Commit 9d823351 authored by Rahul Tanwar's avatar Rahul Tanwar Committed by Guenter Roeck

hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller

PVT controller (MR75203) is used to configure & control
Moortec embedded analog IP which contains temprature
sensor(TS), voltage monitor(VM) & process detector(PD)
modules. Add hardware monitoring driver to support
MR75203 PVT controller.
Signed-off-by: default avatarRahul Tanwar <rahul.tanwar@linux.intel.com>
Reviewed-by: default avatarGuenter Roeck <linux@roeck-us.net>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/05b59cd860d2a1aa0a68ab300829efe709645184.1601889876.git.rahul.tanwar@linux.intel.comSigned-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent 748022ef
...@@ -1112,6 +1112,16 @@ config SENSORS_MENF21BMC_HWMON ...@@ -1112,6 +1112,16 @@ config SENSORS_MENF21BMC_HWMON
This driver can also be built as a module. If so the module This driver can also be built as a module. If so the module
will be called menf21bmc_hwmon. will be called menf21bmc_hwmon.
config SENSORS_MR75203
tristate "Moortec Semiconductor MR75203 PVT Controller"
select REGMAP_MMIO
help
If you say yes here you get support for Moortec MR75203
PVT controller.
This driver can also be built as a module. If so, the module
will be called mr75203.
config SENSORS_ADCXX config SENSORS_ADCXX
tristate "National Semiconductor ADCxxxSxxx" tristate "National Semiconductor ADCxxxSxxx"
depends on SPI_MASTER depends on SPI_MASTER
......
...@@ -143,6 +143,7 @@ obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o ...@@ -143,6 +143,7 @@ obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o
obj-$(CONFIG_SENSORS_TC654) += tc654.o obj-$(CONFIG_SENSORS_TC654) += tc654.o
obj-$(CONFIG_SENSORS_MLXREG_FAN) += mlxreg-fan.o obj-$(CONFIG_SENSORS_MLXREG_FAN) += mlxreg-fan.o
obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
obj-$(CONFIG_SENSORS_MR75203) += mr75203.o
obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o
obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment