Commit 9d9740f0 authored by Paulo Zanoni's avatar Paulo Zanoni Committed by Daniel Vetter

drm/i915: add some barriers when changing DIPs

On IVB and older, we basically have two registers: the control and the
data register. We write a few consecutitve times to the control
register, and we need these writes to arrive exactly in the specified
order.

Also, when we're changing the data register, we need to guarantee that
anything written to the control register already arrived (since
changing the control register can change where the data register
points to). Also, we need to make sure all the writes to the data
register happen exactly in the specified order, and we also *can't*
read the data register during this process, since reading and/or
writing it will change the place it points to.

So invoke the "better safe than sorry" rule and just be careful and
put barriers everywhere :)

On HSW we still have a control register that we write many times, but
we have many data registers.
Demanded-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent c30b6110
......@@ -133,16 +133,19 @@ static void g4x_write_infoframe(struct drm_encoder *encoder,
I915_WRITE(VIDEO_DIP_CTL, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(VIDEO_DIP_DATA, *data);
data++;
}
mmiowb();
val |= g4x_infoframe_enable(frame);
val &= ~VIDEO_DIP_FREQ_MASK;
val |= VIDEO_DIP_FREQ_VSYNC;
I915_WRITE(VIDEO_DIP_CTL, val);
POSTING_READ(VIDEO_DIP_CTL);
}
static void ibx_write_infoframe(struct drm_encoder *encoder,
......@@ -165,16 +168,19 @@ static void ibx_write_infoframe(struct drm_encoder *encoder,
I915_WRITE(reg, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
data++;
}
mmiowb();
val |= g4x_infoframe_enable(frame);
val &= ~VIDEO_DIP_FREQ_MASK;
val |= VIDEO_DIP_FREQ_VSYNC;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
static void cpt_write_infoframe(struct drm_encoder *encoder,
......@@ -200,16 +206,19 @@ static void cpt_write_infoframe(struct drm_encoder *encoder,
I915_WRITE(reg, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
data++;
}
mmiowb();
val |= g4x_infoframe_enable(frame);
val &= ~VIDEO_DIP_FREQ_MASK;
val |= VIDEO_DIP_FREQ_VSYNC;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
static void vlv_write_infoframe(struct drm_encoder *encoder,
......@@ -232,16 +241,19 @@ static void vlv_write_infoframe(struct drm_encoder *encoder,
I915_WRITE(reg, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(VLV_TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
data++;
}
mmiowb();
val |= g4x_infoframe_enable(frame);
val &= ~VIDEO_DIP_FREQ_MASK;
val |= VIDEO_DIP_FREQ_VSYNC;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
static void hsw_write_infoframe(struct drm_encoder *encoder,
......@@ -262,13 +274,16 @@ static void hsw_write_infoframe(struct drm_encoder *encoder,
val &= ~hsw_infoframe_enable(frame);
I915_WRITE(ctl_reg, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(data_reg + i, *data);
data++;
}
mmiowb();
val |= hsw_infoframe_enable(frame);
I915_WRITE(ctl_reg, val);
POSTING_READ(ctl_reg);
}
static void intel_set_infoframe(struct drm_encoder *encoder,
......@@ -335,6 +350,7 @@ static void g4x_set_infoframes(struct drm_encoder *encoder,
return;
val &= ~VIDEO_DIP_ENABLE;
I915_WRITE(reg, val);
POSTING_READ(reg);
return;
}
......@@ -353,6 +369,7 @@ static void g4x_set_infoframes(struct drm_encoder *encoder,
if (val & VIDEO_DIP_ENABLE) {
val &= ~VIDEO_DIP_ENABLE;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
val &= ~VIDEO_DIP_PORT_MASK;
val |= port;
......@@ -362,6 +379,7 @@ static void g4x_set_infoframes(struct drm_encoder *encoder,
val &= ~VIDEO_DIP_ENABLE_VENDOR;
I915_WRITE(reg, val);
POSTING_READ(reg);
intel_hdmi_set_avi_infoframe(encoder, adjusted_mode);
intel_hdmi_set_spd_infoframe(encoder);
......@@ -385,6 +403,7 @@ static void ibx_set_infoframes(struct drm_encoder *encoder,
return;
val &= ~VIDEO_DIP_ENABLE;
I915_WRITE(reg, val);
POSTING_READ(reg);
return;
}
......@@ -406,6 +425,7 @@ static void ibx_set_infoframes(struct drm_encoder *encoder,
if (val & VIDEO_DIP_ENABLE) {
val &= ~VIDEO_DIP_ENABLE;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
val &= ~VIDEO_DIP_PORT_MASK;
val |= port;
......@@ -416,6 +436,7 @@ static void ibx_set_infoframes(struct drm_encoder *encoder,
VIDEO_DIP_ENABLE_GCP);
I915_WRITE(reg, val);
POSTING_READ(reg);
intel_hdmi_set_avi_infoframe(encoder, adjusted_mode);
intel_hdmi_set_spd_infoframe(encoder);
......@@ -438,6 +459,7 @@ static void cpt_set_infoframes(struct drm_encoder *encoder,
return;
val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI);
I915_WRITE(reg, val);
POSTING_READ(reg);
return;
}
......@@ -447,6 +469,7 @@ static void cpt_set_infoframes(struct drm_encoder *encoder,
VIDEO_DIP_ENABLE_GCP);
I915_WRITE(reg, val);
POSTING_READ(reg);
intel_hdmi_set_avi_infoframe(encoder, adjusted_mode);
intel_hdmi_set_spd_infoframe(encoder);
......@@ -469,6 +492,7 @@ static void vlv_set_infoframes(struct drm_encoder *encoder,
return;
val &= ~VIDEO_DIP_ENABLE;
I915_WRITE(reg, val);
POSTING_READ(reg);
return;
}
......@@ -477,6 +501,7 @@ static void vlv_set_infoframes(struct drm_encoder *encoder,
VIDEO_DIP_ENABLE_GCP);
I915_WRITE(reg, val);
POSTING_READ(reg);
intel_hdmi_set_avi_infoframe(encoder, adjusted_mode);
intel_hdmi_set_spd_infoframe(encoder);
......@@ -493,6 +518,7 @@ static void hsw_set_infoframes(struct drm_encoder *encoder,
if (!intel_hdmi->has_hdmi_sink) {
I915_WRITE(reg, 0);
POSTING_READ(reg);
return;
}
......@@ -500,6 +526,7 @@ static void hsw_set_infoframes(struct drm_encoder *encoder,
VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW);
I915_WRITE(reg, val);
POSTING_READ(reg);
intel_hdmi_set_avi_infoframe(encoder, adjusted_mode);
intel_hdmi_set_spd_infoframe(encoder);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment