arm64: dts: intel: socfpga_agilex: use defined GIC interrupt type for ECC

Use defined GIC interrupt type instead of hard-coded numbers for ECC
(Error Correction Code) memory, which creates edac sysfs interface.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

arch/arm64/boot/dts/intel/socfpga_agilex.dtsi

@@ -581,7 +581,7 @@ eccmgr {
 			sdramedac {
 				compatible = "altr,sdram-edac-s10";
 				altr,sdr-syscon = <&sdr>;
-				interrupts = <16 4>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			ocram-ecc@ff8cc000 {
@@ -589,7 +589,7 @@ ocram-ecc@ff8cc000 {
 					     "altr,socfpga-a10-ocram-ecc";
 				reg = <0xff8cc000 0x100>;
 				altr,ecc-parent = <&ocram>;
-				interrupts = <1 4>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			usb0-ecc@ff8c4000 {
@@ -597,7 +597,7 @@ usb0-ecc@ff8c4000 {
 					     "altr,socfpga-usb-ecc";
 				reg = <0xff8c4000 0x100>;
 				altr,ecc-parent = <&usb0>;
-				interrupts = <2 4>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			emac0-rx-ecc@ff8c0000 {
@@ -605,7 +605,7 @@ emac0-rx-ecc@ff8c0000 {
 					     "altr,socfpga-eth-mac-ecc";
 				reg = <0xff8c0000 0x100>;
 				altr,ecc-parent = <&gmac0>;
-				interrupts = <4 4>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			emac0-tx-ecc@ff8c0400 {
@@ -613,7 +613,7 @@ emac0-tx-ecc@ff8c0400 {
 					     "altr,socfpga-eth-mac-ecc";
 				reg = <0xff8c0400 0x100>;
 				altr,ecc-parent = <&gmac0>;
-				interrupts = <5 4>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sdmmca-ecc@ff8c8c00 {
@@ -621,8 +621,8 @@ sdmmca-ecc@ff8c8c00 {
 					     "altr,socfpga-sdmmc-ecc";
 				reg = <0xff8c8c00 0x100>;
 				altr,ecc-parent = <&mmc>;
-				interrupts = <14 4>,
-					     <15 4>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};