drm/i915/chv: Add DPIO offset for Cherryview. v3

CHV has 2 display phys.  First phy (IOSF offset 0x1A) has two channels,
and second phy (IOSF offset 0x12) has single channel.  The first phy is
used for port B and port C, while second phy is only for port D.

v2: Move the pipe to determine which phy to select for
vlv_dpio_read/vlv_dpio_write to another patch. (Daniel)
v3: Rebase the code based on rework on how to calculate DPIO offset.
Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_drv.h

@@ -92,7 +92,7 @@ enum port {
 };
 #define port_name(p) ((p) + 'A')
 
-#define I915_NUM_PHYS_VLV 1
+#define I915_NUM_PHYS_VLV 2
 
 enum dpio_channel {
 	DPIO_CH0,

drivers/gpu/drm/i915/i915_reg.h

@@ -470,6 +470,7 @@
 #define   IOSF_PORT_PUNIT			0x4
 #define   IOSF_PORT_NC				0x11
 #define   IOSF_PORT_DPIO			0x12
+#define   IOSF_PORT_DPIO_2			0x1a
 #define   IOSF_PORT_GPIO_NC			0x13
 #define   IOSF_PORT_CCK				0x14
 #define   IOSF_PORT_CCU				0xA9

drivers/gpu/drm/i915/intel_display.c

@@ -1367,7 +1367,17 @@ static void intel_init_dpio(struct drm_device *dev)
 	if (!IS_VALLEYVIEW(dev))
 		return;
 
-	DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
+	/*
+	 * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
+	 * CHV x1 PHY (DP/HDMI D)
+	 * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
+	 */
+	if (IS_CHERRYVIEW(dev)) {
+		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
+		DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
+	} else {
+		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
+	}
 }
 
 static void intel_reset_dpio(struct drm_device *dev)