Merge tag 'wireless-next-2023-11-27' of...

Merge tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.8

The first features pull request for v6.8. Not so big in number of
commits but we removed quite a few ancient drivers: libertas 16-bit
PCMCIA support, atmel, hostap, zd1201, orinoco, ray_cs, wl3501 and
rndis_wlan.

Major changes:

cfg80211/mac80211
 - extend support for scanning while Multi-Link Operation (MLO) connected

* tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (68 commits)
  wifi: nl80211: Documentation update for NL80211_CMD_PORT_AUTHORIZED event
  wifi: mac80211: Extend support for scanning while MLO connected
  wifi: cfg80211: Extend support for scanning while MLO connected
  wifi: ieee80211: fix PV1 frame control field name
  rfkill: return ENOTTY on invalid ioctl
  MAINTAINERS: update iwlwifi maintainers
  wifi: rtw89: 8922a: read efuse content from physical map
  wifi: rtw89: 8922a: read efuse content via efuse map struct from logic map
  wifi: rtw89: 8852c: read RX gain offset from efuse for 6GHz channels
  wifi: rtw89: mac: add to access efuse for WiFi 7 chips
  wifi: rtw89: mac: use mac_gen pointer to access about efuse
  wifi: rtw89: 8922a: add 8922A basic chip info
  wifi: rtlwifi: drop unused const_amdpci_aspm
  wifi: mwifiex: mwifiex_process_sleep_confirm_resp(): remove unused priv variable
  wifi: rtw89: regd: update regulatory map to R65-R44
  wifi: rtw89: regd: handle policy of 6 GHz according to BIOS
  wifi: rtw89: acpi: process 6 GHz band policy from DSM
  wifi: rtlwifi: simplify rtl_action_proc() and rtl_tx_agg_start()
  wifi: rtw89: pci: update interrupt mitigation register for 8922AE
  wifi: rtw89: pci: correct interrupt mitigation register for 8852CE
  ...
====================

Link: https://lore.kernel.org/r/20231127180056.0B48DC433C8@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/networking/device_drivers/wifi/index.rst

@@ -10,7 +10,6 @@ Contents:
 
    intel/ipw2100
    intel/ipw2200
-   ray_cs
 
 .. only::  subproject and html
 

Documentation/networking/device_drivers/wifi/ray_cs.rst

-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-=========================
-Raylink wireless LAN card
-=========================
-
-September 21, 1999
-
-Copyright |copy| 1998  Corey Thomas (corey@world.std.com)
-
-This file is the documentation for the Raylink Wireless LAN card driver for
-Linux.  The Raylink wireless LAN card is a PCMCIA card which provides IEEE
-802.11 compatible wireless network connectivity at 1 and 2 megabits/second.
-See http://www.raytheon.com/micro/raylink/ for more information on the Raylink
-card.  This driver is in early development and does have bugs.  See the known
-bugs and limitations at the end of this document for more information.
-This driver also works with WebGear's Aviator 2.4 and Aviator Pro
-wireless LAN cards.
-
-As of kernel 2.3.18, the ray_cs driver is part of the Linux kernel
-source.  My web page for the development of ray_cs is at
-http://web.ralinktech.com/ralink/Home/Support/Linux.html
-and I can be emailed at corey@world.std.com
-
-The kernel driver is based on ray_cs-1.62.tgz
-
-The driver at my web page is intended to be used as an add on to
-David Hinds pcmcia package.  All the command line parameters are
-available when compiled as a module.  When built into the kernel, only
-the essid= string parameter is available via the kernel command line.
-This will change after the method of sorting out parameters for all
-the PCMCIA drivers is agreed upon.  If you must have a built in driver
-with nondefault parameters, they can be edited in
-/usr/src/linux/drivers/net/pcmcia/ray_cs.c.  Searching for module_param
-will find them all.
-
-Information on card services is available at:
-
-	http://pcmcia-cs.sourceforge.net/
-
-
-Card services user programs are still required for PCMCIA devices.
-pcmcia-cs-3.1.1 or greater is required for the kernel version of
-the driver.
-
-Currently, ray_cs is not part of David Hinds card services package,
-so the following magic is required.
-
-At the end of the /etc/pcmcia/config.opts file, add the line:
-source ./ray_cs.opts
-This will make card services read the ray_cs.opts file
-when starting.  Create the file /etc/pcmcia/ray_cs.opts containing the
-following::
-
-  #### start of /etc/pcmcia/ray_cs.opts ###################
-  # Configuration options for Raylink Wireless LAN PCMCIA card
-  device "ray_cs"
-    class "network" module "misc/ray_cs"
-
-  card "RayLink PC Card WLAN Adapter"
-    manfid 0x01a6, 0x0000
-    bind "ray_cs"
-
-  module "misc/ray_cs" opts ""
-  #### end of /etc/pcmcia/ray_cs.opts #####################
-
-
-To join an existing network with
-different parameters, contact the network administrator for the
-configuration information, and edit /etc/pcmcia/ray_cs.opts.
-Add the parameters below between the empty quotes.
-
-Parameters for ray_cs driver which may be specified in ray_cs.opts:
-
-=============== =============== =============================================
-bc              integer         0 = normal mode (802.11 timing),
-				1 = slow down inter frame timing to allow
-				operation with older breezecom access
-				points.
-
-beacon_period	integer         beacon period in Kilo-microseconds,
-
-				legal values = must be integer multiple
-				of hop dwell
-
-				default = 256
-
-country         integer         1 = USA (default),
-				2 = Europe,
-				3 = Japan,
-				4 = Korea,
-				5 = Spain,
-				6 = France,
-				7 = Israel,
-				8 = Australia
-
-essid		string		ESS ID - network name to join
-
-				string with maximum length of 32 chars
-				default value = "ADHOC_ESSID"
-
-hop_dwell	integer         hop dwell time in Kilo-microseconds
-
-				legal values = 16,32,64,128(default),256
-
-irq_mask	integer         linux standard 16 bit value 1bit/IRQ
-
-				lsb is IRQ 0, bit 1 is IRQ 1 etc.
-				Used to restrict choice of IRQ's to use.
-				Recommended method for controlling
-				interrupts is in /etc/pcmcia/config.opts
-
-net_type	integer		0 (default) = adhoc network,
-				1 = infrastructure
-
-phy_addr	string          string containing new MAC address in
-				hex, must start with x eg
-				x00008f123456
-
-psm		integer         0 = continuously active,
-				1 = power save mode (not useful yet)
-
-pc_debug	integer		(0-5) larger values for more verbose
-				logging.  Replaces ray_debug.
-
-ray_debug	integer		Replaced with pc_debug
-
-ray_mem_speed   integer         defaults to 500
-
-sniffer         integer         0 = not sniffer (default),
-				1 = sniffer which can be used to record all
-				network traffic using tcpdump or similar,
-				but no normal network use is allowed.
-
-translate	integer		0 = no translation (encapsulate frames),
-				1 = translation    (RFC1042/802.1)
-=============== =============== =============================================
-
-More on sniffer mode:
-
-tcpdump does not understand 802.11 headers, so it can't
-interpret the contents, but it can record to a file.  This is only
-useful for debugging 802.11 lowlevel protocols that are not visible to
-linux.  If you want to watch ftp xfers, or do similar things, you
-don't need to use sniffer mode.  Also, some packet types are never
-sent up by the card, so you will never see them (ack, rts, cts, probe
-etc.)  There is a simple program (showcap) included in the ray_cs
-package which parses the 802.11 headers.
-
-Known Problems and missing features
-
-	Does not work with non x86
-
-	Does not work with SMP
-
-	Support for defragmenting frames is not yet debugged, and in
-	fact is known to not work.  I have never encountered a net set
-	up to fragment, but still, it should be fixed.
-
-	The ioctl support is incomplete.  The hardware address cannot be set
-	using ifconfig yet.  If a different hardware address is needed, it may
-	be set using the phy_addr parameter in ray_cs.opts.  This requires
-	a card insertion to take effect.

MAINTAINERS

@@ -2405,7 +2405,6 @@ F:	drivers/memory/atmel*
 F:	drivers/watchdog/sama5d4_wdt.c
 F:	include/soc/at91/
 X:	drivers/input/touchscreen/atmel_mxt_ts.c
-X:	drivers/net/wireless/atmel/
 N:	at91
 N:	atmel
 
@@ -3309,13 +3308,6 @@ T:	git git://github.com/ndyer/linux.git
 F:	Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
 F:	drivers/input/touchscreen/atmel_mxt_ts.c
 
-ATMEL WIRELESS DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-W:	http://www.thekelleys.org.uk/atmel
-W:	http://atmelwlandriver.sourceforge.net/
-F:	drivers/net/wireless/atmel/atmel*
-
 ATOMIC INFRASTRUCTURE
 M:	Will Deacon <will@kernel.org>
 M:	Peter Zijlstra <peterz@infradead.org>
@@ -9709,11 +9701,6 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
 F:	drivers/iio/pressure/mprls0025pa.c
 
-HOST AP DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Obsolete
-F:	drivers/net/wireless/intersil/hostap/
-
 HP BIOSCFG DRIVER
 M:	Jorge Lopez <jorge.lopez2@hp.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -11017,6 +11004,7 @@ F:	drivers/net/wireless/intel/iwlegacy/
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
 M:	Gregory Greenman <gregory.greenman@intel.com>
+M:	Miri Korenblit <miriam.rachel.korenblit@intel.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 W:	https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi
@@ -16269,13 +16257,6 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux.git
 F:	Documentation/filesystems/orangefs.rst
 F:	fs/orangefs/
 
-ORINOCO DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-W:	https://wireless.wiki.kernel.org/en/users/Drivers/orinoco
-W:	http://www.nongnu.org/orinoco/
-F:	drivers/net/wireless/intersil/orinoco/
-
 OV2659 OMNIVISION SENSOR DRIVER
 M:	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -18169,11 +18150,6 @@ F:	drivers/ras/
 F:	include/linux/ras.h
 F:	include/ras/ras_event.h
 
-RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-F:	drivers/net/wireless/legacy/ray*
-
 RC-CORE / LIRC FRAMEWORK
 M:	Sean Young <sean@mess.org>
 L:	linux-media@vger.kernel.org
@@ -22680,11 +22656,6 @@ F:	drivers/usb/gadget/function/*uvc*
 F:	drivers/usb/gadget/legacy/webcam.c
 F:	include/uapi/linux/usb/g_uvc.h
 
-USB WIRELESS RNDIS DRIVER (rndis_wlan)
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-F:	drivers/net/wireless/legacy/rndis_wlan.c
-
 USB XHCI DRIVER
 M:	Mathias Nyman <mathias.nyman@intel.com>
 L:	linux-usb@vger.kernel.org
@@ -22692,12 +22663,6 @@ S:	Supported
 F:	drivers/usb/host/pci-quirks*
 F:	drivers/usb/host/xhci*
 
-USB ZD1201 DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-W:	http://linux-lc100020.sourceforge.net
-F:	drivers/net/wireless/zydas/zd1201.*
-
 USER DATAGRAM PROTOCOL (UDP)
 M:	Willem de Bruijn <willemdebruijn.kernel@gmail.com>
 S:	Maintained
@@ -23499,11 +23464,6 @@ M:	Miloslav Trmac <mitr@volny.cz>
 S:	Maintained
 F:	drivers/input/misc/wistron_btns.c
 
-WL3501 WIRELESS PCMCIA CARD DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-F:	drivers/net/wireless/legacy/wl3501*
-
 WMI BINARY MOF DRIVER
 M:	Armin Wolf <W_Armin@gmx.de>
 R:	Thomas Weißschuh <linux@weissschuh.net>

drivers/net/wireless/Kconfig

@@ -22,7 +22,6 @@ source "drivers/net/wireless/admtek/Kconfig"
 source "drivers/net/wireless/ath/Kconfig"
 source "drivers/net/wireless/atmel/Kconfig"
 source "drivers/net/wireless/broadcom/Kconfig"
-source "drivers/net/wireless/cisco/Kconfig"
 source "drivers/net/wireless/intel/Kconfig"
 source "drivers/net/wireless/intersil/Kconfig"
 source "drivers/net/wireless/marvell/Kconfig"
@@ -38,8 +37,6 @@ source "drivers/net/wireless/ti/Kconfig"
 source "drivers/net/wireless/zydas/Kconfig"
 source "drivers/net/wireless/quantenna/Kconfig"
 
-source "drivers/net/wireless/legacy/Kconfig"
-
 source "drivers/net/wireless/virtual/Kconfig"
 
 endif # WLAN

drivers/net/wireless/Makefile

@@ -7,7 +7,6 @@ obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/
 obj-$(CONFIG_WLAN_VENDOR_ATH) += ath/
 obj-$(CONFIG_WLAN_VENDOR_ATMEL) += atmel/
 obj-$(CONFIG_WLAN_VENDOR_BROADCOM) += broadcom/
-obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/
 obj-$(CONFIG_WLAN_VENDOR_INTEL) += intel/
 obj-$(CONFIG_WLAN_VENDOR_INTERSIL) += intersil/
 obj-$(CONFIG_WLAN_VENDOR_MARVELL) += marvell/
@@ -23,5 +22,4 @@ obj-$(CONFIG_WLAN_VENDOR_ST) += st/
 obj-$(CONFIG_WLAN_VENDOR_TI) += ti/
 obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/
 
-obj-$(CONFIG_WLAN) += legacy/
 obj-$(CONFIG_WLAN) += virtual/

drivers/net/wireless/atmel/Kconfig

@@ -12,41 +12,6 @@ config WLAN_VENDOR_ATMEL
 
 if WLAN_VENDOR_ATMEL
 
-config ATMEL
-	tristate "Atmel at76c50x chipset  802.11b support"
-	depends on CFG80211 && (PCI || PCMCIA) && HAS_IOPORT
-	select WIRELESS_EXT
-	select WEXT_PRIV
-	select FW_LOADER
-	select CRC32
-	help
-	  A driver 802.11b wireless cards based on the Atmel fast-vnet
-	  chips. This driver supports standard Linux wireless extensions.
-
-	  Many  cards based on this chipset do not have flash memory
-	  and need their firmware loaded at start-up. If yours is
-	  one of these, you will need to provide a firmware image
-	  to be loaded into the card by the driver. The Atmel
-	  firmware package can be downloaded from
-	  <http://www.thekelleys.org.uk/atmel>
-
-config PCI_ATMEL
-	tristate "Atmel at76c506 PCI cards"
-	depends on ATMEL && PCI
-	help
-	  Enable support for PCI and mini-PCI cards containing the
-	  Atmel at76c506 chip.
-
-config PCMCIA_ATMEL
-	tristate "Atmel at76c502/at76c504 PCMCIA cards"
-	depends on ATMEL && PCMCIA
-	select WIRELESS_EXT
-	select FW_LOADER
-	select CRC32
-	help
-	  Enable support for PCMCIA cards containing the
-	  Atmel at76c502 and at76c504 chips.
-
 config AT76C50X_USB
 	tristate "Atmel at76c503/at76c505/at76c505a USB cards"
 	depends on MAC80211 && USB

drivers/net/wireless/atmel/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_ATMEL)             += atmel.o
-obj-$(CONFIG_PCI_ATMEL)         += atmel_pci.o 
-obj-$(CONFIG_PCMCIA_ATMEL)      += atmel_cs.o
-
 obj-$(CONFIG_AT76C50X_USB)      += at76c50x-usb.o

drivers/net/wireless/atmel/atmel.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*** -*- linux-c -*- **********************************************************
-
-     Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
-
-         Copyright 2005 Dan Williams and Red Hat, Inc.
-
-
-******************************************************************************/
-
-#ifndef _ATMEL_H
-#define _ATMEL_H
-
-typedef enum {
-	ATMEL_FW_TYPE_NONE = 0,
-	ATMEL_FW_TYPE_502,
-	ATMEL_FW_TYPE_502D,
-	ATMEL_FW_TYPE_502E,
-	ATMEL_FW_TYPE_502_3COM,
-	ATMEL_FW_TYPE_504,
-	ATMEL_FW_TYPE_504_2958,
-	ATMEL_FW_TYPE_504A_2958,
-	ATMEL_FW_TYPE_506
-} AtmelFWType;
-
-struct net_device *init_atmel_card(unsigned short, unsigned long, const AtmelFWType, struct device *, 
-				    int (*present_func)(void *), void * );
-void stop_atmel_card( struct net_device *);
-int atmel_open( struct net_device * );
-
-#endif

drivers/net/wireless/atmel/atmel_cs.c

-/*** -*- linux-c -*- **********************************************************
-
-     Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
-
-        Copyright 2000-2001 ATMEL Corporation.
-        Copyright 2003 Simon Kelley.
-
-    This code was developed from version 2.1.1 of the Atmel drivers,
-    released by Atmel corp. under the GPL in December 2002. It also
-    includes code from the Linux aironet drivers (C) Benjamin Reed,
-    and the Linux PCMCIA package, (C) David Hinds.
-
-    For all queries about this code, please contact the current author,
-    Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This software is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with Atmel wireless lan drivers; if not, see
-    <http://www.gnu.org/licenses/>.
-
-******************************************************************************/
-
-#ifdef __IN_PCMCIA_PACKAGE__
-#include <pcmcia/k_compat.h>
-#endif
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/netdevice.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/ciscode.h>
-
-#include <asm/io.h>
-#include <linux/wireless.h>
-
-#include "atmel.h"
-
-
-/*====================================================================*/
-
-MODULE_AUTHOR("Simon Kelley");
-MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
-MODULE_LICENSE("GPL");
-
-/*====================================================================*/
-
-static int atmel_config(struct pcmcia_device *link);
-static void atmel_release(struct pcmcia_device *link);
-
-static void atmel_detach(struct pcmcia_device *p_dev);
-
-struct local_info {
-	struct net_device *eth_dev;
-};
-
-static int atmel_probe(struct pcmcia_device *p_dev)
-{
-	struct local_info *local;
-	int ret;
-
-	dev_dbg(&p_dev->dev, "atmel_attach()\n");
-
-	/* Allocate space for private device-specific data */
-	local = kzalloc(sizeof(*local), GFP_KERNEL);
-	if (!local)
-		return -ENOMEM;
-
-	p_dev->priv = local;
-
-	ret = atmel_config(p_dev);
-	if (ret)
-		goto err_free_priv;
-
-	return 0;
-
-err_free_priv:
-	kfree(p_dev->priv);
-	return ret;
-}
-
-static void atmel_detach(struct pcmcia_device *link)
-{
-	dev_dbg(&link->dev, "atmel_detach\n");
-
-	atmel_release(link);
-
-	kfree(link->priv);
-}
-
-/* Call-back function to interrogate PCMCIA-specific information
-   about the current existence of the card */
-static int card_present(void *arg)
-{
-	struct pcmcia_device *link = (struct pcmcia_device *)arg;
-
-	if (pcmcia_dev_present(link))
-		return 1;
-
-	return 0;
-}
-
-static int atmel_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
-	if (p_dev->config_index == 0)
-		return -EINVAL;
-
-	return pcmcia_request_io(p_dev);
-}
-
-static int atmel_config(struct pcmcia_device *link)
-{
-	int ret;
-	const struct pcmcia_device_id *did;
-
-	did = dev_get_drvdata(&link->dev);
-
-	dev_dbg(&link->dev, "atmel_config\n");
-
-	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
-		CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
-
-	if (pcmcia_loop_config(link, atmel_config_check, NULL))
-		goto failed;
-
-	if (!link->irq) {
-		dev_err(&link->dev, "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
-		goto failed;
-	}
-
-	ret = pcmcia_enable_device(link);
-	if (ret)
-		goto failed;
-
-	((struct local_info *)link->priv)->eth_dev =
-		init_atmel_card(link->irq,
-				link->resource[0]->start,
-				did ? did->driver_info : ATMEL_FW_TYPE_NONE,
-				&link->dev,
-				card_present,
-				link);
-	if (!((struct local_info *)link->priv)->eth_dev)
-			goto failed;
-
-
-	return 0;
-
- failed:
-	atmel_release(link);
-	return -ENODEV;
-}
-
-static void atmel_release(struct pcmcia_device *link)
-{
-	struct net_device *dev = ((struct local_info *)link->priv)->eth_dev;
-
-	dev_dbg(&link->dev, "atmel_release\n");
-
-	if (dev)
-		stop_atmel_card(dev);
-	((struct local_info *)link->priv)->eth_dev = NULL;
-
-	pcmcia_disable_device(link);
-}
-
-static int atmel_suspend(struct pcmcia_device *link)
-{
-	struct local_info *local = link->priv;
-
-	netif_device_detach(local->eth_dev);
-
-	return 0;
-}
-
-static int atmel_resume(struct pcmcia_device *link)
-{
-	struct local_info *local = link->priv;
-
-	atmel_open(local->eth_dev);
-	netif_device_attach(local->eth_dev);
-
-	return 0;
-}
-
-/*====================================================================*/
-/* We use the driver_info field to store the correct firmware type for a card. */
-
-#define PCMCIA_DEVICE_MANF_CARD_INFO(manf, card, info) { \
-	.match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
-			PCMCIA_DEV_ID_MATCH_CARD_ID, \
-	.manf_id = (manf), \
-	.card_id = (card), \
-        .driver_info = (kernel_ulong_t)(info), }
-
-#define PCMCIA_DEVICE_PROD_ID12_INFO(v1, v2, vh1, vh2, info) { \
-	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
-			PCMCIA_DEV_ID_MATCH_PROD_ID2, \
-	.prod_id = { (v1), (v2), NULL, NULL }, \
-	.prod_id_hash = { (vh1), (vh2), 0, 0 }, \
-        .driver_info = (kernel_ulong_t)(info), }
-
-static const struct pcmcia_device_id atmel_ids[] = {
-	PCMCIA_DEVICE_MANF_CARD_INFO(0x0101, 0x0620, ATMEL_FW_TYPE_502_3COM),
-	PCMCIA_DEVICE_MANF_CARD_INFO(0x0101, 0x0696, ATMEL_FW_TYPE_502_3COM),
-	PCMCIA_DEVICE_MANF_CARD_INFO(0x01bf, 0x3302, ATMEL_FW_TYPE_502E),
-	PCMCIA_DEVICE_MANF_CARD_INFO(0xd601, 0x0007, ATMEL_FW_TYPE_502),
-	PCMCIA_DEVICE_PROD_ID12_INFO("11WAVE", "11WP611AL-E", 0x9eb2da1f, 0xc9a0d3f9, ATMEL_FW_TYPE_502E),
-	PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR", 0xabda4164, 0x41b37e1f, ATMEL_FW_TYPE_502),
-	PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR_D", 0xabda4164, 0x3675d704, ATMEL_FW_TYPE_502D),
-	PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C502AR_E", 0xabda4164, 0x4172e792, ATMEL_FW_TYPE_502E),
-	PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504_R", 0xabda4164, 0x917f3d72, ATMEL_FW_TYPE_504_2958),
-	PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504", 0xabda4164, 0x5040670a, ATMEL_FW_TYPE_504),
-	PCMCIA_DEVICE_PROD_ID12_INFO("ATMEL", "AT76C504A", 0xabda4164, 0xe15ed87f, ATMEL_FW_TYPE_504A_2958),
-	PCMCIA_DEVICE_PROD_ID12_INFO("BT", "Voyager 1020 Laptop Adapter", 0xae49b86a, 0x1e957cd5, ATMEL_FW_TYPE_502),
-	PCMCIA_DEVICE_PROD_ID12_INFO("CNet", "CNWLC 11Mbps Wireless PC Card V-5", 0xbc477dde, 0x502fae6b, ATMEL_FW_TYPE_502E),
-	PCMCIA_DEVICE_PROD_ID12_INFO("IEEE 802.11b", "Wireless LAN PC Card", 0x5b878724, 0x122f1df6, ATMEL_FW_TYPE_502),
-	PCMCIA_DEVICE_PROD_ID12_INFO("IEEE 802.11b", "Wireless LAN Card S", 0x5b878724, 0x5fba533a, ATMEL_FW_TYPE_504_2958),
-	PCMCIA_DEVICE_PROD_ID12_INFO("OEM", "11Mbps Wireless LAN PC Card V-3", 0xfea54c90, 0x1c5b0f68, ATMEL_FW_TYPE_502),
-	PCMCIA_DEVICE_PROD_ID12_INFO("SMC", "2632W", 0xc4f8b18b, 0x30f38774, ATMEL_FW_TYPE_502D),
-	PCMCIA_DEVICE_PROD_ID12_INFO("SMC", "2632W-V2", 0xc4f8b18b, 0x172d1377, ATMEL_FW_TYPE_502),
-	PCMCIA_DEVICE_PROD_ID12_INFO("Wireless", "PC_CARD", 0xa407ecdd, 0x119f6314, ATMEL_FW_TYPE_502D),
-	PCMCIA_DEVICE_PROD_ID12_INFO("WLAN", "802.11b PC CARD", 0x575c516c, 0xb1f6dbc4, ATMEL_FW_TYPE_502D),
-	PCMCIA_DEVICE_PROD_ID12_INFO("LG", "LW2100N", 0xb474d43a, 0x6b1fec94, ATMEL_FW_TYPE_502E),
-	PCMCIA_DEVICE_NULL
-};
-
-MODULE_DEVICE_TABLE(pcmcia, atmel_ids);
-
-static struct pcmcia_driver atmel_driver = {
-	.owner		= THIS_MODULE,
-	.name		= "atmel_cs",
-	.probe          = atmel_probe,
-	.remove		= atmel_detach,
-	.id_table	= atmel_ids,
-	.suspend	= atmel_suspend,
-	.resume		= atmel_resume,
-};
-module_pcmcia_driver(atmel_driver);
-
-/*
-    This program is free software; you can redistribute it and/or
-    modify it under the terms of the GNU General Public License
-    as published by the Free Software Foundation; either version 2
-    of the License, or (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    In addition:
-
-    Redistribution and use in source and binary forms, with or without
-    modification, are permitted provided that the following conditions
-    are met:
-
-    1. Redistributions of source code must retain the above copyright
-       notice, this list of conditions and the following disclaimer.
-    2. Redistributions in binary form must reproduce the above copyright
-       notice, this list of conditions and the following disclaimer in the
-       documentation and/or other materials provided with the distribution.
-    3. The name of the author may not be used to endorse or promote
-       products derived from this software without specific prior written
-       permission.
-
-    THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-    IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-    ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
-    INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-    SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-    HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-    STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-    IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-    POSSIBILITY OF SUCH DAMAGE.
-*/

drivers/net/wireless/atmel/atmel_pci.c

-// SPDX-License-Identifier: GPL-2.0-or-later
-/*** -*- linux-c -*- **********************************************************
-
-     Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
-
-         Copyright 2004 Simon Kelley.
-
-
-******************************************************************************/
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include "atmel.h"
-
-MODULE_AUTHOR("Simon Kelley");
-MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
-MODULE_LICENSE("GPL");
-
-static const struct pci_device_id card_ids[] = {
-	{ 0x1114, 0x0506, PCI_ANY_ID, PCI_ANY_ID },
-	{ 0, }
-};
-
-MODULE_DEVICE_TABLE(pci, card_ids);
-
-static int atmel_pci_probe(struct pci_dev *, const struct pci_device_id *);
-static void atmel_pci_remove(struct pci_dev *);
-
-static struct pci_driver atmel_driver = {
-	.name     = "atmel",
-	.id_table = card_ids,
-	.probe    = atmel_pci_probe,
-	.remove   = atmel_pci_remove,
-};
-
-
-static int atmel_pci_probe(struct pci_dev *pdev,
-				     const struct pci_device_id *pent)
-{
-	struct net_device *dev;
-
-	if (pci_enable_device(pdev))
-		return -ENODEV;
-
-	pci_set_master(pdev);
-
-	dev = init_atmel_card(pdev->irq, pdev->resource[1].start,
-			      ATMEL_FW_TYPE_506,
-			      &pdev->dev, NULL, NULL);
-	if (!dev) {
-		pci_disable_device(pdev);
-		return -ENODEV;
-	}
-
-	pci_set_drvdata(pdev, dev);
-	return 0;
-}
-
-static void atmel_pci_remove(struct pci_dev *pdev)
-{
-	stop_atmel_card(pci_get_drvdata(pdev));
-}
-
-module_pci_driver(atmel_driver);

drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c

@@ -866,7 +866,7 @@ struct wireless_dev *brcmf_apsta_add_vif(struct wiphy *wiphy, const char *name,
 		goto fail;
 	}
 
-	strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1);
+	strscpy(ifp->ndev->name, name, sizeof(ifp->ndev->name));
 	err = brcmf_net_attach(ifp, true);
 	if (err) {
 		bphy_err(drvr, "Registering netdevice failed\n");

drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c

@@ -2334,7 +2334,7 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
 		goto fail;
 	}
 
-	strncpy(ifp->ndev->name, name, sizeof(ifp->ndev->name) - 1);
+	strscpy(ifp->ndev->name, name, sizeof(ifp->ndev->name));
 	ifp->ndev->name_assign_type = name_assign_type;
 	err = brcmf_net_attach(ifp, true);
 	if (err) {

drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c

@@ -341,7 +341,7 @@ struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc)
 	/* store the country code for passing up as a regulatory hint */
 	wlc_cm->world_regd = brcms_world_regd(ccode, ccode_len);
 	if (brcms_c_country_valid(ccode))
-		strncpy(wlc->pub->srom_ccode, ccode, ccode_len);
+		memcpy(wlc->pub->srom_ccode, ccode, ccode_len);
 
 	/*
 	 * If no custom world domain is found in the SROM, use the
@@ -354,10 +354,10 @@ struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc)
 	}
 
 	/* save default country for exiting 11d regulatory mode */
-	strncpy(wlc->country_default, ccode, ccode_len);
+	memcpy(wlc->country_default, ccode, ccode_len);
 
 	/* initialize autocountry_default to driver default */
-	strncpy(wlc->autocountry_default, ccode, ccode_len);
+	memcpy(wlc->autocountry_default, ccode, ccode_len);
 
 	brcms_c_set_country(wlc_cm, wlc_cm->world_regd);
 

drivers/net/wireless/broadcom/brcm80211/brcmsmac/dma.c

@@ -584,8 +584,7 @@ struct dma_pub *dma_attach(char *name, struct brcms_c_info *wlc,
 		      rxextheadroom, nrxpost, rxoffset, txregbase, rxregbase);
 
 	/* make a private copy of our callers name */
-	strncpy(di->name, name, MAXNAMEL);
-	di->name[MAXNAMEL - 1] = '\0';
+	strscpy(di->name, name, sizeof(di->name));
 
 	di->dmadev = core->dma_dev;
 

drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c

@@ -5551,8 +5551,8 @@ int brcms_c_module_register(struct brcms_pub *pub,
 	/* find an empty entry and just add, no duplication check! */
 	for (i = 0; i < BRCMS_MAXMODULES; i++) {
 		if (wlc->modulecb[i].name[0] == '\0') {
-			strncpy(wlc->modulecb[i].name, name,
-				sizeof(wlc->modulecb[i].name) - 1);
+			strscpy(wlc->modulecb[i].name, name,
+				sizeof(wlc->modulecb[i].name));
 			wlc->modulecb[i].hdl = hdl;
 			wlc->modulecb[i].down_fn = d_fn;
 			return 0;

drivers/net/wireless/cisco/Kconfig

-# SPDX-License-Identifier: GPL-2.0-only
-config WLAN_VENDOR_CISCO
-	bool "Cisco devices"
-	default y
-	help
-	  If you have a wireless card belonging to this class, say Y.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all the
-	  questions about these cards. If you say Y, you will be asked for
-	  your specific card in the following questions.
-
-if WLAN_VENDOR_CISCO
-
-config AIRO
-	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
-	depends on CFG80211 && (PCI || BROKEN)
-	select WIRELESS_EXT
-	select CRYPTO
-	select CRYPTO_SKCIPHER
-	select WEXT_SPY
-	select WEXT_PRIV
-	help
-	  This is the standard Linux driver to support Cisco/Aironet ISA and
-	  PCI 802.11 wireless cards.
-	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
-	  - with or without encryption) as well as card before the Cisco
-	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
-
-	  This driver support both the standard Linux Wireless Extensions
-	  and Cisco proprietary API, so both the Linux Wireless Tools and the
-	  Cisco Linux utilities can be used to configure the card.
-
-	  The driver can be compiled as a module and will be named "airo".
-
-config AIRO_CS
-	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
-	depends on CFG80211 && PCMCIA
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	select CRYPTO
-	select CRYPTO_AES
-	select CRYPTO_CTR
-	help
-	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
-	  802.11 wireless cards.  This driver is the same as the Aironet
-	  driver part of the Linux Pcmcia package.
-	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
-	  - with or without encryption) as well as card before the Cisco
-	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
-	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
-	  802.11b cards.
-
-	  This driver support both the standard Linux Wireless Extensions
-	  and Cisco proprietary API, so both the Linux Wireless Tools and the
-	  Cisco Linux utilities can be used to configure the card.
-
-endif # WLAN_VENDOR_CISCO

drivers/net/wireless/cisco/Makefile

-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_AIRO)		+= airo.o
-obj-$(CONFIG_AIRO_CS)		+= airo_cs.o airo.o

drivers/net/wireless/cisco/airo.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _AIRO_H_
-#define _AIRO_H_
-
-struct net_device *init_airo_card(unsigned short irq, int port, int is_pcmcia,
-				  struct device *dmdev);
-int reset_airo_card(struct net_device *dev);
-void stop_airo_card(struct net_device *dev, int freeres);
-
-#endif  /*  _AIRO_H_  */

drivers/net/wireless/cisco/airo_cs.c

-/*======================================================================
-
-    Aironet driver for 4500 and 4800 series cards
-
-    This code is released under both the GPL version 2 and BSD licenses.
-    Either license may be used.  The respective licenses are found at
-    the end of this file.
-
-    This code was developed by Benjamin Reed <breed@users.sourceforge.net>
-    including portions of which come from the Aironet PC4500
-    Developer's Reference Manual and used with permission.  Copyright
-    (C) 1999 Benjamin Reed.  All Rights Reserved.  Permission to use
-    code in the Developer's manual was granted for this driver by
-    Aironet.
-
-    In addition this module was derived from dummy_cs.
-    The initial developer of dummy_cs is David A. Hinds
-    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
-    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
-
-======================================================================*/
-
-#ifdef __IN_PCMCIA_PACKAGE__
-#include <pcmcia/k_compat.h>
-#endif
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/netdevice.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-#include <linux/io.h>
-
-#include "airo.h"
-
-
-/*====================================================================*/
-
-MODULE_AUTHOR("Benjamin Reed");
-MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet "
-		   "cards.  This is the module that links the PCMCIA card "
-		   "with the airo module.");
-MODULE_LICENSE("Dual BSD/GPL");
-
-/*====================================================================*/
-
-static int airo_config(struct pcmcia_device *link);
-static void airo_release(struct pcmcia_device *link);
-
-static void airo_detach(struct pcmcia_device *p_dev);
-
-struct local_info {
-	struct net_device *eth_dev;
-};
-
-static int airo_probe(struct pcmcia_device *p_dev)
-{
-	struct local_info *local;
-
-	dev_dbg(&p_dev->dev, "airo_attach()\n");
-
-	/* Allocate space for private device-specific data */
-	local = kzalloc(sizeof(*local), GFP_KERNEL);
-	if (!local)
-		return -ENOMEM;
-
-	p_dev->priv = local;
-
-	return airo_config(p_dev);
-} /* airo_attach */
-
-static void airo_detach(struct pcmcia_device *link)
-{
-	dev_dbg(&link->dev, "airo_detach\n");
-
-	airo_release(link);
-
-	if (((struct local_info *)link->priv)->eth_dev) {
-		stop_airo_card(((struct local_info *)link->priv)->eth_dev,
-			       0);
-	}
-	((struct local_info *)link->priv)->eth_dev = NULL;
-
-	kfree(link->priv);
-} /* airo_detach */
-
-static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
-	if (p_dev->config_index == 0)
-		return -EINVAL;
-
-	return pcmcia_request_io(p_dev);
-}
-
-
-static int airo_config(struct pcmcia_device *link)
-{
-	int ret;
-
-	dev_dbg(&link->dev, "airo_config\n");
-
-	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
-		CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
-
-	ret = pcmcia_loop_config(link, airo_cs_config_check, NULL);
-	if (ret)
-		goto failed;
-
-	if (!link->irq)
-		goto failed;
-
-	ret = pcmcia_enable_device(link);
-	if (ret)
-		goto failed;
-	((struct local_info *)link->priv)->eth_dev =
-		init_airo_card(link->irq,
-			       link->resource[0]->start, 1, &link->dev);
-	if (!((struct local_info *)link->priv)->eth_dev)
-		goto failed;
-
-	return 0;
-
- failed:
-	airo_release(link);
-	return -ENODEV;
-} /* airo_config */
-
-static void airo_release(struct pcmcia_device *link)
-{
-	dev_dbg(&link->dev, "airo_release\n");
-	pcmcia_disable_device(link);
-}
-
-static int airo_suspend(struct pcmcia_device *link)
-{
-	struct local_info *local = link->priv;
-
-	netif_device_detach(local->eth_dev);
-
-	return 0;
-}
-
-static int airo_resume(struct pcmcia_device *link)
-{
-	struct local_info *local = link->priv;
-
-	if (link->open) {
-		reset_airo_card(local->eth_dev);
-		netif_device_attach(local->eth_dev);
-	}
-
-	return 0;
-}
-
-static const struct pcmcia_device_id airo_ids[] = {
-	PCMCIA_DEVICE_MANF_CARD(0x015f, 0x000a),
-	PCMCIA_DEVICE_MANF_CARD(0x015f, 0x0005),
-	PCMCIA_DEVICE_MANF_CARD(0x015f, 0x0007),
-	PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0007),
-	PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, airo_ids);
-
-static struct pcmcia_driver airo_driver = {
-	.owner		= THIS_MODULE,
-	.name		= "airo_cs",
-	.probe		= airo_probe,
-	.remove		= airo_detach,
-	.id_table       = airo_ids,
-	.suspend	= airo_suspend,
-	.resume		= airo_resume,
-};
-module_pcmcia_driver(airo_driver);
-
-/*
-    This program is free software; you can redistribute it and/or
-    modify it under the terms of the GNU General Public License
-    as published by the Free Software Foundation; either version 2
-    of the License, or (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    In addition:
-
-    Redistribution and use in source and binary forms, with or without
-    modification, are permitted provided that the following conditions
-    are met:
-
-    1. Redistributions of source code must retain the above copyright
-       notice, this list of conditions and the following disclaimer.
-    2. Redistributions in binary form must reproduce the above copyright
-       notice, this list of conditions and the following disclaimer in the
-       documentation and/or other materials provided with the distribution.
-    3. The name of the author may not be used to endorse or promote
-       products derived from this software without specific prior written
-       permission.
-
-    THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-    IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-    ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
-    INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-    SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-    HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-    STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
-    IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-    POSSIBILITY OF SUCH DAMAGE.
-*/

drivers/net/wireless/intel/iwlegacy/4965-mac.c

@@ -4231,8 +4231,6 @@ il4965_rx_handle(struct il_priv *il)
 		fill_rx = 1;
 
 	while (i != r) {
-		int len;
-
 		rxb = rxq->queue[i];
 
 		/* If an RXB doesn't have a Rx queue slot associated with it,
@@ -4246,10 +4244,6 @@ il4965_rx_handle(struct il_priv *il)
 			       PAGE_SIZE << il->hw_params.rx_page_order,
 			       DMA_FROM_DEVICE);
 		pkt = rxb_addr(rxb);
-
-		len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
-		len += sizeof(u32);	/* account for status word */
-
 		reclaim = il_need_reclaim(il, pkt);
 
 		/* Based on type of command response or notification,

drivers/net/wireless/intersil/Kconfig

@@ -12,8 +12,6 @@ config WLAN_VENDOR_INTERSIL
 
 if WLAN_VENDOR_INTERSIL
 
-source "drivers/net/wireless/intersil/hostap/Kconfig"
-source "drivers/net/wireless/intersil/orinoco/Kconfig"
 source "drivers/net/wireless/intersil/p54/Kconfig"
 
 endif # WLAN_VENDOR_INTERSIL

drivers/net/wireless/intersil/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_HOSTAP)		+= hostap/
-obj-$(CONFIG_HERMES)		+= orinoco/
 obj-$(CONFIG_P54_COMMON)	+= p54/

drivers/net/wireless/intersil/hostap/Kconfig

-# SPDX-License-Identifier: GPL-2.0-only
-config HOSTAP
-	tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)"
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	select CRYPTO
-	select CRYPTO_MICHAEL_MIC
-	select CRC32
-	select LIB80211
-	select LIB80211_CRYPT_WEP
-	select LIB80211_CRYPT_TKIP
-	select LIB80211_CRYPT_CCMP
-	help
-	Shared driver code for IEEE 802.11b wireless cards based on
-	Intersil Prism2/2.5/3 chipset. This driver supports so called
-	Host AP mode that allows the card to act as an IEEE 802.11
-	access point.
-
-	See <http://hostap.epitest.fi/> for more information about the
-	Host AP driver configuration and tools. This site includes
-	information and tools (hostapd and wpa_supplicant) for WPA/WPA2
-	support.
-
-	This option includes the base Host AP driver code that is shared by
-	different hardware models. You will also need to enable support for
-	PLX/PCI/CS version of the driver to actually use the driver.
-
-	The driver can be compiled as a module and it will be called
-	hostap.
-
-config HOSTAP_FIRMWARE
-	bool "Support downloading firmware images with Host AP driver"
-	depends on HOSTAP
-	help
-	Configure Host AP driver to include support for firmware image
-	download. This option by itself only enables downloading to the
-	volatile memory, i.e. the card RAM. This option is required to
-	support cards that don't have firmware in flash, such as D-Link
-	DWL-520 rev E and D-Link DWL-650 rev P.
-
-	Firmware image downloading needs a user space tool, prism2_srec.
-	It is available from http://hostap.epitest.fi/.
-
-config HOSTAP_FIRMWARE_NVRAM
-	bool "Support for non-volatile firmware download"
-	depends on HOSTAP_FIRMWARE
-	help
-	Allow Host AP driver to write firmware images to the non-volatile
-	card memory, i.e. flash memory that survives power cycling.
-	Enable this option if you want to be able to change card firmware
-	permanently.
-
-	Firmware image downloading needs a user space tool, prism2_srec.
-	It is available from http://hostap.epitest.fi/.
-
-config HOSTAP_PLX
-	tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors"
-	depends on PCI && HOSTAP && HAS_IOPORT
-	help
-	Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based
-	PCI adaptors.
-
-	"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
-	driver and its help text includes more information about the Host AP
-	driver.
-
-	The driver can be compiled as a module and will be named
-	hostap_plx.
-
-config HOSTAP_PCI
-	tristate "Host AP driver for Prism2.5 PCI adaptors"
-	depends on PCI && HOSTAP
-	help
-	Host AP driver's version for Prism2.5 PCI adaptors.
-
-	"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
-	driver and its help text includes more information about the Host AP
-	driver.
-
-	The driver can be compiled as a module and will be named
-	hostap_pci.
-
-config HOSTAP_CS
-	tristate "Host AP driver for Prism2/2.5/3 PC Cards"
-	depends on PCMCIA && HOSTAP
-	help
-	Host AP driver's version for Prism2/2.5/3 PC Cards.
-
-	"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
-	driver and its help text includes more information about the Host AP
-	driver.
-
-	The driver can be compiled as a module and will be named
-	hostap_cs.

drivers/net/wireless/intersil/hostap/Makefile

-# SPDX-License-Identifier: GPL-2.0
-hostap-y := hostap_80211_rx.o hostap_80211_tx.o hostap_ap.o hostap_info.o \
-            hostap_ioctl.o hostap_main.o hostap_proc.o 
-obj-$(CONFIG_HOSTAP) += hostap.o
-
-obj-$(CONFIG_HOSTAP_CS) += hostap_cs.o
-obj-$(CONFIG_HOSTAP_PLX) += hostap_plx.o
-obj-$(CONFIG_HOSTAP_PCI) += hostap_pci.o

drivers/net/wireless/intersil/hostap/hostap.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef HOSTAP_H
-#define HOSTAP_H
-
-#include <linux/ethtool.h>
-#include <linux/kernel.h>
-
-#include "hostap_wlan.h"
-#include "hostap_ap.h"
-
-static const long __maybe_unused freq_list[] = {
-	2412, 2417, 2422, 2427, 2432, 2437, 2442,
-	2447, 2452, 2457, 2462, 2467, 2472, 2484
-};
-#define FREQ_COUNT ARRAY_SIZE(freq_list)
-
-/* hostap.c */
-
-extern struct proc_dir_entry *hostap_proc;
-
-u16 hostap_tx_callback_register(local_info_t *local,
-				void (*func)(struct sk_buff *, int ok, void *),
-				void *data);
-int hostap_tx_callback_unregister(local_info_t *local, u16 idx);
-int hostap_set_word(struct net_device *dev, int rid, u16 val);
-int hostap_set_string(struct net_device *dev, int rid, const char *val);
-u16 hostap_get_porttype(local_info_t *local);
-int hostap_set_encryption(local_info_t *local);
-int hostap_set_antsel(local_info_t *local);
-int hostap_set_roaming(local_info_t *local);
-int hostap_set_auth_algs(local_info_t *local);
-void hostap_dump_rx_header(const char *name,
-			   const struct hfa384x_rx_frame *rx);
-void hostap_dump_tx_header(const char *name,
-			   const struct hfa384x_tx_frame *tx);
-extern const struct header_ops hostap_80211_ops;
-int hostap_80211_get_hdrlen(__le16 fc);
-struct net_device_stats *hostap_get_stats(struct net_device *dev);
-void hostap_setup_dev(struct net_device *dev, local_info_t *local,
-		      int type);
-void hostap_set_multicast_list_queue(struct work_struct *work);
-int hostap_set_hostapd(local_info_t *local, int val, int rtnl_locked);
-int hostap_set_hostapd_sta(local_info_t *local, int val, int rtnl_locked);
-void hostap_cleanup(local_info_t *local);
-void hostap_cleanup_handler(void *data);
-struct net_device * hostap_add_interface(struct local_info *local,
-					 int type, int rtnl_locked,
-					 const char *prefix, const char *name);
-void hostap_remove_interface(struct net_device *dev, int rtnl_locked,
-			     int remove_from_list);
-int prism2_update_comms_qual(struct net_device *dev);
-int prism2_sta_send_mgmt(local_info_t *local, u8 *dst, u16 stype,
-			 u8 *body, size_t bodylen);
-int prism2_sta_deauth(local_info_t *local, u16 reason);
-int prism2_wds_add(local_info_t *local, u8 *remote_addr,
-		   int rtnl_locked);
-int prism2_wds_del(local_info_t *local, u8 *remote_addr,
-		   int rtnl_locked, int do_not_remove);
-
-
-/* hostap_ap.c */
-
-int ap_control_add_mac(struct mac_restrictions *mac_restrictions, u8 *mac);
-int ap_control_del_mac(struct mac_restrictions *mac_restrictions, u8 *mac);
-void ap_control_flush_macs(struct mac_restrictions *mac_restrictions);
-int ap_control_kick_mac(struct ap_data *ap, struct net_device *dev, u8 *mac);
-void ap_control_kickall(struct ap_data *ap);
-void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent,
-			 struct lib80211_crypt_data ***crypt);
-int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[],
-			   struct iw_quality qual[], int buf_size,
-			   int aplist);
-int prism2_ap_translate_scan(struct net_device *dev,
-			     struct iw_request_info *info, char *buffer);
-int prism2_hostapd(struct ap_data *ap, struct prism2_hostapd_param *param);
-
-
-/* hostap_proc.c */
-
-void hostap_init_proc(local_info_t *local);
-void hostap_remove_proc(local_info_t *local);
-
-
-/* hostap_info.c */
-
-void hostap_info_init(local_info_t *local);
-void hostap_info_process(local_info_t *local, struct sk_buff *skb);
-
-
-/* hostap_ioctl.c */
-
-extern const struct iw_handler_def hostap_iw_handler_def;
-extern const struct ethtool_ops prism2_ethtool_ops;
-
-int hostap_siocdevprivate(struct net_device *dev, struct ifreq *ifr,
-			  void __user *data, int cmd);
-
-#endif /* HOSTAP_H */

drivers/net/wireless/intersil/hostap/hostap_80211.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef HOSTAP_80211_H
-#define HOSTAP_80211_H
-
-#include <linux/types.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-
-struct hostap_ieee80211_mgmt {
-	__le16 frame_control;
-	__le16 duration;
-	u8 da[6];
-	u8 sa[6];
-	u8 bssid[6];
-	__le16 seq_ctrl;
-	union {
-		struct {
-			__le16 auth_alg;
-			__le16 auth_transaction;
-			__le16 status_code;
-			/* possibly followed by Challenge text */
-			u8 variable[0];
-		} __packed auth;
-		struct {
-			__le16 reason_code;
-		} __packed deauth;
-		struct {
-			__le16 capab_info;
-			__le16 listen_interval;
-			/* followed by SSID and Supported rates */
-			u8 variable[0];
-		} __packed assoc_req;
-		struct {
-			__le16 capab_info;
-			__le16 status_code;
-			__le16 aid;
-			/* followed by Supported rates */
-			u8 variable[0];
-		} __packed assoc_resp, reassoc_resp;
-		struct {
-			__le16 capab_info;
-			__le16 listen_interval;
-			u8 current_ap[6];
-			/* followed by SSID and Supported rates */
-			u8 variable[0];
-		} __packed reassoc_req;
-		struct {
-			__le16 reason_code;
-		} __packed disassoc;
-		struct {
-		} __packed probe_req;
-		struct {
-			u8 timestamp[8];
-			__le16 beacon_int;
-			__le16 capab_info;
-			/* followed by some of SSID, Supported rates,
-			 * FH Params, DS Params, CF Params, IBSS Params, TIM */
-			u8 variable[0];
-		} __packed beacon, probe_resp;
-	} u;
-} __packed;
-
-
-#define IEEE80211_MGMT_HDR_LEN 24
-#define IEEE80211_DATA_HDR3_LEN 24
-#define IEEE80211_DATA_HDR4_LEN 30
-
-
-struct hostap_80211_rx_status {
-	u32 mac_time;
-	u8 signal;
-	u8 noise;
-	u16 rate; /* in 100 kbps */
-};
-
-/* prism2_rx_80211 'type' argument */
-enum {
-	PRISM2_RX_MONITOR, PRISM2_RX_MGMT, PRISM2_RX_NON_ASSOC,
-	PRISM2_RX_NULLFUNC_ACK
-};
-
-int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb,
-		    struct hostap_80211_rx_status *rx_stats, int type);
-void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb,
-		     struct hostap_80211_rx_status *rx_stats);
-void hostap_dump_rx_80211(const char *name, struct sk_buff *skb,
-			  struct hostap_80211_rx_status *rx_stats);
-
-void hostap_dump_tx_80211(const char *name, struct sk_buff *skb);
-netdev_tx_t hostap_data_start_xmit(struct sk_buff *skb,
-				   struct net_device *dev);
-netdev_tx_t hostap_mgmt_start_xmit(struct sk_buff *skb,
-				   struct net_device *dev);
-netdev_tx_t hostap_master_start_xmit(struct sk_buff *skb,
-				     struct net_device *dev);
-
-#endif /* HOSTAP_80211_H */

drivers/net/wireless/intersil/hostap/hostap_ap.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef HOSTAP_AP_H
-#define HOSTAP_AP_H
-
-#include "hostap_80211.h"
-
-/* AP data structures for STAs */
-
-/* maximum number of frames to buffer per STA */
-#define STA_MAX_TX_BUFFER 32
-
-/* STA flags */
-#define WLAN_STA_AUTH BIT(0)
-#define WLAN_STA_ASSOC BIT(1)
-#define WLAN_STA_PS BIT(2)
-#define WLAN_STA_TIM BIT(3) /* TIM bit is on for PS stations */
-#define WLAN_STA_PERM BIT(4) /* permanent; do not remove entry on expiration */
-#define WLAN_STA_AUTHORIZED BIT(5) /* If 802.1X is used, this flag is
-				    * controlling whether STA is authorized to
-				    * send and receive non-IEEE 802.1X frames
-				    */
-#define WLAN_STA_PENDING_POLL BIT(6) /* pending activity poll not ACKed */
-
-#define WLAN_RATE_1M BIT(0)
-#define WLAN_RATE_2M BIT(1)
-#define WLAN_RATE_5M5 BIT(2)
-#define WLAN_RATE_11M BIT(3)
-#define WLAN_RATE_COUNT 4
-
-/* Maximum size of Supported Rates info element. IEEE 802.11 has a limit of 8,
- * but some pre-standard IEEE 802.11g products use longer elements. */
-#define WLAN_SUPP_RATES_MAX 32
-
-/* Try to increase TX rate after # successfully sent consecutive packets */
-#define WLAN_RATE_UPDATE_COUNT 50
-
-/* Decrease TX rate after # consecutive dropped packets */
-#define WLAN_RATE_DECREASE_THRESHOLD 2
-
-struct sta_info {
-	struct list_head list;
-	struct sta_info *hnext; /* next entry in hash table list */
-	atomic_t users; /* number of users (do not remove if > 0) */
-	struct proc_dir_entry *proc;
-
-	u8 addr[6];
-	u16 aid; /* STA's unique AID (1 .. 2007) or 0 if not yet assigned */
-	u32 flags;
-	u16 capability;
-	u16 listen_interval; /* or beacon_int for APs */
-	u8 supported_rates[WLAN_SUPP_RATES_MAX];
-
-	unsigned long last_auth;
-	unsigned long last_assoc;
-	unsigned long last_rx;
-	unsigned long last_tx;
-	unsigned long rx_packets, tx_packets;
-	unsigned long rx_bytes, tx_bytes;
-	struct sk_buff_head tx_buf;
-	/* FIX: timeout buffers with an expiry time somehow derived from
-	 * listen_interval */
-
-	s8 last_rx_silence; /* Noise in dBm */
-	s8 last_rx_signal; /* Signal strength in dBm */
-	u8 last_rx_rate; /* TX rate in 0.1 Mbps */
-	u8 last_rx_updated; /* IWSPY's struct iw_quality::updated */
-
-	u8 tx_supp_rates; /* bit field of supported TX rates */
-	u8 tx_rate; /* current TX rate (in 0.1 Mbps) */
-	u8 tx_rate_idx; /* current TX rate (WLAN_RATE_*) */
-	u8 tx_max_rate; /* max TX rate (WLAN_RATE_*) */
-	u32 tx_count[WLAN_RATE_COUNT]; /* number of frames sent (per rate) */
-	u32 rx_count[WLAN_RATE_COUNT]; /* number of frames received (per rate)
-					*/
-	u32 tx_since_last_failure;
-	u32 tx_consecutive_exc;
-
-	struct lib80211_crypt_data *crypt;
-
-	int ap; /* whether this station is an AP */
-
-	local_info_t *local;
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	union {
-		struct {
-			char *challenge; /* shared key authentication
-					  * challenge */
-		} sta;
-		struct {
-			int ssid_len;
-			unsigned char ssid[MAX_SSID_LEN + 1]; /* AP's ssid */
-			int channel;
-			unsigned long last_beacon; /* last RX beacon time */
-		} ap;
-	} u;
-
-	struct timer_list timer;
-	enum { STA_NULLFUNC = 0, STA_DISASSOC, STA_DEAUTH } timeout_next;
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-};
-
-
-#define MAX_STA_COUNT 1024
-
-/* Maximum number of AIDs to use for STAs; must be 2007 or lower
- * (8802.11 limitation) */
-#define MAX_AID_TABLE_SIZE 128
-
-#define STA_HASH_SIZE 256
-#define STA_HASH(sta) (sta[5])
-
-
-/* Default value for maximum station inactivity. After AP_MAX_INACTIVITY_SEC
- * has passed since last received frame from the station, a nullfunc data
- * frame is sent to the station. If this frame is not acknowledged and no other
- * frames have been received, the station will be disassociated after
- * AP_DISASSOC_DELAY. Similarly, a the station will be deauthenticated after
- * AP_DEAUTH_DELAY. AP_TIMEOUT_RESOLUTION is the resolution that is used with
- * max inactivity timer. */
-#define AP_MAX_INACTIVITY_SEC (5 * 60)
-#define AP_DISASSOC_DELAY (HZ)
-#define AP_DEAUTH_DELAY (HZ)
-
-/* ap_policy: whether to accept frames to/from other APs/IBSS */
-typedef enum {
-	AP_OTHER_AP_SKIP_ALL = 0,
-	AP_OTHER_AP_SAME_SSID = 1,
-	AP_OTHER_AP_ALL = 2,
-	AP_OTHER_AP_EVEN_IBSS = 3
-} ap_policy_enum;
-
-#define PRISM2_AUTH_OPEN BIT(0)
-#define PRISM2_AUTH_SHARED_KEY BIT(1)
-
-
-/* MAC address-based restrictions */
-struct mac_entry {
-	struct list_head list;
-	u8 addr[6];
-};
-
-struct mac_restrictions {
-	enum { MAC_POLICY_OPEN = 0, MAC_POLICY_ALLOW, MAC_POLICY_DENY } policy;
-	unsigned int entries;
-	struct list_head mac_list;
-	spinlock_t lock;
-};
-
-
-struct add_sta_proc_data {
-	u8 addr[ETH_ALEN];
-	struct add_sta_proc_data *next;
-};
-
-
-typedef enum { WDS_ADD, WDS_DEL } wds_oper_type;
-struct wds_oper_data {
-	wds_oper_type type;
-	u8 addr[ETH_ALEN];
-	struct wds_oper_data *next;
-};
-
-
-struct ap_data {
-	int initialized; /* whether ap_data has been initialized */
-	local_info_t *local;
-	int bridge_packets; /* send packet to associated STAs directly to the
-			     * wireless media instead of higher layers in the
-			     * kernel */
-	unsigned int bridged_unicast; /* number of unicast frames bridged on
-				       * wireless media */
-	unsigned int bridged_multicast; /* number of non-unicast frames
-					 * bridged on wireless media */
-	unsigned int tx_drop_nonassoc; /* number of unicast TX packets dropped
-					* because they were to an address that
-					* was not associated */
-	int nullfunc_ack; /* use workaround for nullfunc frame ACKs */
-
-	spinlock_t sta_table_lock;
-	int num_sta; /* number of entries in sta_list */
-	struct list_head sta_list; /* STA info list head */
-	struct sta_info *sta_hash[STA_HASH_SIZE];
-
-	struct proc_dir_entry *proc;
-
-	ap_policy_enum ap_policy;
-	unsigned int max_inactivity;
-	int autom_ap_wds;
-
-	struct mac_restrictions mac_restrictions; /* MAC-based auth */
-	int last_tx_rate;
-
-	struct work_struct add_sta_proc_queue;
-	struct add_sta_proc_data *add_sta_proc_entries;
-
-	struct work_struct wds_oper_queue;
-	struct wds_oper_data *wds_oper_entries;
-
-	u16 tx_callback_idx;
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-	/* pointers to STA info; based on allocated AID or NULL if AID free
-	 * AID is in the range 1-2007, so sta_aid[0] corresponders to AID 1
-	 * and so on
-	 */
-	struct sta_info *sta_aid[MAX_AID_TABLE_SIZE];
-
-	u16 tx_callback_auth, tx_callback_assoc, tx_callback_poll;
-
-	/* WEP operations for generating challenges to be used with shared key
-	 * authentication */
-	struct lib80211_crypto_ops *crypt;
-	void *crypt_priv;
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-};
-
-
-void hostap_rx(struct net_device *dev, struct sk_buff *skb,
-	       struct hostap_80211_rx_status *rx_stats);
-void hostap_init_data(local_info_t *local);
-void hostap_init_ap_proc(local_info_t *local);
-void hostap_free_data(struct ap_data *ap);
-void hostap_check_sta_fw_version(struct ap_data *ap, int sta_fw_ver);
-
-typedef enum {
-	AP_TX_CONTINUE, AP_TX_DROP, AP_TX_RETRY, AP_TX_BUFFERED,
-	AP_TX_CONTINUE_NOT_AUTHORIZED
-} ap_tx_ret;
-struct hostap_tx_data {
-	struct sk_buff *skb;
-	int host_encrypt;
-	struct lib80211_crypt_data *crypt;
-	void *sta_ptr;
-};
-ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx);
-void hostap_handle_sta_release(void *ptr);
-void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb);
-int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr);
-typedef enum {
-	AP_RX_CONTINUE, AP_RX_DROP, AP_RX_EXIT, AP_RX_CONTINUE_NOT_AUTHORIZED
-} ap_rx_ret;
-ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev,
-			       struct sk_buff *skb,
-			       struct hostap_80211_rx_status *rx_stats,
-			       int wds);
-int hostap_handle_sta_crypto(local_info_t *local, struct ieee80211_hdr *hdr,
-			     struct lib80211_crypt_data **crypt,
-			     void **sta_ptr);
-int hostap_is_sta_assoc(struct ap_data *ap, u8 *sta_addr);
-int hostap_is_sta_authorized(struct ap_data *ap, u8 *sta_addr);
-int hostap_add_sta(struct ap_data *ap, u8 *sta_addr);
-int hostap_update_rx_stats(struct ap_data *ap, struct ieee80211_hdr *hdr,
-			   struct hostap_80211_rx_status *rx_stats);
-void hostap_update_rates(local_info_t *local);
-void hostap_add_wds_links(local_info_t *local);
-void hostap_wds_link_oper(local_info_t *local, u8 *addr, wds_oper_type type);
-
-#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
-void hostap_deauth_all_stas(struct net_device *dev, struct ap_data *ap,
-			    int resend);
-#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-#endif /* HOSTAP_AP_H */

drivers/net/wireless/intersil/hostap/hostap_config.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef HOSTAP_CONFIG_H
-#define HOSTAP_CONFIG_H
-
-/* In the previous versions of Host AP driver, support for user space version
- * of IEEE 802.11 management (hostapd) used to be disabled in the default
- * configuration. From now on, support for hostapd is always included and it is
- * possible to disable kernel driver version of IEEE 802.11 management with a
- * separate define, PRISM2_NO_KERNEL_IEEE80211_MGMT. */
-/* #define PRISM2_NO_KERNEL_IEEE80211_MGMT */
-
-/* Maximum number of events handler per one interrupt */
-#define PRISM2_MAX_INTERRUPT_EVENTS 20
-
-/* Include code for downloading firmware images into volatile RAM. */
-#define PRISM2_DOWNLOAD_SUPPORT
-
-/* Allow kernel configuration to enable download support. */
-#if !defined(PRISM2_DOWNLOAD_SUPPORT) && defined(CONFIG_HOSTAP_FIRMWARE)
-#define PRISM2_DOWNLOAD_SUPPORT
-#endif
-
-/* Allow kernel configuration to enable non-volatile download support. */
-#ifdef CONFIG_HOSTAP_FIRMWARE_NVRAM
-#define PRISM2_NON_VOLATILE_DOWNLOAD
-#endif
-
-/* Save low-level I/O for debugging. This should not be enabled in normal use.
- */
-/* #define PRISM2_IO_DEBUG */
-
-/* Following defines can be used to remove unneeded parts of the driver, e.g.,
- * to limit the size of the kernel module. Definitions can be added here in
- * hostap_config.h or they can be added to make command with ccflags-y,
- * e.g.,
- * 'make pccard ccflags-y="-DPRISM2_NO_DEBUG -DPRISM2_NO_PROCFS_DEBUG"'
- */
-
-/* Do not include debug messages into the driver */
-/* #define PRISM2_NO_DEBUG */
-
-/* Do not include /proc/net/prism2/wlan#/{registers,debug} */
-/* #define PRISM2_NO_PROCFS_DEBUG */
-
-/* Do not include station functionality (i.e., allow only Master (Host AP) mode
- */
-/* #define PRISM2_NO_STATION_MODES */
-
-#endif /* HOSTAP_CONFIG_H */

drivers/net/wireless/intersil/orinoco/Makefile

-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the orinoco wireless device drivers.
-#
-orinoco-objs := main.o fw.o hw.o mic.o scan.o wext.o hermes_dld.o hermes.o cfg.o
-
-obj-$(CONFIG_HERMES)		+= orinoco.o
-obj-$(CONFIG_PCMCIA_HERMES)	+= orinoco_cs.o
-obj-$(CONFIG_APPLE_AIRPORT)	+= airport.o
-obj-$(CONFIG_PLX_HERMES)	+= orinoco_plx.o
-obj-$(CONFIG_PCI_HERMES)	+= orinoco_pci.o
-obj-$(CONFIG_TMD_HERMES)	+= orinoco_tmd.o
-obj-$(CONFIG_NORTEL_HERMES)	+= orinoco_nortel.o
-obj-$(CONFIG_PCMCIA_SPECTRUM)	+= spectrum_cs.o
-obj-$(CONFIG_ORINOCO_USB)	+= orinoco_usb.o

drivers/net/wireless/intersil/orinoco/cfg.h

-/* cfg80211 support.
- *
- * See copyright notice in main.c
- */
-#ifndef ORINOCO_CFG_H
-#define ORINOCO_CFG_H
-
-#include <net/cfg80211.h>
-
-extern const struct cfg80211_ops orinoco_cfg_ops;
-
-void orinoco_wiphy_init(struct wiphy *wiphy);
-int orinoco_wiphy_register(struct wiphy *wiphy);
-
-#endif /* ORINOCO_CFG_H */

drivers/net/wireless/legacy/Makefile

-# 16-bit wireless PCMCIA client drivers
-obj-$(CONFIG_PCMCIA_RAYCS)	+= ray_cs.o
-obj-$(CONFIG_PCMCIA_WL3501)	+= wl3501_cs.o
-
-obj-$(CONFIG_USB_NET_RNDIS_WLAN)	+= rndis_wlan.o
-