efi_variable" and
 				instructs the EFI firmware to create a
 				new variable.
@@ -73,3 +76,4 @@ Description:
 				instructs the EFI firmware to remove any
 				variable that has a matching vendor GUID
 				and variable key name.
+		=============== ========================================

Documentation/ABI/stable/sysfs-firmware-opal-dump

@@ -7,6 +7,7 @@ Description:
 
 		This is only for the powerpc/powernv platform.
 
+		=============== ===============================================
 		initiate_dump:	When '1' is written to it,
 				we will initiate a dump.
 				Read this file for supported commands.
@@ -19,8 +20,11 @@ Description:
 				and ID of the dump, use the id and type files.
 				Do not rely on any particular size of dump
 				type or dump id.
+		=============== ===============================================
 
 		Each dump has the following files:
+
+		=============== ===============================================
 		id:		An ASCII representation of the dump ID
 				in hex (e.g. '0x01')
 		type:		An ASCII representation of the type of
@@ -39,3 +43,4 @@ Description:
 				inaccessible.
 				Reading this file will get a list of
 				supported actions.
+		=============== ===============================================

Documentation/ABI/stable/sysfs-firmware-opal-elog

@@ -38,6 +38,7 @@ Description:
 		For each log entry (directory), there are the following
 		files:
 
+		==============  ================================================
 		id:		An ASCII representation of the ID of the
 				error log, in hex - e.g. "0x01".
 
@@ -58,3 +59,4 @@ Description:
 				entry will be removed from sysfs.
 				Reading this file will list the supported
 				operations (currently just acknowledge).
+		==============  ================================================

Documentation/ABI/stable/sysfs-hypervisor-xen

@@ -33,6 +33,8 @@ Description:	If running under Xen:
 		Space separated list of supported guest system types. Each type
 		is in the format: <class>-<major>.<minor>-<arch>
 		With:
+
+			======== ============================================
 			<class>: "xen" -- x86: paravirtualized, arm: standard
 				 "hvm" -- x86 only: fully virtualized
 			<major>: major guest interface version
@@ -43,6 +45,7 @@ Description:	If running under Xen:
 				 "x86_64": 64 bit x86 guest
 				 "armv7l": 32 bit arm guest
 				 "aarch64": 64 bit arm guest
+			======== ============================================
 
 What:		/sys/hypervisor/properties/changeset
 Date:		March 2009

Documentation/ABI/stable/vdso

+What:		vDSO
+Date:		July 2011
+KernelVersion:	3.0
+Contact:	Andy Lutomirski <luto@kernel.org>
+Description:
+
 On some architectures, when the kernel loads any userspace program it
 maps an ELF DSO into that program's address space.  This DSO is called
 the vDSO and it often contains useful and highly-optimized alternatives
@@ -23,6 +29,7 @@ Unless otherwise noted, the set of symbols with any given version and the
 ABI of those symbols is considered stable.  It may vary across architectures,
 though.
 
-(As of this writing, this ABI documentation as been confirmed for x86_64.
+Note:
+ As of this writing, this ABI documentation as been confirmed for x86_64.
  The maintainers of the other vDSO-using architectures should confirm
- that it is correct for their architecture.)
+ that it is correct for their architecture.

Documentation/ABI/testing/configfs-acpi

@@ -14,7 +14,8 @@ Description:
 		This group contains the configuration for user defined ACPI
 		tables. The attributes of a user define table are:
 
-		aml 		- a binary attribute that the user can use to
+		aml
+			      - a binary attribute that the user can use to
 				fill in the ACPI aml definitions. Once the aml
 				data is written to this file and the file is
 				closed the table will be loaded and ACPI devices
@@ -26,11 +27,26 @@ Description:
 		The rest of the attributes are read-only and are valid only
 		after the table has been loaded by filling the aml entry:
 
-		signature 	- ASCII table signature
-		length 		- length of table in bytes, including the header
-		revision 	- ACPI Specification minor version number
-		oem_id 		- ASCII OEM identification
-		oem_table_id 	- ASCII OEM table identification
-		oem_revision 	- OEM revision number
-		asl_compiler_id - ASCII ASL compiler vendor ID
-		asl_compiler_revision - ASL compiler version
+		signature
+				- ASCII table signature
+
+		length
+				- length of table in bytes, including the header
+
+		revision
+				- ACPI Specification minor version number
+
+		oem_id
+				- ASCII OEM identification
+
+		oem_table_id
+				- ASCII OEM table identification
+
+		oem_revision
+				- OEM revision number
+
+		asl_compiler_id
+				- ASCII ASL compiler vendor ID
+
+		asl_compiler_revision
+				- ASL compiler version

Documentation/ABI/testing/configfs-most

@@ -15,22 +15,28 @@ KernelVersion:  5.2
 Description:
 		The attributes:
 
-		buffer_size	configure the buffer size for this channel
+		buffer_size
+				configure the buffer size for this channel
 
-		subbuffer_size	configure the sub-buffer size for this channel
+		subbuffer_size
+				configure the sub-buffer size for this channel
 				(needed for synchronous and isochrnous data)
 
 
-		num_buffers	configure number of buffers used for this
+		num_buffers
+				configure number of buffers used for this
 				channel
 
-		datatype	configure type of data that will travel over
+		datatype
+				configure type of data that will travel over
 				this channel
 
-		direction	configure whether this link will be an input
+		direction
+				configure whether this link will be an input
 				or output
 
-		dbr_size	configure DBR data buffer size (this is used
+		dbr_size
+				configure DBR data buffer size (this is used
 				for MediaLB communication only)
 
 		packets_per_xact
@@ -39,18 +45,23 @@ Description:
 				transmitted via USB (this is used for USB
 				communication only)
 
-		device		name of the device the link is to be attached to
+		device
+				name of the device the link is to be attached to
 
-		channel		name of the channel the link is to be attached to
+		channel
+				name of the channel the link is to be attached to
 
-		comp_params	pass parameters needed by some components
+		comp_params
+				pass parameters needed by some components
 
-		create_link	write '1' to this attribute to trigger the
+		create_link
+				write '1' to this attribute to trigger the
 				creation of the link. In case of speculative
 				configuration, the creation is post-poned until
 				a physical device is being attached to the bus.
 
-		destroy_link	write '1' to this attribute to destroy an
+		destroy_link
+				write '1' to this attribute to destroy an
 				active link
 
 What: 		/sys/kernel/config/most_video/<link>
@@ -59,22 +70,28 @@ KernelVersion:  5.2
 Description:
 		The attributes:
 
-		buffer_size	configure the buffer size for this channel
+		buffer_size
+				configure the buffer size for this channel
 
-		subbuffer_size	configure the sub-buffer size for this channel
+		subbuffer_size
+				configure the sub-buffer size for this channel
 				(needed for synchronous and isochrnous data)
 
 
-		num_buffers	configure number of buffers used for this
+		num_buffers
+				configure number of buffers used for this
 				channel
 
-		datatype	configure type of data that will travel over
+		datatype
+				configure type of data that will travel over
 				this channel
 
-		direction	configure whether this link will be an input
+		direction
+				configure whether this link will be an input
 				or output
 
-		dbr_size	configure DBR data buffer size (this is used
+		dbr_size
+				configure DBR data buffer size (this is used
 				for MediaLB communication only)
 
 		packets_per_xact
@@ -83,18 +100,23 @@ Description:
 				transmitted via USB (this is used for USB
 				communication only)
 
-		device		name of the device the link is to be attached to
+		device
+				name of the device the link is to be attached to
 
-		channel		name of the channel the link is to be attached to
+		channel
+				name of the channel the link is to be attached to
 
-		comp_params	pass parameters needed by some components
+		comp_params
+				pass parameters needed by some components
 
-		create_link	write '1' to this attribute to trigger the
+		create_link
+				write '1' to this attribute to trigger the
 				creation of the link. In case of speculative
 				configuration, the creation is post-poned until
 				a physical device is being attached to the bus.
 
-		destroy_link	write '1' to this attribute to destroy an
+		destroy_link
+				write '1' to this attribute to destroy an
 				active link
 
 What: 		/sys/kernel/config/most_net/<link>
@@ -103,22 +125,28 @@ KernelVersion:  5.2
 Description:
 		The attributes:
 
-		buffer_size	configure the buffer size for this channel
+		buffer_size
+				configure the buffer size for this channel
 
-		subbuffer_size	configure the sub-buffer size for this channel
+		subbuffer_size
+				configure the sub-buffer size for this channel
 				(needed for synchronous and isochrnous data)
 
 
-		num_buffers	configure number of buffers used for this
+		num_buffers
+				configure number of buffers used for this
 				channel
 
-		datatype	configure type of data that will travel over
+		datatype
+				configure type of data that will travel over
 				this channel
 
-		direction	configure whether this link will be an input
+		direction
+				configure whether this link will be an input
 				or output
 
-		dbr_size	configure DBR data buffer size (this is used
+		dbr_size
+				configure DBR data buffer size (this is used
 				for MediaLB communication only)
 
 		packets_per_xact
@@ -127,18 +155,23 @@ Description:
 				transmitted via USB (this is used for USB
 				communication only)
 
-		device		name of the device the link is to be attached to
+		device
+				name of the device the link is to be attached to
 
-		channel		name of the channel the link is to be attached to
+		channel
+				name of the channel the link is to be attached to
 
-		comp_params	pass parameters needed by some components
+		comp_params
+				pass parameters needed by some components
 
-		create_link	write '1' to this attribute to trigger the
+		create_link
+				write '1' to this attribute to trigger the
 				creation of the link. In case of speculative
 				configuration, the creation is post-poned until
 				a physical device is being attached to the bus.
 
-		destroy_link	write '1' to this attribute to destroy an
+		destroy_link
+				write '1' to this attribute to destroy an
 				active link
 
 What: 		/sys/kernel/config/most_sound/<card>
@@ -147,7 +180,8 @@ KernelVersion:  5.2
 Description:
 		The attributes:
 
-		create_card	write '1' to this attribute to trigger the
+		create_card
+				write '1' to this attribute to trigger the
                                 registration of the sound card with the ALSA
 				subsystem.
 
@@ -157,22 +191,28 @@ KernelVersion:  5.2
 Description:
 		The attributes:
 
-		buffer_size	configure the buffer size for this channel
+		buffer_size
+				configure the buffer size for this channel
 
-		subbuffer_size	configure the sub-buffer size for this channel
+		subbuffer_size
+				configure the sub-buffer size for this channel
 				(needed for synchronous and isochrnous data)
 
 
-		num_buffers	configure number of buffers used for this
+		num_buffers
+				configure number of buffers used for this
 				channel
 
-		datatype	configure type of data that will travel over
+		datatype
+				configure type of data that will travel over
 				this channel
 
-		direction	configure whether this link will be an input
+		direction
+				configure whether this link will be an input
 				or output
 
-		dbr_size	configure DBR data buffer size (this is used
+		dbr_size
+				configure DBR data buffer size (this is used
 				for MediaLB communication only)
 
 		packets_per_xact
@@ -181,16 +221,21 @@ Description:
 				transmitted via USB (this is used for USB
 				communication only)
 
-		device		name of the device the link is to be attached to
+		device
+				name of the device the link is to be attached to
 
-		channel		name of the channel the link is to be attached to
+		channel
+				name of the channel the link is to be attached to
 
-		comp_params	pass parameters needed by some components
+		comp_params
+				pass parameters needed by some components
 
-		create_link	write '1' to this attribute to trigger the
+		create_link
+				write '1' to this attribute to trigger the
 				creation of the link. In case of speculative
 				configuration, the creation is post-poned until
 				a physical device is being attached to the bus.
 
-		destroy_link	write '1' to this attribute to destroy an
+		destroy_link
+				write '1' to this attribute to destroy an
 				active link

Documentation/ABI/testing/configfs-spear-pcie-gadget

@@ -10,22 +10,24 @@ Description:
 	This interfaces can be used to show spear's PCIe device capability.
 
 	Nodes are only visible when configfs is mounted. To mount configfs
-	in /config directory use:
-	# mount -t configfs none /config/
+	in /config directory use::
 
-	For nth PCIe Device Controller
-	/config/pcie-gadget.n/
-		link ... used to enable ltssm and read its status.
-		int_type ...used to configure and read type of supported
-			interrupt
-		no_of_msi ... used to configure number of MSI vector needed and
+	  # mount -t configfs none /config/
+
+	For nth PCIe Device Controller /config/pcie-gadget.n/:
+
+	=============== ======================================================
+	link		used to enable ltssm and read its status.
+	int_type	used to configure and read type of supported interrupt
+	no_of_msi	used to configure number of MSI vector needed and
 			to read no of MSI granted.
-		inta ... write 1 to assert INTA and 0 to de-assert.
-		send_msi ... write MSI vector to be sent.
-		vendor_id ... used to write and read vendor id (hex)
-		device_id ... used to write and read device id (hex)
-		bar0_size ... used to write and read bar0_size
-		bar0_address ... used to write and read bar0 mapped area in hex.
-		bar0_rw_offset ... used to write and read offset of bar0 where
-			bar0_data will be written or read.
-		bar0_data ... used to write and read data at bar0_rw_offset.
+	inta		write 1 to assert INTA and 0 to de-assert.
+	send_msi	write MSI vector to be sent.
+	vendor_id	used to write and read vendor id (hex)
+	device_id	used to write and read device id (hex)
+	bar0_size	used to write and read bar0_size
+	bar0_address	used to write and read bar0 mapped area in hex.
+	bar0_rw_offset	used to write and read offset of bar0 where bar0_data
+			will be written or read.
+	bar0_data	used to write and read data at bar0_rw_offset.
+	=============== ======================================================

Documentation/ABI/testing/configfs-usb-gadget

@@ -12,22 +12,24 @@ Description:
 
 		The attributes of a gadget:
 
-		UDC		- bind a gadget to UDC/unbind a gadget;
-				write UDC's name found in /sys/class/udc/*
-				to bind a gadget, empty string "" to unbind.
-
-		max_speed	- maximum speed the driver supports. Valid
-				names are super-speed-plus, super-speed,
-				high-speed, full-speed, and low-speed.
-
-		bDeviceClass	- USB device class code
-		bDeviceSubClass	- USB device subclass code
-		bDeviceProtocol	- USB device protocol code
-		bMaxPacketSize0	- maximum endpoint 0 packet size
-		bcdDevice	- bcd device release number
-		bcdUSB		- bcd USB specification version number
-		idProduct	- product ID
-		idVendor	- vendor ID
+		================  ============================================
+		UDC		  bind a gadget to UDC/unbind a gadget;
+				  write UDC's name found in /sys/class/udc/*
+				  to bind a gadget, empty string "" to unbind.
+
+		max_speed	  maximum speed the driver supports. Valid
+				  names are super-speed-plus, super-speed,
+				  high-speed, full-speed, and low-speed.
+
+		bDeviceClass	  USB device class code
+		bDeviceSubClass	  USB device subclass code
+		bDeviceProtocol	  USB device protocol code
+		bMaxPacketSize0	  maximum endpoint 0 packet size
+		bcdDevice	  bcd device release number
+		bcdUSB		  bcd USB specification version number
+		idProduct	  product ID
+		idVendor	  vendor ID
+		================  ============================================
 
 What:		/config/usb-gadget/gadget/configs
 Date:		Jun 2013
@@ -41,8 +43,10 @@ KernelVersion:	3.11
 Description:
 		The attributes of a configuration:
 
-		bmAttributes	- configuration characteristics
-		MaxPower	- maximum power consumption from the bus
+		================  ======================================
+		bmAttributes	  configuration characteristics
+		MaxPower	  maximum power consumption from the bus
+		================  ======================================
 
 What:		/config/usb-gadget/gadget/configs/config/strings
 Date:		Jun 2013
@@ -57,7 +61,9 @@ KernelVersion:	3.11
 Description:
 		The attributes:
 
-		configuration	- configuration description
+		================  =========================
+		configuration	  configuration description
+		================  =========================
 
 
 What:		/config/usb-gadget/gadget/functions
@@ -76,8 +82,10 @@ Description:
 
 		The attributes:
 
-		compatible_id		- 8-byte string for "Compatible ID"
-		sub_compatible_id	- 8-byte string for "Sub Compatible ID"
+		=================	=====================================
+		compatible_id		8-byte string for "Compatible ID"
+		sub_compatible_id	8-byte string for "Sub Compatible ID"
+		=================	=====================================
 
 What:		/config/usb-gadget/gadget/functions/<func>.<inst>/interface.<n>/<property>
 Date:		May 2014
@@ -89,16 +97,19 @@ Description:
 
 		The attributes:
 
-		type		- value 1..7 for interpreting the data
-				1: unicode string
-				2: unicode string with environment variable
-				3: binary
-				4: little-endian 32-bit
-				5: big-endian 32-bit
-				6: unicode string with a symbolic link
-				7: multiple unicode strings
-		data		- blob of data to be interpreted depending on
+		=====		===============================================
+		type		value 1..7 for interpreting the data
+
+				- 1: unicode string
+				- 2: unicode string with environment variable
+				- 3: binary
+				- 4: little-endian 32-bit
+				- 5: big-endian 32-bit
+				- 6: unicode string with a symbolic link
+				- 7: multiple unicode strings
+		data		blob of data to be interpreted depending on
 				type
+		=====		===============================================
 
 What:		/config/usb-gadget/gadget/strings
 Date:		Jun 2013
@@ -113,9 +124,11 @@ KernelVersion:	3.11
 Description:
 		The attributes:
 
-		serialnumber	- gadget's serial number (string)
-		product		- gadget's product description
-		manufacturer	- gadget's manufacturer description
+		============	=================================
+		serialnumber	gadget's serial number (string)
+		product		gadget's product description
+		manufacturer	gadget's manufacturer description
+		============	=================================
 
 What:		/config/usb-gadget/gadget/os_desc
 Date:		May 2014
@@ -123,8 +136,10 @@ KernelVersion:	3.16
 Description:
 		This group contains "OS String" extension handling attributes.
 
-		use		- flag turning "OS Desctiptors" support on/off
-		b_vendor_code	- one-byte value used for custom per-device and
+		=============	===============================================
+		use		flag turning "OS Desctiptors" support on/off
+		b_vendor_code	one-byte value used for custom per-device and
 				per-interface requests
-		qw_sign		- an identifier to be reported as "OS String"
+		qw_sign		an identifier to be reported as "OS String"
 				proper
+		=============	===============================================

Documentation/ABI/testing/configfs-usb-gadget-ecm

@@ -4,13 +4,17 @@ KernelVersion:	3.11
 Description:
 		The attributes:
 
-		ifname		- network device interface name associated with
+		ifname
+			      - network device interface name associated with
 				this function instance
-		qmult		- queue length multiplier for high and
+		qmult	
+			      - queue length multiplier for high and
 				super speed
-		host_addr	- MAC address of host's end of this
+		host_addr
+			      - MAC address of host's end of this
 				Ethernet over USB link
-		dev_addr	- MAC address of device's end of this
+		dev_addr
+			      - MAC address of device's end of this
 				Ethernet over USB link
 
 

Documentation/ABI/testing/configfs-usb-gadget-eem

@@ -4,11 +4,13 @@ KernelVersion:	3.11
 Description:
 		The attributes:
 
-		ifname		- network device interface name associated with
+		==========	=============================================
+		ifname		network device interface name associated with
 				this function instance
-		qmult		- queue length multiplier for high and
+		qmult		queue length multiplier for high and
 				super speed
-		host_addr	- MAC address of host's end of this
+		host_addr	MAC address of host's end of this
 				Ethernet over USB link
-		dev_addr	- MAC address of device's end of this
+		dev_addr	MAC address of device's end of this
 				Ethernet over USB link
+		==========	=============================================

Documentation/ABI/testing/configfs-usb-gadget-hid

@@ -4,8 +4,10 @@ KernelVersion:	3.19
 Description:
 		The attributes:
 
-		protocol	- HID protocol to use
-		report_desc	- blob corresponding to HID report descriptors
+		=============	============================================
+		protocol	HID protocol to use
+		report_desc	blob corresponding to HID report descriptors
 				except the data passed through /dev/hidg<N>
-		report_length	- HID report length
-		subclass	- HID device subclass to use
+		report_length	HID report length
+		subclass	HID device subclass to use
+		=============	============================================

Documentation/ABI/testing/configfs-usb-gadget-loopback

@@ -4,5 +4,7 @@ KernelVersion:	3.13
 Description:
 		The attributes:
 
-		qlen		- depth of loopback queue
-		buflen		- buffer length
+		=======		=======================
+		qlen		depth of loopback queue
+		buflen		buffer length
+		=======		=======================

Documentation/ABI/testing/configfs-usb-gadget-mass-storage

@@ -4,12 +4,14 @@ KernelVersion:	3.13
 Description:
 		The attributes:
 
-		stall		- Set to permit function to halt bulk endpoints.
+		===========	==============================================
+		stall		Set to permit function to halt bulk endpoints.
 				Disabled on some USB devices known not to work
 				correctly. You should set it to true.
-		num_buffers	- Number of pipeline buffers. Valid numbers
+		num_buffers	Number of pipeline buffers. Valid numbers
 				are 2..4. Available only if
 				CONFIG_USB_GADGET_DEBUG_FILES is set.
+		===========	==============================================
 
 What:		/config/usb-gadget/gadget/functions/mass_storage.name/lun.name
 Date:		Oct 2013
@@ -17,15 +19,17 @@ KernelVersion:	3.13
 Description:
 		The attributes:
 
-		file		- The path to the backing file for the LUN.
+		===========	==============================================
+		file		The path to the backing file for the LUN.
 				Required if LUN is not marked as removable.
-		ro		- Flag specifying access to the LUN shall be
+		ro		Flag specifying access to the LUN shall be
 				read-only. This is implied if CD-ROM emulation
 				is enabled as well as when it was impossible
 				to open "filename" in R/W mode.
-		removable	- Flag specifying that LUN shall be indicated as
+		removable	Flag specifying that LUN shall be indicated as
 				being removable.
-		cdrom		- Flag specifying that LUN shall be reported as
+		cdrom		Flag specifying that LUN shall be reported as
 				being a CD-ROM.
-		nofua		- Flag specifying that FUA flag
+		nofua		Flag specifying that FUA flag
 				in SCSI WRITE(10,12)
+		===========	==============================================

Documentation/ABI/testing/configfs-usb-gadget-midi

@@ -4,9 +4,11 @@ KernelVersion:	3.19
 Description:
 		The attributes:
 
-		index		- index value for the USB MIDI adapter
-		id		- ID string for the USB MIDI adapter
-		buflen		- MIDI buffer length
-		qlen		- USB read request queue length
-		in_ports	- number of MIDI input ports
-		out_ports	- number of MIDI output ports
+		==========	====================================
+		index		index value for the USB MIDI adapter
+		id		ID string for the USB MIDI adapter
+		buflen		MIDI buffer length
+		qlen		USB read request queue length
+		in_ports	number of MIDI input ports
+		out_ports	number of MIDI output ports
+		==========	====================================

Documentation/ABI/testing/configfs-usb-gadget-printer

@@ -4,6 +4,8 @@ KernelVersion:	4.1
 Description:
 		The attributes:
 
-		pnp_string	- Data to be passed to the host in pnp string
-		q_len		- Number of requests per endpoint
+		==========      ===========================================
+		pnp_string	Data to be passed to the host in pnp string
+		q_len		Number of requests per endpoint
+		==========      ===========================================
 

Documentation/ABI/testing/configfs-usb-gadget-rndis

@@ -4,14 +4,16 @@ KernelVersion:	3.11
 Description:
 		The attributes:
 
-		ifname		- network device interface name associated with
+		=========	=============================================
+		ifname		network device interface name associated with
 				this function instance
-		qmult		- queue length multiplier for high and
+		qmult		queue length multiplier for high and
 				super speed
-		host_addr	- MAC address of host's end of this
+		host_addr	MAC address of host's end of this
 				Ethernet over USB link
-		dev_addr	- MAC address of device's end of this
+		dev_addr	MAC address of device's end of this
 				Ethernet over USB link
-		class		- USB interface class, default is 02 (hex)
-		subclass	- USB interface subclass, default is 06 (hex)
-		protocol	- USB interface protocol, default is 00 (hex)
+		class		USB interface class, default is 02 (hex)
+		subclass	USB interface subclass, default is 06 (hex)
+		protocol	USB interface protocol, default is 00 (hex)
+		=========	=============================================

Documentation/ABI/testing/configfs-usb-gadget-sourcesink

@@ -4,11 +4,13 @@ KernelVersion:	3.13
 Description:
 		The attributes:
 
-		pattern		- 0 (all zeros), 1 (mod63), 2 (none)
-		isoc_interval	- 1..16
-		isoc_maxpacket	- 0 - 1023 (fs), 0 - 1024 (hs/ss)
-		isoc_mult	- 0..2 (hs/ss only)
-		isoc_maxburst	- 0..15 (ss only)
-		buflen		- buffer length
-		bulk_qlen	- depth of queue for bulk
-		iso_qlen	- depth of queue for iso
+		==============    ==================================
+		pattern		  0 (all zeros), 1 (mod63), 2 (none)
+		isoc_interval	  1..16
+		isoc_maxpacket	  0 - 1023 (fs), 0 - 1024 (hs/ss)
+		isoc_mult	  0..2 (hs/ss only)
+		isoc_maxburst	  0..15 (ss only)
+		buflen		  buffer length
+		bulk_qlen	  depth of queue for bulk
+		iso_qlen	  depth of queue for iso
+		==============    ==================================

Documentation/ABI/testing/configfs-usb-gadget-subset

@@ -4,11 +4,13 @@ KernelVersion:	3.11
 Description:
 		The attributes:
 
-		ifname		- network device interface name associated with
+		==========	=============================================
+		ifname		network device interface name associated with
 				this function instance
-		qmult		- queue length multiplier for high and
+		qmult		queue length multiplier for high and
 				super speed
-		host_addr	- MAC address of host's end of this
+		host_addr	MAC address of host's end of this
 				Ethernet over USB link
-		dev_addr	- MAC address of device's end of this
+		dev_addr	MAC address of device's end of this
 				Ethernet over USB link
+		==========	=============================================

Documentation/ABI/testing/configfs-usb-gadget-uac1

@@ -4,11 +4,13 @@ KernelVersion:	4.14
 Description:
 		The attributes:
 
-		c_chmask - capture channel mask
-		c_srate - capture sampling rate
-		c_ssize - capture sample size (bytes)
-		p_chmask - playback channel mask
-		p_srate - playback sampling rate
-		p_ssize - playback sample size (bytes)
-		req_number - the number of pre-allocated request
-			for both capture and playback
+		==========	===================================
+		c_chmask	capture channel mask
+		c_srate		capture sampling rate
+		c_ssize		capture sample size (bytes)
+		p_chmask	playback channel mask
+		p_srate		playback sampling rate
+		p_ssize		playback sample size (bytes)
+		req_number	the number of pre-allocated request
+				for both capture and playback
+		==========	===================================

Documentation/ABI/testing/configfs-usb-gadget-uac2

@@ -4,9 +4,11 @@ KernelVersion:	3.18
 Description:
 		The attributes:
 
-		c_chmask - capture channel mask
-		c_srate - capture sampling rate
-		c_ssize - capture sample size (bytes)
-		p_chmask - playback channel mask
-		p_srate - playback sampling rate
-		p_ssize - playback sample size (bytes)
+		=========  ============================
+		c_chmask   capture channel mask
+		c_srate    capture sampling rate
+		c_ssize    capture sample size (bytes)
+		p_chmask   playback channel mask
+		p_srate    playback sampling rate
+		p_ssize    playback sample size (bytes)
+		=========  ============================

Documentation/ABI/testing/debugfs-cec-error-inj

@@ -23,7 +23,7 @@ error injections without having to know the details of the driver-specific
 commands.
 
 Note that the output of 'error-inj' shall be valid as input to 'error-inj'.
-So this must work:
+So this must work::
 
 	$ cat error-inj >einj.txt
 	$ cat einj.txt >error-inj

Documentation/ABI/testing/debugfs-driver-habanalabs

@@ -20,9 +20,13 @@ Description:    Allow the root user to disable/enable in runtime the clock
                 The user can supply a bitmask value, each bit represents
                 a different engine to disable/enable its clock gating feature.
                 The bitmask is composed of 20 bits:
-                0  -  7 : DMA channels
-                8  - 11 : MME engines
-                12 - 19 : TPC engines
+
+		=======   ============
+                0  -  7   DMA channels
+                8  - 11   MME engines
+                12 - 19   TPC engines
+		=======   ============
+
                 The bit's location of a specific engine can be determined
                 using (1 << GAUDI_ENGINE_ID_*). GAUDI_ENGINE_ID_* values
                 are defined in uapi habanalabs.h file in enum gaudi_engine_id
@@ -59,6 +63,7 @@ Description:    Allows the root user to read or write directly through the
                 the generic Linux user-space PCI mapping) because the DDR bar
                 is very small compared to the DDR memory and only the driver can
                 move the bar before and after the transaction.
+
                 If the IOMMU is disabled, it also allows the root user to read
                 or write from the host a device VA of a host mapped memory
 
@@ -73,6 +78,7 @@ Description:    Allows the root user to read or write 64 bit data directly
                 the generic Linux user-space PCI mapping) because the DDR bar
                 is very small compared to the DDR memory and only the driver can
                 move the bar before and after the transaction.
+
                 If the IOMMU is disabled, it also allows the root user to read
                 or write from the host a device VA of a host mapped memory
 

Documentation/ABI/testing/debugfs-ec

@@ -6,7 +6,7 @@ Description:
 General information like which GPE is assigned to the EC and whether
 the global lock should get used.
 Knowing the EC GPE one can watch the amount of HW events related to
-the EC here (XY -> GPE number from /sys/kernel/debug/ec/*/gpe):
+the EC here (XY -> GPE number from `/sys/kernel/debug/ec/*/gpe`):
 /sys/firmware/acpi/interrupts/gpeXY
 
 The io file is binary and a userspace tool located here:
@@ -14,7 +14,8 @@ ftp://ftp.suse.com/pub/people/trenn/sources/ec/
 should get used to read out the 256 Embedded Controller registers
 or writing to them.
 
-CAUTION: Do not write to the Embedded Controller if you don't know
-what you are doing! Rebooting afterwards also is a good idea.
-This can influence the way your machine is cooled and fans may
-not get switched on again after you did a wrong write.
+CAUTION:
+  Do not write to the Embedded Controller if you don't know
+  what you are doing! Rebooting afterwards also is a good idea.
+  This can influence the way your machine is cooled and fans may
+  not get switched on again after you did a wrong write.

Documentation/ABI/testing/debugfs-moxtet

@@ -2,13 +2,19 @@ What:		/sys/kernel/debug/moxtet/input
 Date:		March 2019
 KernelVersion:	5.3
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(R) Read input from the shift registers, in hexadecimal.
+Description:	(Read) Read input from the shift registers, in hexadecimal.
 		Returns N+1 bytes, where N is the number of Moxtet connected
 		modules. The first byte is from the CPU board itself.
-		Example: 101214
-			 10: CPU board with SD card
-			 12: 2 = PCIe module, 1 = IRQ not active
-			 14: 4 = Peridot module, 1 = IRQ not active
+
+		Example::
+
+			101214
+
+		==  =======================================
+		10  CPU board with SD card
+		12  2 = PCIe module, 1 = IRQ not active
+		14  4 = Peridot module, 1 = IRQ not active
+		==  =======================================
 
 What:		/sys/kernel/debug/moxtet/output
 Date:		March 2019
@@ -17,7 +23,13 @@ Contact:	Marek Behún <marek.behun@nic.cz>
 Description:	(RW) Read last written value to the shift registers, in
 		hexadecimal, or write values to the shift registers, also
 		in hexadecimal.
-		Example: 0102
-			 01: 01 was last written, or is to be written, to the
-			     first module's shift register
-			 02: the same for second module
+
+		Example::
+
+		    0102
+
+		==  ================================================
+		01  01 was last written, or is to be written, to the
+		    first module's shift register
+		02  the same for second module
+		==  ================================================

Documentation/ABI/testing/debugfs-pfo-nx-crypto

@@ -4,42 +4,42 @@ KernelVersion:	3.4
 Contact:	Kent Yoder <key@linux.vnet.ibm.com>
 Description:
 
-  These debugfs interfaces are built by the nx-crypto driver, built in
+These debugfs interfaces are built by the nx-crypto driver, built in
 arch/powerpc/crypto/nx.
 
 Error Detection
 ===============
 
 errors:
-- A u32 providing a total count of errors since the driver was loaded. The
-only errors counted here are those returned from the hcall, H_COP_OP.
+  A u32 providing a total count of errors since the driver was loaded. The
+  only errors counted here are those returned from the hcall, H_COP_OP.
 
 last_error:
-- The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not
-recorded here (the hcall will retry until -EBUSY goes away).
+  The most recent non-zero return code from the H_COP_OP hcall. -EBUSY is not
+  recorded here (the hcall will retry until -EBUSY goes away).
 
 last_error_pid:
-- The process ID of the process who received the most recent error from the
-hcall.
+  The process ID of the process who received the most recent error from the
+  hcall.
 
 Device Use
 ==========
 
 aes_bytes:
-- The total number of bytes encrypted using AES in any of the driver's
-supported modes.
+  The total number of bytes encrypted using AES in any of the driver's
+  supported modes.
 
 aes_ops:
-- The total number of AES operations submitted to the hardware.
+  The total number of AES operations submitted to the hardware.
 
 sha256_bytes:
-- The total number of bytes hashed by the hardware using SHA-256.
+  The total number of bytes hashed by the hardware using SHA-256.
 
 sha256_ops:
-- The total number of SHA-256 operations submitted to the hardware.
+  The total number of SHA-256 operations submitted to the hardware.
 
 sha512_bytes:
-- The total number of bytes hashed by the hardware using SHA-512.
+  The total number of bytes hashed by the hardware using SHA-512.
 
 sha512_ops:
-- The total number of SHA-512 operations submitted to the hardware.
+  The total number of SHA-512 operations submitted to the hardware.

Documentation/ABI/testing/debugfs-pktcdvd

@@ -4,16 +4,15 @@ KernelVersion:  2.6.20
 Contact:        Thomas Maier <balagi@justmail.de>
 Description:
 
-debugfs interface
------------------
-
 The pktcdvd module (packet writing driver) creates
 these files in debugfs:
 
 /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
-    info            (0444) Lots of driver statistics and infos.
 
-Example:
--------
+    ====            ====== ====================================
+    info            0444   Lots of driver statistics and infos.
+    ====            ====== ====================================
+
+Example::
 
-cat /sys/kernel/debug/pktcdvd/pktcdvd0/info
+    cat /sys/kernel/debug/pktcdvd/pktcdvd0/info

Documentation/ABI/testing/debugfs-turris-mox-rwtm

@@ -2,8 +2,13 @@ What:		/sys/kernel/debug/turris-mox-rwtm/do_sign
 Date:		Jun 2020
 KernelVersion:	5.8
 Contact:	Marek Behún <marek.behun@nic.cz>
-Description:	(W) Message to sign with the ECDSA private key stored in
-		    device's OTP. The message must be exactly 64 bytes (since
-		    this is intended for SHA-512 hashes).
-		(R) The resulting signature, 136 bytes. This contains the R and
-		    S values of the ECDSA signature, both in big-endian format.
+Description:
+
+		======= ===========================================================
+		(Write) Message to sign with the ECDSA private key stored in
+		        device's OTP. The message must be exactly 64 bytes
+		        (since this is intended for SHA-512 hashes).
+		(Read)  The resulting signature, 136 bytes. This contains the
+			R and S values of the ECDSA signature, both in
+			big-endian format.
+		======= ===========================================================

Documentation/ABI/testing/debugfs-wilco-ec

@@ -27,16 +27,17 @@ Description:
 		for writing, two for the type and at least a single byte of
 		data.
 
-		Example:
-		// Request EC info type 3 (EC firmware build date)
-		// Corresponds with sending type 0x00f0 with
-		// MBOX = [38, 00, 03, 00]
-		$ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw
-		// View the result. The decoded ASCII result "12/21/18" is
-		// included after the raw hex.
-		// Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...]
-		$ cat /sys/kernel/debug/wilco_ec/raw
-		00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00  ..12/21/18.8...
+		Example::
+
+		    // Request EC info type 3 (EC firmware build date)
+		    // Corresponds with sending type 0x00f0 with
+		    // MBOX = [38, 00, 03, 00]
+		    $ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw
+		    // View the result. The decoded ASCII result "12/21/18" is
+		    // included after the raw hex.
+		    // Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...]
+		    $ cat /sys/kernel/debug/wilco_ec/raw
+		    00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00  ..12/21/18.8...
 
 		Note that the first 16 bytes of the received MBOX[] will be
 		printed, even if some of the data is junk, and skipping bytes

Documentation/ABI/testing/dell-smbios-wmi

@@ -10,29 +10,29 @@ Description:
 		<uapi/linux/wmi.h>
 
 		1) To perform an SMBIOS call from userspace, you'll need to
-		first determine the minimum size of the calling interface
-		buffer for your machine.
-		Platforms that contain larger buffers can return larger
-		objects from the system firmware.
-		Commonly this size is either 4k or 32k.
+		   first determine the minimum size of the calling interface
+		   buffer for your machine.
+		   Platforms that contain larger buffers can return larger
+		   objects from the system firmware.
+		   Commonly this size is either 4k or 32k.
 
-		To determine the size of the buffer read() a u64 dword from
-		the WMI character device /dev/wmi/dell-smbios.
+		   To determine the size of the buffer read() a u64 dword from
+		   the WMI character device /dev/wmi/dell-smbios.
 
 		2) After you've determined the minimum size of the calling
-		interface buffer, you can allocate a structure that represents
-		the structure documented above.
+		   interface buffer, you can allocate a structure that represents
+		   the structure documented above.
 
 		3) In the 'length' object store the size of the buffer you
-		determined above and allocated.
+		   determined above and allocated.
 
 		4) In this buffer object, prepare as necessary for the SMBIOS
-		call you're interested in.  Typically SMBIOS buffers have
-		"class", "select", and "input" defined to values that coincide
-		with the data you are interested in.
-		Documenting class/select/input values is outside of the scope
-		of this documentation. Check with the libsmbios project for
-		further documentation on these values.
+		   call you're interested in.  Typically SMBIOS buffers have
+		   "class", "select", and "input" defined to values that coincide
+		   with the data you are interested in.
+		   Documenting class/select/input values is outside of the scope
+		   of this documentation. Check with the libsmbios project for
+		   further documentation on these values.
 
 		6) Run the call by using ioctl() as described in the header.
 

Documentation/ABI/testing/dev-kmsg

@@ -6,6 +6,7 @@ Description:	The /dev/kmsg character device node provides userspace access
 		to the kernel's printk buffer.
 
 		Injecting messages:
+
 		Every write() to the opened device node places a log entry in
 		the kernel's printk buffer.
 
@@ -21,6 +22,7 @@ Description:	The /dev/kmsg character device node provides userspace access
 		the messages can always be reliably determined.
 
 		Accessing the buffer:
+
 		Every read() from the opened device node receives one record
 		of the kernel's printk buffer.
 
@@ -48,6 +50,7 @@ Description:	The /dev/kmsg character device node provides userspace access
 		if needed, without limiting the interface to a single reader.
 
 		The device supports seek with the following parameters:
+
 		SEEK_SET, 0
 		  seek to the first entry in the buffer
 		SEEK_END, 0
@@ -87,18 +90,22 @@ Description:	The /dev/kmsg character device node provides userspace access
 		readable context of the message, for reliable processing in
 		userspace.
 
-		Example:
-		7,160,424069,-;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
-		 SUBSYSTEM=acpi
-		 DEVICE=+acpi:PNP0A03:00
-		6,339,5140900,-;NET: Registered protocol family 10
-		30,340,5690716,-;udevd[80]: starting version 181
+		Example::
+
+		  7,160,424069,-;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
+		   SUBSYSTEM=acpi
+		   DEVICE=+acpi:PNP0A03:00
+		  6,339,5140900,-;NET: Registered protocol family 10
+		  30,340,5690716,-;udevd[80]: starting version 181
 
 		The DEVICE= key uniquely identifies devices the following way:
-		  b12:8        - block dev_t
-		  c127:3       - char dev_t
-		  n8           - netdev ifindex
-		  +sound:card0 - subsystem:devname
+
+		  ============  =================
+		  b12:8         block dev_t
+		  c127:3        char dev_t
+		  n8            netdev ifindex
+		  +sound:card0  subsystem:devname
+		  ============  =================
 
 		The flags field carries '-' by default. A 'c' indicates a
 		fragment of a line. Note, that these hints about continuation

Documentation/ABI/testing/evm

@@ -17,26 +17,33 @@ Description:
 		echoing a value to <securityfs>/evm made up of the
 		following bits:
 
+		===	  ==================================================
 		Bit	  Effect
+		===	  ==================================================
 		0	  Enable HMAC validation and creation
 		1	  Enable digital signature validation
 		2	  Permit modification of EVM-protected metadata at
 			  runtime. Not supported if HMAC validation and
 			  creation is enabled.
 		31	  Disable further runtime modification of EVM policy
+		===	  ==================================================
 
-		For example:
+		For example::
 
-		echo 1 ><securityfs>/evm
+		  echo 1 ><securityfs>/evm
 
 		will enable HMAC validation and creation
 
-		echo 0x80000003 ><securityfs>/evm
+		::
+
+		  echo 0x80000003 ><securityfs>/evm
 
 		will enable HMAC and digital signature validation and
 		HMAC creation and disable all further modification of policy.
 
-		echo 0x80000006 ><securityfs>/evm
+		::
+
+		  echo 0x80000006 ><securityfs>/evm
 
 		will enable digital signature validation, permit
 		modification of EVM-protected metadata and
@@ -65,7 +72,7 @@ Description:
 		Shows the set of extended attributes used to calculate or
 		validate the EVM signature, and allows additional attributes
 		to be added at runtime. Any signatures generated after
-		additional attributes are added (and on files posessing those
+		additional attributes are added (and on files possessing those
 		additional attributes) will only be valid if the same
 		additional attributes are configured on system boot. Writing
 		a single period (.) will lock the xattr list from any further

Documentation/ABI/testing/gpio-cdev

@@ -12,15 +12,16 @@ Description:
 		The following file operations are supported:
 
 		open(2)
-		Currently the only useful flags are O_RDWR.
+		  Currently the only useful flags are O_RDWR.
 
 		ioctl(2)
-		Initiate various actions.
-		See the inline documentation in [include/uapi]<linux/gpio.h>
-		for descriptions of all ioctls.
+		  Initiate various actions.
+
+		  See the inline documentation in [include/uapi]<linux/gpio.h>
+		  for descriptions of all ioctls.
 
 		close(2)
-		Stops and free up the I/O contexts that was associated
-		with the file descriptor.
+		  Stops and free up the I/O contexts that was associated
+		  with the file descriptor.
 
 Users:		TBD

Documentation/ABI/testing/ima_policy

@@ -15,19 +15,22 @@ Description:
 		IMA appraisal, if configured, uses these file measurements
 		for local measurement appraisal.
 
-		rule format: action [condition ...]
+		::
 
-		action: measure | dont_measure | appraise | dont_appraise |
-			audit | hash | dont_hash
-		condition:= base | lsm  [option]
+		  rule format: action [condition ...]
+
+		  action: measure | dont_measure | appraise | dont_appraise |
+			  audit | hash | dont_hash
+		  condition:= base | lsm  [option]
 			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
 				[euid=] [fowner=] [fsname=]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 			option:	[[appraise_type=]] [template=] [permit_directio]
 				[appraise_flag=] [keyrings=]
-		base: 	func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK]
-				[FIRMWARE_CHECK]
+		  base:
+			func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK]MODULE_CHECK]
+			        [FIRMWARE_CHECK]
 				[KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK]
 				[KEXEC_CMDLINE] [KEY_CHECK]
 			mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
@@ -37,8 +40,9 @@ Description:
 			uid:= decimal value
 			euid:= decimal value
 			fowner:= decimal value
-		lsm:  	are LSM specific
-		option:	appraise_type:= [imasig] [imasig|modsig]
+		  lsm:  are LSM specific
+		  option:
+			appraise_type:= [imasig] [imasig|modsig]
 			appraise_flag:= [check_blacklist]
 			Currently, blacklist check is only for files signed with appended
 			signature.
@@ -49,7 +53,7 @@ Description:
 			(eg, ima-ng). Only valid when action is "measure".
 			pcr:= decimal value
 
-		default policy:
+		  default policy:
 			# PROC_SUPER_MAGIC
 			dont_measure fsmagic=0x9fa0
 			dont_appraise fsmagic=0x9fa0
@@ -97,7 +101,8 @@ Description:
 
 		Examples of LSM specific definitions:
 
-		SELinux:
+		SELinux::
+
 			dont_measure obj_type=var_log_t
 			dont_appraise obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t
@@ -105,10 +110,11 @@ Description:
 			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
 			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
 
-		Smack:
+		Smack::
+
 			measure subj_user=_ func=FILE_CHECK mask=MAY_READ
 
-		Example of measure rules using alternate PCRs:
+		Example of measure rules using alternate PCRs::
 
 			measure func=KEXEC_KERNEL_CHECK pcr=4
 			measure func=KEXEC_INITRAMFS_CHECK pcr=5

Documentation/ABI/testing/procfs-diskstats

@@ -6,32 +6,38 @@ Description:
 		of block devices. Each line contains the following 14
 		fields:
 
-		 1 - major number
-		 2 - minor mumber
-		 3 - device name
-		 4 - reads completed successfully
-		 5 - reads merged
-		 6 - sectors read
-		 7 - time spent reading (ms)
-		 8 - writes completed
-		 9 - writes merged
-		10 - sectors written
-		11 - time spent writing (ms)
-		12 - I/Os currently in progress
-		13 - time spent doing I/Os (ms)
-		14 - weighted time spent doing I/Os (ms)
+		==  ===================================
+		 1  major number
+		 2  minor mumber
+		 3  device name
+		 4  reads completed successfully
+		 5  reads merged
+		 6  sectors read
+		 7  time spent reading (ms)
+		 8  writes completed
+		 9  writes merged
+		10  sectors written
+		11  time spent writing (ms)
+		12  I/Os currently in progress
+		13  time spent doing I/Os (ms)
+		14  weighted time spent doing I/Os (ms)
+		==  ===================================
 
 		Kernel 4.18+ appends four more fields for discard
 		tracking putting the total at 18:
 
-		15 - discards completed successfully
-		16 - discards merged
-		17 - sectors discarded
-		18 - time spent discarding
+		==  ===================================
+		15  discards completed successfully
+		16  discards merged
+		17  sectors discarded
+		18  time spent discarding
+		==  ===================================
 
 		Kernel 5.5+ appends two more fields for flush requests:
 
-		19 - flush requests completed successfully
-		20 - time spent flushing
+		==  =====================================
+		19  flush requests completed successfully
+		20  time spent flushing
+		==  =====================================
 
 		For more details refer to Documentation/admin-guide/iostats.rst

Documentation/ABI/testing/procfs-smaps_rollup

@@ -14,28 +14,28 @@ Description:
 		For more details, see Documentation/filesystems/proc.rst
 		and the procfs man page.
 
-		Typical output looks like this:
+		Typical output looks like this::
 
-		00100000-ff709000 ---p 00000000 00:00 0		 [rollup]
-		Size:               1192 kB
-		KernelPageSize:        4 kB
-		MMUPageSize:           4 kB
-		Rss:		     884 kB
-		Pss:		     385 kB
-		Pss_Anon:	     301 kB
-		Pss_File:	      80 kB
-		Pss_Shmem:	       4 kB
-		Shared_Clean:	     696 kB
-		Shared_Dirty:	       0 kB
-		Private_Clean:	     120 kB
-		Private_Dirty:	      68 kB
-		Referenced:	     884 kB
-		Anonymous:	      68 kB
-		LazyFree:	       0 kB
-		AnonHugePages:	       0 kB
-		ShmemPmdMapped:	       0 kB
-		Shared_Hugetlb:	       0 kB
-		Private_Hugetlb:       0 kB
-		Swap:		       0 kB
-		SwapPss:	       0 kB
-		Locked:		     385 kB
+			00100000-ff709000 ---p 00000000 00:00 0		 [rollup]
+			Size:               1192 kB
+			KernelPageSize:        4 kB
+			MMUPageSize:           4 kB
+			Rss:		     884 kB
+			Pss:		     385 kB
+			Pss_Anon:	     301 kB
+			Pss_File:	      80 kB
+			Pss_Shmem:	       4 kB
+			Shared_Clean:	     696 kB
+			Shared_Dirty:	       0 kB
+			Private_Clean:	     120 kB
+			Private_Dirty:	      68 kB
+			Referenced:	     884 kB
+			Anonymous:	      68 kB
+			LazyFree:	       0 kB
+			AnonHugePages:	       0 kB
+			ShmemPmdMapped:	       0 kB
+			Shared_Hugetlb:	       0 kB
+			Private_Hugetlb:       0 kB
+			Swap:		       0 kB
+			SwapPss:	       0 kB
+			Locked:		     385 kB

Documentation/ABI/testing/pstore

@@ -9,25 +9,25 @@ Description:	Generic interface to platform dependent persistent storage.
 		provide a generic interface to show records captured in
 		the dying moments.  In the case of a panic the last part
 		of the console log is captured, but other interesting
-		data can also be saved.
+		data can also be saved::
 
-		# mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore
+		    # mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore
 
-		$ ls -l /sys/fs/pstore/
-		total 0
-		-r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1
+		    $ ls -l /sys/fs/pstore/
+		    total 0
+		    -r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1
 
 		Different users of this interface will result in different
 		filename prefixes.  Currently two are defined:
 
-		"dmesg"	- saved console log
-		"mce"	- architecture dependent data from fatal h/w error
+		- "dmesg" - saved console log
+		- "mce"   - architecture dependent data from fatal h/w error
 
 		Once the information in a file has been read, removing
 		the file will signal to the underlying persistent storage
-		device that it can reclaim the space for later re-use.
+		device that it can reclaim the space for later re-use::
 
-		$ rm /sys/fs/pstore/dmesg-erst-1
+		    $ rm /sys/fs/pstore/dmesg-erst-1
 
 		The expectation is that all files in /sys/fs/pstore/
 		will be saved elsewhere and erased from persistent store
@@ -44,4 +44,3 @@ Description:	Generic interface to platform dependent persistent storage.
 		backends are available, the preferred backend may be
 		set by passing the pstore.backend= argument to the kernel at
 		boot time.
-

Documentation/ABI/testing/sysfs-block

@@ -4,23 +4,27 @@ Contact:	Jerome Marchand <jmarchan@redhat.com>
 Description:
 		The /sys/block/<disk>/stat files displays the I/O
 		statistics of disk <disk>. They contain 11 fields:
-		 1 - reads completed successfully
-		 2 - reads merged
-		 3 - sectors read
-		 4 - time spent reading (ms)
-		 5 - writes completed
-		 6 - writes merged
-		 7 - sectors written
-		 8 - time spent writing (ms)
-		 9 - I/Os currently in progress
-		10 - time spent doing I/Os (ms)
-		11 - weighted time spent doing I/Os (ms)
-		12 - discards completed
-		13 - discards merged
-		14 - sectors discarded
-		15 - time spent discarding (ms)
-		16 - flush requests completed
-		17 - time spent flushing (ms)
+
+		==  ==============================================
+		 1  reads completed successfully
+		 2  reads merged
+		 3  sectors read
+		 4  time spent reading (ms)
+		 5  writes completed
+		 6  writes merged
+		 7  sectors written
+		 8  time spent writing (ms)
+		 9  I/Os currently in progress
+		10  time spent doing I/Os (ms)
+		11  weighted time spent doing I/Os (ms)
+		12  discards completed
+		13  discards merged
+		14  sectors discarded
+		15  time spent discarding (ms)
+		16  flush requests completed
+		17  time spent flushing (ms)
+		==  ==============================================
+
 		For more details refer Documentation/admin-guide/iostats.rst
 
 

Documentation/ABI/testing/sysfs-block-device

@@ -8,11 +8,13 @@ Description:
 
 		It has the following valid values:
 
+		==	========================================================
 		0	OFF - the LED is not activated on activity
 		1	BLINK_ON - the LED blinks on every 10ms when activity is
 			detected.
 		2	BLINK_OFF - the LED is on when idle, and blinks off
 			every 10ms when activity is detected.
+		==	========================================================
 
 		Note that the user must turn sw_activity OFF it they wish to
 		control the activity LED via the em_message file.

Documentation/ABI/testing/sysfs-block-rnbd

@@ -9,9 +9,9 @@ Description:	To unmap a volume, "normal" or "force" has to be written to:
 		is using the device.  When "force" is used, the device is also unmapped
 		when device is in use.  All I/Os that are in progress will fail.
 
-		Example:
+		Example::
 
-		# echo "normal" > /sys/block/rnbd0/rnbd/unmap_device
+		  # echo "normal" > /sys/block/rnbd0/rnbd/unmap_device
 
 What:		/sys/block/rnbd<N>/rnbd/state
 Date:		Feb 2020

Documentation/ABI/testing/sysfs-bus-acpi

@@ -5,6 +5,7 @@ Description:
 		This attribute indicates the full path of ACPI namespace
 		object associated with the device object.  For example,
 		\_SB_.PCI0.
+
 		This file is not present for device objects representing
 		fixed ACPI hardware features (like power and sleep
 		buttons).
@@ -67,14 +68,16 @@ Description:
 		The return value is a decimal integer representing the device's
 		status bitmap:
 
-		Bit [0] –  Set if the device is present.
-		Bit [1] –  Set if the device is enabled and decoding its
-		           resources.
-		Bit [2] –  Set if the device should be shown in the UI.
-		Bit [3] –  Set if the device is functioning properly (cleared if
-		           device failed its diagnostics).
-		Bit [4] –  Set if the battery is present.
-		Bits [31:5] –  Reserved (must be cleared)
+		===========  ==================================================
+		Bit [0]      Set if the device is present.
+		Bit [1]      Set if the device is enabled and decoding its
+		             resources.
+		Bit [2]      Set if the device should be shown in the UI.
+		Bit [3]      Set if the device is functioning properly (cleared
+			     if device failed its diagnostics).
+		Bit [4]      Set if the battery is present.
+		Bits [31:5]  Reserved (must be cleared)
+		===========  ==================================================
 
 		If bit [0] is clear, then bit 1 must also be clear (a device
 		that is not present cannot be enabled).

Documentation/ABI/testing/sysfs-bus-coresight-devices-cti

@@ -8,50 +8,50 @@ What:		/sys/bus/coresight/devices/<cti-name>/powered
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Indicate if the CTI hardware is powered.
+Description:	(Read) Indicate if the CTI hardware is powered.
 
 What:		/sys/bus/coresight/devices/<cti-name>/ctmid
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Display the associated CTM ID
+Description:	(Read) Display the associated CTM ID
 
 What:		/sys/bus/coresight/devices/<cti-name>/nr_trigger_cons
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Number of devices connected to triggers on this CTI
+Description:	(Read) Number of devices connected to triggers on this CTI
 
 What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/name
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Name of connected device <N>
+Description:	(Read) Name of connected device <N>
 
 What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/in_signals
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Input trigger signals from connected device <N>
+Description:	(Read) Input trigger signals from connected device <N>
 
 What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/in_types
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Functional types for the input trigger signals
+Description:	(Read) Functional types for the input trigger signals
 		from connected device <N>
 
 What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/out_signals
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Output trigger signals to connected device <N>
+Description:	(Read) Output trigger signals to connected device <N>
 
 What:		/sys/bus/coresight/devices/<cti-name>/triggers<N>/out_types
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Functional types for the output trigger signals
+Description:	(Read) Functional types for the output trigger signals
 		to connected device <N>
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/inout_sel
@@ -88,7 +88,7 @@ What:		/sys/bus/coresight/devices/<cti-name>/regs/intack
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Write the INTACK register.
+Description:	(Write) Write the INTACK register.
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/appset
 Date:		March 2020
@@ -101,99 +101,99 @@ What:		/sys/bus/coresight/devices/<cti-name>/regs/appclear
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Write APPCLEAR register to deactivate channel.
+Description:	(Write) Write APPCLEAR register to deactivate channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/apppulse
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Write APPPULSE to pulse a channel active for one clock
+Description:	(Write) Write APPPULSE to pulse a channel active for one clock
 		cycle.
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/chinstatus
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Read current status of channel inputs.
+Description:	(Read) Read current status of channel inputs.
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/choutstatus
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) read current status of channel outputs.
+Description:	(Read) read current status of channel outputs.
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/triginstatus
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) read current status of input trigger signals
+Description:	(Read) read current status of input trigger signals
 
 What:		/sys/bus/coresight/devices/<cti-name>/regs/trigoutstatus
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) read current status of output trigger signals.
+Description:	(Read) read current status of output trigger signals.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/trigin_attach
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Attach a CTI input trigger to a CTM channel.
+Description:	(Write) Attach a CTI input trigger to a CTM channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/trigin_detach
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Detach a CTI input trigger from a CTM channel.
+Description:	(Write) Detach a CTI input trigger from a CTM channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/trigout_attach
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Attach a CTI output trigger to a CTM channel.
+Description:	(Write) Attach a CTI output trigger to a CTM channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/trigout_detach
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Detach a CTI output trigger from a CTM channel.
+Description:	(Write) Detach a CTI output trigger from a CTM channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_gate_enable
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(RW) Enable CTIGATE for single channel (W) or list enabled
+Description:	(RW) Enable CTIGATE for single channel (Write) or list enabled
 		channels through the gate (R).
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_gate_disable
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Disable CTIGATE for single channel.
+Description:	(Write) Disable CTIGATE for single channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_set
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Activate a single channel.
+Description:	(Write) Activate a single channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_clear
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Deactivate a single channel.
+Description:	(Write) Deactivate a single channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_pulse
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Pulse a single channel - activate for a single clock cycle.
+Description:	(Write) Pulse a single channel - activate for a single clock cycle.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/trigout_filtered
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) List of output triggers filtered across all connections.
+Description:	(Read) List of output triggers filtered across all connections.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/trig_filter_enable
 Date:		March 2020
@@ -205,13 +205,13 @@ What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_inuse
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) show channels with at least one attached trigger signal.
+Description:	(Read) show channels with at least one attached trigger signal.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_free
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) show channels with no attached trigger signals.
+Description:	(Read) show channels with no attached trigger signals.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_sel
 Date:		March 2020
@@ -224,18 +224,18 @@ What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_in
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Read to see input triggers connected to selected view
+Description:	(Read) Read to see input triggers connected to selected view
 		channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_out
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(R) Read to see output triggers connected to selected view
+Description:	(Read) Read to see output triggers connected to selected view
 		channel.
 
 What:		/sys/bus/coresight/devices/<cti-name>/channels/chan_xtrigs_reset
 Date:		March 2020
 KernelVersion	5.7
 Contact:	Mike Leach or Mathieu Poirier
-Description:	(W) Clear all channel / trigger programming.
+Description:	(Write) Clear all channel / trigger programming.

Documentation/ABI/testing/sysfs-bus-coresight-devices-etb10

@@ -4,7 +4,10 @@ KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(RW) Add/remove a sink from a trace path.  There can be multiple
 		source for a single sink.
-		ex: echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink
+
+		ex::
+
+		  echo 1 > /sys/bus/coresight/devices/20010000.etb/enable_sink
 
 What:		/sys/bus/coresight/devices/<memory_map>.etb/trigger_cntr
 Date:		November 2014
@@ -20,21 +23,21 @@ What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rdp
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Defines the depth, in words, of the trace RAM in powers of
+Description:	(Read) Defines the depth, in words, of the trace RAM in powers of
 		2.  The value is read directly from HW register RDP, 0x004.
 
 What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/sts
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the ETB status register.  The value
+Description:	(Read) Shows the value held by the ETB status register.  The value
 		is read directly from HW register STS, 0x00C.
 
 What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rrp
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the ETB RAM Read Pointer register
+Description:	(Read) Shows the value held by the ETB RAM Read Pointer register
 		that is used to read entries from the Trace RAM over the APB
 		interface.  The value is read directly from HW register RRP,
 		0x014.
@@ -43,7 +46,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/rwp
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the ETB RAM Write Pointer register
+Description:	(Read) Shows the value held by the ETB RAM Write Pointer register
 		that is used to sets the write pointer to write entries from
 		the CoreSight bus into the Trace RAM. The value is read directly
 		from HW register RWP, 0x018.
@@ -52,21 +55,21 @@ What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/trg
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Similar to "trigger_cntr" above except that this value is
+Description:	(Read) Similar to "trigger_cntr" above except that this value is
 		read directly from HW register TRG, 0x01C.
 
 What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ctl
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the ETB Control register. The value
+Description:	(Read) Shows the value held by the ETB Control register. The value
 		is read directly from HW register CTL, 0x020.
 
 What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffsr
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the ETB Formatter and Flush Status
+Description:	(Read) Shows the value held by the ETB Formatter and Flush Status
 		register.  The value is read directly from HW register FFSR,
 		0x300.
 
@@ -74,6 +77,6 @@ What:		/sys/bus/coresight/devices/<memory_map>.etb/mgmt/ffcr
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the ETB Formatter and Flush Control
+Description:	(Read) Shows the value held by the ETB Formatter and Flush Control
 		register.  The value is read directly from HW register FFCR,
 		0x304.

Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x

@@ -146,28 +146,28 @@ What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_addr_cmp
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(R) Provides the number of address comparators pairs accessible
+Description: 	(Read) Provides the number of address comparators pairs accessible
 		on a trace unit, as specified by bit 3:0 of register ETMCCR.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_cntr
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(R) Provides the number of counters accessible on a trace unit,
+Description: 	(Read) Provides the number of counters accessible on a trace unit,
 		as specified by bit 15:13 of register ETMCCR.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/nr_ctxid_cmp
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(R) Provides the number of context ID comparator available on a
+Description: 	(Read) Provides the number of context ID comparator available on a
 		trace unit, as specified by bit 25:24 of register ETMCCR.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/reset
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(W) Cancels all configuration on a trace unit and set it back
+Description: 	(Write) Cancels all configuration on a trace unit and set it back
 		to its boot configuration.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/seq_12_event
@@ -216,7 +216,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/curr_seq_state
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(R) Holds the current state of the sequencer.
+Description: 	(Read) Holds the current state of the sequencer.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/sync_freq
 Date:		November 2014

Documentation/ABI/testing/sysfs-bus-coresight-devices-stm

@@ -42,7 +42,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.stm/status
 Date:		April 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) List various control and status registers.  The specific
+Description:	(Read) List various control and status registers.  The specific
 		layout and content is driver specific.
 
 What:		/sys/bus/coresight/devices/<memory_map>.stm/traceid

Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc

@@ -11,21 +11,21 @@ What:           /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rsz
 Date:           March 2016
 KernelVersion:  4.7
 Contact:        Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:    (R) Defines the size, in 32-bit words, of the local RAM buffer.
+Description:    (Read) Defines the size, in 32-bit words, of the local RAM buffer.
                 The value is read directly from HW register RSZ, 0x004.
 
 What:           /sys/bus/coresight/devices/<memory_map>.tmc/mgmt/sts
 Date:           March 2016
 KernelVersion:  4.7
 Contact:        Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC status register.  The value
+Description:	(Read) Shows the value held by the TMC status register.  The value
                 is read directly from HW register STS, 0x00C.
 
 What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rrp
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC RAM Read Pointer register
+Description:	(Read) Shows the value held by the TMC RAM Read Pointer register
 		that is used to read entries from the Trace RAM over the APB
 		interface.  The value is read directly from HW register RRP,
 		0x014.
@@ -34,7 +34,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/rwp
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC RAM Write Pointer register
+Description:	(Read) Shows the value held by the TMC RAM Write Pointer register
 		that is used to sets the write pointer to write entries from
 		the CoreSight bus into the Trace RAM. The value is read directly
 		from HW register RWP, 0x018.
@@ -43,21 +43,21 @@ What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/trg
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Similar to "trigger_cntr" above except that this value is
+Description:	(Read) Similar to "trigger_cntr" above except that this value is
 		read directly from HW register TRG, 0x01C.
 
 What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ctl
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC Control register. The value
+Description:	(Read) Shows the value held by the TMC Control register. The value
 		is read directly from HW register CTL, 0x020.
 
 What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffsr
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC Formatter and Flush Status
+Description:	(Read) Shows the value held by the TMC Formatter and Flush Status
 		register.  The value is read directly from HW register FFSR,
 		0x300.
 
@@ -65,7 +65,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/ffcr
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC Formatter and Flush Control
+Description:	(Read) Shows the value held by the TMC Formatter and Flush Control
 		register.  The value is read directly from HW register FFCR,
 		0x304.
 
@@ -73,7 +73,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/mode
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Shows the value held by the TMC Mode register, which
+Description:	(Read) Shows the value held by the TMC Mode register, which
 		indicate the mode the device has been configured to enact.  The
 		The value is read directly from the MODE register, 0x028.
 
@@ -81,7 +81,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.tmc/mgmt/devid
 Date:		March 2016
 KernelVersion:	4.7
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) Indicates the capabilities of the Coresight TMC.
+Description:	(Read) Indicates the capabilities of the Coresight TMC.
 		The value is read directly from the DEVID register, 0xFC8,
 
 What:		/sys/bus/coresight/devices/<memory_map>.tmc/buffer_size

Documentation/ABI/testing/sysfs-bus-css

@@ -20,6 +20,7 @@ Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
 Description:	Contains the ids of the channel paths used by this
 		subchannel, as reported by the channel subsystem
 		during subchannel recognition.
+
 		Note: This is an I/O-subchannel specific attribute.
 Users:		s390-tools, HAL
 
@@ -31,6 +32,7 @@ Description:	Contains the PIM/PAM/POM values, as reported by the
 		channel subsystem when last queried by the common I/O
 		layer (this implies that this attribute is not necessarily
 		in sync with the values current in the channel subsystem).
+
 		Note: This is an I/O-subchannel specific attribute.
 Users:		s390-tools, HAL
 
@@ -53,6 +55,7 @@ Description:	This file allows the driver for a device to be specified. When
 		opt-out of driver binding using a driver_override name such as
 		"none".  Only a single driver may be specified in the override,
 		there is no support for parsing delimiters.
+
 		Note that unlike the mechanism of the same name for pci, this
 		file does not allow to override basic matching rules. I.e.,
 		the driver must still match the subchannel type of the device.

Documentation/ABI/testing/sysfs-bus-dfl

@@ -4,6 +4,7 @@ KernelVersion:	5.10
 Contact:	Xu Yilun <yilun.xu@intel.com>
 Description:	Read-only. It returns type of DFL FIU of the device. Now DFL
 		supports 2 FIU types, 0 for FME, 1 for PORT.
+
 		Format: 0x%x
 
 What:		/sys/bus/dfl/devices/dfl_dev.X/feature_id
@@ -12,4 +13,5 @@ KernelVersion:	5.10
 Contact:	Xu Yilun <yilun.xu@intel.com>
 Description:	Read-only. It returns feature identifier local to its DFL FIU
 		type.
+
 		Format: 0x%x

Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme

@@ -8,13 +8,13 @@ Description:	Read-only. Attribute group to describe the magic bits
 
 		Each attribute under this group defines a bit range of the
 		perf_event_attr.config. All supported attributes are listed
-		below.
+		below::
 
 		    event  = "config:0-11"  - event ID
 		    evtype = "config:12-15" - event type
 		    portid = "config:16-23" - event source
 
-		For example,
+		For example::
 
 		    fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff"
 
@@ -40,11 +40,11 @@ Description:	Read-only. Attribute group to describe performance monitoring
 
 		All supported performance monitoring events are listed below.
 
-		Basic events (evtype=0x00)
+		Basic events (evtype=0x00)::
 
 		    clock = "event=0x00,evtype=0x00,portid=0xff"
 
-		Cache events (evtype=0x01)
+		Cache events (evtype=0x01)::
 
 		    cache_read_hit      = "event=0x00,evtype=0x01,portid=0xff"
 		    cache_read_miss     = "event=0x01,evtype=0x01,portid=0xff"
@@ -59,7 +59,7 @@ Description:	Read-only. Attribute group to describe performance monitoring
 		    cache_rx_req_stall  = "event=0x09,evtype=0x01,portid=0xff"
 		    cache_eviction      = "event=0x0a,evtype=0x01,portid=0xff"
 
-		Fabric events (evtype=0x02)
+		Fabric events (evtype=0x02)::
 
 		    fab_pcie0_read       = "event=0x00,evtype=0x02,portid=0xff"
 		    fab_pcie0_write      = "event=0x01,evtype=0x02,portid=0xff"
@@ -78,7 +78,7 @@ Description:	Read-only. Attribute group to describe performance monitoring
 		    fab_port_mmio_read   = "event=0x06,evtype=0x02,portid=?"
 		    fab_port_mmio_write  = "event=0x07,evtype=0x02,portid=?"
 
-		VTD events (evtype=0x03)
+		VTD events (evtype=0x03)::
 
 		    vtd_port_read_transaction  = "event=0x00,evtype=0x03,portid=?"
 		    vtd_port_write_transaction = "event=0x01,evtype=0x03,portid=?"
@@ -88,7 +88,7 @@ Description:	Read-only. Attribute group to describe performance monitoring
 		    vtd_port_devtlb_2m_fill    = "event=0x05,evtype=0x03,portid=?"
 		    vtd_port_devtlb_1g_fill    = "event=0x06,evtype=0x03,portid=?"
 
-		VTD SIP events (evtype=0x04)
+		VTD SIP events (evtype=0x04)::
 
 		    vtd_sip_iotlb_4k_hit  = "event=0x00,evtype=0x04,portid=0xff"
 		    vtd_sip_iotlb_2m_hit  = "event=0x01,evtype=0x04,portid=0xff"

Documentation/ABI/testing/sysfs-bus-event_source-devices-format

@@ -10,7 +10,8 @@ Description:
 		name/value pairs.
 
 		Userspace must be prepared for the possibility that attributes
-		define overlapping bit ranges. For example:
+		define overlapping bit ranges. For example::
+
 			attr1 = 'config:0-23'
 			attr2 = 'config:0-7'
 			attr3 = 'config:12-35'

Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7

@@ -7,7 +7,7 @@ Description:    Read-only. Attribute group to describe the magic bits
 
                 Each attribute under this group defines a bit range of the
                 perf_event_attr.config. All supported attributes are listed
-                below.
+                below::
 
 				chip = "config:16-31"
 				core  = "config:16-31"
@@ -16,9 +16,9 @@ Description:    Read-only. Attribute group to describe the magic bits
 				offset = "config:32-63"
 				vcpu = "config:16-31"
 
-               For example,
+                For example::
 
-		PM_PB_CYC =  "domain=1,offset=0x80,chip=?,lpar=0x0"
+		  PM_PB_CYC =  "domain=1,offset=0x80,chip=?,lpar=0x0"
 
 		In this event, '?' after chip specifies that
 		this value will be provided by user while running this event.

Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci

@@ -7,7 +7,7 @@ Description:    Read-only. Attribute group to describe the magic bits
 
                 Each attribute under this group defines a bit range of the
                 perf_event_attr.config. All supported attributes are listed
-                below.
+                below::
 
 				counter_info_version  = "config:16-23"
 				length  = "config:24-31"
@@ -20,9 +20,9 @@ Description:    Read-only. Attribute group to describe the magic bits
 				secondary_index = "config:0-15"
 				starting_index = "config:32-63"
 
-               For example,
+                For example::
 
-		processor_core_utilization_instructions_completed = "request=0x94,
+		  processor_core_utilization_instructions_completed = "request=0x94,
 					phys_processor_idx=?,counter_info_version=0x8,
 					length=8,offset=0x18"
 
@@ -36,6 +36,7 @@ Description:
 		'0' if the hypervisor is configured to forbid access to event
 		counters being accumulated by other guests and to physical
 		domain event counters.
+
 		'1' if that access is allowed.
 
 What:		/sys/bus/event_source/devices/hv_gpci/interface/ga

Documentation/ABI/testing/sysfs-bus-fcoe

@@ -3,16 +3,19 @@ Date:		August 2012
 KernelVersion:	TBD
 Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
 Description:	The FCoE bus. Attributes in this directory are control interfaces.
+
 Attributes:
 
-	ctlr_create: 'FCoE Controller' instance creation interface. Writing an
+	ctlr_create:
+		     'FCoE Controller' instance creation interface. Writing an
 		     <ifname> to this file will allocate and populate sysfs with a
 		     fcoe_ctlr_device (ctlr_X). The user can then configure any
 		     per-port settings and finally write to the fcoe_ctlr_device's
 		     'start' attribute to begin the kernel's discovery and login
 		     process.
 
-	ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a
+	ctlr_destroy:
+		       'FCoE Controller' instance removal interface. Writing a
 		       fcoe_ctlr_device's sysfs name to this file will log the
 		       fcoe_ctlr_device out of the fabric or otherwise connected
 		       FCoE devices. It will also free all kernel memory allocated
@@ -32,11 +35,13 @@ Description:	'FCoE Controller' instances on the fcoe bus.
 
 Attributes:
 
-	fcf_dev_loss_tmo: Device loss timeout period (see below). Changing
+	fcf_dev_loss_tmo:
+			  Device loss timeout period (see below). Changing
 			  this value will change the dev_loss_tmo for all
 			  FCFs discovered by this controller.
 
-	mode:		  Display or change the FCoE Controller's mode. Possible
+	mode:
+			  Display or change the FCoE Controller's mode. Possible
 			  modes are 'Fabric' and 'VN2VN'. If a FCoE Controller
 			  is started in 'Fabric' mode then FIP FCF discovery is
 			  initiated and ultimately a fabric login is attempted.
@@ -44,23 +49,30 @@ Attributes:
 			  FIP VN2VN discovery and login is performed. A FCoE
 			  Controller only supports one mode at a time.
 
-	enabled:	  Whether an FCoE controller is enabled or disabled.
+	enabled:
+			  Whether an FCoE controller is enabled or disabled.
 			  0 if disabled, 1 if enabled. Writing either 0 or 1
 			  to this file will enable or disable the FCoE controller.
 
-	lesb/link_fail:   Link Error Status Block (LESB) link failure count.
+	lesb/link_fail:
+			  Link Error Status Block (LESB) link failure count.
 
-	lesb/vlink_fail:  Link Error Status Block (LESB) virtual link
+	lesb/vlink_fail:
+		          Link Error Status Block (LESB) virtual link
 			  failure count.
 
-	lesb/miss_fka:    Link Error Status Block (LESB) missed FCoE
+	lesb/miss_fka:
+			  Link Error Status Block (LESB) missed FCoE
 			  Initialization Protocol (FIP) Keep-Alives (FKA).
 
-	lesb/symb_err:    Link Error Status Block (LESB) symbolic error count.
+	lesb/symb_err:
+			  Link Error Status Block (LESB) symbolic error count.
 
-	lesb/err_block:   Link Error Status Block (LESB) block error count.
+	lesb/err_block:
+			  Link Error Status Block (LESB) block error count.
 
-	lesb/fcs_error:   Link Error Status Block (LESB) Fibre Channel
+	lesb/fcs_error:
+			  Link Error Status Block (LESB) Fibre Channel
 			  Services error count.
 
 Notes: ctlr_X (global increment starting at 0)
@@ -75,31 +87,41 @@ Description:	'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel
 		Fibre Channel frames into a FC fabric. It can also take
 		outbound FC frames and pack them in Ethernet packets to
 		be sent to their destination on the Ethernet segment.
+
 Attributes:
 
-	fabric_name: Identifies the fabric that the FCF services.
+	fabric_name:
+		     Identifies the fabric that the FCF services.
 
-	switch_name: Identifies the FCF.
+	switch_name:
+		     Identifies the FCF.
 
-	priority:    The switch's priority amongst other FCFs on the same
+	priority:
+		     The switch's priority amongst other FCFs on the same
 		     fabric.
 
-	selected:    1 indicates that the switch has been selected for use;
+	selected:
+		     1 indicates that the switch has been selected for use;
 		     0 indicates that the switch will not be used.
 
-	fc_map:      The Fibre Channel MAP
+	fc_map:
+		     The Fibre Channel MAP
 
-	vfid:	     The Virtual Fabric ID
+	vfid:
+		     The Virtual Fabric ID
 
-	mac:         The FCF's MAC address
+	mac:
+		     The FCF's MAC address
 
-	fka_period:  The FIP Keep-Alive period
+	fka_period:
+		     The FIP Keep-Alive period
 
 	fabric_state: The internal kernel state
-		      "Unknown" - Initialization value
-		      "Disconnected" - No link to the FCF/fabric
-		      "Connected" - Host is connected to the FCF
-		      "Deleted" - FCF is being removed from the system
+
+		      - "Unknown" - Initialization value
+		      - "Disconnected" - No link to the FCF/fabric
+		      - "Connected" - Host is connected to the FCF
+		      - "Deleted" - FCF is being removed from the system
 
 	dev_loss_tmo: The device loss timeout period for this FCF.
 

Documentation/ABI/testing/sysfs-bus-fsl-mc

@@ -6,8 +6,10 @@ Description:
 		the driver to attempt to bind to the device found at
 		this location. The format for the location is Object.Id
 		and is the same as found in /sys/bus/fsl-mc/devices/.
-                For example:
-		# echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind
+
+                For example::
+
+		  # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/bind
 
 What:		/sys/bus/fsl-mc/drivers/.../unbind
 Date:		December 2016
@@ -17,5 +19,7 @@ Description:
 		driver to attempt to unbind from the device found at
 		this location. The format for the location is Object.Id
 		and is the same as found in /sys/bus/fsl-mc/devices/.
-                For example:
-		# echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind
+
+                For example::
+
+		  # echo dpni.2 > /sys/bus/fsl-mc/drivers/fsl_dpaa2_eth/unbind

Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480

@@ -3,19 +3,25 @@ Date:		February 2011
 Contact:	Minkyu Kang <mk7.kang@samsung.com>
 Description:
 		show what device is attached
-		NONE - no device
-		USB - USB device is attached
-		UART - UART is attached
-		CHARGER - Charger is attaced
-		JIG - JIG is attached
+
+		=======  ======================
+		NONE     no device
+		USB      USB device is attached
+		UART     UART is attached
+		CHARGER  Charger is attaced
+		JIG      JIG is attached
+		=======  ======================
 
 What:		/sys/bus/i2c/devices/.../switch
 Date:		February 2011
 Contact:	Minkyu Kang <mk7.kang@samsung.com>
 Description:
 		show or set the state of manual switch
-		VAUDIO - switch to VAUDIO path
-		UART - switch to UART path
-		AUDIO - switch to AUDIO path
-		DHOST - switch to DHOST path
-		AUTO - switch automatically by device
+
+		=======  ==============================
+		VAUDIO   switch to VAUDIO path
+		UART     switch to UART path
+		AUDIO    switch to AUDIO path
+		DHOST    switch to DHOST path
+		AUTO     switch automatically by device
+		=======  ==============================

Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x

@@ -6,15 +6,18 @@ Description:
 		Value that exists only for mux devices that can be
 		written to control the behaviour of the multiplexer on
 		idle. Possible values:
-		-2 - disconnect on idle, i.e. deselect the last used
-		     channel, which is useful when there is a device
-		     with an address that conflicts with another
-		     device on another mux on the same parent bus.
-		-1 - leave the mux as-is, which is the most optimal
-		     setting in terms of I2C operations and is the
-		     default mode.
-		0..<nchans> - set the mux to a predetermined channel,
-		     which is useful if there is one channel that is
-		     used almost always, and you want to reduce the
-		     latency for normal operations after rare
-		     transactions on other channels
+
+		===========  ===============================================
+		-2	     disconnect on idle, i.e. deselect the last used
+			     channel, which is useful when there is a device
+			     with an address that conflicts with another
+			     device on another mux on the same parent bus.
+		-1	     leave the mux as-is, which is the most optimal
+			     setting in terms of I2C operations and is the
+			     default mode.
+		0..<nchans>  set the mux to a predetermined channel,
+			     which is useful if there is one channel that is
+			     used almost always, and you want to reduce the
+			     latency for normal operations after rare
+			     transactions on other channels
+		===========  ===============================================

Documentation/ABI/testing/sysfs-bus-i3c

@@ -84,6 +84,7 @@ Description:
 		by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl".
 		See the I3C specification for more details about these HDR
 		modes.
+
 		This entry describes the HDRCAP of the master controller
 		driving the bus.
 
@@ -135,6 +136,7 @@ Description:
 		Expose the HDR (High Data Rate) capabilities of a device.
 		Returns a list of supported HDR mode, each element is separated
 		by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl".
+
 		See the I3C specification for more details about these HDR
 		modes.
 

Documentation/ABI/testing/sysfs-bus-iio

@@ -15,6 +15,7 @@ Description:
 		based on hardware generated events (e.g. data ready) or
 		provided by a separate driver for other hardware (e.g.
 		periodic timer, GPIO or high resolution timer).
+
 		Contains trigger type specific elements. These do not
 		generalize well and hence are not documented in this file.
 		X is the IIO index of the trigger.
@@ -65,6 +66,7 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		When the internal sampling clock can only take a specific set of
 		frequencies, we can specify the available values with:
+
 		- a small discrete set of values like "0 2 4 6 8"
 		- a range with minimum, step and maximum frequencies like
 		  "[min step max]"
@@ -665,6 +667,7 @@ Description:
 		<type>[Y][_name]_<raw|input>_thresh_falling_value may take
 		different values, but the device can only enable both thresholds
 		or neither.
+
 		Note the driver will assume the last p events requested are
 		to be enabled where p is how many it supports (which may vary
 		depending on the exact set requested. So if you want to be
@@ -719,6 +722,7 @@ Description:
 		<type>[Y][_name]_<raw|input>_roc_falling_value may take
 		different values, but the device can only enable both rate of
 		change thresholds or neither.
+
 		Note the driver will assume the last p events requested are
 		to be enabled where p is however many it supports (which may
 		vary depending on the exact set requested. So if you want to be
@@ -774,9 +778,11 @@ Description:
 		Specifies the value of threshold that the device is comparing
 		against for the events enabled by
 		<type>Y[_name]_thresh[_rising|falling]_en.
+
 		If separate attributes exist for the two directions, but
 		direction is not specified for this attribute, then a single
 		threshold value applies to both directions.
+
 		The raw or input element of the name indicates whether the
 		value is in raw device units or in processed units (as _raw
 		and _input do on sysfs direct channel read attributes).
@@ -859,6 +865,7 @@ Description:
 		If separate attributes exist for the two directions, but
 		direction is not specified for this attribute, then a single
 		hysteresis value applies to both directions.
+
 		For falling events the hysteresis is added to the _value attribute for
 		this event to get the upper threshold for when the event goes back to
 		normal, for rising events the hysteresis is subtracted from the _value
@@ -905,6 +912,7 @@ Description:
 		Specifies the value of rate of change threshold that the
 		device is comparing against for the events enabled by
 		<type>[Y][_name]_roc[_rising|falling]_en.
+
 		If separate attributes exist for the two directions,
 		but direction is not specified for this attribute,
 		then a single threshold value applies to both directions.
@@ -1304,6 +1312,7 @@ Description:
 		Proximity measurement indicating that some
 		object is near the sensor, usually by observing
 		reflectivity of infrared or ultrasound emitted.
+
 		Often these sensors are unit less and as such conversion
 		to SI units is not possible. Higher proximity measurements
 		indicate closer objects, and vice versa. Units after
@@ -1449,9 +1458,12 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		A single positive integer specifying the maximum number of scan
 		elements to wait for.
+
 		Poll will block until the watermark is reached.
+
 		Blocking read will wait until the minimum between the requested
 		read amount or the low water mark is available.
+
 		Non-blocking read will retrieve the available samples from the
 		buffer even if there are less samples then watermark level. This
 		allows the application to block on poll with a timeout and read
@@ -1480,11 +1492,13 @@ Description:
 		device settings allows it (e.g. if a trigger is set that samples
 		data differently that the hardware fifo does then hardware fifo
 		will not enabled).
+
 		If the hardware fifo is enabled and the level of the hardware
 		fifo reaches the hardware fifo watermark level the device will
 		flush its hardware fifo to the device buffer. Doing a non
 		blocking read on the device when no samples are present in the
 		device buffer will also force a flush.
+
 		When the hardware fifo is enabled there is no need to use a
 		trigger to use buffer mode since the watermark settings
 		guarantees that the hardware fifo is flushed to the device
@@ -1522,6 +1536,7 @@ Description:
 		A single positive integer specifying the minimum watermark level
 		for the hardware fifo of this device. If the device does not
 		have a hardware fifo this entry is not present.
+
 		If the user sets buffer/watermark to a value less than this one,
 		then the hardware watermark will remain unset.
 
@@ -1532,6 +1547,7 @@ Description:
 		A single positive integer specifying the maximum watermark level
 		for the hardware fifo of this device. If the device does not
 		have a hardware fifo this entry is not present.
+
 		If the user sets buffer/watermark to a value greater than this
 		one, then the hardware watermark will be capped at this value.
 
@@ -1543,6 +1559,7 @@ Description:
 		levels for the hardware fifo. This entry is optional and if it
 		is not present it means that all the values between
 		hwfifo_watermark_min and hwfifo_watermark_max are supported.
+
 		If the user sets buffer/watermark to a value greater than
 		hwfifo_watermak_min but not equal to any of the values in this
 		list, the driver will chose an appropriate value for the
@@ -1604,7 +1621,8 @@ KernelVersion:	4.1.0
 Contact:	linux-iio@vger.kernel.org
 Description:
 		'1' (enable) or '0' (disable) specifying the enable
-		of heater function. Same reading values apply
+		of heater function. Same reading values apply.
+
 		This ABI is especially applicable for humidity sensors
 		to heatup the device and get rid of any condensation
 		in some humidity environment
@@ -1627,17 +1645,21 @@ Description:
 		Mounting matrix for IIO sensors. This is a rotation matrix which
 		informs userspace about sensor chip's placement relative to the
 		main hardware it is mounted on.
+
 		Main hardware placement is defined according to the local
 		reference frame related to the physical quantity the sensor
 		measures.
+
 		Given that the rotation matrix is defined in a board specific
 		way (platform data and / or device-tree), the main hardware
 		reference frame definition is left to the implementor's choice
 		(see below for a magnetometer example).
+
 		Applications should apply this rotation matrix to samples so
 		that when main hardware reference frame is aligned onto local
 		reference frame, then sensor chip reference frame is also
 		perfectly aligned with it.
+
 		Matrix is a 3x3 unitary matrix and typically looks like
 		[0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix
 		[1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware
@@ -1646,8 +1668,10 @@ Description:
 		For example, a mounting matrix for a magnetometer sensor informs
 		userspace about sensor chip's ORIENTATION relative to the main
 		hardware.
+
 		More specifically, main hardware orientation is defined with
 		respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where :
+
 		* Y is in the ground plane and positive towards magnetic North ;
 		* X is in the ground plane, perpendicular to the North axis and
 		  positive towards the East ;
@@ -1656,13 +1680,16 @@ Description:
 		An implementor might consider that for a hand-held device, a
 		'natural' orientation would be 'front facing camera at the top'.
 		The main hardware reference frame could then be described as :
+
 		* Y is in the plane of the screen and is positive towards the
 		  top of the screen ;
 		* X is in the plane of the screen, perpendicular to Y axis, and
 		  positive towards the right hand side of the screen ;
 		* Z is perpendicular to the screen plane and positive out of the
 		  screen.
+
 		Another example for a quadrotor UAV might be :
+
 		* Y is in the plane of the propellers and positive towards the
 		  front-view camera;
 		* X is in the plane of the propellers, perpendicular to Y axis,
@@ -1704,6 +1731,7 @@ Description:
 		This interface is deprecated; please use the Counter subsystem.
 
 		A list of possible counting directions which are:
+
 		- "up"	: counter device is increasing.
 		- "down": counter device is decreasing.
 

Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector

@@ -5,7 +5,8 @@ Contact:	Peter Rosin <peda@axentia.se>
 Description:
 		The DAC is used to find the peak level of an alternating
 		voltage input signal by a binary search using the output
-		of a comparator wired to an interrupt pin. Like so:
+		of a comparator wired to an interrupt pin. Like so::
+
 		                           _
 		                          | \
 		     input +------>-------|+ \
@@ -19,10 +20,12 @@ Description:
 		            |    irq|------<-------'
 		            |       |
 		            '-------'
+
 		The boolean invert attribute (0/1) should be set when the
 		input signal is centered around the maximum value of the
 		dac instead of zero. The envelope detector will search
 		from below in this case and will also invert the result.
+
 		The edge/level of the interrupt is also switched to its
 		opposite value.
 

Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435

@@ -19,9 +19,11 @@ Description:
 		is separately set for "GND-Open" and "Supply-Open" modes.
 		Channels 0..31 have common low threshold values, but could have different
 		sensing_modes.
+
 		The low voltage threshold range is between 2..21V.
 		Hysteresis between low and high thresholds can not be lower then 2 and
 		can not be odd.
+
 		If falling threshold results hysteresis to odd value then rising
 		threshold is automatically subtracted by one.
 
@@ -34,10 +36,13 @@ Description:
 		this value then the threshold rising event is pushed.
 		Depending on in_voltageY_sensing_mode the high voltage threshold
 		is separately set for "GND-Open" and "Supply-Open" modes.
+
 		Channels 0..31 have common high threshold values, but could have different
 		sensing_modes.
+
 		The high voltage threshold range is between 3..22V.
 		Hysteresis between low and high thresholds can not be lower then 2 and
 		can not be odd.
+
 		If rising threshold results hysteresis to odd value then falling
 		threshold is automatically appended by one.

Documentation/ABI/testing/sysfs-bus-iio-adc-stm32

@@ -5,10 +5,13 @@ Description:
 		The STM32 ADC can be configured to use external trigger sources
 		(e.g. timers, pwm or exti gpio). Then, it can be tuned to start
 		conversions on external trigger by either:
+
 		- "rising-edge"
 		- "falling-edge"
 		- "both-edges".
+
 		Reading returns current trigger polarity.
+
 		Writing value before enabling conversions sets trigger polarity.
 
 What:		/sys/bus/iio/devices/triggerX/trigger_polarity_available

Documentation/ABI/testing/sysfs-bus-iio-cros-ec

@@ -4,7 +4,7 @@ KernelVersion:	4.7
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Writing '1' will perform a FOC (Fast Online Calibration). The
-                corresponding calibration offsets can be read from *_calibbias
+                corresponding calibration offsets can be read from `*_calibbias`
                 entries.
 
 What:		/sys/bus/iio/devices/iio:deviceX/location

Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32

@@ -3,14 +3,20 @@ KernelVersion:	4.14
 Contact:	arnaud.pouliquen@st.com
 Description:
 		For audio purpose only.
+
 		Used by audio driver to set/get the spi input frequency.
+
 		This is mandatory if DFSDM is slave on SPI bus, to
 		provide information on the SPI clock frequency during runtime
 		Notice that the SPI frequency should be a multiple of sample
 		frequency to ensure the precision.
-		if DFSDM input is SPI master
+
+		if DFSDM input is SPI master:
+
 			Reading  SPI clkout frequency,
 			error on writing
+
 		If DFSDM input is SPI Slave:
+
 			Reading returns value previously set.
 			Writing value before starting conversions.

Documentation/ABI/testing/sysfs-bus-iio-distance-srf08

@@ -15,8 +15,11 @@ Description:
 		first object echoed in meters. Default value is 6.020.
 		This setting limits the time the driver is waiting for a
 		echo.
+
 		Showing the range of available values is represented as the
 		minimum value, the step and the maximum value, all enclosed
 		in square brackets.
-		Example:
-		[0.043 0.043 11.008]
+
+		Example::
+
+			[0.043 0.043 11.008]

Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523

@@ -8,7 +8,9 @@ KernelVersion:	3.4.0
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Reading returns either '1' or '0'.
+
 		'1' means that the clock in question is present.
+
 		'0' means that the clock is missing.
 
 What:		/sys/bus/iio/devices/iio:deviceX/pllY_locked

Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371

@@ -27,12 +27,12 @@ What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_name
 KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Reading returns the datasheet name for channel Y:
+		Reading returns the datasheet name for channel Y::
 
-		out_altvoltage0_name: RF8x
-		out_altvoltage1_name: RFAUX8x
-		out_altvoltage2_name: RF16x
-		out_altvoltage3_name: RF32x
+		  out_altvoltage0_name: RF8x
+		  out_altvoltage1_name: RFAUX8x
+		  out_altvoltage2_name: RF16x
+		  out_altvoltage3_name: RF32x
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
 KernelVersion:

Documentation/ABI/testing/sysfs-bus-iio-health-afe440x

@@ -6,10 +6,14 @@ Description:
 		Get measured values from the ADC for these stages. Y is the
 		specific stage number corresponding to datasheet stage names
 		as follows:
-		1 -> LED2
-		2 -> ALED2/LED3
-		3 -> LED1
-		4 -> ALED1/LED4
+
+		== ==========
+		1  LED2
+		2  ALED2/LED3
+		3  LED1
+		4  ALED1/LED4
+		== ==========
+
 		Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1
 		respectively which simply helper channels containing the
 		calculated difference in the value of stage 1 - 2 and 3 - 4.

Documentation/ABI/testing/sysfs-bus-iio-light-isl29018

@@ -15,5 +15,7 @@ Description:
 		Scheme 0 has wider dynamic range, Scheme 1 proximity detection
 		is less affected by the ambient IR noise variation.
 
-		0 Sensing IR from LED and ambient
-		1 Sensing IR from LED with ambient IR rejection
+		== =============================================
+		0  Sensing IR from LED and ambient
+		1  Sensing IR from LED with ambient IR rejection
+		== =============================================

Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32

@@ -17,9 +17,11 @@ KernelVersion:	4.13
 Contact:	fabrice.gasnier@st.com
 Description:
 		Configure the device counter quadrature modes:
+
 		- non-quadrature:
 			Encoder IN1 input servers as the count input (up
 			direction).
+
 		- quadrature:
 			Encoder IN1 and IN2 inputs are mixed to get direction
 			and count.
@@ -35,23 +37,26 @@ KernelVersion:	4.13
 Contact:	fabrice.gasnier@st.com
 Description:
 		Configure the device encoder/counter active edge:
+
 		- rising-edge
 		- falling-edge
 		- both-edges
 
 		In non-quadrature mode, device counts up on active edge.
+
 		In quadrature mode, encoder counting scenarios are as follows:
-		----------------------------------------------------------------
+
+		+---------+----------+--------------------+--------------------+
 		| Active  | Level on |      IN1 signal    |     IN2 signal     |
-		| edge    | opposite |------------------------------------------
+		| edge    | opposite +----------+---------+----------+---------+
 		|         | signal   |  Rising  | Falling |  Rising  | Falling |
-		----------------------------------------------------------------
-		| Rising  | High ->  |   Down   |    -    |    Up    |    -    |
-		| edge    | Low  ->  |    Up    |    -    |   Down   |    -    |
-		----------------------------------------------------------------
-		| Falling | High ->  |    -     |    Up   |    -     |   Down  |
-		| edge    | Low  ->  |    -     |   Down  |    -     |    Up   |
-		----------------------------------------------------------------
-		| Both    | High ->  |   Down   |    Up   |    Up    |   Down  |
-		| edges   | Low  ->  |    Up    |   Down  |   Down   |    Up   |
-		----------------------------------------------------------------
+		+---------+----------+----------+---------+----------+---------+
+		| Rising  | High ->  |   Down   |    -    |   Up     |    -    |
+		| edge    | Low  ->  |   Up     |    -    |   Down   |    -    |
+		+---------+----------+----------+---------+----------+---------+
+		| Falling | High ->  |    -     |   Up    |    -     |   Down  |
+		| edge    | Low  ->  |    -     |   Down  |    -     |   Up    |
+		+---------+----------+----------+---------+----------+---------+
+		| Both    | High ->  |   Down   |   Up    |   Up     |   Down  |
+		| edges   | Low  ->  |   Up     |   Down  |   Down   |   Up    |
+		+---------+----------+----------+---------+----------+---------+

Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843

@@ -5,11 +5,16 @@ Contact:        linux-iio@vger.kernel.org
 Description:
                 Current configuration and available configurations
 		for the bias current.
-		normal		- Normal measurement configurations (default)
-		positivebias	- Positive bias configuration
-		negativebias	- Negative bias configuration
-		disabled	- Only available on HMC5983. Disables magnetic
+
+		============	  ============================================
+		normal		  Normal measurement configurations (default)
+		positivebias	  Positive bias configuration
+		negativebias	  Negative bias configuration
+		disabled	  Only available on HMC5983. Disables magnetic
 				  sensor and enables temperature sensor.
-		Note: The effect of this configuration may vary
-		according to the device. For exact documentation
-		check the device's datasheet.
+		============	  ============================================
+
+		Note:
+		  The effect of this configuration may vary
+		  according to the device. For exact documentation
+		  check the device's datasheet.

Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856

@@ -5,9 +5,12 @@ Description:
 		Open-circuit fault. The detection of open-circuit faults,
 		such as those caused by broken thermocouple wires.
 		Reading returns either '1' or '0'.
-		'1' = An open circuit such as broken thermocouple wires
-		      has been detected.
-		'0' = No open circuit or broken thermocouple wires are detected
+
+		===  =======================================================
+		'1'  An open circuit such as broken thermocouple wires
+		     has been detected.
+		'0'  No open circuit or broken thermocouple wires are detected
+		===  =======================================================
 
 What:		/sys/bus/iio/devices/iio:deviceX/fault_ovuv
 KernelVersion:	5.1
@@ -18,7 +21,11 @@ Description:
 		cables by integrated MOSFETs at the T+ and T- inputs, and the
 		BIAS output. These MOSFETs turn off when the input voltage is
 		negative or greater than VDD.
+
 		Reading returns either '1' or '0'.
-		'1' = The input voltage is negative or greater than VDD.
-		'0' = The input voltage is positive and less than VDD (normal
-		state).
+
+		===  =======================================================
+		'1'  The input voltage is negative or greater than VDD.
+		'0'  The input voltage is positive and less than VDD (normal
+		     state).
+		===  =======================================================

Documentation/ABI/testing/sysfs-bus-iio-timer-stm32

@@ -3,67 +3,85 @@ KernelVersion:	4.11
 Contact:	benjamin.gaignard@st.com
 Description:
 		Reading returns the list possible master modes which are:
-		- "reset"     :	The UG bit from the TIMx_EGR register is
+
+
+		- "reset"
+				The UG bit from the TIMx_EGR register is
 				used as trigger output (TRGO).
-		- "enable"    : The Counter Enable signal CNT_EN is used
+		- "enable"
+				The Counter Enable signal CNT_EN is used
 				as trigger output.
-		- "update"    : The update event is selected as trigger output.
+		- "update"
+				The update event is selected as trigger output.
 				For instance a master timer can then be used
 				as a prescaler for a slave timer.
-		- "compare_pulse" : The trigger output send a positive pulse
-				    when the CC1IF flag is to be set.
-		- "OC1REF"    : OC1REF signal is used as trigger output.
-		- "OC2REF"    : OC2REF signal is used as trigger output.
-		- "OC3REF"    : OC3REF signal is used as trigger output.
-		- "OC4REF"    : OC4REF signal is used as trigger output.
+		- "compare_pulse"
+				The trigger output send a positive pulse
+				when the CC1IF flag is to be set.
+		- "OC1REF"
+				OC1REF signal is used as trigger output.
+		- "OC2REF"
+				OC2REF signal is used as trigger output.
+		- "OC3REF"
+				OC3REF signal is used as trigger output.
+		- "OC4REF"
+				OC4REF signal is used as trigger output.
+
 		Additional modes (on TRGO2 only):
-		- "OC5REF"    : OC5REF signal is used as trigger output.
-		- "OC6REF"    : OC6REF signal is used as trigger output.
+
+		- "OC5REF"
+				OC5REF signal is used as trigger output.
+		- "OC6REF"
+				OC6REF signal is used as trigger output.
 		- "compare_pulse_OC4REF":
-		  OC4REF rising or falling edges generate pulses.
+				OC4REF rising or falling edges generate pulses.
 		- "compare_pulse_OC6REF":
-		  OC6REF rising or falling edges generate pulses.
+				OC6REF rising or falling edges generate pulses.
 		- "compare_pulse_OC4REF_r_or_OC6REF_r":
-		  OC4REF or OC6REF rising edges generate pulses.
+				OC4REF or OC6REF rising edges generate pulses.
 		- "compare_pulse_OC4REF_r_or_OC6REF_f":
-		  OC4REF rising or OC6REF falling edges generate pulses.
+				OC4REF rising or OC6REF falling edges generate
+				pulses.
 		- "compare_pulse_OC5REF_r_or_OC6REF_r":
-		  OC5REF or OC6REF rising edges generate pulses.
+				OC5REF or OC6REF rising edges generate pulses.
 		- "compare_pulse_OC5REF_r_or_OC6REF_f":
-		  OC5REF rising or OC6REF falling edges generate pulses.
-
-		+-----------+   +-------------+            +---------+
-		| Prescaler +-> | Counter     |        +-> | Master  | TRGO(2)
-		+-----------+   +--+--------+-+        |-> | Control +-->
-		                   |        |          ||  +---------+
-		                +--v--------+-+ OCxREF ||  +---------+
-		                | Chx compare +----------> | Output  | ChX
-		                +-----------+-+         |  | Control +-->
-		                      .     |           |  +---------+
-		                      .     |           |    .
-		                +-----------v-+ OC6REF  |    .
-		                | Ch6 compare +---------+>
-		                +-------------+
-
-		Example with: "compare_pulse_OC4REF_r_or_OC6REF_r":
-
-		                X
-		              X   X
-		            X .   . X
-		          X   .   .   X
-		        X     .   .     X
-		count X .     .   .     . X
-		        .     .   .     .
-		        .     .   .     .
-		        +---------------+
-		OC4REF  |     .   .     |
-		      +-+     .   .     +-+
-		        .     +---+     .
-		OC6REF  .     |   |     .
-		      +-------+   +-------+
-		        +-+   +-+
-		TRGO2   | |   | |
-		      +-+ +---+ +---------+
+				OC5REF rising or OC6REF falling edges generate
+				pulses.
+
+		::
+
+		  +-----------+   +-------------+            +---------+
+		  | Prescaler +-> | Counter     |        +-> | Master  | TRGO(2)
+		  +-----------+   +--+--------+-+        |-> | Control +-->
+		                     |        |          ||  +---------+
+		                  +--v--------+-+ OCxREF ||  +---------+
+		                  | Chx compare +----------> | Output  | ChX
+		                  +-----------+-+         |  | Control +-->
+		                        .     |           |  +---------+
+		                        .     |           |    .
+		                  +-----------v-+ OC6REF  |    .
+		                  | Ch6 compare +---------+>
+		                  +-------------+
+
+		Example with: "compare_pulse_OC4REF_r_or_OC6REF_r"::
+
+		                  X
+		                X   X
+		              X .   . X
+		            X   .   .   X
+		          X     .   .     X
+		  count X .     .   .     . X
+		          .     .   .     .
+		          .     .   .     .
+		          +---------------+
+		  OC4REF  |     .   .     |
+		        +-+     .   .     +-+
+		          .     +---+     .
+		  OC6REF  .     |   |     .
+		        +-------+   +-------+
+		          +-+   +-+
+		  TRGO2   | |   | |
+		        +-+ +---+ +---------+
 
 What:		/sys/bus/iio/devices/triggerX/master_mode
 KernelVersion:	4.11
@@ -91,6 +109,30 @@ Description:
 		When counting down the counter start from preset value
 		and fire event when reach 0.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the list possible quadrature modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
+KernelVersion:	4.12
+Contact:	benjamin.gaignard@st.com
+Description:
+		Configure the device counter quadrature modes:
+
+		channel_A:
+			Encoder A input servers as the count input and B as
+			the UP/DOWN direction control input.
+
+		channel_B:
+			Encoder B input serves as the count input and A as
+			the UP/DOWN direction control input.
+
+		quadrature:
+			Encoder A and B inputs are mixed to get direction
+			and count with a scale of 0.25.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
 KernelVersion:	4.12
 Contact:	benjamin.gaignard@st.com
@@ -104,6 +146,7 @@ Description:
 		Configure the device counter enable modes, in all case
 		counting direction is set by in_count0_count_direction
 		attribute and the counter is clocked by the internal clock.
+
 		always:
 			Counter is always ON.
 

Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth

@@ -10,10 +10,13 @@ Date:		June 2015
 KernelVersion:	4.3
 Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
 Description:	(RO) Output port type:
-		  0: not present,
-		  1: MSU (Memory Storage Unit)
-		  2: CTP (Common Trace Port)
-		  4: PTI (MIPI PTI).
+
+		 ==  =========================
+		  0  not present,
+		  1  MSU (Memory Storage Unit)
+		  2  CTP (Common Trace Port)
+		  4  PTI (MIPI PTI).
+		 ==  =========================
 
 What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_drop
 Date:		June 2015

Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc

@@ -9,11 +9,13 @@ Date:		June 2015
 KernelVersion:	4.3
 Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
 Description:	(RW) Configure MSC operating mode:
+
 		  - "single", for contiguous buffer mode (high-order alloc);
 		  - "multi", for multiblock mode;
 		  - "ExI", for DCI handler mode;
 		  - "debug", for debug mode;
 		  - any of the currently loaded buffer sinks.
+
 		If operating mode changes, existing buffer is deallocated,
 		provided there are no active users and tracing is not enabled,
 		otherwise the write will fail.
@@ -23,10 +25,12 @@ Date:		June 2015
 KernelVersion:	4.3
 Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
 Description:	(RW) Configure MSC buffer size for "single" or "multi" modes.
+
 		In single mode, this is a single number of pages, has to be
 		power of 2. In multiblock mode, this is a comma-separated list
 		of numbers of pages for each window to be allocated. Number of
 		windows is not limited.
+
 		Writing to this file deallocates existing buffer (provided
 		there are no active users and tracing is not enabled) and then
 		allocates a new one.

Documentation/ABI/testing/sysfs-bus-most

@@ -235,7 +235,8 @@ KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
 		This is to read back the configured direction of the channel.
-		The following strings will be accepted:
+		The following strings will be accepted::
+
 			'tx',
 			'rx'
 Users:
@@ -246,7 +247,8 @@ KernelVersion:	4.15
 Contact:	Christian Gromm <christian.gromm@microchip.com>
 Description:
 		This is to read back the configured data type of the channel.
-		The following strings will be accepted:
+		The following strings will be accepted::
+
 			'control',
 			'async',
 			'sync',