Commit a10476d4 authored by Russell King's avatar Russell King Committed by Russell King

[ARM] pxa: Add zylonite MFP wakeup configurations

Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent d4fc858f
......@@ -53,13 +53,13 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
/* BTUART */
GPIO111_UART2_RTS,
GPIO112_UART2_RXD,
GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
GPIO113_UART2_TXD,
GPIO114_UART2_CTS,
GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
/* STUART */
GPIO109_UART3_TXD,
GPIO110_UART3_RXD,
GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
/* AC97 */
GPIO23_AC97_nACRESET,
......@@ -70,16 +70,16 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
GPIO28_AC97_SYNC,
/* Keypad */
GPIO107_KP_DKIN_0,
GPIO108_KP_DKIN_1,
GPIO115_KP_MKIN_0,
GPIO116_KP_MKIN_1,
GPIO117_KP_MKIN_2,
GPIO118_KP_MKIN_3,
GPIO119_KP_MKIN_4,
GPIO120_KP_MKIN_5,
GPIO2_2_KP_MKIN_6,
GPIO3_2_KP_MKIN_7,
GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
GPIO121_KP_MKOUT_0,
GPIO122_KP_MKOUT_1,
GPIO123_KP_MKOUT_2,
......@@ -91,7 +91,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
/* MMC1 */
GPIO3_MMC1_DAT0,
GPIO4_MMC1_DAT1,
GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
GPIO5_MMC1_DAT2,
GPIO6_MMC1_DAT3,
GPIO7_MMC1_CLK,
......@@ -100,7 +100,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
/* MMC2 */
GPIO9_MMC2_DAT0,
GPIO10_MMC2_DAT1,
GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
GPIO11_MMC2_DAT2,
GPIO12_MMC2_DAT3,
GPIO13_MMC2_CLK,
......@@ -109,12 +109,12 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
/* FFUART */
GPIO30_UART1_RXD,
GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
GPIO31_UART1_TXD,
GPIO32_UART1_CTS,
GPIO37_UART1_RTS,
GPIO33_UART1_DCD,
GPIO34_UART1_DSR,
GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
GPIO35_UART1_RI,
GPIO36_UART1_DTR,
......@@ -125,7 +125,7 @@ static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
/* FFUART */
GPIO99_UART1_RXD,
GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL,
GPIO100_UART1_TXD,
GPIO101_UART1_CTS,
GPIO106_UART1_RTS,
......@@ -136,7 +136,7 @@ static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
/* MMC3 */
GPIO7_2_MMC3_DAT0,
GPIO8_2_MMC3_DAT1,
GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH,
GPIO9_2_MMC3_DAT2,
GPIO10_2_MMC3_DAT3,
GPIO103_MMC3_CLK,
......
......@@ -51,11 +51,11 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO17_2_LCD_BIAS,
/* FFUART */
GPIO41_UART1_RXD,
GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
GPIO42_UART1_TXD,
GPIO43_UART1_CTS,
GPIO44_UART1_DCD,
GPIO45_UART1_DSR,
GPIO45_UART1_DSR | MFP_LPM_EDGE_FALL,
GPIO46_UART1_RI,
GPIO47_UART1_DTR,
GPIO48_UART1_RTS,
......@@ -73,16 +73,16 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO33_I2C_SDA,
/* Keypad */
GPIO105_KP_DKIN_0,
GPIO106_KP_DKIN_1,
GPIO113_KP_MKIN_0,
GPIO114_KP_MKIN_1,
GPIO115_KP_MKIN_2,
GPIO116_KP_MKIN_3,
GPIO117_KP_MKIN_4,
GPIO118_KP_MKIN_5,
GPIO119_KP_MKIN_6,
GPIO120_KP_MKIN_7,
GPIO105_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
GPIO106_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
GPIO113_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
GPIO114_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
GPIO115_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
GPIO116_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
GPIO117_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
GPIO118_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
GPIO119_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
GPIO120_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
GPIO121_KP_MKOUT_0,
GPIO122_KP_MKOUT_1,
GPIO123_KP_MKOUT_2,
......@@ -98,7 +98,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
/* MMC1 */
GPIO18_MMC1_DAT0,
GPIO19_MMC1_DAT1,
GPIO19_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
GPIO20_MMC1_DAT2,
GPIO21_MMC1_DAT3,
GPIO22_MMC1_CLK,
......@@ -107,7 +107,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
/* MMC2 */
GPIO24_MMC2_DAT0,
GPIO25_MMC2_DAT1,
GPIO25_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
GPIO26_MMC2_DAT2,
GPIO27_MMC2_DAT3,
GPIO28_MMC2_CLK,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment