media: saa7134: fix terminology around saa7134_i2c_eeprom_md7134_gate()

saa7134_i2c_eeprom_md7134_gate() function and the associated comment uses
an inverted i2c gate open / closed terminology.
Let's fix this.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix alignment checkpatch warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/pci/saa7134/saa7134-i2c.c

@@ -342,7 +342,11 @@ static const struct i2c_client saa7134_client_template = {
 
 /* ----------------------------------------------------------- */
 
-/* On Medion 7134 reading EEPROM needs DVB-T demod i2c gate open */
+/*
+ * On Medion 7134 reading the SAA7134 chip config EEPROM needs DVB-T
+ * demod i2c gate closed due to an address clash between this EEPROM
+ * and the demod one.
+ */
 static void saa7134_i2c_eeprom_md7134_gate(struct saa7134_dev *dev)
 {
 	u8 subaddr = 0x7, dmdregval;
@@ -359,14 +363,14 @@ static void saa7134_i2c_eeprom_md7134_gate(struct saa7134_dev *dev)
 
 	ret = i2c_transfer(&dev->i2c_adap, i2cgatemsg_r, 2);
 	if ((ret == 2) && (dmdregval & 0x2)) {
-		pr_debug("%s: DVB-T demod i2c gate was left closed\n",
+		pr_debug("%s: DVB-T demod i2c gate was left open\n",
 			 dev->name);
 
 		data[0] = subaddr;
 		data[1] = (dmdregval & ~0x2);
 		if (i2c_transfer(&dev->i2c_adap, i2cgatemsg_w, 1) != 1)
-			pr_err("%s: EEPROM i2c gate open failure\n",
-			  dev->name);
+			pr_err("%s: EEPROM i2c gate close failure\n",
+			       dev->name);
 	}
 }