Commit 9f13ee6f authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Simon Horman

ARM: shmobile: r8a7790: add div4 clocks

DIV4 clocks control SD* core clocks.
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 8d100c04
......@@ -51,6 +51,7 @@
#define SMSTPCR7 0xe615014c
#define MODEMR 0xE6160060
#define SDCKCR 0xE6150074
static struct clk_mapping cpg_mapping = {
.phys = CPG_BASE,
......@@ -131,6 +132,29 @@ static struct clk *main_clks[] = {
&cp_clk,
};
/* SDHI (DIV4) clock */
static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10 };
static struct clk_div_mult_table div4_div_mult_table = {
.divisors = divisors,
.nr_divisors = ARRAY_SIZE(divisors),
};
static struct clk_div4_table div4_table = {
.div_mult_table = &div4_div_mult_table,
};
enum {
DIV4_SDH, DIV4_SD0, DIV4_SD1, DIV4_NR
};
struct clk div4_clks[DIV4_NR] = {
[DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
[DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
[DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1de0, CLK_ENABLE_ON_INIT),
};
/* MSTP */
enum { MSTP721, MSTP720,
MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
......@@ -173,6 +197,11 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("qspi", &qspi_clk),
CLKDEV_CON_ID("cp", &cp_clk),
/* DIV4 */
CLKDEV_CON_ID("sdh", &div4_clks[DIV4_SDH]),
CLKDEV_CON_ID("sd0", &div4_clks[DIV4_SD0]),
CLKDEV_CON_ID("sd1", &div4_clks[DIV4_SD1]),
/* MSTP */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
......@@ -232,6 +261,9 @@ void __init r8a7790_clock_init(void)
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
if (!ret)
ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment