Commit a0438590 authored by Shawn Guo's avatar Shawn Guo Committed by Chris Ball

mmc: sdhci-esdhc-imx: remove ESDHC_CD_GPIO handling from IO accessory

With commit 9444e07 (mmc: remove unncessary mmc_gpio_free_cd() call from
slot-gpio users) in place, the ESDHC_CD_GPIO handling in IO accessories
becomes unnecessary.  Remove it.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent 8213af3b
...@@ -150,16 +150,6 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) ...@@ -150,16 +150,6 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
u32 val = readl(host->ioaddr + reg); u32 val = readl(host->ioaddr + reg);
if (unlikely(reg == SDHCI_PRESENT_STATE)) {
/*
* After SDHCI core gets improved to never query
* SDHCI_CARD_PRESENT state in GPIO case, we can
* remove this check.
*/
if (boarddata->cd_type == ESDHC_CD_GPIO)
val &= ~SDHCI_CARD_PRESENT;
}
if (unlikely(reg == SDHCI_CAPABILITIES)) { if (unlikely(reg == SDHCI_CAPABILITIES)) {
/* In FSL esdhc IC module, only bit20 is used to indicate the /* In FSL esdhc IC module, only bit20 is used to indicate the
* ADMA2 capability of esdhc, but this bit is messed up on * ADMA2 capability of esdhc, but this bit is messed up on
...@@ -192,13 +182,6 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) ...@@ -192,13 +182,6 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
u32 data; u32 data;
if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) { if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
if (boarddata->cd_type == ESDHC_CD_GPIO)
/*
* These interrupts won't work with a custom
* card_detect gpio (only applied to mx25/35)
*/
val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
if (val & SDHCI_INT_CARD_INT) { if (val & SDHCI_INT_CARD_INT) {
/* /*
* Clear and then set D3CD bit to avoid missing the * Clear and then set D3CD bit to avoid missing the
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment