fas216: switch to ->show_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

drivers/scsi/arm/arxescsi.c

@@ -220,47 +220,21 @@ static const char *arxescsi_info(struct Scsi_Host *host)
 	return string;
 }
 
-/*
- * Function: int arxescsi_proc_info(char *buffer, char **start, off_t offset,
- *					 int length, int host_no, int inout)
- * Purpose : Return information about the driver to a user process accessing
- *	     the /proc filesystem.
- * Params  : buffer - a buffer to write information to
- *	     start  - a pointer into this buffer set by this routine to the start
- *		      of the required information.
- *	     offset - offset into information that we have read up to.
- *	     length - length of buffer
- *	     host_no - host number to return information for
- *	     inout  - 0 for reading, 1 for writing.
- * Returns : length of data written to buffer.
- */
 static int
-arxescsi_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length,
-		   int inout)
+arxescsi_show_info(struct seq_file *m, struct Scsi_Host *host)
 {
 	struct arxescsi_info *info;
-	char *p = buffer;
-	int pos;
-
 	info = (struct arxescsi_info *)host->hostdata;
-	if (inout == 1)
-		return -EINVAL;
-
-	p += sprintf(p, "ARXE 16-bit SCSI driver v%s\n", VERSION);
-	p += fas216_print_host(&info->info, p);
-	p += fas216_print_stats(&info->info, p);
-	p += fas216_print_devices(&info->info, p);
-
-	*start = buffer + offset;
-	pos = p - buffer - offset;
-	if (pos > length)
-		pos = length;
 
-	return pos;
+	seq_printf(m, "ARXE 16-bit SCSI driver v%s\n", VERSION);
+	fas216_print_host(&info->info, m);
+	fas216_print_stats(&info->info, m);
+	fas216_print_devices(&info->info, m);
+	return 0;
 }
 
 static struct scsi_host_template arxescsi_template = {
-	.proc_info			= arxescsi_proc_info,
+	.show_info			= arxescsi_show_info,
 	.name				= "ARXE SCSI card",
 	.info				= arxescsi_info,
 	.queuecommand			= fas216_noqueue_command,

drivers/scsi/arm/cumana_2.c

@@ -337,50 +337,25 @@ cumanascsi_2_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
 	return ret;
 }
 
-/* Prototype: int cumanascsi_2_proc_info(char *buffer, char **start, off_t offset,
- *					 int length, int host_no, int inout)
- * Purpose  : Return information about the driver to a user process accessing
- *	      the /proc filesystem.
- * Params   : buffer - a buffer to write information to
- *	      start  - a pointer into this buffer set by this routine to the start
- *		       of the required information.
- *	      offset - offset into information that we have read up to.
- *	      length - length of buffer
- *	      host_no - host number to return information for
- *	      inout  - 0 for reading, 1 for writing.
- * Returns  : length of data written to buffer.
- */
-int cumanascsi_2_proc_info (struct Scsi_Host *host, char *buffer, char **start, off_t offset,
-			    int length, int inout)
+static int cumanascsi_2_show_info(struct seq_file *m, struct Scsi_Host *host)
 {
 	struct cumanascsi2_info *info;
-	char *p = buffer;
-	int pos;
-
-	if (inout == 1)
-		return cumanascsi_2_set_proc_info(host, buffer, length);
-
 	info = (struct cumanascsi2_info *)host->hostdata;
 
-	p += sprintf(p, "Cumana SCSI II driver v%s\n", VERSION);
-	p += fas216_print_host(&info->info, p);
-	p += sprintf(p, "Term    : o%s\n",
+	seq_printf(m, "Cumana SCSI II driver v%s\n", VERSION);
+	fas216_print_host(&info->info, m);
+	seq_printf(m, "Term    : o%s\n",
 			info->terms ? "n" : "ff");
 
-	p += fas216_print_stats(&info->info, p);
-	p += fas216_print_devices(&info->info, p);
-
-	*start = buffer + offset;
-	pos = p - buffer - offset;
-	if (pos > length)
-		pos = length;
-
-	return pos;
+	fas216_print_stats(&info->info, m);
+	fas216_print_devices(&info->info, m);
+	return 0;
 }
 
 static struct scsi_host_template cumanascsi2_template = {
 	.module				= THIS_MODULE,
-	.proc_info			= cumanascsi_2_proc_info,
+	.show_info			= cumanascsi_2_show_info,
+	.write_info			= cumanascsi_2_set_proc_info,
 	.name				= "Cumana SCSI II",
 	.info				= cumanascsi_2_info,
 	.queuecommand			= fas216_queue_command,

drivers/scsi/arm/eesox.c

@@ -422,45 +422,20 @@ eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
 	return ret;
 }
 
-/* Prototype: int eesoxscsi_proc_info(char *buffer, char **start, off_t offset,
- *				      int length, int host_no, int inout)
- * Purpose  : Return information about the driver to a user process accessing
- *	      the /proc filesystem.
- * Params   : buffer - a buffer to write information to
- *	      start  - a pointer into this buffer set by this routine to the start
- *		       of the required information.
- *	      offset - offset into information that we have read up to.
- *	      length - length of buffer
- *	      host_no - host number to return information for
- *	      inout  - 0 for reading, 1 for writing.
- * Returns  : length of data written to buffer.
- */
-int eesoxscsi_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
-			    int length, int inout)
+static int eesoxscsi_show_info(struct seq_file *m, struct Scsi_Host *host)
 {
 	struct eesoxscsi_info *info;
-	char *p = buffer;
-	int pos;
-
-	if (inout == 1)
-		return eesoxscsi_set_proc_info(host, buffer, length);
 
 	info = (struct eesoxscsi_info *)host->hostdata;
 
-	p += sprintf(p, "EESOX SCSI driver v%s\n", VERSION);
-	p += fas216_print_host(&info->info, p);
-	p += sprintf(p, "Term    : o%s\n",
+	seq_printf(m, "EESOX SCSI driver v%s\n", VERSION);
+	fas216_print_host(&info->info, m);
+	seq_printf(m, "Term    : o%s\n",
 			info->control & EESOX_TERM_ENABLE ? "n" : "ff");
 
-	p += fas216_print_stats(&info->info, p);
-	p += fas216_print_devices(&info->info, p);
-
-	*start = buffer + offset;
-	pos = p - buffer - offset;
-	if (pos > length)
-		pos = length;
-
-	return pos;
+	fas216_print_stats(&info->info, m);
+	fas216_print_devices(&info->info, m);
+	return 0;
 }
 
 static ssize_t eesoxscsi_show_term(struct device *dev, struct device_attribute *attr, char *buf)
@@ -498,7 +473,8 @@ static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR,
 
 static struct scsi_host_template eesox_template = {
 	.module				= THIS_MODULE,
-	.proc_info			= eesoxscsi_proc_info,
+	.show_info			= eesoxscsi_show_info,
+	.write_info			= eesoxscsi_set_proc_info,
 	.name				= "EESOX SCSI",
 	.info				= eesoxscsi_info,
 	.queuecommand			= fas216_queue_command,

drivers/scsi/arm/fas216.c

@@ -2958,9 +2958,9 @@ void fas216_release(struct Scsi_Host *host)
 	queue_free(&info->queues.issue);
 }
 
-int fas216_print_host(FAS216_Info *info, char *buffer)
+void fas216_print_host(FAS216_Info *info, struct seq_file *m)
 {
-	return sprintf(buffer,
+	seq_printf(m,
 			"\n"
 			"Chip    : %s\n"
 			" Address: 0x%p\n"
@@ -2970,11 +2970,9 @@ int fas216_print_host(FAS216_Info *info, char *buffer)
 			info->scsi.irq, info->scsi.dma);
 }
 
-int fas216_print_stats(FAS216_Info *info, char *buffer)
+void fas216_print_stats(FAS216_Info *info, struct seq_file *m)
 {
-	char *p = buffer;
-
-	p += sprintf(p, "\n"
+	seq_printf(m, "\n"
 			"Command Statistics:\n"
 			" Queued     : %u\n"
 			" Issued     : %u\n"
@@ -2991,38 +2989,33 @@ int fas216_print_stats(FAS216_Info *info, char *buffer)
 			info->stats.writes,	 info->stats.miscs,
 			info->stats.disconnects, info->stats.aborts,
 			info->stats.bus_resets,	 info->stats.host_resets);
-
-	return p - buffer;
 }
 
-int fas216_print_devices(FAS216_Info *info, char *buffer)
+void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
 {
 	struct fas216_device *dev;
 	struct scsi_device *scd;
-	char *p = buffer;
 
-	p += sprintf(p, "Device/Lun TaggedQ       Parity   Sync\n");
+	seq_printf(m, "Device/Lun TaggedQ       Parity   Sync\n");
 
 	shost_for_each_device(scd, info->host) {
 		dev = &info->device[scd->id];
-		p += sprintf(p, "     %d/%d   ", scd->id, scd->lun);
+		seq_printf(m, "     %d/%d   ", scd->id, scd->lun);
 		if (scd->tagged_supported)
-			p += sprintf(p, "%3sabled(%3d) ",
+			seq_printf(m, "%3sabled(%3d) ",
 				     scd->simple_tags ? "en" : "dis",
 				     scd->current_tag);
 		else
-			p += sprintf(p, "unsupported   ");
+			seq_printf(m, "unsupported   ");
 
-		p += sprintf(p, "%3sabled ", dev->parity_enabled ? "en" : "dis");
+		seq_printf(m, "%3sabled ", dev->parity_enabled ? "en" : "dis");
 
 		if (dev->sof)
-			p += sprintf(p, "offset %d, %d ns\n",
+			seq_printf(m, "offset %d, %d ns\n",
 				     dev->sof, dev->period * 4);
 		else
-			p += sprintf(p, "async\n");
+			seq_printf(m, "async\n");
 	}
-
-	return p - buffer;
 }
 
 EXPORT_SYMBOL(fas216_init);

drivers/scsi/arm/fas216.h

@@ -358,9 +358,9 @@ extern void fas216_remove (struct Scsi_Host *instance);
  */
 extern void fas216_release (struct Scsi_Host *instance);
 
-extern int fas216_print_host(FAS216_Info *info, char *buffer);
-extern int fas216_print_stats(FAS216_Info *info, char *buffer);
-extern int fas216_print_devices(FAS216_Info *info, char *buffer);
+extern void fas216_print_host(FAS216_Info *info, struct seq_file *m);
+extern void fas216_print_stats(FAS216_Info *info, struct seq_file *m);
+extern void fas216_print_devices(FAS216_Info *info, struct seq_file *m);
 
 /* Function: int fas216_eh_abort(struct scsi_cmnd *SCpnt)
  * Purpose : abort this command

drivers/scsi/arm/powertec.c

@@ -237,32 +237,20 @@ powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
  *	      inout   - 0 for reading, 1 for writing.
  * Returns  : length of data written to buffer.
  */
-int powertecscsi_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
-			    int length, int inout)
+static int powertecscsi_show_info(struct seq_file *m, struct Scsi_Host *host)
 {
 	struct powertec_info *info;
-	char *p = buffer;
-	int pos;
-
-	if (inout == 1)
-		return powertecscsi_set_proc_info(host, buffer, length);
 
 	info = (struct powertec_info *)host->hostdata;
 
-	p += sprintf(p, "PowerTec SCSI driver v%s\n", VERSION);
-	p += fas216_print_host(&info->info, p);
-	p += sprintf(p, "Term    : o%s\n",
+	seq_printf(m, "PowerTec SCSI driver v%s\n", VERSION);
+	fas216_print_host(&info->info, m);
+	seq_printf(m, "Term    : o%s\n",
 			info->term_ctl ? "n" : "ff");
 
-	p += fas216_print_stats(&info->info, p);
-	p += fas216_print_devices(&info->info, p);
-
-	*start = buffer + offset;
-	pos = p - buffer - offset;
-	if (pos > length)
-		pos = length;
-
-	return pos;
+	fas216_print_stats(&info->info, m);
+	fas216_print_devices(&info->info, m);
+	return 0;
 }
 
 static ssize_t powertecscsi_show_term(struct device *dev, struct device_attribute *attr, char *buf)
@@ -291,7 +279,8 @@ static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR,
 
 static struct scsi_host_template powertecscsi_template = {
 	.module				= THIS_MODULE,
-	.proc_info			= powertecscsi_proc_info,
+	.show_info			= powertecscsi_show_info,
+	.write_info			= powertecscsi_set_proc_info,
 	.name				= "PowerTec SCSI",
 	.info				= powertecscsi_info,
 	.queuecommand			= fas216_queue_command,