Commit 9e5edc82 authored by Shawn Guo's avatar Shawn Guo Committed by Shawn Guo

arm64: dts: zx296718: add pinctrl and gpio devices

It adds pinctrl and gpio devices for zx296718 SoC support.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 391752fb
......@@ -53,6 +53,13 @@ / {
interrupt-parent = <&gic>;
aliases {
gpio0 = &bgpio0;
gpio1 = &bgpio1;
gpio2 = &bgpio2;
gpio3 = &bgpio3;
gpio4 = &bgpio4;
gpio5 = &bgpio5;
gpio6 = &bgpio6;
serial0 = &uart0;
};
......@@ -288,6 +295,11 @@ aon_sysctrl: aon-sysctrl@116000 {
reg = <0x116000 0x1000>;
};
iocfg: pin-controller@119000 {
compatible = "zte,zx296718-iocfg";
reg = <0x119000 0x1000>;
};
uart0: uart@11f000 {
compatible = "arm,pl011", "arm,primecell";
arm,primecell-periphid = <0x001feffe>;
......@@ -358,6 +370,93 @@ lsp0crm: clock-controller@1420000 {
#clock-cells = <1>;
};
bgpio0: gpio@142d000 {
compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
reg = <0x142d000 0x40>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmm 0 48 16>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
};
bgpio1: gpio@142d040 {
compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
reg = <0x142d040 0x40>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmm 0 80 16>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
};
bgpio2: gpio@142d080 {
compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
reg = <0x142d080 0x40>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmm 0 80 3
&pmm 3 32 4
&pmm 7 83 9>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
};
bgpio3: gpio@142d0c0 {
compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
reg = <0x142d0c0 0x40>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmm 0 92 16>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
};
bgpio4: gpio@142d100 {
compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
reg = <0x142d100 0x40>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmm 0 108 12
&pmm 12 121 4>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
};
bgpio5: gpio@142d140 {
compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
reg = <0x142d140 0x40>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmm 0 125 16>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
};
bgpio6: gpio@142d180 {
compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
reg = <0x142d180 0x40>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmm 0 141 2>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
};
lsp1crm: clock-controller@1430000 {
compatible = "zte,zx296718-lsp1crm";
reg = <0x01430000 0x1000>;
......@@ -421,6 +520,12 @@ topcrm: clock-controller@1461000 {
#clock-cells = <1>;
};
pmm: pin-controller@1462000 {
compatible = "zte,zx296718-pmm";
reg = <0x1462000 0x1000>;
zte,auxiliary-controller = <&iocfg>;
};
sysctrl: sysctrl@1463000 {
compatible = "zte,zx296718-sysctrl", "syscon";
reg = <0x1463000 0x1000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment