Commit a08572ae authored by Paul Walmsley's avatar Paul Walmsley

Merge remote branch 'remotes/origin/voltage_split_2.6.39' into tmp-integration-2.6.39-20110310-024

Conflicts:
	arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
parents 2d403fe0 c0718df4
......@@ -59,10 +59,10 @@ endif
# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o voltage.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o voltage.o \
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \
cpuidle34xx.o pm_bus.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o voltage.o pm_bus.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o pm_bus.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
......@@ -78,13 +78,25 @@ endif
# PRCM
obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
vc3xxx_data.o vp3xxx_data.o
# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
# will be removed once the OMAP4 part of the codebase is converted to
# use OMAP4-specific PRCM functions.
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
cm44xx.o prcm_mpu44xx.o \
prminst44xx.o
prminst44xx.o vc44xx_data.o \
vp44xx_data.o
# OMAP voltage domains
ifeq ($(CONFIG_PM),y)
voltagedomain-common := voltage.o
obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \
voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \
voltagedomains44xx_data.o
endif
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
......
......@@ -23,7 +23,6 @@
#include <plat/i2c.h>
#include <plat/gpio.h>
#include <plat/mmc.h>
#include <plat/smartreflex.h>
#include <plat/mcbsp.h>
#include <plat/mcspi.h>
#include <plat/dmtimer.h>
......
......@@ -21,6 +21,8 @@
#include <plat/omap_hwmod.h>
#include "voltage.h"
/*
* *BIG FAT WARNING*:
* USE the following ONLY in opp data initialization common to an SoC.
......@@ -65,8 +67,30 @@ struct omap_opp_def {
.u_volt = _uv, \
}
/*
* Initialization wrapper used to define SmartReflex process data
* XXX Is this needed? Just use C99 initializers in data files?
*/
#define VOLT_DATA_DEFINE(_v_nom, _efuse_offs, _errminlimit, _errgain) \
{ \
.volt_nominal = _v_nom, \
.sr_efuse_offs = _efuse_offs, \
.sr_errminlimit = _errminlimit, \
.vp_errgain = _errgain \
}
/* Use this to initialize the default table */
extern int __init omap_init_opp_table(struct omap_opp_def *opp_def,
u32 opp_def_size);
extern struct omap_volt_data omap34xx_vddmpu_volt_data[];
extern struct omap_volt_data omap34xx_vddcore_volt_data[];
extern struct omap_volt_data omap36xx_vddmpu_volt_data[];
extern struct omap_volt_data omap36xx_vddcore_volt_data[];
extern struct omap_volt_data omap44xx_vdd_mpu_volt_data[];
extern struct omap_volt_data omap44xx_vdd_iva_volt_data[];
extern struct omap_volt_data omap44xx_vdd_core_volt_data[];
#endif /* __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H */
......@@ -18,7 +18,7 @@
#include <linux/kernel.h>
#include <linux/i2c/twl.h>
#include <plat/voltage.h>
#include "voltage.h"
#include "pm.h"
......
......@@ -4,8 +4,9 @@
* Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/
* Nishanth Menon
* Kevin Hilman
* Copyright (C) 2010 Nokia Corporation.
* Copyright (C) 2010-2011 Nokia Corporation.
* Eduardo Valentin
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -20,8 +21,71 @@
#include <plat/cpu.h>
#include "control.h"
#include "omap_opp_data.h"
/* 34xx */
/* VDD1 */
#define OMAP3430_VDD_MPU_OPP1_UV 975000
#define OMAP3430_VDD_MPU_OPP2_UV 1075000
#define OMAP3430_VDD_MPU_OPP3_UV 1200000
#define OMAP3430_VDD_MPU_OPP4_UV 1270000
#define OMAP3430_VDD_MPU_OPP5_UV 1350000
struct omap_volt_data omap34xx_vddmpu_volt_data[] = {
VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD1, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD1, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD1, 0xf9, 0x18),
VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP4_UV, OMAP343X_CONTROL_FUSE_OPP4_VDD1, 0xf9, 0x18),
VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP5_UV, OMAP343X_CONTROL_FUSE_OPP5_VDD1, 0xf9, 0x18),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
/* VDD2 */
#define OMAP3430_VDD_CORE_OPP1_UV 975000
#define OMAP3430_VDD_CORE_OPP2_UV 1050000
#define OMAP3430_VDD_CORE_OPP3_UV 1150000
struct omap_volt_data omap34xx_vddcore_volt_data[] = {
VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD2, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD2, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD2, 0xf9, 0x18),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
/* 36xx */
/* VDD1 */
#define OMAP3630_VDD_MPU_OPP50_UV 1012500
#define OMAP3630_VDD_MPU_OPP100_UV 1200000
#define OMAP3630_VDD_MPU_OPP120_UV 1325000
#define OMAP3630_VDD_MPU_OPP1G_UV 1375000
struct omap_volt_data omap36xx_vddmpu_volt_data[] = {
VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD1, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD1, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP120_UV, OMAP3630_CONTROL_FUSE_OPP120_VDD1, 0xfa, 0x23),
VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP1G_UV, OMAP3630_CONTROL_FUSE_OPP1G_VDD1, 0xfa, 0x27),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
/* VDD2 */
#define OMAP3630_VDD_CORE_OPP50_UV 1000000
#define OMAP3630_VDD_CORE_OPP100_UV 1200000
struct omap_volt_data omap36xx_vddcore_volt_data[] = {
VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD2, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD2, 0xf9, 0x16),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
/* OPP data */
static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
/* MPU OPP1 */
OPP_INITIALIZER("mpu", true, 125000000, 975000),
......
......@@ -5,8 +5,9 @@
* Nishanth Menon
* Kevin Hilman
* Thara Gopinath
* Copyright (C) 2010 Nokia Corporation.
* Copyright (C) 2010-2011 Nokia Corporation.
* Eduardo Valentin
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -21,8 +22,48 @@
#include <plat/cpu.h>
#include "control.h"
#include "omap_opp_data.h"
/*
* Structures containing OMAP4430 voltage supported and various
* voltage dependent data for each VDD.
*/
#define OMAP4430_VDD_MPU_OPP50_UV 930000
#define OMAP4430_VDD_MPU_OPP100_UV 1100000
#define OMAP4430_VDD_MPU_OPPTURBO_UV 1260000
#define OMAP4430_VDD_MPU_OPPNITRO_UV 1350000
struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
#define OMAP4430_VDD_IVA_OPP50_UV 930000
#define OMAP4430_VDD_IVA_OPP100_UV 1100000
#define OMAP4430_VDD_IVA_OPPTURBO_UV 1260000
struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
#define OMAP4430_VDD_CORE_OPP50_UV 930000
#define OMAP4430_VDD_CORE_OPP100_UV 1100000
struct omap_volt_data omap44xx_vdd_core_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
/* MPU OPP1 - OPP50 */
OPP_INITIALIZER("mpu", true, 300000000, 1100000),
......
......@@ -18,8 +18,8 @@
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
#include <plat/common.h>
#include <plat/voltage.h>
#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include "pm.h"
......
......@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
#include <plat/smartreflex.h>
#include "smartreflex.h"
static int sr_class3_enable(struct voltagedomain *voltdm)
{
......
......@@ -26,9 +26,9 @@
#include <linux/pm_runtime.h>
#include <plat/common.h>
#include <plat/smartreflex.h>
#include "pm.h"
#include "smartreflex.h"
#define SMARTREFLEX_NAME_LEN 16
#define NVALUE_NAME_LEN 40
......
......@@ -21,7 +21,8 @@
#define __ASM_ARM_OMAP_SMARTREFLEX_H
#include <linux/platform_device.h>
#include <plat/voltage.h>
#include "voltage.h"
/*
* Different Smartreflex IPs version. The v1 is the 65nm version used in
......
......@@ -23,9 +23,9 @@
#include <linux/io.h>
#include <plat/omap_device.h>
#include <plat/smartreflex.h>
#include <plat/voltage.h>
#include "smartreflex.h"
#include "voltage.h"
#include "control.h"
#include "pm.h"
......
/*
* OMAP3/4 Voltage Controller (VC) structure and macro definitions
*
* Copyright (C) 2007, 2010 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Lesly A M <x0080970@ti.com>
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008, 2011 Nokia Corporation
* Kalle Jokiniemi
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_VC_H
#define __ARCH_ARM_MACH_OMAP2_VC_H
#include <linux/kernel.h>
/**
* struct omap_vc_common_data - per-VC register/bitfield data
* @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
* @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
* @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
* @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
* @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
* @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register
* @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register
* @regaddr_shift: REGADDR field shift in PRM_VC_BYPASS_VAL register
* @cmd_on_shift: ON field shift in PRM_VC_CMD_VAL_* register
* @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
*
* XXX One of cmd_on_mask and cmd_on_shift are not needed
* XXX VALID should probably be a shift, not a mask
*/
struct omap_vc_common_data {
u32 cmd_on_mask;
u32 valid;
u8 smps_sa_reg;
u8 smps_volra_reg;
u8 bypass_val_reg;
u8 data_shift;
u8 slaveaddr_shift;
u8 regaddr_shift;
u8 cmd_on_shift;
u8 cmd_onlp_shift;
u8 cmd_ret_shift;
u8 cmd_off_shift;
};
/**
* struct omap_vc_instance_data - VC per-instance data
* @vc_common: pointer to VC common data for this platform
* @smps_sa_mask: SA* bitmask in the PRM_VC_SMPS_SA register
* @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
* @smps_sa_shift: SA* field shift in the PRM_VC_SMPS_SA register
* @smps_volra_shift: VOLRA* field shift in the PRM_VC_VOL_RA register
*
* XXX It is not necessary to have both a *_mask and a *_shift -
* remove one
*/
struct omap_vc_instance_data {
const struct omap_vc_common_data *vc_common;
u32 smps_sa_mask;
u32 smps_volra_mask;
u8 cmdval_reg;
u8 smps_sa_shift;
u8 smps_volra_shift;
};
extern struct omap_vc_instance_data omap3_vc1_data;
extern struct omap_vc_instance_data omap3_vc2_data;
extern struct omap_vc_instance_data omap4_vc_mpu_data;
extern struct omap_vc_instance_data omap4_vc_iva_data;
extern struct omap_vc_instance_data omap4_vc_core_data;
#endif
/*
* OMAP3 Voltage Controller (VC) data
*
* Copyright (C) 2007, 2010 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Lesly A M <x0080970@ti.com>
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008, 2011 Nokia Corporation
* Kalle Jokiniemi
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/err.h>
#include <linux/init.h>
#include <plat/common.h>
#include "prm-regbits-34xx.h"
#include "voltage.h"
#include "vc.h"
/*
* VC data common to 34xx/36xx chips
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
static struct omap_vc_common_data omap3_vc_common = {
.smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
.smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET,
.data_shift = OMAP3430_DATA_SHIFT,
.slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT,
.regaddr_shift = OMAP3430_REGADDR_SHIFT,
.valid = OMAP3430_VALID_MASK,
.cmd_on_shift = OMAP3430_VC_CMD_ON_SHIFT,
.cmd_on_mask = OMAP3430_VC_CMD_ON_MASK,
.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT,
.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT,
.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT,
};
struct omap_vc_instance_data omap3_vc1_data = {
.vc_common = &omap3_vc_common,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET,
.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK,
.smps_volra_shift = OMAP3430_VOLRA0_SHIFT,
.smps_volra_mask = OMAP3430_VOLRA0_MASK,
};
struct omap_vc_instance_data omap3_vc2_data = {
.vc_common = &omap3_vc_common,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET,
.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK,
.smps_volra_shift = OMAP3430_VOLRA1_SHIFT,
.smps_volra_mask = OMAP3430_VOLRA1_MASK,
};
/*
* OMAP4 Voltage Controller (VC) data
*
* Copyright (C) 2007, 2010 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Lesly A M <x0080970@ti.com>
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008, 2011 Nokia Corporation
* Kalle Jokiniemi
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/err.h>
#include <linux/init.h>
#include <plat/common.h>
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "voltage.h"
#include "vc.h"
/*
* VC data common to 44xx chips
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
static const struct omap_vc_common_data omap4_vc_common = {
.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET,
.data_shift = OMAP4430_DATA_SHIFT,
.slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT,
.regaddr_shift = OMAP4430_REGADDR_SHIFT,
.valid = OMAP4430_VALID_MASK,
.cmd_on_shift = OMAP4430_ON_SHIFT,
.cmd_on_mask = OMAP4430_ON_MASK,
.cmd_onlp_shift = OMAP4430_ONLP_SHIFT,
.cmd_ret_shift = OMAP4430_RET_SHIFT,
.cmd_off_shift = OMAP4430_OFF_SHIFT,
};
/* VC instance data for each controllable voltage line */
struct omap_vc_instance_data omap4_vc_mpu_data = {
.vc_common = &omap4_vc_common,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET,
.smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK,
.smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK,
};
struct omap_vc_instance_data omap4_vc_iva_data = {
.vc_common = &omap4_vc_common,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET,
.smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK,
.smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK,
};
struct omap_vc_instance_data omap4_vc_core_data = {
.vc_common = &omap4_vc_common,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET,
.smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK,
.smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK,
};
This diff is collapsed.
......@@ -16,6 +16,10 @@
#include <linux/err.h>
#include "vc.h"
#include "vp.h"
/* XXX document */
#define VOLTSCALE_VPFORCEUPDATE 1
#define VOLTSCALE_VCBYPASS 2
......@@ -27,36 +31,22 @@
#define OMAP3_VOLTOFFSET 0xff
#define OMAP3_VOLTSETUP2 0xff
/* Voltage value defines */
#define OMAP3430_VDD_MPU_OPP1_UV 975000
#define OMAP3430_VDD_MPU_OPP2_UV 1075000
#define OMAP3430_VDD_MPU_OPP3_UV 1200000
#define OMAP3430_VDD_MPU_OPP4_UV 1270000
#define OMAP3430_VDD_MPU_OPP5_UV 1350000
#define OMAP3430_VDD_CORE_OPP1_UV 975000
#define OMAP3430_VDD_CORE_OPP2_UV 1050000
#define OMAP3430_VDD_CORE_OPP3_UV 1150000
#define OMAP3630_VDD_MPU_OPP50_UV 1012500
#define OMAP3630_VDD_MPU_OPP100_UV 1200000
#define OMAP3630_VDD_MPU_OPP120_UV 1325000
#define OMAP3630_VDD_MPU_OPP1G_UV 1375000
#define OMAP3630_VDD_CORE_OPP50_UV 1000000
#define OMAP3630_VDD_CORE_OPP100_UV 1200000
#define OMAP4430_VDD_MPU_OPP50_UV 930000
#define OMAP4430_VDD_MPU_OPP100_UV 1100000
#define OMAP4430_VDD_MPU_OPPTURBO_UV 1260000
#define OMAP4430_VDD_MPU_OPPNITRO_UV 1350000
#define OMAP4430_VDD_IVA_OPP50_UV 930000
#define OMAP4430_VDD_IVA_OPP100_UV 1100000
#define OMAP4430_VDD_IVA_OPPTURBO_UV 1260000
#define OMAP4430_VDD_CORE_OPP50_UV 930000
#define OMAP4430_VDD_CORE_OPP100_UV 1100000
/**
* struct omap_vfsm_instance_data - per-voltage manager FSM register/bitfield
* data
* @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register
* @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base
* @voltsetup_shift: SETUP_TIME* field shift in the PRM_VOLTSETUP* register
*
* XXX What about VOLTOFFSET/VOLTCTRL?
* XXX It is not necessary to have both a _mask and a _shift for the same
* bitfield - remove one!
*/
struct omap_vfsm_instance_data {
u32 voltsetup_mask;
u8 voltsetup_reg;
u8 voltsetup_shift;
};
/**
* struct voltagedomain - omap voltage domain global structure.
......@@ -113,6 +103,42 @@ struct omap_volt_pmic_info {
u8 (*uv_to_vsel) (unsigned long uV);
};
/**
* omap_vdd_info - Per Voltage Domain info
*
* @volt_data : voltage table having the distinct voltages supported
* by the domain and other associated per voltage data.
* @pmic_info : pmic specific parameters which should be populted by
* the pmic drivers.
* @vp_data : the register values, shifts, masks for various
* vp registers
* @vp_rt_data : VP data derived at runtime, not predefined
* @vc_data : structure containing various various vc registers,
* shifts, masks etc.
* @vfsm : voltage manager FSM data
* @voltdm : pointer to the voltage domain structure
* @debug_dir : debug directory for this voltage domain.
* @curr_volt : current voltage for this vdd.
* @vp_enabled : flag to keep track of whether vp is enabled or not
* @volt_scale : API to scale the voltage of the vdd.
*/
struct omap_vdd_info {
struct omap_volt_data *volt_data;
struct omap_volt_pmic_info *pmic_info;
struct omap_vp_instance_data *vp_data;
struct omap_vp_runtime_data vp_rt_data;
struct omap_vc_instance_data *vc_data;
const struct omap_vfsm_instance_data *vfsm;
struct voltagedomain voltdm;
struct dentry *debug_dir;
u32 curr_volt;
bool vp_enabled;
u32 (*read_reg) (u16 mod, u8 offset);
void (*write_reg) (u32 val, u16 mod, u8 offset);
int (*volt_scale) (struct omap_vdd_info *vdd,
unsigned long target_volt);
};
unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
void omap_vp_enable(struct voltagedomain *voltdm);
void omap_vp_disable(struct voltagedomain *voltdm);
......@@ -125,6 +151,9 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
unsigned long volt);
unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod,
struct omap_vdd_info *omap_vdd_array[],
u8 omap_vdd_count);
#ifdef CONFIG_PM
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
struct omap_volt_pmic_info *pmic_info);
......
/*
* OMAP3 voltage domain data
*
* Copyright (C) 2007, 2010 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Lesly A M <x0080970@ti.com>
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008, 2011 Nokia Corporation
* Kalle Jokiniemi
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/init.h>
#include <plat/common.h>
#include <plat/cpu.h>
#include "prm-regbits-34xx.h"
#include "omap_opp_data.h"
#include "voltage.h"
#include "vc.h"
#include "vp.h"
/*
* VDD data
*/
static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = {
.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET,
.voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT,
.voltsetup_mask = OMAP3430_SETUP_TIME1_MASK,
};
static struct omap_vdd_info omap3_vdd1_info = {
.vp_data = &omap3_vp1_data,
.vc_data = &omap3_vc1_data,
.vfsm = &omap3_vdd1_vfsm_data,
.voltdm = {
.name = "mpu",
},
};
static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = {
.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET,
.voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT,
.voltsetup_mask = OMAP3430_SETUP_TIME2_MASK,
};
static struct omap_vdd_info omap3_vdd2_info = {
.vp_data = &omap3_vp2_data,
.vc_data = &omap3_vc2_data,
.vfsm = &omap3_vdd2_vfsm_data,
.voltdm = {
.name = "core",
},
};
/* OMAP3 VDD structures */
static struct omap_vdd_info *omap3_vdd_info[] = {
&omap3_vdd1_info,
&omap3_vdd2_info,
};
/* OMAP3 specific voltage init functions */
static int __init omap3xxx_voltage_early_init(void)
{
s16 prm_mod = OMAP3430_GR_MOD;
s16 prm_irqst_ocp_mod = OCP_MOD;
if (!cpu_is_omap34xx())
return 0;
/*
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
if (cpu_is_omap3630()) {
omap3_vdd1_info.volt_data = omap36xx_vddmpu_volt_data;
omap3_vdd2_info.volt_data = omap36xx_vddcore_volt_data;
} else {
omap3_vdd1_info.volt_data = omap34xx_vddmpu_volt_data;
omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data;
}
return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
omap3_vdd_info,
ARRAY_SIZE(omap3_vdd_info));
};
core_initcall(omap3xxx_voltage_early_init);
/*
* OMAP3/OMAP4 Voltage Management Routines
*
* Author: Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2007 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Lesly A M <x0080970@ti.com>
*
* Copyright (C) 2008 Nokia Corporation
* Kalle Jokiniemi
*
* Copyright (C) 2010 Texas Instruments, Inc.
* Thara Gopinath <thara@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/init.h>
#include <plat/common.h>
#include "prm-regbits-44xx.h"
#include "prm44xx.h"
#include "prcm44xx.h"
#include "prminst44xx.h"
#include "voltage.h"
#include "omap_opp_data.h"
#include "vc.h"
#include "vp.h"
static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET,
};
static struct omap_vdd_info omap4_vdd_mpu_info = {
.vp_data = &omap4_vp_mpu_data,
.vc_data = &omap4_vc_mpu_data,
.vfsm = &omap4_vdd_mpu_vfsm_data,
.voltdm = {
.name = "mpu",
},
};
static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET,
};
static struct omap_vdd_info omap4_vdd_iva_info = {
.vp_data = &omap4_vp_iva_data,
.vc_data = &omap4_vc_iva_data,
.vfsm = &omap4_vdd_iva_vfsm_data,
.voltdm = {
.name = "iva",
},
};
static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET,
};
static struct omap_vdd_info omap4_vdd_core_info = {
.vp_data = &omap4_vp_core_data,
.vc_data = &omap4_vc_core_data,
.vfsm = &omap4_vdd_core_vfsm_data,
.voltdm = {
.name = "core",
},
};
/* OMAP4 VDD structures */
static struct omap_vdd_info *omap4_vdd_info[] = {
&omap4_vdd_mpu_info,
&omap4_vdd_iva_info,
&omap4_vdd_core_info,
};
/* OMAP4 specific voltage init functions */
static int __init omap44xx_voltage_early_init(void)
{
s16 prm_mod = OMAP4430_PRM_DEVICE_INST;
s16 prm_irqst_ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST;
if (!cpu_is_omap44xx())
return 0;
/*
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
omap4_vdd_mpu_info.volt_data = omap44xx_vdd_mpu_volt_data;
omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data;
omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data;
return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
omap4_vdd_info,
ARRAY_SIZE(omap4_vdd_info));
};
core_initcall(omap44xx_voltage_early_init);
/*
* OMAP3/4 Voltage Processor (VP) structure and macro definitions
*
* Copyright (C) 2007, 2010 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Lesly A M <x0080970@ti.com>
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008, 2011 Nokia Corporation
* Kalle Jokiniemi
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_VP_H
#define __ARCH_ARM_MACH_OMAP2_VP_H
#include <linux/kernel.h>
/* XXX document */
#define VP_IDLE_TIMEOUT 200
#define VP_TRANXDONE_TIMEOUT 300
/**
* struct omap_vp_common_data - register data common to all VDDs
* @vpconfig_errorgain_mask: ERRORGAIN bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_initvoltage_mask: INITVOLTAGE bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_timeouten_mask: TIMEOUT bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_initvdd: INITVDD bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_forceupdate: FORCEUPDATE bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_vpenable: VPENABLE bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_erroroffset_shift: ERROROFFSET field shift in PRM_VP*_CONFIG reg
* @vpconfig_errorgain_shift: ERRORGAIN field shift in PRM_VP*_CONFIG reg
* @vpconfig_initvoltage_shift: INITVOLTAGE field shift in PRM_VP*_CONFIG reg
* @vpconfig_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg
* @vpconfig_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg
* @vpconfig_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg
* @vpconfig_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg
* @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
* @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
* @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
*
* XXX It it not necessary to have both a mask and a shift for the same
* bitfield - remove one
* XXX Many of these fields are wrongly named -- e.g., vpconfig_smps* -- fix!
*/
struct omap_vp_common_data {
u32 vpconfig_errorgain_mask;
u32 vpconfig_initvoltage_mask;
u32 vpconfig_timeouten;
u32 vpconfig_initvdd;
u32 vpconfig_forceupdate;
u32 vpconfig_vpenable;
u8 vpconfig_erroroffset_shift;
u8 vpconfig_errorgain_shift;
u8 vpconfig_initvoltage_shift;
u8 vstepmin_stepmin_shift;
u8 vstepmin_smpswaittimemin_shift;
u8 vstepmax_stepmax_shift;
u8 vstepmax_smpswaittimemax_shift;
u8 vlimitto_vddmin_shift;
u8 vlimitto_vddmax_shift;
u8 vlimitto_timeout_shift;
};
/**
* struct omap_vp_prm_irqst_data - PRM_IRQSTATUS_MPU.VP_TRANXDONE_ST data
* @prm_irqst_reg: reg offset for PRM_IRQSTATUS_MPU from top of PRM
* @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
*
* XXX prm_irqst_reg does not belong here
* XXX Note that on OMAP3, VP_TRANXDONE interrupt may not work due to a
* hardware bug
* XXX This structure is probably not needed
*/
struct omap_vp_prm_irqst_data {
u8 prm_irqst_reg;
u32 tranxdone_status;
};
/**
* struct omap_vp_instance_data - VP register offsets (per-VDD)
* @vp_common: pointer to struct omap_vp_common_data * for this SoC
* @prm_irqst_data: pointer to struct omap_vp_prm_irqst_data for this VDD
* @vpconfig: PRM_VP*_CONFIG reg offset from PRM start
* @vstepmin: PRM_VP*_VSTEPMIN reg offset from PRM start
* @vlimitto: PRM_VP*_VLIMITTO reg offset from PRM start
* @vstatus: PRM_VP*_VSTATUS reg offset from PRM start
* @voltage: PRM_VP*_VOLTAGE reg offset from PRM start
*
* XXX vp_common is probably not needed since it is per-SoC
*/
struct omap_vp_instance_data {
const struct omap_vp_common_data *vp_common;
const struct omap_vp_prm_irqst_data *prm_irqst_data;
u8 vpconfig;
u8 vstepmin;
u8 vstepmax;
u8 vlimitto;
u8 vstatus;
u8 voltage;
};
/**
* struct omap_vp_runtime_data - VP data populated at runtime by code
* @vpconfig_erroroffset: value of ERROROFFSET bitfield in PRM_VP*_CONFIG
* @vpconfig_errorgain: value of ERRORGAIN bitfield in PRM_VP*_CONFIG
* @vstepmin_smpswaittimemin: value of SMPSWAITTIMEMIN bitfield in PRM_VP*_VSTEPMIN
* @vstepmax_smpswaittimemax: value of SMPSWAITTIMEMAX bitfield in PRM_VP*_VSTEPMAX
* @vlimitto_timeout: value of TIMEOUT bitfield in PRM_VP*_VLIMITTO
* @vstepmin_stepmin: value of VSTEPMIN bitfield in PRM_VP*_VSTEPMIN
* @vstepmax_stepmax: value of VSTEPMAX bitfield in PRM_VP*_VSTEPMAX
* @vlimitto_vddmin: value of VDDMIN bitfield in PRM_VP*_VLIMITTO
* @vlimitto_vddmax: value of VDDMAX bitfield in PRM_VP*_VLIMITTO
*
* XXX Is this structure really needed? Why not just program the
* device directly? They are in PRM space, therefore in the WKUP
* powerdomain, so register contents should not be lost in off-mode.
* XXX Some of these fields are incorrectly named, e.g., vstep*
*/
struct omap_vp_runtime_data {
u32 vpconfig_erroroffset;
u16 vpconfig_errorgain;
u16 vstepmin_smpswaittimemin;
u16 vstepmax_smpswaittimemax;
u16 vlimitto_timeout;
u8 vstepmin_stepmin;
u8 vstepmax_stepmax;
u8 vlimitto_vddmin;
u8 vlimitto_vddmax;
};
extern struct omap_vp_instance_data omap3_vp1_data;
extern struct omap_vp_instance_data omap3_vp2_data;
extern struct omap_vp_instance_data omap4_vp_mpu_data;
extern struct omap_vp_instance_data omap4_vp_iva_data;
extern struct omap_vp_instance_data omap4_vp_core_data;
#endif
/*
* OMAP3 Voltage Processor (VP) data
*
* Copyright (C) 2007, 2010 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Lesly A M <x0080970@ti.com>
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008, 2011 Nokia Corporation
* Kalle Jokiniemi
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/err.h>
#include <linux/init.h>
#include <plat/common.h>
#include "prm-regbits-34xx.h"
#include "voltage.h"
#include "vp.h"
/*
* VP data common to 34xx/36xx chips
* XXX This stuff presumably belongs in the vp3xxx.c or vp.c file.
*/
static const struct omap_vp_common_data omap3_vp_common = {
.vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT,
.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK,
.vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT,
.vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT,
.vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK,
.vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK,
.vpconfig_initvdd = OMAP3430_INITVDD_MASK,
.vpconfig_forceupdate = OMAP3430_FORCEUPDATE_MASK,
.vpconfig_vpenable = OMAP3430_VPENABLE_MASK,
.vstepmin_smpswaittimemin_shift = OMAP3430_SMPSWAITTIMEMIN_SHIFT,
.vstepmax_smpswaittimemax_shift = OMAP3430_SMPSWAITTIMEMAX_SHIFT,
.vstepmin_stepmin_shift = OMAP3430_VSTEPMIN_SHIFT,
.vstepmax_stepmax_shift = OMAP3430_VSTEPMAX_SHIFT,
.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT,
.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT,
.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT,
};
static const struct omap_vp_prm_irqst_data omap3_vp1_prm_irqst_data = {
.prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
};
struct omap_vp_instance_data omap3_vp1_data = {
.vp_common = &omap3_vp_common,
.vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET,
.vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET,
.vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET,
.vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET,
.vstatus = OMAP3_PRM_VP1_STATUS_OFFSET,
.voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET,
.prm_irqst_data = &omap3_vp1_prm_irqst_data,
};
static const struct omap_vp_prm_irqst_data omap3_vp2_prm_irqst_data = {
.prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
};
struct omap_vp_instance_data omap3_vp2_data = {
.vp_common = &omap3_vp_common,
.vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET,
.vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET,
.vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET,
.vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET,
.vstatus = OMAP3_PRM_VP2_STATUS_OFFSET,
.voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET,
.prm_irqst_data = &omap3_vp2_prm_irqst_data,
};
/*
* OMAP3 Voltage Processor (VP) data
*
* Copyright (C) 2007, 2010 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Lesly A M <x0080970@ti.com>
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008, 2011 Nokia Corporation
* Kalle Jokiniemi
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/err.h>
#include <linux/init.h>
#include <plat/common.h>
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "voltage.h"
#include "vp.h"
/*
* VP data common to 44xx chips
* XXX This stuff presumably belongs in the vp44xx.c or vp.c file.
*/
static const struct omap_vp_common_data omap4_vp_common = {
.vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT,
.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK,
.vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT,
.vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT,
.vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK,
.vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK,
.vpconfig_initvdd = OMAP4430_INITVDD_MASK,
.vpconfig_forceupdate = OMAP4430_FORCEUPDATE_MASK,
.vpconfig_vpenable = OMAP4430_VPENABLE_MASK,
.vstepmin_smpswaittimemin_shift = OMAP4430_SMPSWAITTIMEMIN_SHIFT,
.vstepmax_smpswaittimemax_shift = OMAP4430_SMPSWAITTIMEMAX_SHIFT,
.vstepmin_stepmin_shift = OMAP4430_VSTEPMIN_SHIFT,
.vstepmax_stepmax_shift = OMAP4430_VSTEPMAX_SHIFT,
.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT,
.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT,
.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT,
};
static const struct omap_vp_prm_irqst_data omap4_vp_mpu_prm_irqst_data = {
.prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET,
.tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK,
};
struct omap_vp_instance_data omap4_vp_mpu_data = {
.vp_common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET,
.prm_irqst_data = &omap4_vp_mpu_prm_irqst_data,
};
static const struct omap_vp_prm_irqst_data omap4_vp_iva_prm_irqst_data = {
.prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
.tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK,
};
struct omap_vp_instance_data omap4_vp_iva_data = {
.vp_common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET,
.prm_irqst_data = &omap4_vp_iva_prm_irqst_data,
};
static const struct omap_vp_prm_irqst_data omap4_vp_core_prm_irqst_data = {
.prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
.tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK,
};
struct omap_vp_instance_data omap4_vp_core_data = {
.vp_common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET,
.prm_irqst_data = &omap4_vp_core_prm_irqst_data,
};
......@@ -35,7 +35,6 @@
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <plat/cpu.h>
#include <plat/voltage.h>
struct omap_device;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment