Commit a0cf7ea9 authored by Hannes Reinecke's avatar Hannes Reinecke Committed by Alasdair G Kergon

dm mpath: change attached scsi_dh

When specifying a different hardware handler via multipath
features we should be able to override the built-in defaults.

The problem here is the hardware table from scsi_dh is compiled
in and cannot be changed from userland. The multipath.conf OTOH
is purely user-defined and, what's more, the user might have a valid
reason for modifying it.
(EG EMC Clariion can well be run in PNR mode even though ALUA is
active, or the user might want to try ALUA on any as-of-yet unknown
devices)

So _not_ allowing multipath to override the device handler setting
will just add to the confusion and makes error tracking even more
difficult.
Signed-off-by: default avatarHannes Reinecke <hare@suse.de>
Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
parent 4d89b7b4
......@@ -597,9 +597,20 @@ static struct pgpath *parse_path(struct arg_set *as, struct path_selector *ps,
}
if (m->hw_handler_name) {
r = scsi_dh_attach(bdev_get_queue(p->path.dev->bdev),
m->hw_handler_name);
struct request_queue *q = bdev_get_queue(p->path.dev->bdev);
r = scsi_dh_attach(q, m->hw_handler_name);
if (r == -EBUSY) {
/*
* Already attached to different hw_handler,
* try to reattach with correct one.
*/
scsi_dh_detach(q);
r = scsi_dh_attach(q, m->hw_handler_name);
}
if (r < 0) {
ti->error = "error attaching hardware handler";
dm_put_device(ti, p->path.dev);
goto bad;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment