Skip to content

L
linux
Commit 9eff794b authored by Michael Hennerich's avatar Michael Hennerich Committed by Dmitry Torokhov
Browse files
Options

Input: ad714x - read the interrupt status registers in a row 

The interrupt status registers should be read in row to avoid invalid data.

Alter "read" method for both bus options to allow reading several registers
in a row and make sure we read interrupt status registers properly.

Read sequence saves 50% of bus transactions compared to single register
reads. So use it also for the result registers, which are also located
in a row.

Also update copyright notice.
Signed-off-by: default avatarMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent c0409feb
Hide whitespace changes
Inline Side-by-side
Showing with 49 additions and 41 deletions
drivers/input/misc/ad714x-i2c.c
View file @ 9eff794b
/*
* AD714X CapTouch Programmable Controller driver (I2C bus)
*
* Copyright 2009 Analog Devices Inc.
* Copyright 2009-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
......@@ -47,9 +47,10 @@ static int ad714x_i2c_write(struct ad714x_chip *chip,
}
static int ad714x_i2c_read(struct ad714x_chip *chip,
unsigned short reg, unsigned short *data)
unsigned short reg, unsigned short *data, size_t len)
{
struct i2c_client *client = to_i2c_client(chip->dev);
int i;
int error;
chip->xfer_buf[0] = cpu_to_be16(reg);
......@@ -58,14 +59,16 @@ static int ad714x_i2c_read(struct ad714x_chip *chip,
sizeof(*chip->xfer_buf));
if (error >= 0)
error = i2c_master_recv(client, (u8 *)chip->xfer_buf,
sizeof(*chip->xfer_buf));
len * sizeof(*chip->xfer_buf));
if (unlikely(error < 0)) {
dev_err(&client->dev, "I2C read error: %d\n", error);
return error;
}
*data = be16_to_cpup(chip->xfer_buf);
for (i = 0; i < len; i++)
data[i] = be16_to_cpu(chip->xfer_buf[i]);
return 0;
}
......
drivers/input/misc/ad714x-spi.c
View file @ 9eff794b
/*
* AD714X CapTouch Programmable Controller driver (SPI bus)
*
* Copyright 2009 Analog Devices Inc.
* Copyright 2009-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
......@@ -31,11 +31,12 @@ static int ad714x_spi_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume);
static int ad714x_spi_read(struct ad714x_chip *chip,
unsigned short reg, unsigned short *data)
unsigned short reg, unsigned short *data, size_t len)
{
struct spi_device *spi = to_spi_device(chip->dev);
struct spi_message message;
struct spi_transfer xfer[2];
int i;
int error;
spi_message_init(&message);
......@@ -48,7 +49,7 @@ static int ad714x_spi_read(struct ad714x_chip *chip,
spi_message_add_tail(&xfer[0], &message);
xfer[1].rx_buf = &chip->xfer_buf[1];
xfer[1].len = sizeof(chip->xfer_buf[1]);
xfer[1].len = sizeof(chip->xfer_buf[1]) * len;
spi_message_add_tail(&xfer[1], &message);
error = spi_sync(spi, &message);
......@@ -57,7 +58,9 @@ static int ad714x_spi_read(struct ad714x_chip *chip,
return error;
}
*data = be16_to_cpu(chip->xfer_buf[1]);
for (i = 0; i < len; i++)
data[i] = be16_to_cpu(chip->xfer_buf[i + 1]);
return 0;
}
......
drivers/input/misc/ad714x.c
View file @ 9eff794b
/*
* AD714X CapTouch Programmable Controller driver supporting AD7142/3/7/8/7A
*
* Copyright 2009 Analog Devices Inc.
* Copyright 2009-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
......@@ -123,6 +123,7 @@ struct ad714x_driver_data {
* information to integrate all things which will be private data
* of spi/i2c device
*/
static void ad714x_use_com_int(struct ad714x_chip *ad714x,
int start_stage, int end_stage)
{
......@@ -131,11 +132,11 @@ static void ad714x_use_com_int(struct ad714x_chip *ad714x,
mask = ((1 << (end_stage + 1)) - 1) - ((1 << start_stage) - 1);
ad714x->read(ad714x, STG_COM_INT_EN_REG, &data);
ad714x->read(ad714x, STG_COM_INT_EN_REG, &data, 1);
data |= 1 << end_stage;
ad714x->write(ad714x, STG_COM_INT_EN_REG, data);
ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data);
ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data, 1);
data &= ~mask;
ad714x->write(ad714x, STG_HIGH_INT_EN_REG, data);
}
......@@ -148,11 +149,11 @@ static void ad714x_use_thr_int(struct ad714x_chip *ad714x,
mask = ((1 << (end_stage + 1)) - 1) - ((1 << start_stage) - 1);
ad714x->read(ad714x, STG_COM_INT_EN_REG, &data);
ad714x->read(ad714x, STG_COM_INT_EN_REG, &data, 1);
data &= ~(1 << end_stage);
ad714x->write(ad714x, STG_COM_INT_EN_REG, data);
ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data);
ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data, 1);
data |= mask;
ad714x->write(ad714x, STG_HIGH_INT_EN_REG, data);
}
......@@ -250,13 +251,16 @@ static void ad714x_slider_cal_sensor_val(struct ad714x_chip *ad714x, int idx)
struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx];
int i;
ad714x->read(ad714x, CDC_RESULT_S0 + hw->start_stage,
&ad714x->adc_reg[hw->start_stage],
hw->end_stage - hw->start_stage + 1);
for (i = hw->start_stage; i <= hw->end_stage; i++) {
ad714x->read(ad714x, CDC_RESULT_S0 + i, &ad714x->adc_reg[i]);
ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM,
&ad714x->amb_reg[i]);
&ad714x->amb_reg[i], 1);
ad714x->sensor_val[i] = abs(ad714x->adc_reg[i] -
ad714x->amb_reg[i]);
ad714x->sensor_val[i] =
abs(ad714x->adc_reg[i] - ad714x->amb_reg[i]);
}
}
......@@ -419,13 +423,16 @@ static void ad714x_wheel_cal_sensor_val(struct ad714x_chip *ad714x, int idx)
struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx];
int i;
ad714x->read(ad714x, CDC_RESULT_S0 + hw->start_stage,
&ad714x->adc_reg[hw->start_stage],
hw->end_stage - hw->start_stage + 1);
for (i = hw->start_stage; i <= hw->end_stage; i++) {
ad714x->read(ad714x, CDC_RESULT_S0 + i, &ad714x->adc_reg[i]);
ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM,
&ad714x->amb_reg[i]);
&ad714x->amb_reg[i], 1);
if (ad714x->adc_reg[i] > ad714x->amb_reg[i])
ad714x->sensor_val[i] = ad714x->adc_reg[i] -
ad714x->amb_reg[i];
ad714x->sensor_val[i] =
ad714x->adc_reg[i] - ad714x->amb_reg[i];
else
ad714x->sensor_val[i] = 0;
}
......@@ -570,13 +577,16 @@ static void touchpad_cal_sensor_val(struct ad714x_chip *ad714x, int idx)
struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx];
int i;
ad714x->read(ad714x, CDC_RESULT_S0 + hw->x_start_stage,
&ad714x->adc_reg[hw->x_start_stage],
hw->x_end_stage - hw->x_start_stage + 1);
for (i = hw->x_start_stage; i <= hw->x_end_stage; i++) {
ad714x->read(ad714x, CDC_RESULT_S0 + i, &ad714x->adc_reg[i]);
ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM,
&ad714x->amb_reg[i]);
&ad714x->amb_reg[i], 1);
if (ad714x->adc_reg[i] > ad714x->amb_reg[i])
ad714x->sensor_val[i] = ad714x->adc_reg[i] -
ad714x->amb_reg[i];
ad714x->sensor_val[i] =
ad714x->adc_reg[i] - ad714x->amb_reg[i];
else
ad714x->sensor_val[i] = 0;
}
......@@ -862,7 +872,7 @@ static int ad714x_hw_detect(struct ad714x_chip *ad714x)
{
unsigned short data;
ad714x->read(ad714x, AD714X_PARTID_REG, &data);
ad714x->read(ad714x, AD714X_PARTID_REG, &data, 1);
switch (data & 0xFFF0) {
case AD7142_PARTID:
ad714x->product = 0x7142;
......@@ -919,14 +929,12 @@ static void ad714x_hw_init(struct ad714x_chip *ad714x)
ad714x->write(ad714x, AD714X_SYSCFG_REG + i,
ad714x->hw->sys_cfg_reg[i]);
for (i = 0; i < SYS_CFGREG_NUM; i++)
ad714x->read(ad714x, AD714X_SYSCFG_REG + i, &data);
ad714x->read(ad714x, AD714X_SYSCFG_REG + i, &data, 1);
ad714x->write(ad714x, AD714X_STG_CAL_EN_REG, 0xFFF);
/* clear all interrupts */
ad714x->read(ad714x, STG_LOW_INT_STA_REG, &data);
ad714x->read(ad714x, STG_HIGH_INT_STA_REG, &data);
ad714x->read(ad714x, STG_COM_INT_STA_REG, &data);
ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state, 3);
}
static irqreturn_t ad714x_interrupt_thread(int irq, void *data)
......@@ -936,9 +944,7 @@ static irqreturn_t ad714x_interrupt_thread(int irq, void *data)
mutex_lock(&ad714x->mutex);
ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state);
ad714x->read(ad714x, STG_HIGH_INT_STA_REG, &ad714x->h_state);
ad714x->read(ad714x, STG_COM_INT_STA_REG, &ad714x->c_state);
ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state, 3);
for (i = 0; i < ad714x->hw->button_num; i++)
ad714x_button_state_machine(ad714x, i);
......@@ -1225,8 +1231,6 @@ EXPORT_SYMBOL(ad714x_disable);
int ad714x_enable(struct ad714x_chip *ad714x)
{
unsigned short data;
dev_dbg(ad714x->dev, "%s enter\n", __func__);
mutex_lock(&ad714x->mutex);
......@@ -1240,9 +1244,7 @@ int ad714x_enable(struct ad714x_chip *ad714x)
* otherwise we will get no chance to enter falling-edge irq again
*/
ad714x->read(ad714x, STG_LOW_INT_STA_REG, &data);
ad714x->read(ad714x, STG_HIGH_INT_STA_REG, &data);
ad714x->read(ad714x, STG_COM_INT_STA_REG, &data);
ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state, 3);
mutex_unlock(&ad714x->mutex);
......
drivers/input/misc/ad714x.h
View file @ 9eff794b
/*
* AD714X CapTouch Programmable Controller driver (bus interfaces)
*
* Copyright 2009 Analog Devices Inc.
* Copyright 2009-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
......@@ -18,12 +18,12 @@ struct ad714x_platform_data;
struct ad714x_driver_data;
struct ad714x_chip;
typedef int (*ad714x_read_t)(struct ad714x_chip *, unsigned short, unsigned short *);
typedef int (*ad714x_read_t)(struct ad714x_chip *, unsigned short, unsigned short *, size_t);
typedef int (*ad714x_write_t)(struct ad714x_chip *, unsigned short, unsigned short);
struct ad714x_chip {
unsigned short h_state;
unsigned short l_state;
unsigned short h_state;
unsigned short c_state;
unsigned short adc_reg[STAGE_NUM];
unsigned short amb_reg[STAGE_NUM];
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7