Commit 9f82b044 authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branch 'asoc/topic/tlv320aic32x4' into asoc-next

parents cc43b456 1858fe97
......@@ -26,6 +26,7 @@ struct aic32x4_pdata {
u32 power_cfg;
u32 micpga_routing;
bool swapdacs;
int rstn_gpio;
};
#endif
......@@ -28,6 +28,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/cdev.h>
#include <linux/slab.h>
......@@ -65,6 +66,7 @@ struct aic32x4_priv {
u32 power_cfg;
u32 micpga_routing;
bool swapdacs;
int rstn_gpio;
};
/* 0dB min, 1dB steps */
......@@ -627,10 +629,20 @@ static int aic32x4_probe(struct snd_soc_codec *codec)
{
struct aic32x4_priv *aic32x4 = snd_soc_codec_get_drvdata(codec);
u32 tmp_reg;
int ret;
codec->hw_write = (hw_write_t) i2c_master_send;
codec->control_data = aic32x4->control_data;
if (aic32x4->rstn_gpio >= 0) {
ret = devm_gpio_request_one(codec->dev, aic32x4->rstn_gpio,
GPIOF_OUT_INIT_LOW, "tlv320aic32x4 rstn");
if (ret != 0)
return ret;
ndelay(10);
gpio_set_value(aic32x4->rstn_gpio, 1);
}
snd_soc_write(codec, AIC32X4_RESET, 0x01);
/* Power platform configuration */
......@@ -675,6 +687,16 @@ static int aic32x4_probe(struct snd_soc_codec *codec)
ARRAY_SIZE(aic32x4_snd_controls));
aic32x4_add_widgets(codec);
/*
* Workaround: for an unknown reason, the ADC needs to be powered up
* and down for the first capture to work properly. It seems related to
* a HW BUG or some kind of behavior not documented in the datasheet.
*/
tmp_reg = snd_soc_read(codec, AIC32X4_ADCSETUP);
snd_soc_write(codec, AIC32X4_ADCSETUP, tmp_reg |
AIC32X4_LADC_EN | AIC32X4_RADC_EN);
snd_soc_write(codec, AIC32X4_ADCSETUP, tmp_reg);
return 0;
}
......@@ -713,10 +735,12 @@ static __devinit int aic32x4_i2c_probe(struct i2c_client *i2c,
aic32x4->power_cfg = pdata->power_cfg;
aic32x4->swapdacs = pdata->swapdacs;
aic32x4->micpga_routing = pdata->micpga_routing;
aic32x4->rstn_gpio = pdata->rstn_gpio;
} else {
aic32x4->power_cfg = 0;
aic32x4->swapdacs = false;
aic32x4->micpga_routing = 0;
aic32x4->rstn_gpio = -1;
}
ret = snd_soc_register_codec(&i2c->dev,
......
......@@ -94,6 +94,9 @@
#define AIC32X4_WORD_LEN_24BITS 0x02
#define AIC32X4_WORD_LEN_32BITS 0x03
#define AIC32X4_LADC_EN (1 << 7)
#define AIC32X4_RADC_EN (1 << 6)
#define AIC32X4_I2S_MODE 0x00
#define AIC32X4_DSP_MODE 0x01
#define AIC32X4_RIGHT_JUSTIFIED_MODE 0x02
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment