Commit a0574e04 authored by Atsushi Nemoto's avatar Atsushi Nemoto Committed by Ralf Baechle

[MIPS] Convert to RTC-class ds1742 driver

The generic rtc-ds1742 driver can be used for RBTX4927 and JMR3927
(with __swizzle_addr trick).  This patch also removes MIPS local
DS1742 stuff.
Signed-off-by: default avatarAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 148171b2
......@@ -1895,10 +1895,6 @@ config HZ
source "kernel/Kconfig.preempt"
config RTC_DS1742
bool "DS1742 BRAM/RTC support"
depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
config MIPS_INSANE_LARGE
bool "Support for large 64-bit configurations"
depends on CPU_R10000 && 64BIT
......
......@@ -148,7 +148,6 @@ CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_RTC_DS1742=y
# CONFIG_KEXEC is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
......@@ -802,7 +801,28 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# DMA Engine support
......
......@@ -2,4 +2,4 @@
# Makefile for the common code of TOSHIBA JMR-TX3927 board
#
obj-y += prom.o puts.o rtc_ds1742.o
obj-y += prom.o puts.o
/*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ahennessy@mvista.com
*
* arch/mips/jmr3927/common/rtc_ds1742.c
* Based on arch/mips/ddb5xxx/common/rtc_ds1386.c
* low-level RTC hookups for s for Dallas 1742 chip.
*
* Copyright (C) 2000-2001 Toshiba Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* This file exports a function, rtc_ds1386_init(), which expects an
* uncached base address as the argument. It will set the two function
* pointers expected by the MIPS generic timer code.
*/
#include <linux/bcd.h>
#include <linux/types.h>
#include <linux/time.h>
#include <linux/rtc.h>
#include <linux/ds1742rtc.h>
#include <asm/time.h>
#include <asm/addrspace.h>
#include <asm/debug.h>
#define EPOCH 2000
static unsigned long rtc_base;
static unsigned long
rtc_ds1742_get_time(void)
{
unsigned int year, month, day, hour, minute, second;
unsigned int century;
unsigned long flags;
spin_lock_irqsave(&rtc_lock, flags);
rtc_write(RTC_READ, RTC_CONTROL);
second = BCD2BIN(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK);
minute = BCD2BIN(rtc_read(RTC_MINUTES));
hour = BCD2BIN(rtc_read(RTC_HOURS));
day = BCD2BIN(rtc_read(RTC_DATE));
month = BCD2BIN(rtc_read(RTC_MONTH));
year = BCD2BIN(rtc_read(RTC_YEAR));
century = BCD2BIN(rtc_read(RTC_CENTURY) & RTC_CENTURY_MASK);
rtc_write(0, RTC_CONTROL);
spin_unlock_irqrestore(&rtc_lock, flags);
year += century * 100;
return mktime(year, month, day, hour, minute, second);
}
extern void to_tm(unsigned long tim, struct rtc_time * tm);
static int
rtc_ds1742_set_time(unsigned long t)
{
struct rtc_time tm;
u8 year, month, day, hour, minute, second;
u8 cmos_year, cmos_month, cmos_day, cmos_hour, cmos_minute, cmos_second;
int cmos_century;
unsigned long flags;
spin_lock_irqsave(&rtc_lock, flags);
rtc_write(RTC_READ, RTC_CONTROL);
cmos_second = (u8)(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK);
cmos_minute = (u8)rtc_read(RTC_MINUTES);
cmos_hour = (u8)rtc_read(RTC_HOURS);
cmos_day = (u8)rtc_read(RTC_DATE);
cmos_month = (u8)rtc_read(RTC_MONTH);
cmos_year = (u8)rtc_read(RTC_YEAR);
cmos_century = rtc_read(RTC_CENTURY) & RTC_CENTURY_MASK;
rtc_write(RTC_WRITE, RTC_CONTROL);
/* convert */
to_tm(t, &tm);
/* check each field one by one */
year = BIN2BCD(tm.tm_year - EPOCH);
if (year != cmos_year) {
rtc_write(year,RTC_YEAR);
}
month = BIN2BCD(tm.tm_mon);
if (month != (cmos_month & 0x1f)) {
rtc_write((month & 0x1f) | (cmos_month & ~0x1f),RTC_MONTH);
}
day = BIN2BCD(tm.tm_mday);
if (day != cmos_day) {
rtc_write(day, RTC_DATE);
}
if (cmos_hour & 0x40) {
/* 12 hour format */
hour = 0x40;
if (tm.tm_hour > 12) {
hour |= 0x20 | (BIN2BCD(hour-12) & 0x1f);
} else {
hour |= BIN2BCD(tm.tm_hour);
}
} else {
/* 24 hour format */
hour = BIN2BCD(tm.tm_hour) & 0x3f;
}
if (hour != cmos_hour) rtc_write(hour, RTC_HOURS);
minute = BIN2BCD(tm.tm_min);
if (minute != cmos_minute) {
rtc_write(minute, RTC_MINUTES);
}
second = BIN2BCD(tm.tm_sec);
if (second != cmos_second) {
rtc_write(second & RTC_SECONDS_MASK,RTC_SECONDS);
}
/* RTC_CENTURY and RTC_CONTROL share same address... */
rtc_write(cmos_century, RTC_CONTROL);
spin_unlock_irqrestore(&rtc_lock, flags);
return 0;
}
void
rtc_ds1742_init(unsigned long base)
{
u8 cmos_second;
/* remember the base */
rtc_base = base;
db_assert((rtc_base & 0xe0000000) == KSEG1);
/* set the function pointers */
rtc_mips_get_time = rtc_ds1742_get_time;
rtc_mips_set_time = rtc_ds1742_set_time;
/* clear oscillator stop bit */
rtc_write(RTC_READ, RTC_CONTROL);
cmos_second = (u8)(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK);
rtc_write(RTC_WRITE, RTC_CONTROL);
rtc_write(cmos_second, RTC_SECONDS); /* clear msb */
rtc_write(0, RTC_CONTROL);
}
......@@ -45,6 +45,7 @@
#include <linux/param.h> /* for HZ */
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#ifdef CONFIG_SERIAL_TXX9
#include <linux/tty.h>
#include <linux/serial.h>
......@@ -172,19 +173,10 @@ static cycle_t jmr3927_hpt_read(void)
return jiffies * (JMR3927_TIMER_CLK / HZ) + jmr3927_tmrptr->trr;
}
#define USE_RTC_DS1742
#ifdef USE_RTC_DS1742
extern void rtc_ds1742_init(unsigned long base);
#endif
static void __init jmr3927_time_init(void)
{
clocksource_mips.read = jmr3927_hpt_read;
mips_hpt_frequency = JMR3927_TIMER_CLK;
#ifdef USE_RTC_DS1742
if (jmr3927_have_nvram()) {
rtc_ds1742_init(JMR3927_IOC_NVRAMB_ADDR);
}
#endif
}
void __init plat_timer_setup(struct irqaction *irq)
......@@ -540,3 +532,32 @@ void __init tx3927_setup(void)
printk("TX3927 D-Cache WriteBack (CWF) .\n");
}
}
/* This trick makes rtc-ds1742 driver usable as is. */
unsigned long __swizzle_addr_b(unsigned long port)
{
if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR)
return port;
port = (port & 0xffff0000) | (port & 0x7fff << 1);
#ifdef __BIG_ENDIAN
return port;
#else
return port | 1;
#endif
}
EXPORT_SYMBOL(__swizzle_addr_b);
static int __init jmr3927_rtc_init(void)
{
struct resource res = {
.start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
.end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
.flags = IORESOURCE_MEM,
};
struct platform_device *dev;
if (!jmr3927_have_nvram())
return -ENODEV;
dev = platform_device_register_simple("ds1742", -1, &res, 1);
return IS_ERR(dev) ? PTR_ERR(dev) : 0;
}
device_initcall(jmr3927_rtc_init);
......@@ -132,9 +132,6 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB
#include <asm/wbflush.h>
#include <linux/bootmem.h>
#include <linux/blkdev.h>
#ifdef CONFIG_RTC_DS1742
#include <linux/ds1742rtc.h>
#endif
#ifdef CONFIG_TOSHIBA_FPCIB0
#include <asm/tx4927/smsc_fdc37m81x.h>
#endif
......
......@@ -53,6 +53,7 @@
#include <linux/pci.h>
#include <linux/timex.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
......@@ -64,9 +65,6 @@
#include <asm/time.h>
#include <linux/bootmem.h>
#include <linux/blkdev.h>
#ifdef CONFIG_RTC_DS1742
#include <linux/ds1742rtc.h>
#endif
#ifdef CONFIG_TOSHIBA_FPCIB0
#include <asm/tx4927/smsc_fdc37m81x.h>
#endif
......@@ -1020,69 +1018,12 @@ void __init toshiba_rbtx4927_setup(void)
"+\n");
}
#ifdef CONFIG_RTC_DS1742
extern unsigned long rtc_ds1742_get_time(void);
extern int rtc_ds1742_set_time(unsigned long);
extern void rtc_ds1742_wait(void);
#endif
void __init
toshiba_rbtx4927_time_init(void)
{
u32 c1;
u32 c2;
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT, "-\n");
#ifdef CONFIG_RTC_DS1742
rtc_mips_get_time = rtc_ds1742_get_time;
rtc_mips_set_time = rtc_ds1742_set_time;
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
":rtc_ds1742_init()-\n");
rtc_ds1742_init(0xbc010000);
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
":rtc_ds1742_init()+\n");
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
":Calibrate mips_hpt_frequency-\n");
rtc_ds1742_wait();
/* get the count */
c1 = read_c0_count();
/* wait for the seconds to change again */
rtc_ds1742_wait();
/* get the count again */
c2 = read_c0_count();
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
":Calibrate mips_hpt_frequency+\n");
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
":c1=%12u\n", c1);
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
":c2=%12u\n", c2);
/* this diff is as close as we are going to get to counter ticks per sec */
mips_hpt_frequency = abs(c2 - c1);
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
":f1=%12u\n", mips_hpt_frequency);
/* round to 1/10th of a MHz */
mips_hpt_frequency /= (100 * 1000);
mips_hpt_frequency *= (100 * 1000);
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
":f2=%12u\n", mips_hpt_frequency);
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_INFO,
":mips_hpt_frequency=%uHz (%uMHz)\n",
mips_hpt_frequency,
mips_hpt_frequency / 1000000);
#else
mips_hpt_frequency = 100000000;
#endif
mips_hpt_frequency = tx4927_cpu_clock / 2;
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT, "+\n");
......@@ -1095,3 +1036,16 @@ void __init toshiba_rbtx4927_timer_setup(struct irqaction *irq)
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIMER_SETUP,
"+\n");
}
static int __init toshiba_rbtx4927_rtc_init(void)
{
struct resource res = {
.start = 0x1c010000,
.end = 0x1c010000 + 0x800 - 1,
.flags = IORESOURCE_MEM,
};
struct platform_device *dev =
platform_device_register_simple("ds1742", -1, &res, 1);
return IS_ERR(dev) ? PTR_ERR(dev) : 0;
}
device_initcall(toshiba_rbtx4927_rtc_init);
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org)
*/
#ifndef _ASM_DS1742_H
#define _ASM_DS1742_H
#include <ds1742.h>
#endif /* _ASM_DS1742_H */
......@@ -179,12 +179,6 @@ static inline int jmr3927_have_isac(void)
#define jmr3927_have_nvram() \
((jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_IDT_MASK) == JMR3927_IOC_IDT)
/* NVRAM macro */
#define jmr3927_nvram_in(ofs) \
jmr3927_ioc_reg_in(JMR3927_IOC_NVRAMB_ADDR + ((ofs) << 1))
#define jmr3927_nvram_out(d, ofs) \
jmr3927_ioc_reg_out(d, JMR3927_IOC_NVRAMB_ADDR + ((ofs) << 1))
/* LED macro */
#define jmr3927_led_set(n/*0-16*/) jmr3927_ioc_reg_out(~(n), JMR3927_IOC_LED_ADDR)
#define jmr3927_io_led_set(n/*0-3*/) jmr3927_isac_reg_out((n), JMR3927_ISAC_LED_ADDR)
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003, 06 by Ralf Baechle
*/
#ifndef __ASM_MACH_JMR3927_DS1742_H
#define __ASM_MACH_JMR3927_DS1742_H
#include <asm/jmr3927/jmr3927.h>
#define rtc_read(reg) (jmr3927_nvram_in(reg))
#define rtc_write(data, reg) (jmr3927_nvram_out((data),(reg)))
#endif /* __ASM_MACH_JMR3927_DS1742_H */
#ifndef __ASM_MACH_JMR3927_MANGLE_PORT_H
#define __ASM_MACH_JMR3927_MANGLE_PORT_H
extern unsigned long __swizzle_addr_b(unsigned long port);
#define __swizzle_addr_w(port) (port)
#define __swizzle_addr_l(port) (port)
#define __swizzle_addr_q(port) (port)
#define ioswabb(a,x) (x)
#define __mem_ioswabb(a,x) (x)
#define ioswabw(a,x) le16_to_cpu(x)
#define __mem_ioswabw(a,x) (x)
#define ioswabl(a,x) le32_to_cpu(x)
#define __mem_ioswabl(a,x) (x)
#define ioswabq(a,x) le64_to_cpu(x)
#define __mem_ioswabq(a,x) (x)
#endif /* __ASM_MACH_JMR3927_MANGLE_PORT_H */
/*
* ds1742rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
*
* Copyright (C) 1999-2001 Toshiba Corporation
* Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
*
* Permission is hereby granted to copy, modify and redistribute this code
* in terms of the GNU Library General Public License, Version 2 or later,
* at your option.
*/
#ifndef __LINUX_DS1742RTC_H
#define __LINUX_DS1742RTC_H
#include <asm/ds1742.h>
#define RTC_BRAM_SIZE 0x800
#define RTC_OFFSET 0x7f8
/*
* Register summary
*/
#define RTC_CONTROL (RTC_OFFSET + 0)
#define RTC_CENTURY (RTC_OFFSET + 0)
#define RTC_SECONDS (RTC_OFFSET + 1)
#define RTC_MINUTES (RTC_OFFSET + 2)
#define RTC_HOURS (RTC_OFFSET + 3)
#define RTC_DAY (RTC_OFFSET + 4)
#define RTC_DATE (RTC_OFFSET + 5)
#define RTC_MONTH (RTC_OFFSET + 6)
#define RTC_YEAR (RTC_OFFSET + 7)
#define RTC_CENTURY_MASK 0x3f
#define RTC_SECONDS_MASK 0x7f
#define RTC_DAY_MASK 0x07
/*
* Bits in the Control/Century register
*/
#define RTC_WRITE 0x80
#define RTC_READ 0x40
/*
* Bits in the Seconds register
*/
#define RTC_STOP 0x80
/*
* Bits in the Day register
*/
#define RTC_BATT_FLAG 0x80
#define RTC_FREQ_TEST 0x40
#endif /* __LINUX_DS1742RTC_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment