Commit a0ce9aca authored by Tejun Heo's avatar Tejun Heo

ata_piix: port enable for the first SATA controller of ICH8 is 0xf not 0x3

ICH8 and 9 use two SFF controllers to show 6 SATA ports.  The first
controllre hosts the first 4 ports while the second one hosts the last
2.  The PCS register of the first controller encompasses the first
four ports or all six ports depending on configuration while PCS of
the second controller controls the last two ports.  Using 0xf for the
first controller and 0x3 for the second controller always result in
the correct configuration.
Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
parent 8d8ef2fb
......@@ -430,7 +430,7 @@ static const struct piix_map_db ich6m_map_db = {
static const struct piix_map_db ich8_map_db = {
.mask = 0x3,
.port_enable = 0x3,
.port_enable = 0xf,
.map = {
/* PM PS SM SS MAP */
{ P0, P2, P1, P3 }, /* 00b (hardwired when in AHCI) */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment