Commit 9eba6125 authored by Bruno Randolf's avatar Bruno Randolf Committed by John W. Linville

mac80211: Add WME information element for IBSS

Enable WME QoS in IBSS mode by adding a WME information element to beacons and
probe respones and by checking for it and marking stations as WME capable if it
is present.
Signed-off-by: default avatarBruno Randolf <br1@einfach.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent b34793ee
......@@ -173,6 +173,19 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
memcpy(skb_put(skb, ifibss->ie_len),
ifibss->ie, ifibss->ie_len);
if (local->hw.queues >= 4) {
pos = skb_put(skb, 9);
*pos++ = WLAN_EID_VENDOR_SPECIFIC;
*pos++ = 7; /* len */
*pos++ = 0x00; /* Microsoft OUI 00:50:F2 */
*pos++ = 0x50;
*pos++ = 0xf2;
*pos++ = 2; /* WME */
*pos++ = 0; /* WME info */
*pos++ = 1; /* WME ver */
*pos++ = 0; /* U-APSD no in use */
}
rcu_assign_pointer(ifibss->presp, skb);
sdata->vif.bss_conf.beacon_int = beacon_int;
......@@ -266,37 +279,45 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
return;
if (sdata->vif.type == NL80211_IFTYPE_ADHOC && elems->supp_rates &&
if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
memcmp(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN) == 0) {
supp_rates = ieee80211_sta_get_rates(local, elems, band);
rcu_read_lock();
sta = sta_info_get(sdata, mgmt->sa);
if (sta) {
u32 prev_rates;
prev_rates = sta->sta.supp_rates[band];
/* make sure mandatory rates are always added */
sta->sta.supp_rates[band] = supp_rates |
ieee80211_mandatory_rates(local, band);
if (elems->supp_rates) {
supp_rates = ieee80211_sta_get_rates(local, elems,
band);
if (sta) {
u32 prev_rates;
if (sta->sta.supp_rates[band] != prev_rates) {
prev_rates = sta->sta.supp_rates[band];
/* make sure mandatory rates are always added */
sta->sta.supp_rates[band] = supp_rates |
ieee80211_mandatory_rates(local, band);
if (sta->sta.supp_rates[band] != prev_rates) {
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: updated supp_rates set "
"for %pM based on beacon/probe_response "
"(0x%x -> 0x%x)\n",
sdata->name, sta->sta.addr,
prev_rates, sta->sta.supp_rates[band]);
printk(KERN_DEBUG
"%s: updated supp_rates set "
"for %pM based on beacon"
"/probe_resp (0x%x -> 0x%x)\n",
sdata->name, sta->sta.addr,
prev_rates,
sta->sta.supp_rates[band]);
#endif
rate_control_rate_init(sta);
}
rcu_read_unlock();
} else {
rcu_read_unlock();
ieee80211_ibss_add_sta(sdata, mgmt->bssid, mgmt->sa,
supp_rates, GFP_KERNEL);
rate_control_rate_init(sta);
}
} else
sta = ieee80211_ibss_add_sta(sdata, mgmt->bssid,
mgmt->sa, supp_rates,
GFP_ATOMIC);
}
if (sta && elems->wmm_info)
set_sta_flags(sta, WLAN_STA_WME);
rcu_read_unlock();
}
bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment